Accessories for Sanders

Show previous products

• 

  PFERD PFERD sanding sleeve ( 4144210140 ) D30xW30mm30 mm grit 40 max. speed 19100 min-¹

  Mon, 11/17/2025

  Scope of Delivery: - 1x PFERD sanding sleeve D30xW30mm30 mm grit size 40 Product Description: Aluminium oxide A - for universal use from coarse to fine sanding - supplied without rubber backing Technical Data: - Drive type: Straight grinder, flexible shaft drive - Application recommendation: For easy replacement of the sanding sleeves, pull them on and off with a slight clockwise rotation. Keep the abrasive sleeve holder clamped in the tool drive. For a secure fit of the abrasive sleeve, maintain the minimum speed of the abrasive sleeve carrier. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 20-30 m/s. - Machinable materials: Bronze, brass, aluminium, malleable cast iron, fibre-reinforced thermosetting plastics (GRP, CFRP), copper, grey/spheroidal cast iron (GG/GJL, GGG/GJS), hardened, tempered steels over 1,200 N/mm² ( 54 HRC, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €85,84

• 

  PFERD PFERD sanding sleeve ( 4144210082 ) D22xW20mm20 mm grit size 80 max. speed 26000 min-¹

  Mon, 11/17/2025

  Scope of Delivery: - 1x PFERD sanding sleeve D22xW20mm20 mm grit size 80 Product Description: Aluminium oxide A - for universal use from coarse to fine sanding - supplied without rubber backing Technical Data: - Drive type: Flexible shaft drive, straight grinder - Application recommendation: For easy replacement of the sanding sleeves, pull them on and off with a slight clockwise rotation. Keep the abrasive sleeve holder clamped in the tool drive. For a secure fit of the abrasive sleeve, maintain the minimum speed of the abrasive sleeve carrier. For best performance, use at a recommended cutting speed of 20-30 M/s. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. - Machinable materials: Grey/spheroidal cast iron (GG/GJL, GGG/GJS), steels up to 1,200 N/mm² ( 54 HRC, stainless steel (INOX), hardened, tempered steels over 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €56,68

• 

  PFERD PFERD sanding sleeve ( 4144210080 ) D22xW20mm20 mm grit 60 max. speed 26000 min-¹

  Mon, 11/17/2025

  Scope of Delivery: - 1x PFERD sanding sleeve D22xW20mm20 mm grit size 60 Product Description: Aluminium oxide A - for universal use from coarse to fine sanding - supplied without rubber backing Technical Data: - Drive type: Flexible shaft drive, straight grinder - Application recommendation: For best performance, use at a recommended cutting speed of 20-30 m/s. For an easy change of the abrasive sleeves, mount and remove them with a slight clockwise rotation. Keep the abrasive sleeve holder clamped in the tool drive. For a secure fit of the abrasive sleeve, maintain the minimum speed of the abrasive sleeve carrier. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. - Machinable materials: Aluminium, steels up to 1,200 N/mm² ( 54 HRC, stainless steel (INOX), hardened, tempered steels over 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €56,68

• 

  Options

  PFERD PFERD sanding sleeve ( 4144210054 ) D15xW30mm30 mm grit 150 max. speed 36000 min-¹

  Scope of Delivery: - 1x PFERD sanding sleeve D15xW30mm30 mm grit 150 Product Description: Aluminium oxide A - for universal use from coarse to fine sanding - supplied without rubber backing Technical Data: - Drive type: Flexible shaft drive, straight grinder - Application recommendation: For easy replacement of the sanding sleeves, pull them on and off with a slight clockwise rotation. Keep the abrasive sleeve holder clamped in the tool drive. For a secure fit of the abrasive sleeve, maintain the minimum speed of the abrasive sleeve carrier. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 20-30 m/s. - Machinable materials: Aluminium, grey/spheroidal graphite cast iron (GG/GJL, GGG/GJS), hardened, tempered steels over 1,200 N/mm² ( 54 HRC - Machining tasks: Weld seam processing, levelling, edge processing, sharpening, roughening, fine grinding in stages, deburring, surface processing - Ordering information: Please order abrasive sleeve holder separately. - Ø inside: 15mm - RPM, opt., up to: 36000RPM - RPM, opt., from: 26000RPM - Safety instructions: The maximum permissible peripheral speed is 30 m/s. For safety reasons, the specified maximum permissible speed must never be exceeded. Do not allow the abrasive sleeves to protrude beyond the abrasive sleeve holder. - Advantages: Secure fit of the abrasive sleeve on the abrasive sleeve carrier due to expansion of the carrier during use. Maximum efficiency thanks to particularly high material removal and high abrasive aggressiveness. Outstanding service life thanks to special manufacturing process - even under the toughest operating conditions. - Grit size: 150 - Max. speed: 36000 min-¹ - Width: 30 mm - Material suitability INOX: very suitable - Material suitability aluminium: very suitable - Material suitability steel: very suitable - Material: Aluminium oxide A - Ø: 15 mm - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €76,12

