Products

Show previous products

• 

  BENNING BENNING phase/magnetic field tester VT 2 1-pole ( 4000828953 )

  Wed, 11/26/2025

  Scope of Delivery: - Phase/magnetic field tester VT 2 1-pole - Delivery incl. batteries (2 x type AAA), pin clip, spare battery see art. 4000 901 810 Product Description: non-contact operation - 1-pole phase tester with red LED test probe and increasing buzzer frequency - phase testing on sockets, junction boxes, switches, cables and lamps, etc. - testing of insulated cables, such as cable reels, fairy lights, for cable breakage - voltage 12 - 1000 V AC - 12 V voltage range can be switched on via push-button - capacitive measuring method - testing of magnetic fields (permanent, (permanent, AC and DC induced), solenoid valves in pneumatic and hydraulic systems, heating systems and pumps, relays/contactors in vehicles, machines, devices and control systems - Magnetic field display via green LED test probe - Integrated test magnet for functional testing - Cable break detector - Cat IV 600 V, Cat III 1000 V - IP53 - Length 153 mm - Tip length 12 mm - Blade width 3 mm Technical Data: - Batteries: 2 x AAA - Protection class: IP53Note on the disposal of batteries and rechargeable batteries - As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the German Battery Act (BattG) to inform you of the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €70,18

• 

  BENNING Benning test badges ( 4000828886 ) Ø 30 mm

  Wed, 11/26/2025

  Scope of Delivery: - 1x BENNING inspection sticker Ø 30 mm Product Description: for marking the next inspection date - self-adhesive - similar to illustration PU = 1 roll with 300 inspection stickers Technical Data: - Packaging: Roll - Ø: 30 mm - Quantity: 300 pcs. - Brand: BENNINGFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €86,58

• 

  BENNING Benning voltage/continuity tester DUSPOL(R) digital + premium case HardCas ( 4000828969 ) 1-1000 V AC/1-1200 V DC CAT IV 600V/CAT III 1000 V

  Wed, 11/26/2025

  Scope of Delivery: - 1x BENNING voltage/continuity tester 1-1000 V AC/1-1200 V DC - Delivery incl. premium case, batteries (2 x type AAA), spare batteries see art. no. 4000 901 810 Product Description: incl. practical HardCase bag with carrying handle, counter-rotating zip (outside), padded inner mesh pocket with zip, flexible fastening loops with Velcro fastener - high protection despite low weight - with digital display, with resistance/frequency range - voltage test from 1 V - 1000 V AC TRUE RMS/ 1200 V DC (LCD) - optical, acoustic continuity test up to 100 kΩ (yellow LED) - resistance measurement 0.1 kΩ - 300 kΩ (LCD) - diode test 0,3 V - 2 V (LCD) - rotary field direction (green LED), phase test (red LED) - polarity test (LCD) - frequency measurement 1 Hz - 1000 Hz - direct display without push-button actuation (high resistance) - load connection via push-button (low resistance) - conscious triggering of the RCD - vibration alarm - measuring point and display illumination - cable break detector - protection class IP65 (dustproof/protected against water jets) - housing with rubberised grip surface - CAT IV 600 V, CAT III 1000 V - incl. 2 batteries (voltage display from 50 V even with empty batteries!) - approved to DIN EN 61243-3, VDE 0682-401 Technical Data: - Mode of operation: two-pole - Protection class: IP65 - Continuity test: LED/buzzer - subject to testing: yes - Nominal voltage range: 1-1000 V AC/1-1200 V DC - Brand: BENNING - Measurement category: CAT IV 600V/CAT III 1000 V - Model: 050264Note on the disposal of batteries and rechargeable batteries As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the Battery Act (BattG) to draw your attention to the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €139,59

• 

  BENNING BENNING voltage/continuity tester DUSPOL(R) digital 1-1000 V AC/1-1200 V DC ( 4000828830 )

  Wed, 11/26/2025

  Scope of Delivery: - Voltage/continuity tester DUSPOL® digital 1-1000 V AC/1-1200 V DC - Supplied with batteries (2 x type AAA), for replacement batteries see art. no. 4000 901 810 Product Description: with digital display, with resistance/frequency range - voltage test from 1 V - 1000 V AC TRUE RMS/ 1200 V DC (LCD) - optical, acoustic continuity test up to 100 kΩ (yellow LED) - resistance measurement 0.1 kΩ - 300 kΩ (LCD) - diode test 0.3 V - 2 V (LCD) - rotary field direction (green LED), phase test (red LED) - polarity test (LCD) - frequency measurement 1 Hz - 1000 Hz - direct display without push-button actuation (high resistance) - load connection via push-button (low resistance) - deliberate triggering of the RCD - vibration alarm - measuring point and display illumination - cable break detector - protection class IP65 (dustproof/protected against water jets) - housing with rubberised grip surface - CAT IV 600 V, CAT III 1000 V - incl. 2 batteries (voltage display from 50 V even with empty batteries!) - approved to DIN EN 61243-3, VDE 0682-401 Technical Data: - Mode of operation: two-pole - Protection class: IP65 - Continuity test: LED/buzzerNote on the disposal of batteries and rechargeable batteries - As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the German Battery Act (BattG) to inform you of the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €128,74

