All Tools
-
BS ROLLEN BS ROLLEN Steering wheel Elastic solid rubber hub l. 60 mm ( 9000443261 )
Mon, 10/20/2025
Scope of Delivery: - Steering wheel Elastic solid rubber hub l. 60 mm Product Description: Elastic solid rubber - with ball bearing - injection-moulded aluminium rim - for high load capacity - robust and abrasion-resistant - quiet running Technical Data: - nanFor commercial use, please observe the building regulations!
€31,35
-
GAH GAH Alberts Adjustable hinge ( 3000255576 ) 146x23x55x130x28x50x16x8mm
Mon, 10/20/2025
Scope of Delivery: - 1x GAH Adjustable hinge 146x23x55x130x28x50x16x8mm Product Description: for metal gates - for 180° opening - long version adjustable in width - one weld-on piece each for post and gate - hot-dip galvanised bolts and nuts, stainless steel bolts and cotter pins Technical Data: - Dimension g: 16mm - Dimension h: 8mm - Dimension c: 55mm - Dimension d: 130mm - Dimension l: 8mm - Dimension e: 28mm - Dimension a: 146mm - Dimension f: 50mm - Dimension b: 23mm - Surface: raw - Thread: M16 - Length: 130 mm - Material: Steel - Brand: GAHFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€24,28
-
PFERD PFERD backing pad COMBICLICK CC-GT Ø 115 -125 mm ( 4000843605 )
Mon, 10/20/2025
Scope of Delivery: - Backing pad COMBICLICK CC-GT Ø 115 -125 mm Product Description: Medium version - with this backing pad, COMBICLICK tools can be used on standard angle grinders - the geometry of the cooling slots ensures a high air flow rate, which significantly reduces the thermal load on the abrasive and the workpiece - the patented COMBICLICK clamping system reduces tool change times to a minimum Technical Data: - nanFor commercial use, please observe the building regulations!
€45,36
-
SSF SSF Tubular frame latch mortise lock ( 3324024259 ) 24/ 40 mm DIN left / right
Mon, 10/20/2025
Scope of Delivery: - 1x SSF tubular frame latch mortise lock 24/ 40 mm DIN left / right Product Description: to DIN 18251-2 - steel lock case closed at top and bottom - canted - forend stainless steel - forend length 170 mm - square 8 mm - can be used DIN left / right - latch made of die-cast zinc - without striking plate Technical Data: - Forend: Stainless steel - Bolt: Metal - Direction of attack: DIN left / right - Backset: 15mm - Latch: Metal - Square: 8mm - Backset: 40 mm - Faceplate width: 24 mm - Faceplate length: 170 mm - Standard: 18251 - Forend design: square - Lock case: closed at top and bottom - Brand: SSFFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€29,16
-
MAGNETOPLAN Magnetoplan flipchart ( 9000483150 ) writing surface W680xH1045mm height-adjustable up to 1.85 m
Mon, 10/20/2025
Scope of Delivery: - 1x MAGNETOPLAN flipchart writing surface W680xH1045mm - Delivery without flipchart pads Product Description: Metal back panel, for more stability - Tripod, infinitely height-adjustable up to 1850 mm - Magnetic, lacquered metal surface - Can be written on with board markers and wiped dry - Clamping strip with quick-release fastener, for securing flipchart paper - Full-length, hinged storage tray, for markers and accessories - Colour astral silver Technical Data: - Height: 80 mm - Writing surface height: 1045 mm - Colour: white - Brand: MAGNETOPLAN - Design: height-adjustable up to 1.85 m - Writing surface width: 680 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€85,40
-
NORRES NORRES AIRDUC(R) PUR 355 AS suction and delivery hose inner Ø 70 mm ( 4501400165 )
Mon, 10/20/2025
Scope of Delivery: - AIRDUC® PUR 355 AS suction and delivery hose Inner Ø 70 mm Product Description: Applications: flexible hose for high throughput of abrasive powder, bulk material, granulate and for gases, granulate conveyor, vacuum and suction conveyor, dosing system, big bag filling/emptying, shredder, grinder, extruder, injection moulding and PCB drilling machine, powdering, powder dusting: e.g. Printing industry, offset printing machine: air supply, air supply cabinet, industrial and hoover, potentially explosive area, conveying of seed/ fertiliser: drill and seeder, pneumatic grain conveyors, construction industry: road milling machine, raw material conveyor hose for sand, quartz, gravel, shards and chips, compactor/ compressor, side channel compressor, vacuum and pressure pump, paper industry/ packaging machine: edge trim suction, surface treatment: shot and sand blasting media recirculation (e.g. blasting cabin, shipyard), sandblasting machine: sandblasting machine, sandblasting machine (e.g. blasting cabin, shipyard), sandblasting machine (e.g. sandblasting machine), sandblasting machine (e.g. sandblasting machine), sandblasting machine (e.g. sandblasting machine).e.g. blasting cabin, shipyard, stripper), floor milling machine, grinding machine, sweeper, municipal vehicle: lawn and embankment mower, leaf vacuum/collector, vacuum lifter: vacuum supply line Properties: heavy-duty design, highly abrasion-resistant, increased pressure and vacuum resistance, microbe-resistant, good resistance to oil, petrol and chemicals, very good low-temperature flexibility, flame-retardant to: UL94-V2, flame retardant acc: DIN 4102-B1, wall permanently antistatic: contact resistance and surface resistance Construction: 1. spring steel wire firmly moulded into the wall, 2. wall: permanently antistatic premium ester polyurethane (Pre-PUR ® ), 3. wall thickness approx. 1.4 - 1.5 mm Temperature range: -40 ºC to +90 ºC (short +125 °C) Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Bending radius: 62.00mm - Physical state: Solid / gaseous - OverpressureDIN 26057(50% elongation)(bar): 1,800 (3,37) - Negative pressureDIN 26057(Axially fixed)(bar): 0.540 (1.00)For commercial use, please observe the building regulations!
