All Tools

Show previous products

• 

  Makita Makita DHR 241 Z 18 V Li-Ion cordless hammer drill with SDS-Plus chuck solo + Makita D-42444 SDS-Plus drill bit set 17 pcs. in aluminium case - without battery, without charger

  Sun, 12/07/2025

  Scope of Delivery: - 1x Makita DHR 241 18 V Li-ion cordless hammer drill solo - 1x side handle with depth stop - 1x Makita D-42444 SDS-Plus drill bit and chisel set 17 pcs. in aluminium case - without battery, without charger Product Description: The powerful Makita DHR 241 18 V hammer drill is suitable for drilling, hammer drilling and chiselling. The combi hammer also impresses with its slip clutch, motor brake and 40-position chisel adjustment for safe and optimal work in any situation. The tool has externally replaceable carbon brushes and thanks to a new rubber damping design, less vibration is generated. With the SDS-Plus holder, the attachments on the DHR 241 can be picked up quickly, without tools and protected from dust. Technical Data: - Battery voltage: 18 V - Battery technology: Li-Ion - Tool holder: SDS-Plus - max. idle speed: 1,100 rpm - Max. no-load impact rate: 4,000 blows/min - Max. drilling diameter in concrete: 20 mm - max. drill diameter in steel: 13 mm - max. drilling diameter in wood: 26 mm - Impact force: 2 joules - Ø 5 x 110 mm - Ø 5.5 x 110 mm - Ø 6 x 110 mm - Ø 6 x 160 mm - Ø 7 x 160 mm - Ø 8 x 110 mm - Ø 8 x 160 mm - Ø 8 x 210 mm - Ø 10 x 110 mm - Ø 10 x 160 mm - Ø 10 x 210 mm - Ø 14 x 260 mm - Pointed chisel 140 mm - Pointed chisel 250 mm - Flat chisel 140 x 20 mm - Flat chisel 250 x 20 mm - Wide chisel 250 x 40 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €173,43

• 

  Makita Makita BL 1415 G rechargeable battery 14.4 V 1.5 Ah / 1500 mAh Li-Ion G-series ( 198192-8 )

  1 Review

  Sun, 12/07/2025

  Scope of Delivery: - 1x Makita BL1415G 14.4 V 1.5 Ah rechargeable battery ( 198192-8 ) Product Description: The Makita BL1415G battery impresses with its long working time. The battery has a long service life thanks to low self-discharge. ATTENTION: This battery is only compatible with the 14.4 V Volt machines from the Makita G series! It is not compatible with the 14.4 V Volt devices from the LXT series. Makita is a leading manufacturer of power tools, characterised by a long tradition and high quality workmanship. Technical Data: - Manufacturer: Makita - Manufacturer designation: BL1415G - Manufacturer number: 198192-8 - Battery voltage: 14.4 V - Capacity (ampere hours): 1.5 Ah - Capacity (watt hours): 22 Wh - Average charging time: 70 min - Product dimensions (L x W x H): 101 x 74 x 32 mm - Weight: 0.33 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €39,59

• 

  Festool Festool DTSC 400-Basic-ERGO cordless delta sander 18 V 100 x 150 mm ( 577029 ) brushless + 1x rechargeable battery 3.0 Ah + systainer - without charger

