Alle Artikel mit Online Bestpreisen!

In dieser Kategorie findest Du alle Werkzeuge und Artikel für die wir zum Zeitpunkt des letzten Updates den Online Bestpreis innehatten! Um Dir die besten Preise anbieten zu können, vergleichen wir regelmäßig unsere Preise mit den Angeboten auf dem Preisvergleichsportal. Weitere Informationen zum Vergleich findest Du auf den Produktdetailseiten.

Übrigens findest Du viele Bestpreis-Artikel nur hier bei uns, da wir nicht alle Angebote zu Preisvergleichsportalen übermitteln - reinschauen lohnt sich!

Read more less

Show previous products

• 

  metabo Metabo basic set 1x Li-Power battery pack 18 V 2.0 Ah battery ( 625596000 ) + SC 36 charger

  Fri, 11/14/2025

  Scope of Delivery: - 1x Metabo SC 36 charger - 1x Metabo Li-Power battery pack 18 V 2.0 Ah Product Description: With the SC 36, Metabo offers a charger that is suitable for charging all Li-ion and LiHD batteries in the 12 V and 18 V range from Metabo. Thanks to its maximum charging current of 3.0 A, the batteries are quickly recharged and ready for use again. The particular advantage of this charger is its suitability for charging all battery packs from CAS (Cordless Alliance System) partners such as: Rothenberger, Edding, Fischer, Mafell, Collomix, Eibenstock, Eisenblättert, Haaga, Starmix, Steine, Rokamat, Birchmeier. One charger for everything. The Metabo battery offers you perfect compatibility with all 18 V machines and chargers from CAS partners. Thanks to Ultra-M technology and the patented "AIR COOLED" charging technology, you benefit from intelligent battery management and a long service life. In addition, processor-controlled single cell monitoring (ESCP) ensures particular safety during charging and discharging. The capacity indicator allows you to check the charge level of the battery at any time and thanks to the long shelf life with virtually no self-discharge, you can use the battery for longer periods of time. The Metabo rechargeable battery is the perfect choice for all ambitious DIY enthusiasts and professionals. Technical Data: - Manufacturer: Metabo - Manufacturer's description: Basic Set - SC 36: - Battery voltage: 12 - 18 V - Mains voltage: 220 - 240 V - Mains frequency: 50 - 60 Hz - Max. Charging current: 3.0 A - Li-Power battery pack 18 V 2.0 Ah: - Manufacturer number: 625596000 - Voltage: 18 V - Battery capacity: 2.0 Ah - Cell technology: Li-Ion - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €76,55

• 

  Ryobi RYOBI RY18SCA cordless secateurs 18 V 25 mm + 2x battery 5.0 Ah + charger

  Fri, 11/14/2025

  Scope of Delivery: - 1x RYOBI RY18SCA cordless secateurs 18 V - 2x RYOBI RB18L50 18 V 5.0 Ah / 5000 mAh Li-Ion battery - 1x RYOBI RC18120 battery fast charger Product Description: The RYOBI RY18SCA cordless secateurs make cutting branches and twigs child's play. With their lightweight design and the ability to work with one hand, they are particularly comfortable to use. The Japanese SK5 steel blades are particularly sharp and enable clean and precise cuts that promote the healthy growth of your plants. Thanks to the high cutting performance, branches up to 25 mm thick can be cut through with ease. The cuts require hardly any effort from the user and are completed in just 2.5 seconds, allowing you to work quickly and efficiently. Up to 1500 cuts can be made with a fully charged 18 V 1.5 Ah battery. Technical Data: - Manufacturer: RYOBI - Manufacturer designation: RY18SCA - Voltage: 18V - Weight [without battery] [kg]: 0.74 - Weight with battery (EPTA) [kg]: 1.17 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €320,09

• 

  DEWALT DeWalt DCF 922 N cordless impact wrench 18 V 406 Nm 1/2" brushless + 1x rechargeable battery 2.0 Ah - without charger

