Accessories for Sanders
-
PFERD PFERD Fächerschleifer POLINOX PNL ( 4144155392 ) Ø40xH20mm Körnung 360 Schaft-Ø 6 mm
Wed, 09/10/2025
Scope of Delivery: Product Description: Technical Data: For commercial use, please observe the building regulations!
€17,16
-
PFERD PFERD flap disc POLINOX PNL ( 4144155391 ) Ø40xH20mm grit size 80 shank Ø 6 mm
Scope of Delivery: - 1x PFERD flap disc Ø40xH20mm grit size 80 Product Description: Aluminium oxide A - radial arrangement of the non-woven material in lamellar form, whereby the lamellae of these polishing tools are extremely densely packed and thus achieve a long service life - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - grit size: 80 - Max. speed: 15000 min-¹ - Abrasive: Aluminium oxide A - Material: Aluminium - Ø: 40 mm - Height: 20 mm - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
-
PFERD PFERD flap disc X-LOCK PSF Z STEELOX ( 4000840252 ) Ø 125 mm grain size 40 conical
Wed, 09/10/2025
Scope of Delivery: - 1x PFERD flap disc Ø 125 mm grain size 40 conical Product Description: Zirconium aluminium oxide Z - for steel and stainless steel (INOX) with aggressive cutting performance and good tool life - with X-LOCK holder for quick and easy tool changes Technical Data: - Bore: 22.23mm - Drive type: Cordless angle grinder, angle grinder - Recommended use: Place the tool on the X-LOCK clamping system of your angle grinder and secure it by pressing it down lightly. The tool engages audibly. Release the tool by pressing the lever. - Mounting system: X-LOCK - Machinable materials: Steel, stainless steel (INOX) - Note: PFERDERGONOMICS recommends POLIFAN flap discs in order to sustainably reduce the vibration, noise and dust generated during use and to noticeably improve working comfort. PFERDEFFICIENCY recommends POLIFAN flap discs for perfect results in the shortest possible time. - Advantages: Secure fixing thanks to audible click of the tool. With X-LOCK holder for quick and easy tool changes, also suitable for low-power angle grinders. Good tool life. Fast work progress and high efficiency thanks to high cutting performance. POLIFAN flap discs with X-LOCK can also be used on conventional angle grinders with M14 and 5/8"-11 threads. - Shape: conical - Ø: 125 mm - grit size: 40 - Max. speed: 12200 min-¹ - Material suitability INOX: very suitable - Abrasive: Zirconium aluminium oxide Z - Area of application: INOX - Material suitability steel: very suitable - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€55,97
-
PFERD PFERD flap disc TRIM STEELOX ( 8001720489 ) Ø 125 mm grain size 60 PFC / B / T29
Wed, 09/10/2025
Scope of Delivery: - 1x PFERD flap disc Ø 125 mm grain size 60 PFC / B / T29 Product Description: Zirconium aluminium oxide Z - for steel - with plastic backing pad for resetting/trimming the tool - bore 22.23 mm Ø Technical Data: - Bore: 22,23mm - Drive type: Angle grinder - Recommended use: Also suitable for surface grinding on steel. Trim the flap disc on sharp metal edges, files or with indexable inserts. Trimming may only be carried out at an angle of 45°. Position the tool carefully and increase the pressure until a chip is created. Hold the pressure until the tool has been trimmed to the desired size. The support disc may be set back a maximum of 5 mm beyond the lamellae. - Mounting system: Bore - Machinable materials: Steel, stainless steel (INOX) - Note: PFERDERGONOMICS recommends POLIFAN flap discs in order to sustainably reduce the vibration, noise and dust generated during use and to noticeably improve working comfort. PFERDEFFICIENCY recommends POLIFAN flap discs for perfect results in the shortest possible time. - Advantages: Fast work progress and maximum efficiency thanks to aggressive cutting performance. Resetting/trimming of the tool is possible without any problems. Fewer tool changes due to outstanding tool life. Maximum aggressiveness over the entire service life. - Shape: PFC / B / T29 - Ø: 125 mm - grit size: 60 - Max. speed: 12200 min-¹ - Material suitability INOX: very suitable - Abrasive: Zirconium aluminium oxide Z - Application: Steel / stainless steel - Material suitability steel: very suitable - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€66,93
-
PFERD PFERD flap disc ( 4000843046 ) Ø10xH10mm grit 120 shank Ø 3 mm
Wed, 09/10/2025