  Options

• 

  PFERD PFERD sanding sleeve ( 4144210050 ) D15xW30mm30 mm grit 60 max. speed 36000 min-¹

  Mon, 11/17/2025

  Scope of Delivery: - 1x PFERD sanding sleeve D15xW30mm30 mm grit size 60 Product Description: Aluminium oxide A - for universal use from coarse to fine sanding - supplied without rubber backing Technical Data: - Drive type: Straight grinder, flexible shaft drive - Recommendation for use: For easy replacement of the sanding sleeves, pull them on and off with a slight clockwise rotation. Leave the abrasive sleeve holder clamped in the tool drive. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 20-30 m/s. For a secure fit of the abrasive sleeve, observe the minimum speed of the abrasive sleeve holder. - Machinable materials: Fibre-reinforced thermosetting plastics (GRP, CFRP), brass, bronze, cast steel, aluminium, copper, malleable cast iron, hardened, tempered steels over 1,200 N/mm² ( 54 HRC, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €76,12

• 

  Options

  PFERD PFERD Schleifhülse ( 4144210032 ) D13xB25mm25 mm Körnung 150 max. Drehzahl 44000 min-¹

  Lieferumfang:- 1x PFERD Schleifhülse D13xB25mm25 mm Körnung 150Produktbeschreibung:Korund A · für den universellen Einsatz von Grob- bis Feinschliff · Lieferung ohne GummiträgerTechnische Daten:- Antriebsart: Biegwellenantrieb, Geradschleifer - Anwendungsempfehlung: Für den Werkstoff geeignetes Schleiföl verwenden, um die Standzeit und Schleifleistung der Werkzeuge deutlich zu erhöhen. Für beste Leistung bei einer empfohlenen Schnittgeschwindigkeit von 20-30 m/s einsetzen. Für einen sicheren Sitz der Schleifhülse die Mindestdrehzahl des Schleifhülsenträgers einhalten. Für einen leichten Wechsel der Schleifhülsen diese unter leichter Rechtsdrehung auf- und abziehen. Dabei den Schleifhülsenträger in den Werkzeugantrieb eingespannt lassen. - Bearbeitbare Werkstoffe: Stähle bis 1.200 N/mm² (< 38 HRC), Bronze, Stahlguss, Kobaltbasislegierungen, Kupfer, Faserverstärkte Duroplaste (GFK, CFK), Grau-/Sphäroguss (GG/GJL, GGG/GJS), Gehärtete, vergütete Stähle über 1.200 N/mm² (< 38 HRC), Stahlwerkstoffe mit einer Härte > 54 HRC, Temperguss, Thermoplaste, Aluminium, Edelstahl (INOX), Messing - Bearbeitungsaufgaben: Flächenbearbeitung, Aufrauen, Schärfen, Schweißnahtbearbeitung, Stufenweises Feinschleifen, Entgraten, Kantenbearbeitung, Egalisieren - Bestellhinweise: Schleifhülsenträger bitte separat bestellen. - Ø Innen: 13mm - RPM, opt., bis: 44000RPM - RPM, opt., von: 30000RPM - Sicherheitshinweise: Die maximal zulässige Umfangsgeschwindigkeit beträgt 30 m/s. Die angegebene maximal zulässige Drehzahl darf aus Sicherheitsgründen nie überschritten werden. Schleifhülsen nicht über den Schleifhülsenträger überstehen lassen. - Vorteile: Herausragende Standzeit durch spezielles Fertigungsverfahren – auch unter härtesten Einsatzbedingungen. Höchste Wirtschaftlichkeit durch besonders hohen Materialabtrag und hohe Aggressivität des Schleifmittels. Sicherer Sitz der Schleifhülse auf dem Schleifhülsenträger durch Ausdehnen des Trägers im Einsatz.- Körnung: 150 - max. Drehzahl: 44000 min-¹- Breite: 25 mm- Werkstoffeignung INOX: sehr gut geeignet - Werkstoffeignung Aluminium: sehr gut geeignet - Werkstoffeignung Stahl: sehr gut geeignet - Material: Korund A - Ø: 13 mm- Marke: PFERDBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!