• 

  BENNING BENNING voltage/continuity tester DUSPOL(R) expert 12-1000 V AC/DC ( 4000828828 )

  Wed, 11/26/2025

  Scope of Delivery: - Voltage/continuity tester DUSPOL® expert 12-1000 V AC/DC - Supplied with batteries (2 x 1.5 V micro batteries, type AAA), for replacement batteries see art. no. 4000 901 810 Product Description: Voltage from 12 V - 1000 V AC/DC (LED) - optical, acoustic continuity test up to 100 kΩ (yellow LED) - phase sequence test (green LED), phase test (red LED) - polarity test (LED) - direct display without pushbutton actuation (high resistance) - load connection via pushbutton (low resistance) - deliberate tripping of the RCD - vibration alarm - measuring point illumination - cable break detector - protection class IP65 (dustproof/jet-proof) - housing with rubberised grip surface - CAT IV 600 V, CAT III 1000 V - (voltage display from 50 V even with empty batteries!) - approved according to DIN EN 61243-3, VDE 0682-401 Technical Data: - Mode of operation: two-pole - Protection class: IP65 - Continuity test: LED/buzzerNote on the disposal of batteries and rechargeable batteries - As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the German Battery Act (BattG) to inform you of the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €88,57

• 

  BENNING Benning voltage/continuity tester PROFIPOL(R)+ ( 4000828814 ) 12-690 V AC/DC CAT III 600V/CAT II 690 V

  Wed, 11/26/2025

  Scope of Delivery: - 1x BENNING voltage/current tester 12-690 V AC/DC - Supplied with batteries (2 x 1.5 V micro batteries, type AAA), for replacement batteries see art. no. 4000 901 810 Product Description: Voltage from 12 V - 690 V AC/DC (LED) - Display levels: 12, 24, 50, 120, 230, 400, 690 V AC/ DC, are fully functional with empty or removed batteries - audible and visual continuity test up to 100 kΩ (buzzer/ yellow Ω-LED) - single-pole phase conductor test (phase) (red LED) - polarity test (+/- LEDs) - non-contact phase tester/ cable break detector (yellow LED) - test handle lock for one-handed operation on sockets and for safe storage - reduced test current without RCD/RCD tripping: Is CAT III 600 V, CAT II 690 V Technical Data: - Mode of operation: two-pole - Protection class: IP54 - Continuity test: LED/buzzer - Nominal voltage range: 12-690 V AC/DC - Brand: BENNING - Measurement category: CAT III 600V/CAT II 690 V - Model: 020023Note on the disposal of batteries and rechargeable batteries As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the Battery Act (BattG) to draw your attention to the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €62,32

• 

  BENNING BENNING voltage detector DUSPOL(R) analogue 12 - 1000 V AC/DC ( 4000828822 )

  Wed, 11/26/2025

  Scope of Delivery: - Voltage tester DUSPOL® analogue 12 - 1000 V AC/DC Product Description: Voltage test from 12 - 1000 V AC/DC (LED/immersion coil) - phase sequence/phase test (LCD) - polarity test (LED) - direct display without push-button actuation (high resistance) - load connection via push-button (low resistance) - conscious tripping of the RCD - vibration alarm - housing with rubberised grip surface - CAT IV 600 V, CAT III 1000 V - approved to DIN EN 61243-3, VDE 0682-401 Technical Data: - Protection class: IP65For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €77,22

• 

  BENNING BENNING VT 1 voltage tester 200 - 1000 V AC ( 4000828946 )

  Wed, 11/26/2025

  Scope of Delivery: - Voltage tester VT 1 200 - 1000 V AC - Supplied incl. batteries (2 x type AAA) and pin clip, for replacement batteries see art. no. 4000 901 810 Product Description: Phase and cable breakage tester Non-contact, fast phase testing in AC networks - Phase testing on sockets, junction boxes, switches, cables and lamps, etc. - Testing insulated cables (cable reels, fairy lights) for cable breakage - Indication via red LED test probe and acoustic signal - Flashing frequency increases with voltage level - Overvoltage category CAT IV 600 V, CAT III 1000 V - Impact-resistant and break-proof ABS housing Technical Data: - Protection class: IP 40 - Requires testing: yesNote on the disposal of batteries and rechargeable batteries - As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the German Battery Act (BattG) to inform you of the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €42,86

• 

  BENNING BENNING SDT 1 socket outlet tester for testing socket outlets with earthing contact ( 4000828811 )