  Fri, 11/14/2025

  Scope of Delivery: - 1x DeWalt DCF 922 N cordless impact wrench - 1x DeWalt DCB 183 18 V 2.0 Ah rechargeable battery - 1x belt hook Product Description: The DeWalt DCF 922 N cordless impact wrench is a powerful 4-stage impact wrench of the latest generation, which impresses with its low weight and extremely compact dimensions. Thanks to the innovative brushless motor technology, it offers a longer runtime per battery charge and a longer service life. The speed, impact speed and torque can be electronically regulated in two stages using the finely adjustable throttle switch, which enables maximum control for all applications. The impact wrench also has two electronic control levels for safe use in special situations. Control level 1 stops clockwise rotation as soon as the screw comes into contact with the material and regulates the rotation and impact speed to prevent unintentional over-tightening of the screw or damage to the material. Control stage 2 prevents unintentional over-tightening of the screw in clockwise rotation by interrupting the screwdriving process for 1.5 seconds and stops the screwdriving process in anti-clockwise rotation as soon as the screw can be safely removed by hand. All four stages can be set quickly and safely electronically via a switch. With a high tightening torque of over 400 Nm and a loosening torque of over 600 Nm, the DCF 922 N is ideal for the toughest screwdriving jobs. The safety electronics ensure problem-free long-term use by permanently monitoring the battery temperature, current drain and discharge protection. The high-quality and robust aluminium impact mechanism housing enables optimum heat exchange and therefore increases the service life of the device. The robust ½" external square drive with ball detent ensures a very secure fit for the insert tools. Thanks to the extremely compact and lightweight design and the ergonomic rubberised grip areas, the impact wrench can also be used in very confined spaces without any problems. A diode ring with three powerful LEDs with individually adjustable light intensity ensures optimum visibility at the workplace. The robust metal belt hook also makes it easy to use. The DeWalt DCF 922 N is compatible with all 18 V XR or XR Flexvolt batteries (not included) and therefore offers maximum flexibility and performance for demanding screwdriving jobs. Technical Data: - Manufacturer: DeWalt - Manufacturer's designation: DCF 922 N - Idle speed (RPM): 0 - 2500 - Impact rate per min.: 0 - 3550 - Product weight: 1.1 kg - Max. Torque: 406 Nm - Product length: 126 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €191,57

• 

  Metabo Metabo KH 18 LTX BL 28 Q cordless hammer drill 18 V 3 J SDS plus Brushless + 1x rechargeable battery 10.0 Ah + metaBOX - without charger

  Fri, 11/14/2025

  Scope of Delivery: - 1x Metabo KH 18 LTX BL 28 Q cordless hammer - 1x hammer chuck for tools with SDS-plus insertion end - 1x quick-action drill chuck for tools with cylindrical shank - 1x rubberised additional handle - 1x Drilling depth stop - 1x Metabo LiHD battery pack 18 V 10.0 Ah ( 625549000 ) CAS system - 1x Metabo metaBOX - without charger Product Description: With the KH 18 LTX BL 28 Q, Metabo offers a cordless rotary hammer for the highest demands. The Metabo VibraTech ( MVT ) reduces vibration, which enables longer, less tiring work and the Vario-Tacho-Constamatic ( VTC ) allows the speed to be adjusted to suit the material. The electronic soft start enables precise drilling. The mechanical decoupling and fast sensor-controlled switch-off reduce the risk of injury from the machine becoming wedged ( kick-back ). Thanks to the integrated LED light, you always have an optimum view of the workpiece to be treated. Metabo is a leading manufacturer of power tools of all kinds, characterised above all by its high quality of workmanship and its membership of the CAS Group, which enables it to draw on a wide range of compatible devices and batteries from other manufacturers. Technical Data: - Manufacturer: Metabo - Manufacturer designation: KH 18 LTX BL 28 Q - Battery voltage: 18 V - Max. Single impact energy (EPTA): 3 J - Max. Impact speed: 4470 /min - Drilling Ø concrete with hammer drill bits: 28 mm - Drilling Ø masonry with drill bits: 82 mm - Drilling Ø steel: 13 mm - Drilling Ø softwood: 30 mm - Idle speed: 0 - 1000 /min - Tool holder: SDS-plus - Weight without battery pack: 3.4 kg - Hammer drilling concrete: 18.2 m/s² - Measurement uncertainty K: 1.5 m/s² - Chiselling: 13.4 m/s² - Measurement uncertainty K: 1.5 m/s² - Sound pressure level: 92 dB(A) - Sound power level (LwA): 103 dB(A) - Measurement uncertainty K: 3 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €482,37

