All Tools
-
PFERD PFERD abrasive sleeve KSB D13xW25mm25 mm grit size 80 ( 4144200112 )
Mon, 10/06/2025
Scope of Delivery: - Sanding sleeve KSB D13xW25mm25 mm grit size 80 Product Description: Aluminium oxide A - for universal use from coarse to fine sanding - supplied without rubber backing Technical Data: - Drive type: Straight grinder, flexible shaft drive - Application recommendation: For best performance, use at a recommended cutting speed of 20-30 m/s. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For a secure fit of the abrasive sleeve, maintain the minimum speed of the abrasive sleeve carrier. To make it easy to change the sanding sleeves, turn them slightly clockwise to fit and remove them. Keep the abrasive sleeve carrier clamped in the tool drive. - Machinable materials: Grey/spheroidal cast iron (GG/GJL, GGG/GJS), malleable cast iron, brass, bronze, cast steel, cobalt-based alloys, aluminium, hardened, tempered steels over 1,200 N/mm² ( 54 HRC, steels up to 1,200 N/mm² ( - Machining tasks: Roughening, deburring, levelling, surface processing, fine grinding in stages, weld seam processing, edge processing, sharpening - Ordering information: Please order abrasive sleeve holder separately. - Ø inside: 13mm - RPM, opt., up to: 44000RPM - RPM, opt., from: 30000RPM - Safety instructions: The maximum permissible peripheral speed is 30 m/s. For safety reasons, the specified maximum permissible speed must never be exceeded. Do not allow the abrasive sleeves to protrude beyond the abrasive sleeve carrier. - Advantages: Maximum efficiency due to particularly high material removal and high aggressiveness of the abrasive. Secure fit of the abrasive sleeve on the abrasive sleeve carrier due to expansion of the carrier during use. Outstanding service life thanks to special manufacturing process - even under the toughest operating conditions.For commercial use, please observe the building regulations!
€26,11
-
GEKA GEKA Gewindenippel GEKA Messing ( 4000353548 )
Mon, 10/06/2025
Lieferumfang:1x GEKA Gewindenippel GEKA MessingProduktbeschreibung: Messing · mit Innen- und Außengewinde · Innengewindeseitig mit Flachdichtring NBR
€84,47
-
PLANAM PLANAM waistband trousers Canvas 320 size 50 ( 4705039002 )
Mon, 10/06/2025
Scope of Delivery: - 1x PLANAM Canvas 320 trousers size 50 Product Description: 65% polyester / 35% cotton - canvas weave - approx. 320 g/m² - fabric back very breathable, particularly hard-wearing, shrink-resistant according to DIN EN ISO 6330 - knee pockets made of Cordura® - 2 inset pouch pockets made of Cordura® - double ruler pockets made of Cordura® on the right - reflective piping on the pocket openings and pocket flaps - left thigh pocket with flap and press studs, elasticated waistband - 1 reinforced back pocket on the right - round waistband with 7 belt loops and jeans button this item is certified as knee protection according to EN 14404 type 2 level 1 in combination with a Planam knee pad available sizes on request: 42-64, 90-110 and 24-29 Technical Data: - Fabric weight approx.: 320g/m² - Finish: original Cordura® with PTFE coatingFor commercial use, please observe the building regulations!
€37,91
-
MAYKESTAG Maykestag quarter circle profile cutter DIN 6518 B type N ( 4117802018 ) radius 10 mm number of cutting edges 4
Mon, 10/06/2025
Scope of Delivery: - 1x MAYKESTAG quarter circle profile cutter radius 10 mm Product Description: HSS-Co - DIN 6518 B - type N - straight shank with driving face - for milling structural, case-hardening and heat-treatable steels - right-hand cutting Technical Data: - Shank Ø d2: 25mm - Material suitability INOX: limited suitability - Ø d3: 8mm - Material suitability cast iron: limited suitability - Material suitability steel: very suitable - Shape: concave - Material suitability non-ferrous metals: conditionally suitable - Radius: 10 mm - Nominal Ø d1: 28 mm - Total length l1: 85 mm - Number of cutting edges: 4 - Shank design: DIN 1835 B - Type: N - Coating: uncoated - Standard: DIN 6518 B - Cutting material: HSS-Co - Brand: MAYKESTAGPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
€89,84
-
Plastipol - Scheu GmbH & Co. KG Swivel stacking container ( 9000446940 ) PP blue
Mon, 10/06/2025
Scope of Delivery: - 1x swivel stacking container PP blue - Delivery without lid Product Description: made of polypropylene (PP) - can be nested inside each other or stacked effortlessly after a 180° turn - easy to handle - food-safe - temperature-resistant from -20 °C to +80 °C - limited resistance to oils, petrol and acids (please enquire) Technical Data: - Load capacity: 50kg - Temperature range: -20 to +80°C - Internal height: 295mm - Inner length: 450mm - Inner width: 330mm - Capacity: 50 litres - Colour: blue - Weight: 2.2kg - Outer length: 600 mm - Outer height: 300 mm - Outer width: 400 mm - Material: PolypropyleneFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€37,98
-
SHAVIV SHAVIV Deburring set Shaviv B ( 4114540051 )
Mon, 10/06/2025
Scope of Delivery: - Deburring set Shaviv B Product Description: The workhorse extremely tried and tested set for deburring holes, grooves and edges - accepts all B blades - blades can be clamped axially or radially as required with Classic A handle, B blade holder, B10, B20 blades for straight edges, internal machining front side Technical Data: - nanFor commercial use, please observe the building regulations!
