Brushes
-
PFERD PFERD brush PBU INOX ( 8000432615 ) Ø 15 mm wire thickness 0.35 mm 18000 min-¹
Tue, 09/16/2025
Scope of Delivery: - 1x PFERD brush Ø 15 mm wire thickness 0.35 mm Product Description: for light brushing work such as deburring, cleaning and derusting - brush with plastic-coated brush body - very good corrosion resistance with optimum service life - INOX trim blue for use on all stainless steels (INOX), such as V4A - shaft Ø 6 mm Technical Data: - Drive type: Drill, flexible shaft drive, straight grinder - Application recommendation: For best performance, use a tool drive with at least 300 watts. Please observe the recommended speeds. - Machinable materials: Soft titanium alloys (tensile strength 500 N/mm²), cobalt-based alloys, aluminium, bronze, hard non-ferrous metals, high-temperature resistant materials, nickel-based alloys (e.g. Inconell and Hasteloy), other non-ferrous metals, stainless steel (INOX), titanium, titanium alloys, nickel or titanium-based superalloys. - Machining tasks: Removing oxide layers, paint stripping, removing tarnish, rust removal, deburring, cleaning, roughening - Trimming material: Stainless steel wire (INOX) - Ø shaft: 6mm - Ø cup: 16mm - RPM, opt., up to: 11700RPM - RPM, opt., from: 7200RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: The brush is degreased and leaves no oil residue on the workpiece. Optimum access to hard-to-reach areas such as drill holes and cavities by spreading the filament during rotation. The plastic coating prevents the risk of contact corrosion. Very good corrosion resistance. Produces fine surfaces. - Ø: 15 mm - Fill width: 0.35 mm - Wire length: 22 mm - Wire thickness: 0.35 mm - Total length: 65 mm - Max. speed: 18000 min-¹ - Material suitability INOX: very suitable - Material suitability aluminium: very suitable - Brand: PFERD - Material: Stainless steel - Shank Ø: 6 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€14,10
-
PFERD PFERD brush PBGS INOX ( 8000432691 ) Ø 10 mm wire thickness 0.5 mm 10000 min-¹
Scope of Delivery: - 1x PFERD brush Ø 10 mm wire thickness 0.5 mm Product Description: flexible single-knot brush with plastic-coated brush body - very good corrosion resistance with optimum service life - INOX trim blue for use on all stainless steels (INOX) - such as V4A. Stainless steel wire (INOX) withstands temperatures up to 450 °C - Shaft Ø 6 mm Technical Data: - Drive type: Straight grinder, drilling machine, flexible shaft drive - Application recommendation: For optimum results, use on variable-speed tool drives. For best performance, use a tool drive with at least 300 watts. Please observe the recommended speeds. - Machinable materials: Non-ferrous metal hard, stainless steel (INOX), titanium, titanium alloys, other non-ferrous metals, soft titanium alloys (tensile strength 500 N/mm²), high-temperature resistant materials, nickel or titanium-based superalloys, cobalt-based alloys, bronze, aluminium, nickel-based alloys (e.g. Inconell and Hasteloy) - Machining tasks: Rust removal, deburring, cleaning, weld seam processing, root seam processing, descaling, tarnish removal, oxide layer removal, fillet weld processing, paint stripping - Trimming material: Stainless steel wire (INOX) - Ø shank: 6mm - Ø cup: 10mm - RPM, opt., up to: 6500RPM - RPM, opt., from: 4000RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: The plastic coating prevents the risk of contact corrosion. Very good corrosion resistance. Optimum access to hard-to-reach areas such as inside corners, as the plait does not untwist. The brush is degreased and leaves no oil residue on the workpiece. - Ø: 10 mm - Fill width: 0.5 mm - Filament length: 25 mm - Wire thickness: 0.5 mm - Total length: 65 mm - Max. speed: 10000 min-¹ - Content: 10 pcs. - Material suitability INOX: very suitable - Material suitability aluminium: very suitable - Brand: PFERD - Material: Stainless steel - Shank Ø: 6 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
-
PFERD PFERD brush PBGS INOX ( 8000432689 ) Ø 10 mm wire thickness 0.2 mm 10000 min-¹
Tue, 09/16/2025