• 

  Makita Makita DMP 181 RG cordless compressor 18 V 11.1 bar + 2x rechargeable battery 6.0 Ah + charger

  Fri, 11/14/2025

  Scope of Delivery: - 1x Makita DMP 181 Z cordless compressor - 1x air mattress adapter ( TE00000333 ) - 1x French valve adapter ( TE00000334 ) - 1x ball pump adapter (TE00000335) - 1x valve adapter, lightning valve (TE00000346) - 2x Makita BL 1860 B 18 V 6.0 Ah battery ( 197422-4 ) - 1x Makita DC 18 RC battery quick charger 7.2 V - 18 V ( 195584-2 ) Product Description: The Makita DMP 181 Z cordless compressor is the perfect companion when it comes to precise and effective inflation of tyres, balls and the like. With a maximum pressure of up to 11.1 bar and three stages, it is suitable for all types of work. The built-in LED light ensures good illumination of the surroundings in poor lighting conditions. The 18 volt cordless compressor also has a 65 cm hose and various valves. The digital display is easy to read from all angles. In addition, the DMP 181 remembers the pressure setting from the last use. Another decisive factor is the low weight of just 2.1 kg, which means it can be used anywhere. Makita is a leading manufacturer of power tools, which is characterised above all by high quality workmanship and a long tradition. Technical Data: - Manufacturer: Makita - Manufacturer designation: DMP 181 - Battery voltage: 18 V - Battery system: LXT - Battery protection system: Yes - Air flow rate: 22 L/min - Maximum pressure: 11.1 bar - Hose length: 0.65 m - Product weight: 2.1 kg - Weight incl. battery (EPTA): 2.5 - 2.8 kg - Product dimensions (L x W x H): 316 - 272 x 108 x 231 mm - Sound pressure level (LpA): 70 dB(A) - K-value noise: 3 dB(A) - Vibration: 3.6 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €329,83

• 

  Shogun Shogun RYOBA Japanese saw universal wood pull saw long handle ( M-180R ) blade 180 mm - Made in Japan

  Fri, 11/14/2025

  Scope of Delivery: - 1x Shogun RYOBA Japanese saw universal wood pull saw long handle ( M-180R ) Product Description: The Shogun RYOBA universal saw has a blade length of 180 mm and an overall length of 390 mm. This makes it easy to saw branches in trees quickly and precisely, for example. Sawing plywood and green wood is also no problem. With the special double-deep toothing and the tooth spacing of 1.5 mm, the workpiece can be removed quickly and cleanly without any problems. Thanks to the two cutting edges with different saw teeth, all sawing jobs are covered. The saw's locking screw ensures that the saw blade is held securely in place. The impulse-hardened saw blade is particularly resistant and lasts up to three times longer than conventional steel. The replaceable blade confirms the well thought-out concept of Shogun, so when it is worn out you only have to replace it instead of buying a new saw. A long tradition of saws is associated with the country of manufacture, Japan, and the quality confirms this. Technical Data: - Blade length: 180 mm - Blade thickness: 0.5 mm - Steel: Special steel ( impulse hardened ) - kerf: 0.9 mm - Serration: 1.5 mm / 2.14 mm - Area of application: Wood, green wood, plywood - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €29,08

• 

  Makita Makita DHP 492 G1J cordless impact drill 18 V 141 Nm brushless + 1x rechargeable battery 6.0 Ah + Makpac - without charger