Scope of Delivery: - 1x PFERD flap disc Ø10xH10mm grit size 120 Product Description: Resin bond - universally applicable - also suitable for machining brass, copper and zinc - shank Ø 3 mm Technical Data: - Shank Ø: 3mm - Drive type: Flexible shaft drive, straight grinder - Application recommendation: The removal rate should be increased by using a coarser grit and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure makes the surface slightly coarser. The softer the material to be machined, the coarser the surface (when using - Machinable materials: Steels up to 1,200 N/mm² ( 54 HRC - Machining tasks: Weld seam processing, surface processing, structuring (matting, line matting and satin finishing), levelling, fine grinding in stages, deburring - Width: 10mm - Note: PFERDERGONOMICS recommends flap discs in order to sustainably reduce the vibration and noise generated during use and to improve working comfort. - Length, shaft: 40mm - RPM, opt.: 38000RPM - Safety instructions: For safety reasons, the specified maximum permissible speed must never be exceeded. The contact pressure must be significantly reduced if the specified optimum speed is exceeded. Safety is only guaranteed if the clamping length is at least 15 mm and the specified maximum speed is not exceeded with open shank lengths. - Advantages: Optimum contour adaptation due to high flexibility. Can be used very close to edges and at angles due to flat casting core design. Consistently high material removal rate over the entire service life, as new, aggressive abrasive is constantly released. - grit size: 120 - Max. speed: 75000 min-¹ - Abrasive: Aluminium oxide A - Material suitability Aluminium: limited suitability - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material: Aluminium oxide - Ø: 10 mm - Height: 10 mm - Material suitability plastic: limited suitabilityPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
€11,04
-
PFERD PFERD flap disc TRIM STEELOX ( 8001720490 ) Ø 125 mm grain size 80 PFC / B / T29
Scope of Delivery: - 1x PFERD flap disc Ø 125 mm grain size 80 PFC / B / T29 Product Description: Zirconium aluminium oxide Z - for steel - with plastic backing pad for resetting/trimming the tool - bore 22.23 mm Ø Technical Data: - Bore: 22,23mm - Drive type: Angle grinder - Recommendation for use: The support disc may be set back a maximum of 5 mm so that the flaps protrude. Position the tool carefully and increase the pressure until a chip is created. Hold the pressure until the tool has been trimmed to the desired size. Trimming may only be carried out at an angle of 45°. Trim the flap disc on sharp metal edges, files or with indexable inserts. Also suitable for surface grinding on steel. - Mounting system: Bore - Machinable materials: Stainless steel (INOX), steel - Note: PFERDERGONOMICS recommends POLIFAN flap discs in order to sustainably reduce the vibration, noise and dust generated during use and to noticeably improve working comfort. PFERDEFFICIENCY recommends POLIFAN flap discs for perfect results in the shortest possible time. - Advantages: Fast work progress and maximum efficiency thanks to aggressive cutting performance. Maximum aggressiveness over the entire service life. Fewer tool changes thanks to outstanding tool life. Resetting/trimming of the tool is possible without any problems. - Shape: PFC / B / T29 - Ø: 125 mm - grit size: 80 - Max. speed: 12200 min-¹ - Material suitability INOX: very suitable - Abrasive: Zirconium aluminium oxide Z - Application: Steel / stainless steel - Material suitability steel: very suitable - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
-
Sonstige Multifunctional accessory set ( 4000843571 ) DxHmm 3 mm
Wed, 09/10/2025
Scope of Delivery: - 1x multifunctional accessory set DxHmm 3 mm Product Description: Shank Ø 3 mm - for multi-grinder, for milling, grinding, brushing, derusting, polishing, engraving and cutting Contents: 30 cutting discs (red) / grit 120, 30 cutting discs (black) / grit 120, 30 cutting discs (red) / grit 120 / diameter = 20mm, 11 grinding tools, 10 fibreglass cutting discs (black) / grit 120 / diameter = 32mm, 10 grinding rollers / grit 120 / diameter = 12.7mm, 10 grinding rollers / grit 120 / diameter = 6.4mm, 10 felt polishers / conical, 10 felt polishers / round, 7 felt polishers / round / diameter = 25mm, 6 grinding discs (pink) / grit 120, 6 grinding discs (blue) / grit 120, 4 diamond grinders / various shapes, 4 grinding wheels / various shapes, 3 HSS drill bits 2.0mm / 2.3mm / 3.2mm, 3 brass brushes, 3 stainless steel brushes, 3 plastic brushes, 2 mandrels for grinding rollers / diameter = 6.4mm + 12.7mm, 2 mandrels for cutting discs, 2 round shank chisels round / cylindrical, 2 mandrels for felt heads, 1 dressing stone / 120 grit, 1 polishing paste Technical Data: - Shank Ø: 3 mm - Content: 200 piecesPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