  Wed, 11/26/2025

  Scope of Delivery: - SDT 1 socket outlet tester for testing earthed socket outlets Product Description: Quick and easy testing of earthed sockets for correct connection - Wiring faults, such as missing PE, N and L conductors and reversed L and PE conductors are clearly indicated via 3 LEDs - Active PE test with touch electrode and LC display warns of the presence of a dangerous touch voltage (> 50 V) at the protective conductor connection (PE) - Test button for tripping 30 mA RCD circuit breaker - Clear indication via LEDs and LC display - Easy-to-understand status table provides information on the correct connection (OK, green) and the type of fault present (red) of the socket outlet with earthing contact - Measuring category CAT III 300 V Technical Data: - Display: LCD/LEDsFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €65,43

• 

  BENNING Benning current clamp multimeter CM 1-2 ( 4000828957 ) 0.1 - 400 A

  Wed, 11/26/2025

  Scope of Delivery: - 1x BENNING current clamp multimeter 0.1 - 400 A - Delivery incl. bag, test leads, batteries (2 x type AAA), spare batteries see art. 4000 901 810 Product Description: 3 ½-digit digital LCD display (2000 dots) - Manual measuring range selection - Automatic switch-off - Automatic battery undervoltage display - Instantaneous value memory Hold - Measuring circuit category Cat III 600 V Measuring ranges: AC current 0.1 A - 400 A, AC voltage 0.1 V - 600 V, DC voltage 0.1 V - 600 V, resistance 0.1 Ω - 20 MΩ, continuity test 20 Ω Technical Data: - Width: 70cm - Length: 190cm - Tong opening: 30mm - Height: 38cm - Measuring method: RMS - Measurement category: CAT III 600 V - Measuring range: 0.1 - 400 A - Brand: BENNINGNote on the disposal of batteries and accumulators Since we sell batteries and accumulators or devices containing batteries and accumulators, we are obliged under the Battery Act (BattG) to draw your attention to the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €133,57

• 

  BENNING BENNING current clamp multimeter CM 1-4 0.1 A-200 A AC ( 4000828948 )

  Wed, 11/26/2025

  Scope of Delivery: - Current clamp multimeter CM 1-4 0.1 A-200 A AC - Supplied with belt holster, test leads, rubberised contact tip protection, push-on caps (CAT III/IV), contact tip enlargement (Ø 4 mm), batteries (2 x type AAA), replacement batteries see art. no. 4000 901 810 Product Description: 4-part illuminated LCD display (9,999 dots) - with open current clamp, LED step display, phase and rotary field test - rotary field direction test via green LEDs (right/left) - voltage display from 50 V functional with empty batteries - deactivatable signal tone for voltage measurement - one-hand operation for voltage measurement on sockets (19 mm) - automatic range selection - measured value memory (HOLD) - self-test device (self-test) - LED measuring point illumination - measuring category CAT IV 600 V, CAT III 1000 V Measuring ranges: Alternating current (100 mA - 200 A), voltage (6.0 V - 1000 V), resistance (1 Ω - 50 kΩ), rotary field direction display, continuity test, single-pole phase conductor test (phase), polarity test Technical Data: - Width: 57mm - Length: 220mm - Pliers opening: 16mm - Height: 35mm - subject to testing: yesNote on the disposal of batteries and rechargeable batteries - As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the Battery Act (BattG) to draw your attention to the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €309,39

• 

  BENNING Benning current clamp multimeter CM 10-1 ( 4000828955 ) 0.01 - 1500 A

  Wed, 11/26/2025

  Scope of Delivery: - 1x BENNING current clamp multimeter 0.01 - 1500 A - Delivery incl. bag, test leads, batteries (2 x type AA) Spare battery see art. 4000 901 811 Product Description: illuminated 4-digit digital LCD display (6000 dots) - for professional use in industry, service and trade - continuity test - diode test - data logger and memory function (4000 measured values) - Bluetooth® Low Energy 4.0 interface for measured value transmission - free IOS and Android app BENNING MM-CM Link for downloading, saving and sharing measured values via smartphone/tablet. AutoV function with low input impedance (LoZ) for suppressing reactive voltages - Inrush current measurement (INRUSH) - Low-pass filter (HFR high-frequency suppression, 800 Hz) for measurements on switched motor drives - Measurement input for flexible current transformer BENNING CFlex 1 to 3000 A AC (optional accessory) - Voltage sensor for non-contact phase and cable break testing (red LED) - Measuring range selection, Switch-off, battery undervoltage display automatic - Instantaneous value memory Hold - Minimum/maximum value memory MIN/MAX - LED measuring point illumination - Measuring circuit category Cat IV 600 V, Cat III 1000 V Measuring ranges: AC voltage (0.1 V - 1000 V), DC voltage (0.1 mV - 1000 V), AC/DC current 0.01 A - 1500 A, resistance 0.1 Ω - 600 kΩ, frequency 0.01 Hz - 10 kHz, capacitance 0.1 μF - 1 mF Technical Data: - Width: 86mm - Length: 254mm - Pliers opening: 42mm - Height: 48mm - Measuring method: TRUE RMS - Measurement category: CAT IV 600 V, CAT III 100 V - Measuring range: 0.01 - 1500 A - Brand: BENNINGNote on the disposal of batteries and rechargeable batteries As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the Battery Act (BattG) to draw your attention to the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €465,25

Show more products