Scope of Delivery: - 1x PFERD brush Ø 10 mm wire thickness 0.2 mm Product Description: flexible single-knot brush with plastic-coated brush body - very good corrosion resistance with optimum service life - INOX trim blue for use on all stainless steels (INOX) - such as V4A. Stainless steel wire (INOX) withstands temperatures up to 450 °C - Shaft Ø 6 mm Technical Data: - Drive type: Straight grinder, drilling machine, flexible shaft drive - Application recommendation: Please observe the recommended speeds. For optimum results, use on variable speed tool drives. For best performance, use a tool drive with at least 300 watts. - Machinable materials: Nickel or titanium-based superalloys, aluminium, bronze, cobalt-based alloys, hard non-ferrous metals, nickel-based alloys (e.g. Inconell and Hasteloy), other non-ferrous metals, soft titanium alloys (tensile strength 500 N/mm²), stainless steel (INOX), titanium, titanium alloys, high-temperature materials - Machining tasks: Deburring, derusting, fillet weld processing, weld seam processing, root seam processing, paint stripping, removing oxide layers, descaling, cleaning, removing annealing colours - Trimming material: Stainless steel wire (INOX) - Ø shaft: 6mm - Ø cup: 10mm - RPM, opt., up to: 6500RPM - RPM, opt., from: 4000RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Very good corrosion resistance. The plastic coating prevents the risk of contact corrosion. Optimum access to hard-to-reach areas such as inside corners, as the plait does not untwist. The brush is degreased and leaves no oil residue on the workpiece. - Ø: 10 mm - Fill width: 0.2 mm - Filament length: 25 mm - Wire thickness: 0.2 mm - Total length: 65 mm - Max. speed: 10000 min-¹ - Content: 10 pcs. - Material suitability INOX: very suitable - Material suitability aluminium: very suitable - Brand: PFERD - Material: Stainless steel - Shank Ø: 6 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€16,10
-
PFERD PFERD brush PBG ST ( 8000432638 ) Ø 23 mm shaft wire thickness 0.5 mm 20000 min-¹
Tue, 09/16/2025
Scope of Delivery: - 1x PFERD brush Ø 23 mm shaft wire thickness 0.5 mm Product Description: Suitable for medium-duty brushing work such as deburring, cleaning, derusting and descaling as well as for removing weld spatter - Steel wire fill material has high tensile and flexural fatigue strength - Optimum wear of the wire as well as a long service life, even in extreme brushing applications. Steel wire can withstand temperatures of up to 300 °C. Shank Ø 6 mm Technical Data: - Drive type: Drill, straight grinder, flexible shaft drive - Application recommendation: Please observe the recommended speeds. To control the spread of the brush, use variable speed tool drives. For best performance, use a tool drive with at least 500 watts. - Machinable materials: Cast iron, steel, cast steel - Machining tasks: Removing oxide layers, descaling, root seam machining, deburring, weld seam machining, fillet weld machining, paint stripping, rust removal, cleaning - Trimming material: Steel wire (ST) - Ø shank: 6mm - Ø cup: 23mm - RPM, opt., up to: 15000RPM - RPM, opt., from: 10000RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Aggressive brushing effect due to high rigidity of the wire braids. Long service life thanks to the use of PFERD special wire. Optimum access to hard-to-reach areas such as recesses and drill holes. - Ø: 23 mm - Wire width: 0.5 mm - Fill length: 28 mm - Wire thickness: 0.5 mm - Number of plaits: 8 - Total length: 68 mm - Max. speed: 20000 min-¹ - Content: 10 pcs. - Holder: Shank - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material: Steel - Shank Ø: 6 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€23,90
-
PFERD PFERD brush PBG INOX ( 8000432651 ) Ø 23 mm wire thickness 0.25 mm 20000 min-¹
Tue, 09/16/2025
Scope of Delivery: - 1x PFERD brush Ø 23 mm wire thickness 0.25 mm Product Description: suitable for medium-duty brushing work such as deburring, cleaning, derusting and descaling as well as for removing weld spatter - with plastic-coated brush body - very good corrosion resistance with optimum service life - INOX trim blue for use on all stainless steels (INOX) - such as V4A stainless steel wire (INOX) withstands temperatures up to 450 °C - shaft Ø 6 mm Technical Data: - Drive type: Straight grinder, flexible shaft drive, drilling machine - Application recommendation: To control the spread of the brush, use variable-speed tool drives. For best performance, use a tool drive with at least 500 watts. Please observe the recommended speeds. - Machinable materials: Bronze, high-temperature materials, cobalt-based alloys, other non-ferrous metals, hard non-ferrous metals, aluminium, titanium alloys, titanium, stainless steel (INOX), soft titanium alloys (tensile strength 500 N/mm²), nickel or titanium-based superalloys, nickel-based alloys (e.g. Inconell and Hasteloy) - Machining tasks: Weld seam processing, descaling, paint stripping, fillet weld processing, root seam processing, tarnish removal, rust removal, deburring, cleaning, oxide layer removal - Trimming material: Stainless steel wire (INOX) - Ø shank: 6mm - Ø cup: 23mm - RPM, opt., up to: 13000RPM - RPM, opt., from: 8000RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Optimum access to hard-to-reach areas such as recesses and drill holes. The brush is degreased and leaves no oil residue on the workpiece. The plastic coating prevents the risk of contact corrosion. Aggressive brushing effect due to the high rigidity of the wire tufts. Very good corrosion resistance. - Ø: 23 mm - Fill length: 28 mm - Wire thickness: 0.25 mm - Number of plaits: 8 - Total length: 68 mm - Max. speed: 20000 min-¹ - Content: 10 pcs. - Material suitability INOX: very suitable - Material suitability aluminium: very suitable - Brand: PFERD - Material: Stainless steel - Shank Ø: 6 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€33,69
-
PFERD PFERD brush PBG ST ( 8000432634 ) Ø 19 mm shaft wire thickness 0.35 mm 20000 min-¹
Tue, 09/16/2025
Scope of Delivery: - 1x PFERD brush Ø 19 mm shaft wire thickness 0.35 mm Product Description: Suitable for medium-duty brushing work such as deburring, cleaning, derusting and descaling as well as for removing weld spatter - Steel wire fill material has high tensile and flexural fatigue strength - Optimum wear of the wire as well as a long service life, even in extreme brushing applications. Steel wire can withstand temperatures of up to 300 °C. Shank Ø 6 mm Technical Data: - Drive type: Flexible shaft drive, straight grinder, drill - Application recommendation: For best performance, use a tool drive with at least 500 watts. To control the spread of the brush, use variable speed tool drives. Please observe the recommended speeds. - Machinable materials: Steel, cast steel, cast iron - Machining tasks: Removing oxide layers, weld seam processing, cleaning, deburring, derusting, descaling, root seam processing, fillet weld processing, paint stripping - Trimming material: Steel wire (ST) - Ø shank: 6mm - Ø cup: 19mm - RPM, opt., up to: 15000RPM - RPM, opt., from: 10000RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Long service life thanks to the use of PFERD special wire. Aggressive brushing effect due to the high rigidity of the wire tufts. Optimum access to hard-to-reach areas such as recesses and drill holes. - Ø: 19 mm - Fill width: 0.35 mm - Filament length: 28 mm - Wire thickness: 0.35 mm - Number of plaits: 6 - Total length: 68 mm - Max. speed: 20000 min-¹ - Content: 10 pcs. - Holder: Shank - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material: Steel - Shank Ø: 6 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€23,23
-
PFERD PFERD brush PBG ST ( 8000432633 ) Ø 19 mm shaft wire thickness 0.25 mm 20000 min-¹
Tue, 09/16/2025
Scope of Delivery: - 1x PFERD brush Ø 19 mm shaft wire thickness 0.25 mm Product Description: Suitable for medium-duty brushing work such as deburring, cleaning, derusting and descaling as well as for removing weld spatter - Steel wire fill material has high tensile and flexural fatigue strength - Optimum wear of the wire as well as a long service life, even in extreme brushing applications. Steel wire can withstand temperatures of up to 300 °C. Shank Ø 6 mm Technical Data: - Drive type: Flexible shaft drive, drilling machine, straight grinder - Application recommendation: Please observe the recommended speeds. To control the spread of the brush, use variable speed tool drives. For best performance, use a tool drive with at least 500 watts. - Machinable materials: Steel, cast steel, cast iron - Machining tasks: Cleaning, descaling, removing oxide layers, paint stripping, root seam machining, weld seam machining, fillet weld machining, deburring, derusting - Trimming material: Steel wire (ST) - Ø shank: 6mm - Ø cup: 19mm - RPM, opt., up to: 15000RPM - RPM, opt., from: 10000RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Optimum access to hard-to-reach areas such as recesses and drill holes. Long service life thanks to the use of PFERD special wire. Aggressive brushing effect due to high rigidity of the wire tufts. - Ø: 19 mm - Fill width: 0.25 mm - Fill length: 28 mm - Wire thickness: 0.25 mm - Number of plaits: 6 - Total length: 68 mm - Max. speed: 20000 min-¹ - Content: 10 pcs. - Holder: Shank - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material: Steel - Shank Ø: 6 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€24,74
-
PFERD PFERD Pinselbürste PBG INOX ( 8000432647 ) Ø 19 mm Drahtstärke 0,25 mm 20000 min-¹
Tue, 09/16/2025
Scope of Delivery: Product Description: Technical Data: For commercial use, please observe the building regulations!