€31,96
-
KLINGSPOR Klingspor flap disc non-woven NFS 600 ( 8000353934 ) D80xH50mm 6 mm
Wed, 09/10/2025
Scope of Delivery: - 1x KLINGSPOR flap disc fleece D80xH50mm 6 mm Product Description: Suitable for universal metal and stainless steel - Uniform finish over the entire service life - Optimum tool for matting and satin finishing thanks to high-quality non-woven lamellas Technical Data: - Area of application: Universal metal, stainless steel - Width: 50mm - Maximum speed: 32m/s - Type of use: Straight grinder, Drill, Flexible shaft - Type of packaging: Cardboard box - Fleece colour: red-brown - Fleece grain type: Aluminium oxide - Grit size: medium - Shaft Ø: 6 mm - max. speed: 7600 min-¹ - Bonding: Synthetic resin - Material suitability INOX: very suitable - Brand: KLINGSPOR - Material: corundum - Ø: 80 mm - Height: 50 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€145,18
-
KLINGSPOR Klingspor Fächerschleifer Vlies NFS 600 ( 8000353933 ) D80xH50mm 6 mm
Lieferumfang:- 1x KLINGSPOR Fächerschleifer Vlies D80xH50mm 6 mmProduktbeschreibung:geeignet für Metall Universal und Edelstahl · gleichmäßiges Finish über gesamte Lebensdauer · optimales Werkzeug zum Mattieren und Satinieren durch hochwertige VlieslamellenTechnische Daten:- Anwendungsgebiet: Metall Universal, Edelstahl - Breite: 50mm - Höchstgeschwindigkeit: 32m/s - Nutzungsart: Geradschleifer, Bohrmaschine, Biegsame Welle - Verpackungsart: Karton - Vlies-Farbe: rotbraun - Vlies-Kornart: Korund- Körnung: coarse - Schaft-Ø: 6 mm- max. Drehzahl: 7600 min-¹- Bindung: Kunstharz - Werkstoffeignung INOX: sehr gut geeignet - Marke: KLINGSPOR - Material: Korund - Ø: 80 mm- Höhe: 50 mmBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!
-
KLINGSPOR Klingspor flap disc non-woven NFS 600 ( 8000353931 ) D60xH50mm 6 mm
Wed, 09/10/2025
Scope of Delivery: - 1x KLINGSPOR flap disc fleece D60xH50mm 6 mm Product Description: Suitable for universal metal and stainless steel - Uniform finish over the entire service life - Optimum tool for matting and satin finishing thanks to high-quality non-woven lamellas Technical Data: - Area of application: Universal metal, stainless steel - Width: 50mm - Maximum speed: 32m/s - Type of use: Straight grinder, Drill, Flexible shaft - Type of packaging: Cardboard box - Fleece colour: red-brown - Fleece grain type: Aluminium oxide - Grit size: medium - Shaft Ø: 6 mm - max. speed: 10200 min-¹ - Bonding: Synthetic resin - Material suitability INOX: very suitable - Brand: KLINGSPOR - Material: corundum - Ø: 60 mm - Height: 50 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€117,65
-
KLINGSPOR Klingspor Fächerschleifer Vlies NFS 600 ( 8000353932 ) D60xH50mm 6 mm
Lieferumfang:- 1x KLINGSPOR Fächerschleifer Vlies D60xH50mm 6 mmProduktbeschreibung:geeignet für Metall Universal und Edelstahl · gleichmäßiges Finish über gesamte Lebensdauer · optimales Werkzeug zum Mattieren und Satinieren durch hochwertige VlieslamellenTechnische Daten:- Anwendungsgebiet: Metall Universal, Edelstahl - Breite: 50mm - Höchstgeschwindigkeit: 32m/s - Nutzungsart: Geradschleifer, Bohrmaschine, Biegsame Welle - Verpackungsart: Karton - Vlies-Farbe: rotbraun - Vlies-Kornart: Korund- Körnung: very fine - Schaft-Ø: 6 mm- max. Drehzahl: 10200 min-¹- Bindung: Kunstharz - Werkstoffeignung INOX: sehr gut geeignet - Marke: KLINGSPOR - Material: Korund - Ø: 60 mm- Höhe: 50 mmBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!
-
KLINGSPOR Klingspor Fächerschleifer Vlies NFS 600 ( 8000353930 ) D60xH50mm 6 mm
Lieferumfang:- 1x KLINGSPOR Fächerschleifer Vlies D60xH50mm 6 mmProduktbeschreibung:geeignet für Metall Universal und Edelstahl · gleichmäßiges Finish über gesamte Lebensdauer · optimales Werkzeug zum Mattieren und Satinieren durch hochwertige VlieslamellenTechnische Daten:- Anwendungsgebiet: Metall Universal, Edelstahl - Breite: 50mm - Höchstgeschwindigkeit: 32m/s - Nutzungsart: Geradschleifer, Bohrmaschine, Biegsame Welle - Verpackungsart: Karton - Vlies-Farbe: rotbraun - Vlies-Kornart: Korund- Körnung: coarse - Schaft-Ø: 6 mm- max. Drehzahl: 10200 min-¹- Bindung: Kunstharz - Werkstoffeignung INOX: sehr gut geeignet - Marke: KLINGSPOR - Material: Korund - Ø: 60 mm- Höhe: 50 mmBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"