Best sellers for the week

Show previous products

• 

  DEWALT DeWalt DCF 887 NT cordless impact wrench 18 V 205 Nm 1/4" brushless + 1x rechargeable battery 2.0 Ah + TSTAK - without charger

  Mon, 11/17/2025

  Scope of Delivery: - 1x DeWalt DCF 887 cordless impact wrench - 1x DeWalt DCB 183 18 V 2.0 Ah rechargeable battery - 1x DeWalt TSTAK case - without charger Product Description: The DeWalt DCF 887 is a 205 Nm, 18 V battery-powered impact wrench with 1/4" hexagon socket. The brushless high-performance motor with optimised 3-stage electronics is suitable for the heaviest applications and guarantees efficient work progress with a length of just 134 mm and a weight of 0.94 kg (without battery). A perfectly coordinated speed and impact ratio as well as the extremely compact and balanced design and a rubberised, ergonomic handle ensure safety and a high level of working comfort for every application in a wide range of work areas. The robust 1/4" hexagon socket, into which bits with a length of 25 mm can also be ideally inserted, is surrounded by a diode ring with three powerful LEDs, which ensures optimum visibility in darkened work areas on the construction site. Technical Data: - Voltage: 18 volts - Max. Torque: 205 Nm - Output power: 400 watts - Idle speed: 0 - 1000, 0 - 2800, 0 - 3250 rpm - Idle speed: 0 - 3800 rpm - Tool holder: 6.35mm (1/4") - Weight: 0.94 kg - Length: 134 mm - Height: 195 mm - Triaxial vibration strength (impact drilling): 22 m/s² - Vibration uncertainty factor K1: 2.1 m/s² - Sound pressure: 96 dB(A) - Sound pressure uncertainty factor K1: 3 dB(A) - Sound power: 107 dB(A) - Sound power uncertainty factor K2: 3 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €146,55

• 

  DEWALT DeWalt DCG 412 cordless angle grinder 18V 125mm solo + 1x rechargeable battery 2.0Ah - without charger

  Mon, 11/17/2025

  Scope of Delivery: - 1x DeWalt DCG 412 cordless angle grinder - 1x DeWalt DCB 183 2.0 Ah XR rechargeable battery - 1x additional handle - 1x protective cover for grinding - 1x clamping spanner - without charger Product Description: The tool is suitable for use as a grinder, wire brush and cut-off machine, but is not suitable for sanding and polishing. The angle grinder with a 125 mm diameter and very flat gearbox housing allows you to work in confined spaces. The built-in helical gearbox ensures low vibration and maximises the service life of the machine. The integrated locking switch ensures safe use of the sander, while the dual-position side handle guarantees perfect machine control for all applications. The quick-change nut enables easy and safe disc changes in the shortest possible time in addition to the supplied protective cover, which can be adjusted quickly and easily without tools according to the user's requirements. The angle grinder has an air-cooled PM58 high-performance motor and replaceable carbon brushes. The battery with 2 Ah battery capacity impresses with its compact design and robust housing. The battery with Li-Ion technology, which maximises the service life and runtime of the batteries, can be used for all 18 V XR Li-Ion tools from DeWalt. The batteries are also equipped with an LED battery capacity indicator for an optimum overview of the battery charge. Technical Data: - Battery voltage: 18 V - Max. Disc diameter: 125 mm - Drive spindle: M14 - Idle speed: 8000 rpm - Weight (without battery): 2.2 kg - Sound pressure: 84 dB(A) - Sound power: 95 dB(A) - Sound pressure measurement uncertainty: 5 dB(A) - Sound power measurement uncertainty: 3.5 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €169,05

• 

  DEWALT DeWalt DCB 1102 D1 Battery Starter Set 18 V with 1x battery 2.0 Ah + DCB 1102 charger