€32,45
-
PFERD PFERD brush PBG INOX ( 8000432648 ) Ø 19 mm wire thickness 0.35 mm 20000 min-¹
Scope of Delivery: - 1x PFERD brush Ø 19 mm wire thickness 0.35 mm Product Description: suitable for medium-duty brushing work such as deburring, cleaning, derusting and descaling as well as for removing weld spatter - with plastic-coated brush body - very good corrosion resistance with optimum service life - INOX trim blue for use on all stainless steels (INOX) - such as V4A stainless steel wire (INOX) withstands temperatures up to 450 °C - shaft Ø 6 mm Technical Data: - Drive type: Straight grinder, drill, flexible shaft drive - Application recommendation: To control the spread of the brush, use variable-speed tool drives. Please observe the recommended speeds. For best performance, use a tool drive with at least 500 watts. - Machinable materials: Bronze, other non-ferrous metals, stainless steel (INOX), soft titanium alloys (tensile strength 500 N/mm²), titanium, nickel or titanium-based superalloys, nickel-based alloys (e.g. Inconell and Hasteloy), high-temperature materials, cobalt-based alloys, aluminium, titanium alloys, non-ferrous metal hard - Machining tasks: Weld seam processing, root seam processing, deburring, derusting, descaling, removing tarnish, removing oxide layers, fillet weld processing, cleaning, paint stripping - Trimming material: Stainless steel wire (INOX) - Ø shaft: 6mm - Ø cup: 19mm - RPM, opt., up to: 13000RPM - RPM, opt., from: 8000RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Aggressive brushing effect due to high rigidity of the wire braids. Very good corrosion resistance. The plastic coating prevents the risk of contact corrosion. Optimum access to hard-to-reach areas such as recesses and drill holes. The brush is degreased and leaves no oil residue on the workpiece. - Ø: 19 mm - Filament length: 28 mm - Wire thickness: 0.35 mm - Number of tufts: 6 - Total length: 68 mm - Max. speed: 20000 min-¹ - Content: 10 pcs. - Material suitability INOX: very suitable - Material suitability aluminium: very suitable - Brand: PFERD - Material: Stainless steel - Shank Ø: 6 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
-
PFERD PFERD tapered brush KBU ST ( 8000431750 ) Ø 95 mm wire thickness 0.3 mm 12000 min-¹
Tue, 09/16/2025
Scope of Delivery: - 1x PFERD tapered brush Ø 95 mm wire thickness 0.3 mm Product Description: for medium-duty brushing work such as deburring, cleaning and derusting - steel wire has high tensile and flexural fatigue strength - optimum wear of the wire and a long service life, even in extreme brushing applications Steel wire can withstand temperatures of up to 300 °C. Shank Ø 6 mm Technical Data: - Drive type: Straight grinder, drill, flexible shaft drive - Application recommendation: For best performance, use a tool drive with at least 300 watts. Please observe the recommended speeds. - Machinable materials: Thermoplastics, thermosets, wood, elastomers, cast iron, steel, cast steel - Machining tasks: Roughening, paint stripping, removing oxide layers, rust removal, deburring, cleaning - Filament material: Steel wire (ST) - Width: 10mm - Ø shaft: 6mm - RPM, opt., up to: 9000RPM - RPM, opt., from: 6000RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Advantages: Produces fine surfaces. Optimum adaptation to the contour of the workpieces thanks to high flexibility. Optimum access to hard-to-reach areas such as inside edges, grooves and slots. Long tool life thanks to the use of PFERD special wire. - Ø: 95 mm - Fill width: 10 mm - Fill length: 25 mm - Wire thickness: 0.3 mm - Total length: 62 mm - Max. speed: 12000 min-¹ - Content: 10 pcs. - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material: Steel - Shank Ø: 6 mm - Material suitability wood: very suitablePlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
