Chisels & Accessories
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 2.2 mm ( 4000600135 )
Fri, 10/17/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 2.2 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.06mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
€12,29
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 5.8 mm ( 4000600476 )
Fri, 10/17/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 5.8 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.09mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€28,15
-
Ruko RUKO sheet metal peel drill set 3-14 / 5-20 / 16-30.5 mm ( 4000601698 )
Fri, 10/17/2025
Scope of Delivery: - Sheet metal peel drill set 3-14 / 5-20 / 16-30.5 mm Product Description: Shaft with 3 clamping surfaces - 1 tin of cutting paste 30 g - in impact-resistant and break-proof plastic case Technical Data: - Packaging: ABS plastic caseFor commercial use, please observe the building regulations!
€67,98
-
BOSS BOSS cutting die form B M4 x 0.5 mm ( 4114640044 )
Scope of Delivery: - Cutting die form B M4 x 0.5 mm Product Description: HSS - DIN EN 22568 - form B - with skiving cut - metric ISO fine pitch thread DIN 13 MF - tolerance zone 6g - for steels up to approx. 800 N/mm² strength - closed, pre-slotted form - up to M100x2 available from stock at short notice Technical Data: - Mould: B - Cutting material: HSS - Height: 5mmFor commercial use, please observe the building regulations!
-
TYROLIT TYROLIT diamond core bit Premium Ø 250 mm length 450 mm ( 4000845027 )
Scope of Delivery: - Diamond core bit Premium Ø 250 mm Length 450 mm Product Description: suitable for soft to medium-hard concrete aggregates - for drill motors up to 3 kW - laser-welded segments - for wet cutting Technical Data: - nanFor commercial use, please observe the building regulations!
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 6.8 mm ( 4000600191 )
Fri, 10/17/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 6.8 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.14 mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
€22,39
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 5.1 mm ( 4000600467 )
Fri, 10/17/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 5.1 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.08 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€23,41
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 6.8 mm ( 4000600488 )
Fri, 10/17/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 6.8 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.11 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€34,16
-
Makita Makita D-34182-10 Pointed chisel SDS Max 400 mm 10 pieces
Scope of Delivery: - 1x Makita D-34182-10 pointed chisel SDS Max 400 mm 10 pieces Product Description: The Makita D-34182 pointed chisel is the ideal companion for anyone who wants to carry out concrete work cost-effectively and efficiently. With a length of 400 mm and an SDS-MAX shaft, it is specially designed for use in conjunction with SDS-MAX rotary hammers. Whether for renovation work or professional use, the pointed chisel impresses with its high robustness and durability. Thanks to the SDS-MAX machine, even demanding concrete work can be mastered with ease. Technical Data: - Manufacturer: Makita - Manufacturer number: D-34182-10 - Length: 400 mm - Quantity: 10 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
-
Gedore GEDORE extension KB 3290 square drive 3/4 ″ ( 4000773671 )
Fri, 10/17/2025
Scope of Delivery: - Extension KB 3290 square drive 3/4 ″ Product Description: 20 mm (3/4 ″) square drive for power screwdriver bit to DIN 3121 - ISO 1174 - form F and H with pin hole and annular groove - special steel - manganese phosphated - for the toughest loads on electric and/or pneumatic impact wrenches Technical Data: - Material: special steel - suitable locking pin Ø x L: 4 x 35mm - matching circlip Ø: 36mmFor commercial use, please observe the building regulations!
€66,39
-
Gedore GEDORE Extension 3090 3/8 ″ Length 250 mm ( 4000773591 )
Fri, 10/17/2025
Scope of Delivery: - Extension 3090 3/8 ″ Length 250 mm Product Description: 10.0 mm (3/8") square drive with ball lock - chrome vanadium steel - chrome-plated - DIN 3123 / ISO 3316 Square drive to DIN 3120 / ISO 1174 Technical Data: - Surface: chrome-plated - Material: Vanadium steelFor commercial use, please observe the building regulations!
€24,44
-
Gedore GEDORE extension KB 3290 square drive 3/4 ″ ( 4000773670 )
Fri, 10/17/2025
Scope of Delivery: - Extension KB 3290 square drive 3/4 ″ Product Description: 20 mm (3/4 ″) square drive for power screwdriver bit to DIN 3121 - ISO 1174 - form F and H with pin hole and annular groove - special steel - manganese phosphated - for the toughest loads on electric and/or pneumatic impact wrenches Technical Data: - Material: special steel - suitable locking pin Ø x L: 4 x 35mm - matching circlip Ø: 36mmFor commercial use, please observe the building regulations!
€54,77
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"