  Sun, 12/07/2025

  Scope of Delivery: - 1x Festool DTSC 400 cordless delta sander - 1x StickFix sanding pad SSH-STF DELTA/9 - 1x Longlife dust bag SB-Longlife RTS/DTS/ETS - 1x PROTECTOR protective cover PR DTS-R 100x150 - 1x Festool BP 18 Li 3.0 Ergo I 18 V 3.0 Ah battery - 1x Festool SYS3 M 187 Systainer - without charger Product Description: With the Festool DTSC 400 cordless delta sander, you can work very flexibly and mobile with the power of a corded tool. The delta sander impresses with a powerful and brushless EC-TEC motor and, in combination with the compact, lightweight and ergonomic design, long and fatigue-free working is no problem. The self-suction system in combination with the long-life dust bag made of extra durable polyester fleece enables flexible handling of the machine. The plug it mains adapter can be plugged into the battery compartment for unlimited running time, making it ideal for stationary use and in combination with a Festool mobile dust extractor. The Festool PROTECTOR enables gentle sanding on window surfaces, frames and panels. Technical Data: - Manufacturer: Festool - Manufacturer's description: DTSC 400 - Manufacturer number: 577029 - Rated voltage: 18 V - No-load speed: 6,000 - 10,000 min-1 - Sanding stroke: 2 mm - Sanding pad size: 100 x 150 mm - Dust extraction connection: 27 mm - Weight: 1 kg - Grinding: Total average vibration value ah: 2.50 m/s² - Grinding: Standards series EN: 62841-2-4 - Grinding: Uncertainty (noise) K: 3.00 dB - Grinding: Uncertainty (vibration) K: 2.00 m/s² - Grinding: A-weighted sound pressure level Lp: 68.00 dB(A) - Loops: A-weighted sound power level Lw: 79.00 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €332,29

• 

  Festool Festool DTSC 400-Basic cordless delta sander 18 V 100 x 150 mm brushless + 1x rechargeable battery 3.0 Ah + systainer - without charger

  Sun, 12/07/2025

  Scope of Delivery: - 1x Festool DTSC 400 cordless delta sander - 1x StickFix sanding pad SSH-STF DELTA/9 - 1x Longlife dust bag SB-Longlife RTS/DTS/ETS - 1x PROTECTOR protective cover PR DTS-R 100x150 - 1x Festool BP 18 Li 3.0 Ergo I battery 18 V 3.0 Ah - 1x Festool SYS3 M 187 Systainer - without charger Product Description: With the Festool DTSC 400 cordless delta sander, you can work very flexibly and mobile with the power of a corded tool. The delta sander impresses with a powerful and brushless EC-TEC motor and, in combination with the compact, lightweight and ergonomic design, long and fatigue-free working is no problem. The self-suction system in combination with the long-life dust bag made of extra durable polyester fleece enables flexible handling of the machine. The plug it mains adapter can be plugged into the battery compartment for unlimited running time, making it ideal for stationary use and in combination with a Festool mobile dust extractor. The Festool PROTECTOR enables gentle sanding on window surfaces, frames and panels. Technical Data: - Manufacturer: Festool - Manufacturer's designation: DTSC 400 - Manufacturer number: 577507 - Rated voltage: 18 V - No-load speed: 6,000 - 10,000 min-1 - Sanding stroke: 2 mm - Sanding pad size: 100 x 150 mm - Dust extraction connection: 27 mm - Weight: 1 kg - Grinding: Total average vibration value ah: 2.50 m/s² - Grinding: Standards series EN: 62841-2-4 - Grinding: Uncertainty (noise) K: 3.00 dB - Grinding: Uncertainty (vibration) K: 2.00 m/s² - Grinding: A-weighted sound pressure level Lp: 68.00 dB(A) - Loops: A-weighted sound power level Lw: 79.00 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €375,90

• 

  Prebena Prebena 8XR-CNW90 pneumatic coil nailer in transport case + Prebena CNW25 / 65BKRI coil nails ring shank 7200 pieces

  Sun, 12/07/2025

  Scope of Delivery: - 1x Prebena 8XR-CNW90 pneumatic coil nailer - 1x transport case - 1x Prebena CNW25 / 65BKRI coil nails ring shank 7200 pieces Product Description: This practical coil nailer from Prebena has single and contact release. The tool also has a release safety device, depth adjustment, adjustable exhaust air and a silencer. It is supplied in a practical transport case. It is suitable for wooden fences, garden sheds, terraces, carports, footbridges, wooden gates, small animal enclosures, formwork, roof battens and much more. Technical Data: - Pneumatic nailer 8XR-CNW90: - Weight: 4.1 kg - Working pressure: approx. 4 - 8 bar - Air consumption: approx. 2.7 l/nailing - LxWxH: 390 x 145 x 370 mm - CNW25/65BKRI: - Length: 65 mm - Wire size: 2.5 mm - Design: blank, ring shank, wire magazine - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €350,35

