All Tools

Show previous products

• 

  Ruko RUKO twist drill ULTIMATECUT FS DIN 338 type N ( 4000605525 ) nominal Ø 3.3 mm 65 mm 5xD right-hand cutting

  Thu, 11/27/2025

  Scope of Delivery: - 1x RUKO twist drill, nominal Ø 3.3 mm Product Description: HSS-Co5 - DIN 338 - FLOWSTEP® point - point angle 118 ° - right-hand cutting - 3-face shank - precise centring without centre punching, even on round surfaces such as pipes drilling of large diameters without pre-drilling - easy and smooth drilling process, without jamming in the material - 3-face shank prevents spinning in the drill chuck - ideal for use in hand-held power tools - for non-ferrous metals, structural and carbon steels, high-alloy steels (e.g. V2A/V4A), tool steels, magnesium alloys, plastics as well as aluminium, Plexiglas and wood Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.08 mm/rev - Nominal Ø tolerance: h8 - Overall length: 65mm - Coating: Gold - Nominal Ø: 3.3 mm - Total length: 65 mm - Spiral length: 36 mm - Shank design: straight shank - Point angle: 118 ° - Receptacle Ø: 3.3 mm - Type: N - Standard: DIN 338 - Cutting material: HSS-Co5 - Drilling depth: 5xD - Brand: RUKOFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €43,96

• 

  Makita Makita GN 900 SE cordless gas nailer 7.2 V in transport case with 2x BL 7010 1.0 Ah battery and DC07SA charger

  Thu, 11/27/2025

  Scope of Delivery: - Makita GN 900 SE cordless gas nailer 7.2 V - Transport case (824990-1) - DC070SA charger (194320-3) - 2x Makita BL7010 1.0 Ah battery (194355-4) - Hexagon spanner 4 mm (783202-0) - Safety goggles (195246-2) Product Description: The handy and powerful GN 900 SE gas nailer from Makita makes working without a hose or compressor extremely convenient. A battery compartment with rubber insert protects the contacts from external influences and vibrations. The LED display warns of low battery voltage and malfunctions. One gas cartridge (not included) is sufficient for around 1,200 nails. The GN 900 has an adjustable depth impact and an empty impact safety device. Technical Data: - Pin length: 50 - 90 mm - Nail diameter: 2.9 - 3.3 mm - Magazine capacity: 44 nails - Nail angle: 34° - Battery voltage: 7.2 V - Battery capacity: 1.0 Ah - Dimensions: 321x108x368 mm - Weight: 3.2 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €503,95

• 

  DEWALT DeWalt DCD 791 D1 cordless drill driver 18 V 70 Nm brushless + 1x rechargeable battery 2.0 Ah + charger + TSTAK

  Thu, 11/27/2025

  Scope of Delivery: - 1x DeWalt DCD 791 cordless drill driver - 1x DeWalt DCB 183 18 V 2.0 Ah rechargeable battery - 1x DeWalt DCB charger - 1x DeWalt TSTAK case Product Description: The DeWalt DCD 791 cordless drill driver is ideal for most applications thanks to its very compact design and powerful motor with optimised 2-speed full metal gearbox. The safety electronics used by DeWalt (discharge protection, permanent monitoring of the battery temperature) enable problem-free long-term use of the cordless drill driver. The DeWalt DCD 791 is also equipped with an LED light, which makes working with the workpiece considerably easier thanks to the best possible illumination. A carbon brush-free motor (brushless) gives the DCD 791 an extremely long service life and up to 50% longer runtime. Technical Data: - Voltage: 18 V - Max. Torque 2nd gear (soft): 27 Nm - Max. Torque 1st gear (hard): 70 Nm - Idle speed 1st gear: 0-550 rpm - Idle speed 2nd gear: 0-2000 rpm - Drill chuck clamping width: 1.5 -13 mm - Max. Drilling capacity (wood): 40 mm - Max. Drilling capacity (metal): 13 mm - Max. Drilling capacity (masonry): 13 mm - Sound pressure: 76 dB(A) - Sound power: 87 dB(A) - Uncertainty factor (K): 3 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €168,31

• 

  Makita 2x Makita soft sanding disc for random orbital sander / sanding machine 150 mm M8 ( 196684-1 )