  Read more less

  Pre-order

  €74,50

  Options

• 

  PFERD PFERD sanding sleeve ( 4144210052 ) D15xW30mm30 mm grit size 80 max. speed 36000 min-¹

  Mon, 11/17/2025

  Scope of Delivery: - 1x PFERD sanding sleeve D15xW30mm30 mm grit size 80 Product Description: Aluminium oxide A - for universal use from coarse to fine sanding - supplied without rubber backing Technical Data: - Drive type: Straight grinder, flexible shaft drive - Application recommendation: For best performance, use at a recommended cutting speed of 20-30 m/s. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For a secure fit of the abrasive sleeve, maintain the minimum speed of the abrasive sleeve carrier. To make it easy to change the sanding sleeves, turn them slightly clockwise to fit and remove them. Keep the abrasive sleeve carrier clamped in the tool drive. - Machinable materials: Steel materials with a hardness > 54 HRC, aluminium, malleable cast iron, brass, bronze, cast steel, cobalt-based alloys, copper, fibre-reinforced thermosets (GRP, CFRP), grey/spheroidal graphite cast iron (GG/GJL, GGG/GJS), stainless steel (INOX), steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €76,12

• 

  PFERD PFERD sanding sleeve ( 4144210030 ) D13xW25mm25 mm grit size 80 max. speed 44000 min-¹

  Mon, 11/17/2025

  Scope of Delivery: - 1x PFERD abrasive sleeve D13xW25mm25 mm grit size 80 Product Description: Aluminium oxide A - for universal use from coarse to fine sanding - supplied without rubber backing Technical Data: - Drive type: Straight grinder, flexible shaft drive - Application recommendation: For a secure fit of the abrasive sleeve, observe the minimum speed of the abrasive sleeve carrier. For easy replacement of the abrasive sleeves, mount and remove them by turning them slightly clockwise. Keep the abrasive sleeve carrier clamped in the tool drive. For best performance, use at a recommended cutting speed of 20-30 m/s. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. - Machinable materials: Stainless steel (INOX), cobalt-based alloys, copper, fibre-reinforced thermosets (GRP, CFRP), thermoplastics, hardened, tempered steels over 1,200 N/mm² ( 54 HRC, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €74,50

• 

  Options

  PFERD PFERD sanding sleeve ( 4144210008 ) D10xW20mm20 mm grit 150 max. speed 44000 min-¹

  Scope of Delivery: - 1x PFERD abrasive sleeve D10xW20mm20 mm grit 150 Product Description: Aluminium oxide A - for universal use from coarse to fine sanding - supplied without rubber backing Technical Data: - Drive type: Straight grinder, flexible shaft drive - Application recommendation: For a secure fit of the abrasive sleeve, observe the minimum speed of the abrasive sleeve carrier. To make it easy to change the abrasive sleeves, turn them slightly clockwise to mount and remove them. Keep the abrasive sleeve carrier clamped in the tool drive. For best performance, use at a recommended cutting speed of 20-30 m/s. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. - Machinable materials: Stainless steel (INOX), aluminium, thermoplastics, steels up to 1,200 N/mm² ( 54 HRC, hardened, tempered steels over 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €76,12

  Options

• 

  PFERD PFERD sanding sleeve ( 4144210037 ) D15xW30mm30 mm grit size 50 max. speed 36000 min-¹