• 

  KS Tools KS TOOLS Radnabenschleifer-Satz, Ø 65 / 105 mm, 2-tlg ( 100.4035 )

  Sun, 12/07/2025

  Produktbeschreibung:Radnabenschleifer-Satz, Ø 65 / 105 mm, 2-tlg · Radnabenschleifer-Satz Ø 65 / 105 mmMerkmale: für optimale Reinigung von Radnaben und Bremsscheiben ideal einsetzbar für PKW-, Transporter- und Grossraumlimousinen-Radnaben Schleifteller mit 1/2" Aufnahme zur Verwendung mit Schlagschraubern oder Akkuschlagschraubern (max. Drehzahl 7.000 U/min) einsetzbar kein Funkenflug verschleißarm - maximale Standzeit (pro Scheibe ca. 50 Fahrzeuge) verhindert durch saubere Kontaktflächen Verfälschung der Radanzugs-Drehmomente minimale Staubentwicklung durch offenporiges Schleifmittel Technische Daten: - Aufnahme in Zoll: 1/2 " - Gewicht [g]: 300 g - Herstellernummer: 100.4035 - Kapazität: 50 Fahrzeuge pro Scheibe - Teile im Satz: 2 -tlg. - UPM max.: 7000

  Read more less

  1 - 2 business days

  €40,53

• 

  Makita Makita DJR 187 G1K Cordless Reciprocating Saw 18 V Brushless + 1x battery 6,0 Ah + case - without charger

  1 Review

  Sun, 12/07/2025

  Scope of Delivery: - 1x Makita DJR 187 18 V cordless recipro saw - 1x Makita BL 1860 B 18 V 6.0 Ah rechargeable battery - 2x Makita saw blades - 1x Makita transport case - without charger Product Description: The tool is designed for sawing wood, plastic and ferrous materials The cordless reciprocating saw is a very compact yet powerful reciprocating saw. Thanks to the built-in brushless motor, the device works almost wear-free and therefore guarantees a very long service life. The variable speed setting makes it suitable for almost any sawing job. The electronic brake, the non-slip and ergonomic design and the tool-free saw blade change ensure the necessary safety and comfort when working. A belt hook is also attached to the housing, allowing you to simply hang the tool on your belt or trouser pocket when you are not using it. Technical Data: - Manufacturer: Makita - Manufacturer designation: DJR 187 - Battery voltage: 18 V - Stroke length: 32 mm - Stroke rate 1st stage: 0-2300 min-1 - Stroke rate 2nd stage: 0-3000 min-1 - Cutting depth in metal profiles/tubes: 130 mm - Cutting depth in wood: 255 mm - Weight: 3.8 kg - Sound pressure level: 84 dB (A) - Sound power level: 95 dB (A) - Measurement uncertainty (K): 3 dB (A) - Vibration emission (cutting wooden beams) 15.5 m/s2 - Vibration emission (cutting boards): 16.5 m/s2 - Measurement uncertainty (K): 1.5 m/s2 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €317,67

• 

  Makita Makita DJR 187 T1 Cordless Reciprocating Saw 18 V Brushless Reciprocating Saw + 1x 5.0 Ah battery - without charger

  Sun, 12/07/2025

  Scope of Delivery: - 1x Makita DJR 187 Z 18 V Li-Ion Cordless Reciprocating Saw Solo - 1x 5.0 Ah battery - without charger, without case Product Description: With this practical recipro saw from Makita, you can achieve very fast sawing progress. Effective dust protection prevents the ingress of dust and dirt. The saw blade can also be changed without tools. This saw is very light and easy to handle. There is also an adjustable guide shoe for optimum utilisation of the saw blade. With LED light. Technical Data: - Idle stroke speed level 1: 0 - 2,300 min-1 - Idle stroke speed level 2: 0 - 3,000 min-1 - Stroke height: 32 mm - Max. Max. cutting capacity pipe: 130 mm - Max. Cutting capacity wood 90°: 255 mm - Battery voltage: 18 V - Dimensions (LxWxH) mm: 439x83x231 - Weight: 3.4 kg - Sound pressure level (LpA): 84 dB(A) - Sound power level (LWA): 95 dB(A) - K-value noise: 3 dB(A) - Vibration sawing wood panel: 16.5 m/s² - Vibration sawing in wooden beams: 15.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €269,68