  Mon, 11/17/2025

  Scope of Delivery: - 1x DeWalt DCB 183 18 V 2.0 Ah battery - 1x DeWalt DCB 1102 battery charger Product Description: The DeWalt DCB 183 is an 18 V Li-Ion battery with a capacity of 2.0 ampere hours. It is compatible with all 18 V XR cordless machines from DeWalt. It has an LED charge level indicator and can boast a long service life and long runtime. Thanks to the Li-ion technology, the battery has no memory effect. With the DeWALT DCB1102 2-amp charger you can keep your DEWALT 12V, 18V and FLEXVOLT® 18V/54V batteries ready for use at all times. Thanks to the two-stage LED charge level indicator, you can see at a glance when your battery is fully charged, allowing you to continue working efficiently and without interruption. For simple and space-saving storage, the charger can also be easily mounted on the wall using two screws (not included). Technical Data: - Manufacturer: DeWalt - Manufacturer designation: DCB 1102 D1 - DCB183: - Voltage: 18 V - Capacity: 2.0 Ah - Battery technology: Li-Ion - DCB 1102: - For battery type: 12 / 18 Volt - Charging current: 2 A - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €64,05

• 

  DEWALT DeWalt DCF 887 N cordless impact wrench 18 V 205 Nm 1/4" brushless + 1x rechargeable battery 2.0 Ah - without charger

  Mon, 11/17/2025

  Scope of Delivery: - 1x DeWalt DCF 887 cordless impact wrench - 1x DeWalt DCB 183 18 V 2.0 Ah rechargeable battery - without charger Product Description: The DeWalt DCF 887 is a 205 Nm, 18 V battery-powered impact wrench with 1/4" hexagon socket. The brushless high-performance motor with optimised 3-stage electronics is suitable for the heaviest applications and guarantees efficient work progress with a length of just 134 mm and a weight of 0.94 kg (without battery). A perfectly coordinated speed and impact ratio as well as the extremely compact and balanced design and a rubberised, ergonomic handle ensure safety and a high level of working comfort for every application in a wide range of work areas. The robust 1/4" hexagon socket, into which bits with a length of 25 mm can also be ideally inserted, is surrounded by a diode ring with three powerful LEDs, which ensures optimum visibility in darkened work areas on the construction site. Technical Data: - Manufacturer: DeWalt - Manufacturer designation: DCF 887 - Voltage: 18 volts - Max. Torque: 205 Nm - Power output: 400 watts - Idle speed: 0 - 1000, 0 - 2800, 0 - 3250 rpm - Idle speed: 0 - 3800 rpm - Tool holder: 6.35mm (1/4") - Weight: 0.94 kg - Length: 134 mm - Height: 195 mm - Triaxial vibration strength (impact drilling): 22 m/s² - Vibration uncertainty factor K1: 2.1 m/s² - Sound pressure: 96 dB(A) - Sound pressure uncertainty factor K1: 3 dB(A) - Sound power: 107 dB(A) - Sound power uncertainty factor K2: 3 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €130,38

• 

  Toolbrothers Toolbrothers RHINO Container Set No. 4 Workshop wall with 4 containers for L Organiser height M+ / L and L Drawer 3

  60 Reviews

  Mon, 11/17/2025

  Scope of Delivery:- 1x RHINO workshop wall- 4x container 235 x 64 x 60 mm Product Description:With the RHINO Container Set No. 4 from Toolbrothers, organising the workshop is no longer a problem. The 4 containers can be freely attached to the workshop wall so that you can enjoy individual alignment and organisation. The plate is easy to attach to the wall. The containers can also be used in the L organisers height M+ / L and the Drawer 3, making them an individually usable transport option for various small parts. Technical Data:Manufacturer: ToolbrothersManufacturer's designation: RHINO Container Set No. 4Workshop wall dimensions ( LxW ): 390 x 350 mmDimensions container 1 ( LxWxH ): 235 x 64 x 60 mmSpecial features: Container compatible with RHINO L organiser height M+ / L and Drawer 3, simply insert boxes from tool wall into RHINO case and take them with you to the construction site (take your workshop with you everywhere!), workshop wall can be combined endlessly with other workshop walls  For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €21,68