  Fri, 11/14/2025

  Scope of Delivery: - 1x Makita DHP 492 cordless impact drill driver - 1x depth stop ( 122576-8 ) - 1x side handle with extension ( 122F12-0 ) - 1x Makita BL 1860 B 18 V 6.0 Ah rechargeable battery - 1x Makita MAKPAC system case - 1x universal insert - without charger Product Description: The Makita DHP 492 cordless impact drill driver is a powerful and compact machine for professional use. Equipped with 18 volts and a brushless motor, it impresses with its high efficiency and durability. The switchable impact mechanism enables flexible working depending on the application. With a maximum torque of 141 Nm - as well as 130 Nm for hard and 65 Nm for soft screwdriving - it offers sufficient power reserves for demanding tasks. The torque can be precisely adjusted in 21 stages plus a drilling stage. The features include a robust metal quick-action drill chuck, a side handle for better control and a bright double LED with pre-glow and afterglow function for optimum visibility even in dark working areas. The integrated deep discharge protection switches the tool off automatically when the battery is almost empty, while the electronic overload protection provides additional safety. An electronic brake ensures maximum efficiency and user protection. Thanks to the compact and lightweight design, fatigue-free working is supported even during long periods of use. Technical Data: - Manufacturer : Makita - Manufacturer designation : DHP 492 - Battery voltage: 18 V - Battery type: Li-ion - Idle speed: 0 - 550 / 2100 min-¹ - Torque hard/soft: 130 / 65 Nm - Locking torque: 141 Nm - Torque settings: 21 - (Idle) impact speed: 0 - 8250 / 31500 min-¹ - Drilling capacity in masonry: 16 mm - Drilling capacity in steel: 13 mm - Drilling capacity in wood (auger drill): 50 mm - Drilling capacity in wood (Forstner bit): 76 mm - Drilling capacity with flat milling drills: 40 mm - Drilling capacity with hole saws:: 152 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Motor brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value), drilling in metal: 1.5 m/s² - Vibration values, impact drilling in concrete: 8.6 m/s² - Vibration uncertainty factor (K value), impact drilling in concrete: 1.5 m/s² - Sound power level (LWA): 95 dB(A) - Sound pressure level (LpA): 87 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 180 x 81 x 265 mm - Weight incl. battery: 2.3 - 2.7 kg - Product weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €362,34

• 

  DEWALT DeWalt DWS 5022 Guide rail for manual and plunge-cut circular saws with 150 cm length

  Fri, 11/14/2025

  Scope of Delivery: - DeWalt DWS 5022 - XJ guide rail for hand-held and plunge-cut circular saws with a length of 150 cm Product Description: The DWS 5022 - XJ is a 150 cm long guide rail for circular hand saws and plunge-cut saws from DeWalt. The lightweight aluminium construction is the reason for the low weight of 2.5 kg. The guide rail is compatible with the following DeWalt models: D 23551 / DWE 576 K / DWS 520 K . Technical Data: - Length: 150 cm - Material: Aluminium - Weight: 2.5 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €124,32

• 

  Makita Makita DHP 492 RG1 cordless impact drill 18 V 141 Nm brushless + 1x rechargeable battery 6,0 Ah + charger

  Fri, 11/14/2025

  Scope of Delivery: - 1x Makita DHP 492 cordless impact drill - 1x depth stop ( 122576-8 ) - 1x side handle with extension ( 122F12-0 ) - 1x Makita BL 1860 B 18 V 6.0 Ah rechargeable battery - 1x Makita DC 18 RC battery fast charger Product Description: The Makita DHP 492 cordless impact drill driver is a powerful and compact machine for professional use. Equipped with 18 volts and a brushless motor, it impresses with its high efficiency and durability. The switchable impact mechanism enables flexible working depending on the application. With a maximum torque of 141 Nm - as well as 130 Nm for hard and 65 Nm for soft screwdriving - it offers sufficient power reserves for demanding tasks. The torque can be precisely adjusted in 21 stages plus a drilling stage. The features include a robust metal quick-action drill chuck, a side handle for better control and a bright double LED with pre-glow and afterglow function for optimum visibility even in dark working areas. The integrated deep discharge protection switches the tool off automatically when the battery is almost empty, while the electronic overload protection provides additional safety. An electronic brake ensures maximum efficiency and user protection. Thanks to the compact and lightweight design, fatigue-free working is supported even during long periods of use. Technical Data: - Manufacturer : Makita - Manufacturer designation : DHP 492 - Battery voltage: 18 V - Battery type: Li-ion - Idle speed: 0 - 550 / 2100 min-¹ - Torque hard/soft: 130 / 65 Nm - Locking torque: 141 Nm - Torque settings: 21 - (Idle) impact speed: 0 - 8250 / 31500 min-¹ - Drilling capacity in masonry: 16 mm - Drilling capacity in steel: 13 mm - Drilling capacity in wood (auger drill): 50 mm - Drilling capacity in wood (Forstner bit): 76 mm - Drilling capacity with flat milling drills: 40 mm - Drilling capacity with hole saws:: 152 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Motor brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value), drilling in metal: 1.5 m/s² - Vibration values, impact drilling in concrete: 8.6 m/s² - Vibration uncertainty factor (K value), impact drilling in concrete: 1.5 m/s² - Sound power level (LWA): 95 dB(A) - Sound pressure level (LpA): 87 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 180 x 81 x 265 mm - Weight incl. battery: 2.3 - 2.7 kg - Product weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €371,17