€528,34
-
NORRES NORRES suction and blower hose CP PTFE_GLASS-INOX 471 400 mm 412.00 mm ( 4501403642 )
Mon, 10/20/2025
Scope of Delivery: - 1x NORRES suction and blower hose CP PTFE_GLASS-INOX 471 400 mm 412.00 mm Product Description: Clamp profile hose, double-layered, highly resistant to chemicals (up to +270°C) Applications: - flexible hose for hot and cold gases and for dusts, powders, fibres - chemical industry: chemical vapours, vapour recovery hose on loading arm, paint vapours, paint mist extraction Features: abrasion protection due to outer clamping profile - tensile clamping of the wall in the clamping profile - highly flexible + compressible 4:1 - very good heat resistance - anti-adhesive - good alkali and acid resistance - extremely good chemical resistance - RoHS compliant Temperature range: -150°C to 250°C - briefly up to 270°C Technical Data: - Bending radius: 88.00mm - Weight: 2.23kg/m - Physical state: GaseousFor commercial use, please observe the building regulations!
€1.557,38
-
Rothenberger ROTHENBERGER electric bender set ROBEND(R) 4000 15 - 18 - 22 - 28 mm ( 4000781303 )
Mon, 10/20/2025
Scope of Delivery: - Electric bending tool set ROBEND® 4000 15 - 18 - 22 - 28 mm - Basic device, bending segment with sliding shoe, plastic case Product Description: portable, robust and powerful electric bending device set - increased bending capacity enables cold bending of pipes up to 180° - universally applicable in sanitary and heating installations, pipework construction, refrigeration and air conditioning technology, industry and series production - fewer joints increase safety during installation Application benefits: quick amortisation due to savings on joints, soldering material and energy - universal application: overbends, counterbends, bunk bends and connection bends are possible at all levels - dimensionally stable and pressure-resistant, bending segments made of high-quality, forged aluminium - high-quality, precise and simple operation - deformation- and crease-free bending due to increased gliding ability - powerful 1.010 watt motor, 50 / 60 Hz Areas of application: suitable for pipes made of: - Copper (hard, semi-hard and soft DIN EN 1057, 12735-1, 13348): Ø 12-35 mm, (1/2-1.3/8″) - Copper and precision steel (coated): Ø 12-28 mm, (1/2-1.1/8″) - Precision steel (soft DIN 2391 / 2393 / 2394): Ø 12-28 mm, (1/2-1.1/8″) - Threaded steel (DIN 2440 / 2441): Ø 1/2″, 3/4″ - Seamless stainless steel (GW 541): Ø 12-28 mm, (1/2-1.1/8″) Technical Data: - Weight: 24.12kg - Version: 15 - 18 - 22 - 28mm - subject to inspection: yesFor commercial use, please observe the building regulations!
€1.870,02
-
Wera WERA screwdriver 335 Cutting edge width 5.5 mm ( 4000828514 )
Mon, 10/20/2025
Scope of Delivery: - Screwdriver 335 Cutting edge width 5.5 mm Product Description: Multi-component power moulded handle with roll-off protection - with hard grip zones for high working speed and soft grip zones for high torque transmission - blade made of high-quality molybdenum vanadium steel - nicromatt with laser tip - "bites" into the screw head and prevents it from slipping out of the screw head and protects against costly slips - most of the required contact pressure is eliminated - captive size guide system at the end of the handle as a time-saving identification aid for the respective screw type Technical Data: - Material: alloyed tool steelFor commercial use, please observe the building regulations!
€16,61
-
HELLER HELLER hammer drill Trijet Ultimate D.12,0mm Working-L.250mm L.310mm ( 4300000184 )
Mon, 10/20/2025
Scope of Delivery: - Hammer drill Trijet Ultimate D.12,0mm Working-L.250mm L.310mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
€33,88
-
AMF AMF square socket spanner DIN 248 size 12 mm length 235 mm ( 4000824882 )
Mon, 10/20/2025
Scope of Delivery: - Square socket spanner DIN 248 size 12 mm length 235 mm Product Description: single-arm with square socket - made of special steel - hardened and tempered in a burnished colour Technical Data: - Weight: 275gFor commercial use, please observe the building regulations!
€50,29
-
HELLER HELLER Bionic Pro hammer drill bit Ø 8.0 mm working length 150 mm length 210 mm ( 4000864762 )
Mon, 10/20/2025
Scope of Delivery: - Hammer drill Bionic Pro Ø 8.0 mm working length 150 mm length 210 mm Product Description: SDS-plus double cutter - the patented carbide drill head ensures a long service life and particularly fast drilling progress - even in reinforcement - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Areas of application: Concrete, concrete reinforcement, masonry, natural stone, sand-lime brick, tiles, marble, clinker brick Technical Data: - nanFor commercial use, please observe the building regulations!
€12,51
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"