€20,78
-
NORRES NORRES suction hose CP HiTex 487 125-127 mm 137.00 mm ( 4501403947 )
Mon, 10/06/2025
Scope of Delivery: - 1x NORRES suction hose CP HiTex 487 125-127 mm 137.00 mm Product Description: High-temperature hose, clamping profile hose, (up to +500°C) Applications: - flexible hose for hot and cold gases - engine test bench, exhaust gas measurement - high-temperature extraction: Furnace, foundry, blast furnace, smelter, ceramics industry, glass industry, steelworks, aluminium smelter - bellows, expansion joint Features: abrasion protection due to external clamping profile - tension-resistant clamping of the wall in the clamping profile - highly flexible + compressible - very good heat resistance - RoHS compliant Temperature range: -60°C to 450°C - briefly up to 500°C Technical Data: - Bending radius: 61.00mm - Weight: 1.60kg/m - Physical state: GaseousFor commercial use, please observe the building regulations!
€937,05
-
NORRES NORRES suction and blower hose CP PUR 455 FOOD Inner-Ø 350 mm Outer-Ø 362.00 mm ( 4501402824 )
Mon, 10/06/2025
Scope of Delivery: - 1x NORRES suction and blower hose CP PUR 455 FOOD Inner Ø 350 mm Outer Ø 362.00 mm Product Description: Bellows - compensator flexible hose for gases and for abrasive dusts - powders - fibres food industry - pharmaceutical industry: food - pharmaceuticals mixer - dryer - packaging machine - big bag filling and emptying - grinder conveying of e.g. Rice - dry foods - cereal products - sugar - milk powder - powder - coffee - tea - cereals - flour - frozen foods Glass industry High-temperature extraction Blast furnace Aluminium smelters Ceramic industry Food industry Food conveying Food industry Mixers Mills Big bag filling and emptying Furnace / ovens Pharmaceutical industry Pharmaceuticals Melting Steel mills Dryers Packaging machines Foundry CP -40°C to +90°C (+125°C) Abrasion-resistant suction hose + pressure hose - polyurethane hose FDA and EU compliant Ø up to 1.000 mm double-layer stainless steel (INOX) Clamping profile transparent (standard) other dimensions and lengths available on request CP construction Clamping profile support spiral: galvanised steel Wall: special premium ether polyurethane (Pre-PUR®) Technical Data: - Physical state: Gaseous - Operating pressure: 0.04barFor commercial use, please observe the building regulations!
€1.519,38
-
NÖLLE NÖLLE ring brush size 2 bristle length 70 mm 20 mm ( 4000817350 )
Mon, 10/06/2025
Scope of Delivery: - 1x NÖLLE ring brush size 2 bristle length 70 mm 20 mm Product Description: round - best light-coloured china bristles - worked to a finish - heat-resistant - solvent-resistant - double thread leader - nickel ring - raw wooden handle - for the highest demands Technical Data: - Tipping: light-coloured Chinese bristle - Ø: 20mm - Handle: raw wooden handleFor commercial use, please observe the building regulations!
€50,32
-
SKF SKF cylindrical roller bearing NU2213 ECP/C3 Inner Ø 65 mm Outer Ø 120 mm ( 8000530622 )
Mon, 10/06/2025
Scope of Delivery: - Cylindrical roller bearing NU2213 ECP/C3 Inner Ø 65 mm Outer Ø 120 mm Product Description: nan Technical Data: - nanFor commercial use, please observe the building regulations!
€140,86
-
SKYLOTEC SKYLOTEC retractable type fall arrester PEANUT I Length approx. 1.8 m Weight approx. 1.42 kg ( 8000468561 )
Mon, 10/06/2025
Scope of Delivery: - Retractable type fall arrester PEANUT I Length approx. 1.8 m Weight approx. 1.42 kg Product Description: ultra-compact retractable type fall arrester with STAK TRI carabiner attachment point side - the Peanut already contains the new One-4-All damper and is therefore approved for use weights 50-135 kg - 1.8 m long for use in aerial work platforms Technical Data: - Opening width: 22mm - Application: Aerial work platforms - Permissible maximum weight: 135kg - subject to inspection: yesFor commercial use, please observe the building regulations!
€223,45
-
FHB FHB FLORIAN work trousers size 48 ( 4000378981 )
Mon, 10/06/2025
Scope of Delivery: - 1x FHB work trousers FLORIAN size 48 Product Description: Twill, 50% cotton / 50% polyester, approx. 250 g/m² - fabric specially developed for FHB in a perfect blend of cotton and polyester - ergonomically perfect cut offers more freedom of movement - elasticated side gussets - 1 mobile phone pocket and 1 folding rule pocket on the left and right - knee pad pockets made of 100% polyamide (Cordura®) - various volume pockets on both sides of the trousers - innovative FHB flap pocket fastening solution - simple trouser extension by 3 cm possible on request available sizes: 42-44, 60-66, 84-114 and 23-30 Technical Data: - Fabric weight approx.: 250g/m²For commercial use, please observe the building regulations!
€96,35
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"