• 

  Makita Makita DHP 492 RM1 cordless impact drill 18 V 141 Nm brushless + 1x battery 4,0 Ah + charger

  Fri, 11/14/2025

  Scope of Delivery: - 1x Makita DHP 492 cordless impact drill - 1x depth stop ( 122576-8 ) - 1x side handle with extension ( 122F12-0 ) - 1x Makita BL 1840 B 18 V 4.0 Ah rechargeable battery - 1x Makita DC 18 RC battery quick charger Product Description: The Makita DHP 492 cordless impact drill driver is a powerful and compact machine for professional use. Equipped with 18 volts and a brushless motor, it impresses with its high efficiency and durability. The switchable impact mechanism enables flexible working depending on the application. With a maximum torque of 141 Nm - as well as 130 Nm for hard and 65 Nm for soft screwdriving - it offers sufficient power reserves for demanding tasks. The torque can be precisely adjusted in 21 stages plus a drilling stage. The features include a robust metal quick-action drill chuck, a side handle for better control and a bright double LED with pre-glow and afterglow function for optimum visibility even in dark working areas. The integrated deep discharge protection switches the tool off automatically when the battery is almost empty, while the electronic overload protection provides additional safety. An electronic brake ensures maximum efficiency and user protection. Thanks to the compact and lightweight design, fatigue-free working is supported even during long periods of use. Technical Data: - Manufacturer : Makita - Manufacturer designation : DHP 492 - Battery voltage: 18 V - Battery type: Li-ion - Idle speed: 0 - 550 / 2100 min-¹ - Torque hard/soft: 130 / 65 Nm - Locking torque: 141 Nm - Torque settings: 21 - (Idle) impact speed: 0 - 8250 / 31500 min-¹ - Drilling capacity in masonry: 16 mm - Drilling capacity in steel: 13 mm - Drilling capacity in wood (auger drill): 50 mm - Drilling capacity in wood (Forstner bit): 76 mm - Drilling capacity with flat milling drills: 40 mm - Drilling capacity with hole saws:: 152 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Motor brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value), drilling in metal: 1.5 m/s² - Vibration values, impact drilling in concrete: 8.6 m/s² - Vibration uncertainty factor (K value), impact drilling in concrete: 1.5 m/s² - Sound power level (LWA): 95 dB(A) - Sound pressure level (LpA): 87 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 180 x 81 x 265 mm - Weight incl. battery: 2.3 - 2.7 kg - Product weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €330,69

• 

  Makita Makita DHP 492 M1J cordless impact drill 18 V 141 Nm brushless + 1x rechargeable battery 4.0 Ah + Makpac - without charger