€19,84
-
PFERD PFERD tapered brush KBU ST ( 8000431749 ) Ø 80 mm wire thickness 0.3 mm 12000 min-¹
Tue, 09/16/2025
Scope of Delivery: - 1x PFERD tapered brush Ø 80 mm wire thickness 0.3 mm Product Description: for medium-duty brushing work such as deburring, cleaning and derusting - steel wire has high tensile and flexural fatigue strength - optimum wear of the wire and a long service life, even in extreme brushing applications Steel wire can withstand temperatures of up to 300 °C. Shank Ø 6 mm Technical Data: - Drive type: Straight grinder, flexible shaft drive, drill - Application recommendation: For best performance, use a tool drive with at least 300 watts. Please observe the recommended speeds. - Machinable materials: Thermosets, cast iron, elastomers, steel, cast steel, thermoplastics, wood - Machining tasks: Roughening, paint stripping, removing oxide layers, derusting, deburring, cleaning - Filament material: Steel wire (ST) - Width: 10mm - Ø shaft: 6mm - RPM, opt., up to: 9000RPM - RPM, opt., from: 6000RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Advantages: Produces fine surfaces. Optimum adaptation to the contour of the workpieces thanks to high flexibility. Long tool life thanks to the use of PFERD special wire. Optimum access to hard-to-reach areas such as inside edges, grooves and slots. - Ø: 80 mm - Fill width: 10 mm - Fill length: 20 mm - Wire thickness: 0.3 mm - Total length: 62 mm - Max. speed: 12000 min-¹ - Content: 10 pcs. - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material: Steel - Shank Ø: 6 mm - Material suitability wood: very suitablePlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
€16,79
-
PFERD PFERD tapered brush KBU INOX ( 8000431753 ) Ø 70 mm wire thickness 0.2 mm 15000 min-¹
Tue, 09/16/2025
Scope of Delivery: - 1x PFERD tapered brush Ø 70 mm wire thickness 0.2 mm Product Description: for medium-duty brushing work such as deburring, cleaning and derusting stainless steel (INOX) - INOX trim blue for use on all stainless steels (INOX) such as V4A. Stainless steel wire (INOX) can withstand temperatures up to 450 °C. Shank Ø 6 mm Technical Data: - Drive type: Drill, straight grinder, flexible shaft drive - Application recommendation: Please observe the recommended speeds. For best performance, use a tool drive with at least 300 watts. - Machinable materials: soft titanium alloys (tensile strength 500 N/mm²), bronze, cobalt-based alloys, hard non-ferrous metals, high-temperature materials, nickel-based alloys (e.g. Inconell and Hasteloy), titanium alloys, other non-ferrous metals, stainless steel (INOX), aluminium, nickel or titanium-based superalloys, titanium - Machining tasks: Cleaning, paint stripping, removing oxide layers, removing annealing colours, rust removal, deburring, roughening - Filament material: Stainless steel wire (INOX) - Width: 10mm - Ø shaft: 6mm - RPM, opt., up to: 9800RPM - RPM, opt., from: 6000RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Advantages: Produces fine surfaces. Optimum access to hard-to-reach areas such as inside edges, grooves and slots. Optimum adaptation to the contour of the workpieces thanks to high flexibility. The brush is degreased and leaves no oil residue on the workpiece. Very good corrosion resistance. - Ø: 70 mm - Fill width: 10 mm - Filament length: 15 mm - Wire thickness: 0.2 mm - Total length: 58 mm - Max. speed: 15000 min-¹ - Content: 10 pcs. - Material suitability INOX: very suitable - Material suitability aluminium: very suitable - Brand: PFERD - Material: Stainless steel - Shank Ø: 6 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€21,14
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"