All Tools
-
STAHLWILLE STAHLWILLE strap spanner 12005 Clamping range Ø 200 mm ( 4000826490 )
Fri, 10/31/2025
Scope of Delivery: - Strap spanner 12005 Clamping range Ø 200 mm Product Description: with strong, non-slip rubber fabric strap Technical Data: - nanFor commercial use, please observe the building regulations!
€38,04
-
Mey Chair Systems GmbH Swivel stool ( 9146454561 ) with castors Seat height adjustment 470-600 mm
Fri, 10/31/2025
Scope of Delivery: - 1x swivel stool with castors Product Description: affordable castor stool for many work areas - seat Ø 340 mm - optionally with beech plywood, natural colour lacquered or breathable fabric cover - infinitely variable gas spring height adjustment - sturdy plastic five-star base with load-dependent braked safety double castors for hard and soft floors Technical Data: - Frame design: with castors - Seat: fabric upholstery - Seat height adjustment: 470-600 mm - Colour: black - Seat Ø: 340 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€98,80
-
KLINGSPOR KLINGSPOR abrasive belt CS 411 Y length 2000 mm width 75 mm grit 60 ( 4000845819 )
Fri, 10/31/2025
Scope of Delivery: - Sanding belt CS 411 Y Length 2000 mm Width 75 mm Grit 60 Product Description: Zirconium aluminium oxide - waterproof - resin-bonded Y-fabric - densely coated - particularly tear-resistant high-performance abrasive belt with high removal rate for coarse sanding and deburring of steel and stainless steel Technical Data: - Colour: blueFor commercial use, please observe the building regulations!
€84,81
-
NORRES NORRES AIRDUC(R) PVC 345 suction and delivery hose inner Ø 50-51 mm ( 4501400312 )
Fri, 10/31/2025
Scope of Delivery: - AIRDUC® PVC 345 suction and delivery hose Inner Ø 50-51 mm Product Description: Applications: flexible hose for gases and for dusts, powders, fibres, extraction system, dust extraction system, filter system, oil mist extraction, electroplating extraction Features: heavy-duty design, increased pressure and vacuum resistance, good alkali and acid resistance, good chemical resistance, phthalate-free, RoHS compliant, flame-retardant to: UL94-HB Construction: 1. spring steel wire firmly moulded into the wall, 2. wall: high-quality soft PVC, 3. wall thickness approx. 1.4 - 1.5 mm RoHS compliant, REACH according to --> Technology / Technical Information / REACH Temperature range: -20 °C to +70 °C, briefly up to +80 °C Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Bending radius: 35.00mm - Physical state: GaseousFor commercial use, please observe the building regulations!
€251,47
-
helit innovative Büroprodukte GmbH Waste bin ( 9000468438 ) 13 l H300xØ245 mm flame retardant silver
Fri, 10/31/2025
Scope of Delivery: - 1x ZWINGO waste bin 13 l H300xØ245 mm flame retardant Product Description: 13 l - flame-retardant plastic - with aluminium insert Technical Data: - Capacity: 13 litres - Colour: silver - Width: 245 mm - Design: flame retardant - Material: plastic - Ø: 245 mm - Height: 300 mm - Brand: ZWINGO For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€44,61
-
LESSMANN LESSMANN pipe brush length 115 mm Ø 14 mm ( 4000840812 )
Fri, 10/31/2025
Scope of Delivery: - Pipe brush Length 115 mm Ø 14 mm Product Description: crimped wire - for deburring and cleaning pipes and drill holes - for cleaning gratings and sleeves - compatible with shaft and handle - with M6 thread Technical Data: - nanFor commercial use, please observe the building regulations!
€15,93
-
GEKA GEKA hose reel plus P25 connection thread 20.95 mm G 1/2 ″ ( 4000351034 )
Fri, 10/31/2025
Scope of Delivery: - Hose reel plus P25 connection thread 20.95 mm G 1/2 ″ Product Description: Robust, powder-coated steel construction - Suitable for drinking water, the water-bearing components comply with the Drinking Water Ordinance - Curved inlet pipe prevents the hose from kinking - Practical appliance holder - Temperature range: +4 °C to +60 °C - Pre-assembled without hose, spare parts available on request Technical Data: - Weight: 7kgFor commercial use, please observe the building regulations!
€172,03
-
MULTICOLL Multicoll route warning tape ( 4000818344 ) imprint Attention D. Telekom cable
Fri, 10/31/2025
Scope of Delivery: - 1x MULTICOLL route warning tape imprint Attention D. Telekom cable Product Description: Composite film made of environmentally friendly PE with black print - 250 m on the roll Technical Data: - Material: Polyethylene - Imprint: Attention D. Telecom cable - Colour: yellow - Width: 50 mm - Length: 250 m - Design: perforated predetermined breaking point according to DIN EN 12613 - Brand: MULTICOLLFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€31,82
-
NORRES NORRES suction and blower hose CP Kapton(R) 476 150-152 mm 162.00 mm ( 4501403819 )
Fri, 10/31/2025
Scope of Delivery: - Suction and blower hose CP Kapton® 476 150-152 mm 162.00 mm Product Description: High-temperature hose, clamping profile hose, (up to +400°C) Applications: - Flexible hose for hot and cold gases - Exhaust gas extraction, extraction of engine exhaust gases: Exhaust hose reel, suction slot duct, above-floor extraction system, underfloor extraction system - Engine test bench, exhaust gas measurement - Chemical industry: chemical vapours, gas pendulum hose on loading arm, paint vapours, paint mist extraction - Paper mill, paper industry: dirty water, exhaust air - High-temperature extraction: Furnace, foundry, blast furnace, smelter, ceramics industry, glass industry, steelworks, aluminium smelter - bellows, expansion joint Properties: abrasion protection due to external clamping profile - tension-resistant clamping of the wall in the clamping profile - highly flexible + compressible 4:1 - very good heat resistance - good alkali and acid resistance - extremely good chemical resistance - RoHS compliant Temperature range: -60°C to 400°C Technical Data: - Bending radius: 38.00mm - Weight: 0.95kg/m - Physical state: GaseousFor commercial use, please observe the building regulations!
€1.561,11
-
PFERD PFERD mounted point INOX EDGE D40xH20mm 6 mm ( 4143160070 )
Fri, 10/31/2025
Scope of Delivery: - Mounted point INOX EDGE D40xH20mm 6 mm Product Description: Specially designed for edge grinding on stainless steel - suitable for grinding fillet welds, removing burrs and grinding chamfers Technical Data: - nanFor commercial use, please observe the building regulations!
€26,07
-
HOPPE HOPPE lever handle hole part Stockholm 1140 aluminium F1 / natural colour ( 8000350624 )
Fri, 10/31/2025
Scope of Delivery: - Lever handle hole part Stockholm 1140 Aluminium F1 / natural colour Product Description: for interior doors - connection: for HOPPE quick-release pin with HOPPE full pin - collar: for loose bearing - lever handle 132 mm - handle depth 60 mm - square spindle 8 mm Technical Data: - nanFor commercial use, please observe the building regulations!
€14,76
-
HELLER Heller hammer drill Trijet ( 8000656697 ) Ø 10 mm working length 400 mm length 460 mm
Fri, 10/31/2025
Scope of Delivery: - 1x HELLER hammer drill Ø 10 mm working length 400 mm length 460 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, including the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140° - Ø: 10 mm - Working length: 400 mm - Total length: 460 mm - Number of cutting edges: 3 - Holder: SDS-plus - Brand: HELLERPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
€33,88
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"