• 

  Makita Makita DCL 180 ZW cordless hoover 18 V white solo - without battery, without charger

  Mon, 11/17/2025

  Scope of Delivery: - 1x Makita DCL 180 18 V Li-Ion cordless hoover white - 1x floor nozzle - 1x crevice nozzle - 1x extension tube - without battery, without charger Product Description: The DCL 180 cordless hoover from Makita is a compact and handy 18 V hoover. It combines high suction power with low noise levels and is versatile thanks to the extension tube supplied. It can be used either in the workshop or at home. Thanks to the floor nozzle and crevice nozzle supplied, neither large surfaces nor small corners pose a challenge. The rubberised handle ensures safe and comfortable handling. Makita is a leading manufacturer of power tools with a large 18 V battery system range and a long tradition. Technical Data: - Manufacturer: Makita - Manufacturer name: DCL 180 - Battery voltage: 18 V - Capacity (dust bag): 0,65 L - Vacuum pressure: 3.6 kPa - Max. Air flow rate: 1.3 m³ / min - Weight (without battery): 1.2 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €56,96

• 

  Makita Makita BCL 180 ZW 18 V Li-Ion cordless hoover WHITE solo - only the appliance

  Mon, 11/17/2025

  Scope of Delivery: - Makita BCL 180 ZW 18 V Li-Ion cordless hoover WHITE solo - without accessories Product Description: The Makita BCL 180 ZW is an 18 volt, battery-powered hand-held hoover with an integrated plastic strainer basket filter. The handy, low-noise yet powerful cordless upright hoover with a large dust capacity is ideal for heavy-duty work, on construction sites in residential areas or for cleaning vehicles. A rubberised soft grip reduces hand fatigue, even during long periods of work. Compatibility with the latest Li-Ion battery generation from Makita means that the running performance can be increased many times over. Technical Data: - Rated voltage: 18 V - Capacity (dust bag): 0.65 litres - Vacuum pressure: 36 mbar - Max. Air flow: 1.3 m³ / min - Weight (without battery): 1.2 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €56,96

• 

  Makita Makita EN420MP Floor cutting attachment 25 cm cutting length ( 197985-0 ) for DUX 60 / EX2650LHM

  Mon, 11/17/2025

  Scope of Delivery: - 1x Makita EN420MP floor cutting attachment 25 cm cutting length Product Description: The Makita EN420MP ground cutting attachment is a powerful companion for all jobs involving undergrowth or thickets. The 25 cm cutting length and the rubberised handle provide the user with the necessary comfort for heavy gardening work. The EN420MP also has an infinitely variable clamping adjustment and impact protection. The EN420MP ground cutting attachment is compatible with the DUX 60 cordless multifunction drive or the EX2650LHM petrol multifunction drive from Makita. Technical Data: - Manufacturer: Makita - Manufacturer's description: EN420MP - Manufacturer number: 197985-0 - Cutting length: 25 cm - Compatible: DUX 60 / EX2650LHM - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €229,96

• 

  Toughbuilt Toughbuilt StackTech TB-B1S3-A-50 mount 3 pcs.

  Mon, 11/17/2025

  Scope of Delivery: - 3x Toughbuilt StackTech TB-B1S3-A-50 mount Product Description: The Toughbuilt StackTech TB-B1S3-A-50 mount offers an innovative way to attach your ClipTech pouches to the sides of StackTech toolboxes. This flexible solution allows you to swap and reorganise the bags as you wish. The holders are not only compatible with all StackTech toolboxes, but also fit perfectly with the steel slots of the ToughBuilt "Workshop Organisation". For quick and easy repositioning, each holder is equipped with a quick-release button. In addition, robust steel hooks ensure that your tool equipment is securely and reliably fastened so that you always have everything to hand. Technical Data: - Manufacturer: Toughbuilt - Manufacturer number: TB-B1S3-A-50 - Manufacturer's description: StackTech mount - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €22,99

