Chisels & Accessories
-
Ruko RUKO Blechschälbohrer Bohrbereich 3 - 14 mm ( 4000601663 )
Lieferumfang:Blechschälbohrer Bohrbereich 3 - 14 mmProduktbeschreibung:Die tiefgeschliffene Spannut bietet absolute Laufruhe und hohe Schnittleistung. Der Konus erleichtert das Zurückziehen bei durchgebohrten Blechen. Technische Daten: Schneidenanzahl: 2 Schaft-Ø: 6mm Schneidstoff: HSS Gesamtlänge: 58mm
-
Ruko RUKO Blechschälbohrer Bohrbereich 4 - 20 mm ( 4000601673 )
Lieferumfang:Blechschälbohrer Bohrbereich 4 - 20 mmProduktbeschreibung:Die tiefgeschliffene Spannut bietet absolute Laufruhe und hohe Schnittleistung. Der Konus erleichtert das Zurückziehen bei durchgebohrten Blechen. Technische Daten: Schneidenanzahl: 2 Schaft-Ø: 8mm Schneidstoff: HSSE-Co 5 Gesamtlänge: 71mm
-
Ruko RUKO Blechschälbohrer Bohrbereich 5 - 31 mm ( 4000601670 )
Lieferumfang:Blechschälbohrer Bohrbereich 5 - 31 mmProduktbeschreibung:Die tiefgeschliffene Spannut bietet absolute Laufruhe und hohe Schnittleistung. Der Konus erleichtert das Zurückziehen bei durchgebohrten Blechen. Technische Daten: Schneidenanzahl: 2 Schaft-Ø: 9mm Schneidstoff: HSS Gesamtlänge: 103mm
-
Ruko RUKO Blechschälbohrer Bohrbereich 24 - 40 mm ( 4000601666 )
Lieferumfang:Blechschälbohrer Bohrbereich 24 - 40 mmProduktbeschreibung:Die tiefgeschliffene Spannut bietet absolute Laufruhe und hohe Schnittleistung. Der Konus erleichtert das Zurückziehen bei durchgebohrten Blechen. Technische Daten: Schneidenanzahl: 2 Schaft-Ø: 10mm Schneidstoff: HSS Gesamtlänge: 89mm
-
Ruko RUKO Blechschälbohrer Bohrbereich 16 - 30,5 mm ( 4000601665 )
Lieferumfang:Blechschälbohrer Bohrbereich 16 - 30,5 mmProduktbeschreibung:Die tiefgeschliffene Spannut bietet absolute Laufruhe und hohe Schnittleistung. Der Konus erleichtert das Zurückziehen bei durchgebohrten Blechen. Technische Daten: Schneidenanzahl: 2 Schaft-Ø: 9mm Schneidstoff: HSS Gesamtlänge: 76mm
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 3.4 mm ( 4000600150 )
Thu, 10/16/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 3.4 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.09mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
€12,90
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 4.1 mm ( 4000600158 )
Thu, 10/16/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 4.1 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.1 mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
€14,53
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 3.9 mm ( 4000600156 )
Thu, 10/16/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 3.9 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.1 mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
€13,78
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 3.8 mm ( 4000600155 )
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 3.8 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.1 mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
-
Ruko RUKO Spiralbohrer DIN 338 Typ N Nenn-Ø 3,6 mm ( 4000600152 )
Lieferumfang:Spiralbohrer DIN 338 Typ N Nenn-Ø 3,6 mmProduktbeschreibung:HSS · DIN 338 · Typ N · Spitzenwinkel 118 ° · rechtsschneidend · Kegelmantelanschliff, ab Ø 2,0 mm Kreuzanschliff nach DIN 1412 C · der komplett geschliffene Spiralbohrer verfügt über eine erhöhte Rundlaufgenauigkeit · für Stahl, Stahlguss legiert und unlegiert (bis 900 N/mm² Festigkeit), Grau-, Temper-, Sphäro- und Druckguss, Sintereisen, Neusilber, Graphit, kurzspanende Aluminiumlegierungen, Messing und Bronze · Leistungsstarker Spiralbohrer, geeignet für alle normalen Bohrarbeiten in allgemein gängigen Werkstoffen Weitere Größen auf Anfrage verfügbar.Technische Daten: Schneidrichtung: rechtsschneidend Vorschub in Stahl bis 800 N: 0,09mm/U Qualität: profilgeschliffen Nenn-Ø-Toleranz: h8
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 3.7 mm ( 4000600153 )
Thu, 10/16/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 3.7 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.09mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
€13,78
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 3.5 mm ( 4000600151 )
Thu, 10/16/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 3.5 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.09mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
€12,90
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"