  Mon, 11/17/2025

  Scope of Delivery: - 1x PFERD sanding sleeve D15xW30mm30 mm grit size 50 Product Description: Aluminium oxide A - for universal use from coarse to fine sanding - supplied without rubber backing Technical Data: - Drive type: Straight grinder, flexible shaft drive - Application recommendation: For easy replacement of the sanding sleeves, pull them on and off with a slight clockwise rotation. Leave the abrasive sleeve holder clamped in the tool drive. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 20-30 m/s. For a secure fit of the abrasive sleeve, observe the minimum speed of the abrasive sleeve holder. - Machinable materials: Bronze, cast steel, cobalt-based alloys, aluminium, malleable cast iron, thermoplastics, brass, copper, fibre-reinforced thermosets (GRP, CFRP), grey/spheroidal graphite cast iron (GG/GJL, GGG/GJS), hardened, tempered steels over 1,200 N/mm² ( 54 HRC, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €76,12

• 

  Options

  PFERD PFERD sanding sleeve ( 4144210007 ) D10xW20mm20 mm grit size 80 max. speed 44000 min-¹

  Scope of Delivery: - 1x PFERD sanding sleeve D10xW20mm20 mm grit size 80 Product Description: Aluminium oxide A - for universal use from coarse to fine sanding - supplied without rubber backing Technical Data: - Drive type: Flexible shaft drive, straight grinder - Application recommendation: For easy replacement of the sanding sleeves, pull them on and off with a slight clockwise rotation. Keep the abrasive sleeve holder clamped in the tool drive. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 20-30 m/s. For a secure fit of the abrasive sleeve, observe the minimum speed of the abrasive sleeve holder. - Machinable materials: Grey/spheroidal cast iron (GG/GJL, GGG/GJS), aluminium, malleable cast iron, brass, cobalt-based alloys, copper, bronze, hardened, tempered steels over 1,200 N/mm² ( 54 HRC, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!).For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €76,12

  Options

• 

  Options

  PFERD PFERD Schleifhülse GSB D45xB30mm30 mm Körnung 40 ( 8000433900 )

  Lieferumfang:1x PFERD Schleifhülse GSB D45xB30mm30 mm Körnung 40Produktbeschreibung: für grobe Schleifaufgaben bei hoher Abtragsleistung und Standzeit · GSB = Großpack Schleifhülsen · Lieferung ohne Gummiträger Weitere technische Daten: Antriebsart: Biegwellenantrieb, Geradschleifer Anwendungsempfehlung: Für einen sicheren Sitz der Schleifhülse die Mindestdrehzahl des Schleifhülsenträgers einhalten. Für einen leichten Wechsel der Schleifhülsen diese unter leichter Rechtsdrehung auf- und abziehen. Dabei den Schleifhülsenträger in den Werkzeugantrieb eingespannt lassen. Für den Werkstoff geeignetes Schleiföl verwenden, um die Standzeit und Schleifleistung der Werkzeuge deutlich zu erhöhen. Für beste Leistung bei einer empfohlenen Schnittgeschwindigkeit von 20-30 m/s einsetzen. Bearbeitbare Werkstoffe: Stahlwerkstoffe mit einer Härte > 54 HRC, Gehärtete, vergütete Stähle über 1.200 N/mm² (< 38 HRC), Stahlguss, Stähle bis 1.200 N/mm² (< 38 HRC), Edelstahl (INOX), Temperguss, Messing, Grau-/Sphäroguss (GG/GJL, GGG/GJS), Bronze, Kupfer, Kobaltbasislegierungen, Titan Bearbeitungsaufgaben: Kantenbearbeitung, Stufenweises Feinschleifen, Flächenbearbeitung, Schärfen, Aufrauen, Egalisieren, Schweißnahtbearbeitung, Entgraten Bestellhinweise: Schleifhülsenträger bitte separat bestellen. Ø Innen: 45mm RPM, opt., bis: 12700RPM RPM, opt., von: 8500RPM Sicherheitshinweise: Die maximal zulässige Umfangsgeschwindigkeit beträgt 30 m/s. Die angegebene maximal zulässige Drehzahl darf aus Sicherheitsgründen nie überschritten werden. Schleifhülsen nicht über den Schleifhülsenträger überstehen lassen. Vorteile: Herausragende Standzeit durch spezielles Fertigungsverfahren – auch unter härtesten Einsatzbedingungen. Höchste Wirtschaftlichkeit durch besonders hohen Materialabtrag und hohe Aggressivität des Schleifmittels. Sicherer Sitz der Schleifhülse auf dem Schleifhülsenträger durch Ausdehnen des Trägers im Einsatz.

  Read more less

  Pre-order

  €127,96

  Options

Show more products