  Thu, 11/27/2025

  Scope of Delivery: - 2x Makita soft sanding disc for random orbital sander / grinder 150 mm M8 ( 196684-1 ) Product Description: The Makita soft sanding disc is a high-quality sanding disc for a wide range of random orbital sanders / grinders. These include the BO 5010, 5012, 5020, 5021, 5041, 5030, 5031, 5041 and BBO180 machines. Makita is a leading manufacturer of power tools, characterised by a long tradition and high quality workmanship. Technical Data: - Manufacturer: Makita - Manufacturer's name: Sanding disc soft 150 mm - Manufacturer number: 196684-1 - Diameter: 150 mm - Weight: 100 g - Attachment: Velcro - Connection thread: M8 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €59,35

• 

  DEWALT DeWalt DCD 791 D2 cordless drill driver 18 V 70 Nm brushless + 2x rechargeable battery 2.0 Ah + charger + TSTAK

  Thu, 11/27/2025

  Scope of Delivery: - 1x DeWalt DCD 791 cordless drill driver - 2x DeWalt DCB 183 18 V 2.0 Ah rechargeable batteries - 1x DeWalt DCB charger - 1x DeWalt TSTAK case Product Description: The DeWalt DCD 791 cordless drill driver is ideal for most applications thanks to its very compact design and powerful motor with optimised 2-speed full metal gearbox. The safety electronics used by DeWalt (discharge protection, permanent monitoring of the battery temperature) enable problem-free long-term use of the cordless drill driver. The DeWalt DCD 791 is also equipped with an LED light, which makes working with the workpiece considerably easier thanks to the best possible illumination. A carbon brush-free motor (brushless) gives the DCD 791 an extremely long service life and up to 50% longer runtime. Technical Data: - Voltage: 18 V - Max. Torque 2nd gear (soft): 27 Nm - Max. Torque 1st gear (hard): 70 Nm - Idle speed 1st gear: 0-550 rpm - Idle speed 2nd gear: 0-2000 rpm - Drill chuck clamping width: 1.5 -13 mm - Max. Drilling capacity (wood): 40 mm - Max. Drilling capacity (metal): 13 mm - Max. Drilling capacity (masonry): 13 mm - Sound pressure: 76 dB(A) - Sound power: 87 dB(A) - Uncertainty factor (K): 3 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €182,64

• 

  Makita Makita JS1601 tin snips with 380 watts solo

  Thu, 11/27/2025

  Scope of Delivery: - 1 x JS1601 Sheet metal shears with 380 watts solo Product Description: With the JS1601 sheet metal shears from Makita, you get a highly powerful tool for clean cuts on your desired workpieces. The robust design of the JS1601 is particularly noteworthy, and it is also very handy and compact to ensure excellent handling. It should be mentioned that the cutting chip rolls sideways and spirally during the cutting process, so that you can work cleanly and without disturbing chip development. Technical Data: - Power consumption : 380 watts - Idle stroke rate : 4,500 min-1 - Smallest cutting radius: 250 mm - Cutting capacity 200 N/mm²: 2.5 mm - Cutting capacity 400 N/mm²: 1.6 mm - Cutting capacity 600 N/mm²: 1.2 mm - Cutting capacity 800 N/mm²: 0.8 mm - Dimensions (LxWxH) mm: 320x56x78 - Weight: 1.4 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €315,81

• 

  DEWALT DeWalt DCD 791 NT cordless drill driver 18 V 70 Nm brushless + 1x rechargeable battery 2.0 Ah + TSTAK - without charger

  Thu, 11/27/2025

  Scope of Delivery: - 1x DeWalt DCD 791 cordless drill driver - 1x DeWalt DCB 183 18 V 2.0 Ah rechargeable battery - 1x DeWalt TSTAK case - without charger Product Description: The cordless drill driver is ideal for most applications thanks to its very compact design and powerful motor with optimised 2-speed full metal gearbox. The brushless motor works without carbon brushes and is therefore completely wear-free. This significantly increases efficiency and the battery needs to be charged less often. The safety electronics used by DeWalt (discharge protection, permanent monitoring of the battery temperature) enable problem-free long-term use of the cordless drill driver. The DeWalt DCD 791 is also equipped with an LED light, which makes working with the workpiece considerably easier thanks to the best possible illumination. The battery with Li-Ion technology, which maximises the service life and running time of the batteries, can be used for all 18 V XR Li-Ion devices from DeWalt. For an optimum overview of the battery charge, the batteries are also equipped with an LED capacity indicator. The set comes in a practical DeWalt case. With the 3 mm thick box walls and the bi-metal comfort handle, the box is robust yet easy to transport. Technical Data: - Voltage: 18 V - Max. Torque 2nd gear (soft): 27 Nm - Max. Torque 1st gear (hard): 70 Nm - Idle speed 1st gear: 0-550 rpm - Idle speed 2nd gear: 0-2000 rpm - Drill chuck clamping width: 1.5 -13 mm - Max. Drilling capacity (wood): 40 mm - Max. Drilling capacity (metal): 13 mm - Max. Drilling capacity (masonry): 13 mm - Sound pressure: 76 dB(A) - Sound power: 87 dB(A) - Uncertainty factor (K): 3 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €151,08

