Best sellers for the week
-
Fiskars Fiskars small fan broom QuikFit(TM) ( 4000722212 ) working width 125 mm
Thu, 10/16/2025
Scope of Delivery: - 1x FISKARS small fan broom working width 125 mm Product Description: for removing loose moss, weeds and grass clippings from small lawns or narrow beds - 7 flat steel tines - black/orange Technical Data: - Number of tines: 7 - Working width: 125 mm - Length: 485 mm - Brand: FISKARPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
€20,41
-
KLINGSPOR KLINGSPOR adhesive grinding disc PS 22 K GLS 51 150 mm grit 180 ( 8000353005 )
Thu, 10/16/2025
Scope of Delivery: - Adhesive grinding disc PS 22 K GLS 51 150 mm grit 180 Product Description: Aluminium oxide - universal grinding disc for metal and woodworking - homogeneous grinding pattern - velcro-bonded Technical Data: - Bond: Synthetic resin - Type of use: Random orbital sander - Spreading type: semi-open - Type of packaging: CardboardFor commercial use, please observe the building regulations!
€29,44
-
EXACT Exact tap bit set DIN 3126 ( 4000867590 ) M3-M10 7-piece plastic box
Thu, 10/16/2025
Scope of Delivery: - 1x EXACT tap bit set M3-M10 7-piece set Product Description: HSS tap with 6.3 mm (1/4″) hexagonal shank to DIN 3126 - self-centring Contents: 1 each M 3 / 4 / 5 / 6 / 8 / 10 + 1 bit adapter Technical Data: - Contents: 7 pieces - Packaging: Plastic box - Standard: DIN 3126 - Cutting material: HSSG - Thread nominal Ø: M3-M10 - Drive: 1/4 ″ - Shank design: DIN 3126 - Shank: 1/4″ hexagonal shank - Drive mm: 6.3 mm - Brand: EXACTPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
€40,57
-
PFERD PFERD flap disc ( 8000429664 ) Ø25xH25mm grit 120 shank Ø 6 mm
Thu, 10/16/2025
Scope of Delivery: - 1x PFERD flap disc Ø25xH25mm grit size 120 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Straight grinder, flexible shaft drive - Application recommendation: Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure makes the surface slightly coarser. The softer the material to be processed, the coarser the surface (when using , Use a suitable grinding oil for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. The stock removal rate should be increased by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. - Machinable materials: Steel materials with a hardness > 54 HRC, cast steel, aluminium, malleable cast iron, brass, copper, grey/spheroidal cast iron (GG/GJL, GGG/GJS), stainless steel (INOX), steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€11,32
-
SULO SULO Deckel Polyethylen gelb ( 9000466227 )
Thu, 10/16/2025
Lieferumfang:1x SULO Deckel Polyethylen gelbProduktbeschreibung: für 240 l Müllgroßbehälter · aus stabilem HDPE · mit Griffen für leichtes Öffnen
€25,02
-
EDI EDI window handle 1003/2035 aluminium F2 / nickel silver coloured ( 3000261190 )
Thu, 10/16/2025
Scope of Delivery: - Window handle 1003/2035 aluminium F2 / nickel silver coloured Product Description: lockable - with push cylinder and 1 key (always keyed alike) - with ratchet - cam Ø 10 mm - 7 mm square spindle Technical Data: - Handle length: 110mm - Cam-Ø: 10mm - Hole spacing: 43mm - Base thickness: 12,5mm - Square: 7mmFor commercial use, please observe the building regulations!
€25,33
-
Ruko RUKO twist drill DIN 340 type N nominal Ø 9 mm ( 4000600999 )
Thu, 10/16/2025
Scope of Delivery: - Twist drill DIN 340 type N nominal Ø 9 mm Product Description: HSS - DIN 340 - type N - point angle 118 ° - profile ground - taper ground - with straight shank - right-hand cutting - high-performance twist drill with increased concentricity in long design - suitable for deep drilling work in common materials - high fracture resistance - low feed rates and more frequent chip evacuation are required for deep-hole drilling - for alloyed and unalloyed steel and cast steel (up to approx. 900 N/mm² strength), grey cast iron, malleable cast iron, ductile cast iron, die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, bronze and brass Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.18 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€47,98
-
PFERD PFERD mini cup brush TBU 1503/3 INOX 0.10 D15xW3xL5mm ( 4000840582 )
Thu, 10/16/2025
Scope of Delivery: - Mini cup brush TBU 1503/3 INOX 0.10 D15xW3xL5mm Product Description: suitable for light brushing work such as deburring, cleaning and polishing - particularly suitable for brushing work on small surfaces thanks to the entire brush surface on the end face - brass brushes also suitable for working on soft non-ferrous metals - shaft Ø 3 mm Technical Data: - nanFor commercial use, please observe the building regulations!
€45,05
-
ELKA RAINWEAR Elka Rainwear thermal pants ( 4000380625 ) size M
Thu, 10/16/2025
Scope of Delivery: - 1x ELKA RAINWEAR thermal pants size M Product Description: 100% polyester Cooldry, 180 g/m² - Cooldry® insulating and breathable base fabric - lightweight and quick-drying - 20% stretch - elasticated waistband - contrast flatlock seams - regular fit - packed in a practical box Technical Data: - Fabric weight approx.: 180g/m² - Colour: black - Size: M - Material: 100% POLYESTER COOLDRY® - Who for: Unisex - Brand: ELKA RAINWEARFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€23,69
-
MEGA Mega suction and high-pressure coupling ( 4000300133 ) Brass hose size 13 mm
Thu, 10/16/2025
Scope of Delivery: - 1x MEGA suction and high-pressure coupling brass hose size 13 mm Product Description: Brass - with swivel joint - operating pressure up to max. 25 bar - claw width 40 mm Technical Data: - Tube size: 13 mm - Claw width: 40 mm - Hose size (inch): 1/2 ″ - Material: Brass - Brand: MEGAFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€16,46
-
EWO EWO Stecknippel Messing Stecker DN 7,2 ( 4000351741 )
Thu, 10/16/2025
Lieferumfang:1x EWO Stecknippel Messing Stecker DN 7,2Produktbeschreibung: Messing
€18,69
-
NORRES NORRES suction and blower hose CP PTFE-INOX 475 EC 250 mm 262.00 mm ( 4501403786 )
Thu, 10/16/2025
Scope of Delivery: - Suction and blower hose CP PTFE-INOX 475 EC 250 mm 262.00 mm Product Description: Electrically conductive clamping profile hose, highly resistant to chemicals (up to +270°C) Applications: - flexible hose for hot and cold gases and for dusts, powders, fibres - suction arm - chemical industry: chemical vapours, vapour recovery hose on loading arm, paint vapours, paint mist suction - potentially explosive areas Properties: abrasion protection due to external clamping profile - tensile clamping of the wall in the clamping profile - highly flexible + compressible 4:1 - very good heat resistance - anti-adhesive - good alkali and acid resistance - extremely good chemical resistance - surface resistance PTFE film Technical Data: - Bending radius: 58.00mm - Weight: 1.24kg/m - Physical state: GaseousFor commercial use, please observe the building regulations!
€2.814,60
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"