• 

  Toughbuilt Toughbuilt TB-H4S2-03 cutter knife + 2x blade magazine + 10x spare blade

  Mon, 11/17/2025

  Scope of Delivery: - 1x Toughbuilt TB-H4S2-03 cutter knife - 2x blade magazine - 10x spare blade Product Description: The Toughbuilt Reload Utility Cutter knife sets new standards in terms of user-friendliness and efficiency. With its patented blade quick-loading mechanism, it enables blades to be reloaded quickly at the touch of a button, significantly speeding up work steps. The scope of delivery includes not only the knife itself, but also two blade magazines with blades, so you can get started right away. The ergonomic, non-slip rubber handle also features a finger guard, which ensures greater safety while making the knife particularly durable and comfortable to use. Thanks to the innovative blade release button, you can change the blades easily and without tools - practical and quick, without much effort. Another practical feature is the integrated 3-position indicator switch in the magazine, which helps you to recognise the type of blade loaded at a glance without having to take the magazine out of your pocket. The Toughbuilt Reload offers space for a total of 15 blades per magazine - five in the automatic loading chamber and ten in the storage compartment, so you always have enough supplies to hand. The set also includes both straight and hook blades, which are ideal for a wide range of applications. Technical Data: - Manufacturer: Toughbuilt - Manufacturer's designation: TB-H4S2-03 Reload Utility - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €29,45

• 

  Festool Festool HW S8 D30/20 slot cutter 30 x 20 x 60 x 8 mm ( 490976 ) for router OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200

  Mon, 11/17/2025

  Scope of Delivery: - 1x Festool HW S8 D30/20 slot milling cutter Product Description: With the HW slot cutter, you can easily achieve perfect milling results when drilling, grooving, rebating and slot milling. Thanks to its precise work and long service life, this router bit is the ideal choice for demanding projects. The soldered carbide cutting edge ensures a long tool life even when plunging. The optimum cutting edge geometry, a stable cutter shaft and the correct grinding ensure flawless surfaces when grooving in furniture construction, routing fittings, rebating solid wood and panel materials and working with templates. Technical Data: - Manufacturer: Festool - Manufacturer's designation: HW S8 D30/20 - Manufacturer number: 490976 - Diameter: 30.00 mm - Effective length: 20.00 mm - Total length: 60.00 mm - Shank thickness: 8 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €72,81

• 

  KS Tools KS TOOLS Bremskolben-Rücksteller, schmal, 80mm ( 150.2056 )

  Mon, 11/17/2025

  Produktbeschreibung:Bremskolben-Rücksteller, schmal, 80mm · Bremskolben-Rücksteller, schmalMerkmale: universal einsetzbar - nahezu für alle gängigen Fahrzeugtypen ohne integrierte Handbrems-Feststelleinrichtung geeignet ideal geeignet zum beschädigungsfreien Zurücksetzen des Scheiben-Bremskolbens geringer Kraftaufwand durch Spindelantrieb ermöglicht zentriertes Zurücksetzen des Bremskolbens ohne zu verkanten keine Beschädigung von Manschetten, Kolben und Kolbenbohrungen im Bremssattel Zweckentfremdung anderer Werkzeuge entfällt wird im Zuge von Wartungsarbeiten und beim Austausch der Bremsklötze benötigt, um den Bremskolben in den Bremssattel zurück zu drücken ideal geeignet für Schwimmsättel mit Einfachkolben und Festsättel mit zwei Kolben hohe Stabilität und Verschleißfestigkeit durch gehärtete Platten und Führungsbolzen hohe Präzision garantiert einen leichten und dauerhaften Einsatz Spezial-Werkzeugstahl Technische Daten: - Gewicht [g]: 960 g - Herstellernummer: 150.2056 - Höhe in mm: 110.0 mm - Länge mm: 135 mm - Spannweite max. in mm: 80 mm - Spannweite min. in mm: 13.0 mm - Videolink Anwendung: https://youtu.be/SwwVZOW0qII

  Read more less

  1 - 2 business days

  €72,68

Show more products