• 

  Makita Makita DEAWST06 / WST 06 Underframe with supports for all crosscut and mitre saws

  Thu, 11/27/2025

  Scope of Delivery: - Makita DEAWST06 Underframe Product Description: With the DEAWST06 base frame, all Makita cross-cut and mitre saws can be mounted without tools. The DEAWST06 also has a lightweight design and compact transport dimensions. The base frame features a folding mechanism and is equipped with transport rollers and carrying handles. Technical Data: - Size (LxWxH) in mm: 117 x 28 x 27 - Weight: 16 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €197,90

• 

  Bosch Professional Bosch GSB 18V-25 Professional cordless impact drill 18 V 56 Nm ( 06019K9301 ) + L-Boxx - without battery, without charger

  Thu, 11/27/2025

  Scope of Delivery: - 1x Bosch GSB 18V-25 Professional cordless impact drill - 1x Bosch L-Boxx 136 - without battery, without charger Product Description: The Bosch GSB 18V-25 Professional cordless impact drill offers cordless freedom, great convenience and maximum safety for a wide range of applications. Thanks to its impact drilling function, it is not only suitable for driving screws into wood, but also for drilling into masonry, metal and wood. The powerful 18 V motor provides the necessary power for demanding jobs - whether on the construction site or in the workshop. Electronic protection functions prevent overheating and overloading, giving both the motor and the battery a longer service life. The GSB 18V-25 Professional is compatible with all Bosch Professional 18V batteries and chargers, ensuring a high degree of flexibility and cost-effectiveness. With a drilling diameter of up to 35 mm in wood and 10 mm in masonry or metal, the tool is ideal for professional craftsmen and demanding DIY enthusiasts looking for reliability, precision and efficiency in a compact tool. Technical Data: - Manufacturer: Bosch - Manufacturer designation: GSB 18V-25 Professional - Manufacturer: 06019K9301 - Torque (soft/hard/max.): 21/56/- Nm - Idle speed (1st gear / 2nd gear): 0 - 440 / 0 - 1,650 min-1 - Battery voltage: 18.0 V - Weight excl. battery: 1.2 kg - Packaging dimensions (width x length x height): 224 x 234 x 94 mm - Vibration emission value (drilling in metal) ah: 1 m/s² - Uncertainty K: 1.5 m/s² - Vibration emission value (impact drilling in masonry) ah: 12.8 m/s² - Uncertainty K: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €106,01

• 

  WYPALL WYPALL cleaning cloth WYPALL(R) L20 7400 L420xW330approx. mm ( 9000469743 )

  Thu, 11/27/2025

  Scope of Delivery: - 1xWYPALL cleaning cloth WYPALL® L20 7400 L420xW330approx. mm - 1 BRAG box with 2 clips with 140 sheets each = 280 sheets in total Product Description: great reliability for all types of wiping and cleaning jobs - ideal solution for medium-duty cleaning jobs such as glass polishing and surface or tool cleaning - supplied in the versatile BRAG Box, which is equipped with compressed technology for optimum storage, it offers immediate access to hygienically protected wipes at work and on the move - made from 100% recycled fibres - The dimensions of a wipe are 42 cm (L) x 33 cm (W). 1 BRAG box with 2 clips with 140 sheets each = 280 sheets in total Technical Data: - PU/pallet: 110 cartonsFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €60,51

• 

  EDDING Edding industrial paste marker 950 ( 9000487932 ) blue

  Thu, 11/27/2025

  Scope of Delivery: - 1x EDDING industrial paste marker blue Product Description: for labelling rough surfaces, soiled materials, rusty metals, even under water - highly opaque, highly permanent colour paste - smudge-proof and waterproof after drying - light-resistant - can be used at surface temperatures from -10 °C to 150 °C Technical Data: - Colour: blue - Line width: 10 mm - Tip shape: Round tip - Brand: EDDING - Model: 950For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €57,27

• 

  Festool Festool MPA-Microfibre/2 Microfasertuch ( 205732 )

  within 7 working days

  - für perfektes Lack-Finish- zum Entfernen von Poliermittelrückständen und FingerabdrückenBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!

  Read more less

  1 - 2 business days

  €25,75

Show more products