• 

  Oregon Tool Oregon CS 1400 chainsaw 1800 W 40 cm cutting length 3/8" chain pitch (603349)

  Sun, 12/07/2025

  Scope of Delivery: Product Description: Technical Data: For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €104,99

• 

  Festool Festool STF 80x133 sanding strips garnet P100 80 x 133 mm 100 pcs. ( 499628 ) for Rutscher RTS 400, RTSC 400, RS 400, RS 4, LS 130

  Sun, 12/07/2025

  Scope of Delivery: - 100x Festool STF 80X133 sanding strips garnet Product Description: The Festool STF 80X133 garnet sanding strips have a grit size of 100 and a diameter of 80 x 133 mm. The sanding strips are suitable for processing plaster filler and cementitious filler. They can also be used to remove paint and volatile organic compounds (VOCs). Even working on the hardest substrates, plastics, fillers or solid surface materials is no problem. The RTS 400, RTSC 400, RS 400, RS 4 and LS 130 sliders are compatible with the sanding strips. Festool is a premium manufacturer of power tools, characterised by a long tradition and very well-designed tools. Technical Data: - Manufacturer: Festool - Manufacturer number: 499628 - Manufacturer's description: Sanding strips - Dimensions: 80 x 133 mm - Grit size: P100 - Compatible: for RTS 400, RTSC 400, RS 400, RS 4, LS 130 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €33,92

• 

  Festool Festool sanding pad SSH STF 93 x 175/8 ( 483905 ) for slider RS 300, RS 3, LRS 93

  Sun, 12/07/2025

  Scope of Delivery: - 1x Festool sanding pad SSH-STF 93 x 175/8 Product Description: The Festool sanding pad with the StickFix Velcro system is used to hold the sanding paper on the RS 300, RS 3, LRS 93 sliders. It has 8 suction holes so that the sanded coating is sucked off directly and sanding residues are removed. The four screws included in the scope of delivery ensure that it sits securely and firmly on the slider. The StickFix Velcro backing allows the sanding paper to be changed quickly and easily. The workmanship and quality are guaranteed by the Festool quality standard. Technical Data: - StickFix Velcro pad - High-strength MPE plastic - Length: 175 mm - Width: 93 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €23,96

• 

  Makita Makita DRS 780 Z Cordless circular saw 36V ( 2x18V ) 185 mm Brushless Solo - without battery, without charger

  5 Reviews

  Sun, 12/07/2025

  Scope of Delivery: - 1x Makita DRS 780 Z cordless circular saw 36V ( 2x18V ) 185 mm - 1x Makita circular saw blade - 1x hexagon spanner 5 mm - without battery, without charger Product Description: The Makita DRS 780 cordless circular saw impresses with its short and compact design. It achieves a maximum cutting depth of 65 mm with the 185 mm saw blade. The rear handle and additional handle ensure precise guidance. The machine's deep charge protection protects the batteries; when the portable circular saw realises that the batteries are almost empty, it switches off automatically. The left-sided positioning of the saw blade provides an optimum view of the cutting line. The speed of the machine is automatically regulated and thus perfectly adapted to the workpiece (ADT Automatic torque Drive Technology). The ADT display indicates an overload of the hand-held circular saw by flashing. The DRS 780 also has an easy-to-read scale and clear angle markers. Thanks to Xtreme Protection Technology (XPT), the DRS 780 is protected against dust and splash water, even under harsh conditions. Technical Data: - Max. Cutting capacity 90°: 65 mm - Max. Cutting capacity 45°: 45 mm - Max. Mitre left / right: 53/0 ° - Idle speed: 5100 min-¹ - Product dimensions (L x W x H): 446 x 196 x 270 mm - Saw blade Ø / bore: 185x30 mm - Sound power level (LWA): 103 dB(A) - Sound pressure level (LpA): 92 dB(A) - K-value noise: 3 dB(A) - Vibration: ≤2.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €301,44

Show more products