  Fri, 11/14/2025

  Scope of Delivery: - 1x Makita DHP 492 cordless impact drill driver - 1x depth stop ( 122576-8 ) - 1x side handle with extension ( 122F12-0 ) - 1x Makita BL 1840 B 18 V 4.0 Ah rechargeable battery - 1x Makita MAKPAC system case - 1x universal insert - without charger Product Description: The Makita DHP 492 cordless impact drill driver is a powerful and compact machine for professional use. Equipped with 18 volts and a brushless motor, it impresses with its high efficiency and durability. The switchable impact mechanism enables flexible working depending on the application. With a maximum torque of 141 Nm - as well as 130 Nm for hard and 65 Nm for soft screwdriving - it offers sufficient power reserves for demanding tasks. The torque can be precisely adjusted in 21 stages plus a drilling stage. The features include a robust metal quick-action drill chuck, a side handle for better control and a bright double LED with pre-glow and afterglow function for optimum visibility even in dark working areas. The integrated deep discharge protection switches the tool off automatically when the battery is almost empty, while the electronic overload protection provides additional safety. An electronic brake ensures maximum efficiency and user protection. Thanks to the compact and lightweight design, fatigue-free working is supported even during long periods of use. Technical Data: - Manufacturer : Makita - Manufacturer designation : DHP 492 - Battery voltage: 18 V - Battery type: Li-ion - Idle speed: 0 - 550 / 2100 min-¹ - Torque hard/soft: 130 / 65 Nm - Locking torque: 141 Nm - Torque settings: 21 - (Idle) impact speed: 0 - 8250 / 31500 min-¹ - Drilling capacity in masonry: 16 mm - Drilling capacity in steel: 13 mm - Drilling capacity in wood (auger drill): 50 mm - Drilling capacity in wood (Forstner bit): 76 mm - Drilling capacity with flat milling drills: 40 mm - Drilling capacity with hole saws:: 152 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Motor brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value), drilling in metal: 1.5 m/s² - Vibration values, impact drilling in concrete: 8.6 m/s² - Vibration uncertainty factor (K value), impact drilling in concrete: 1.5 m/s² - Sound power level (LWA): 95 dB(A) - Sound pressure level (LpA): 87 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 180 x 81 x 265 mm - Weight incl. battery: 2.3 - 2.7 kg - Product weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €328,60

• 

  Makita Makita DHP 492 RGJ cordless impact drill 18 V 141 Nm brushless + 2x rechargeable battery 6.0 Ah + charger + Makpac

  Fri, 11/14/2025

  Scope of Delivery: - 1x Makita DHP 492 cordless impact drill - 1x depth stop ( 122576-8 ) - 1x side handle with extension ( 122F12-0 ) - 2x Makita BL 1860 B 18 V 6.0 Ah rechargeable battery - 1x Makita DC 18 RC battery quick charger - 1x Makita MAKPAC system case - 1x universal insert Product Description: The Makita DHP 492 cordless impact drill driver is a powerful and compact machine for professional use. Equipped with 18 volts and a brushless motor, it impresses with its high efficiency and durability. The switchable impact mechanism enables flexible working depending on the application. With a maximum torque of 141 Nm - as well as 130 Nm for hard and 65 Nm for soft screwdriving - it offers sufficient power reserves for demanding tasks. The torque can be precisely adjusted in 21 stages plus a drilling stage. The features include a robust metal quick-action drill chuck, a side handle for better control and a bright double LED with pre-glow and afterglow function for optimum visibility even in dark working areas. The integrated deep discharge protection switches the tool off automatically when the battery is almost empty, while the electronic overload protection provides additional safety. An electronic brake ensures maximum efficiency and user protection. Thanks to the compact and lightweight design, fatigue-free working is supported even during long periods of use. Technical Data: - Manufacturer : Makita - Manufacturer designation : DHP 492 - Battery voltage: 18 V - Battery type: Li-ion - Idle speed: 0 - 550 / 2100 min-¹ - Torque hard/soft: 130 / 65 Nm - Locking torque: 141 Nm - Torque settings: 21 - (Idle) impact speed: 0 - 8250 / 31500 min-¹ - Drilling capacity in masonry: 16 mm - Drilling capacity in steel: 13 mm - Drilling capacity in wood (auger drill): 50 mm - Drilling capacity in wood (Forstner bit): 76 mm - Drilling capacity with flat milling drills: 40 mm - Drilling capacity with hole saws:: 152 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Motor brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value), drilling in metal: 1.5 m/s² - Vibration values, impact drilling in concrete: 8.6 m/s² - Vibration uncertainty factor (K value), impact drilling in concrete: 1.5 m/s² - Sound power level (LWA): 95 dB(A) - Sound pressure level (LpA): 87 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 180 x 81 x 265 mm - Weight incl. battery: 2.3 - 2.7 kg - Product weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €496,76

Show more products