Direkt ist günstiger für Dich!

Wusstest du, dass Preisvergleich-Plattformen und Suchmaschinen bei jedem Kauf fett mitverdienen? Über 20 % vom Preis gehen nur für Werbung drauf – und das zahlen am Ende alle mit. Wir sagen: Nein danke und möchten die Werbekosten lieber als Preisreduktion an Euch weitergeben!

Aus diesem Grund übermitteln wir nicht mehr unseren gesamten Bestand, die Bestpreis-Angebote und Deals an die großen Plattformen und können Dir so - neben den Geschenken, BROpoints und anderen Vorteilen - wesentlich bessere Preise geben, die Du ausschließlich bei uns findest. Deswegen lohnt es sich, ohne Umwege, direkt zu uns zu kommen.

Initiative für bessere Preise und mehr Fairness im Online-Handel.

Finde hier ALLE ANGEBOTE, für die wir derzeit den Online-Bestpreis haben.

Cut-off wheels

Show previous products

PFERD PFERD abrasive cap POLICAP ( 4000841977 ) D11xH25mm grit 150 black

Sun, 11/16/2025

Scope of Delivery: - 1x PFERD sanding cap D11xH25mm grit 150 Product Description: Aluminium oxide A - abrasive cloth coated with aluminium oxide - for use in tool and mould making - for finishing work in hard-to-reach areas - for universal use on steel materials (hardened, tempered, unhardened) - specially developed for special tasks and for corresponding repair work - also suitable for processing plastics, wood and filler in model making - supplied without rubber backing Technical Data: - Grit size: 150 - Shape: KEL round cone - max. speed: 20000 min-¹ - Material suitability aluminium: limited suitability - Material suitability cast iron: very suitable - Colour: black - Material suitability steel: very suitable - Brand: PFERD - Material: Aluminium oxide - Ø: 11 mm - Height: 25 mmPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€66,04
PFERD PFERD Handpad POLINOX ( 4144155350 ) L224xW154mm red-brown

Sun, 11/16/2025

Scope of Delivery: - 1x PFERD hand pad L224xW154mm Product Description: Suitable for ultra-fine sanding on small to large surfaces and contours as well as cleaning work on metals and paintwork using hand sanding - achieves matt and silk-matt surfaces - very open structure - optimum contour adaptation thanks to high flexibility - reaches hard-to-reach areas - can be used for wet and dry sanding Technical Data: - Colour: red-brown - Length: 224 mm - Width: 154 mm - Grade: medium - Grain size: 180 - Material suitability INOX: very suitable - Material suitability aluminium: very suitable - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material suitability paint: very suitable - Material suitability plastic: very well suitedFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€10,16
PFERD PFERD Handpad POLINOX ( 4144155345 ) L224xW154mm red-brown

Sun, 11/16/2025

Scope of Delivery: - 1x PFERD hand pad L224xW154mm Product Description: Suitable for ultra-fine sanding on small to large surfaces and contours as well as cleaning work on metals and paintwork using hand sanding - achieves matt and silk-matt surfaces - very open structure - optimum contour adaptation thanks to high flexibility - reaches hard-to-reach areas - can be used for wet and dry sanding Technical Data: - Colour: red-brown - Length: 224 mm - Width: 154 mm - Type: coarse - Grain size: 100 - Material suitability INOX: very suitable - Material suitability aluminium: very suitable - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material suitability paint: very suitable - Material suitability plastic: very well suitedFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€10,40
PFERD PFERD flap disc Z-COOL ( 4144150305 ) Ø30xH20mm grit size 80 shaft Ø 6 mm

Sun, 11/16/2025

Scope of Delivery: - 1x PFERD flap disc Ø30xH20mm grit size 80 Product Description: zirconium aluminium oxide - for machining stainless steels and high-temperature alloys - high grinding performance - no clogging of the flaps - for coarse grinding tasks with high cutting performance and cool grinding - abrasive additives in the coating achieve a significantly higher stock removal rate, prevent clogging and result in cooler grinding - shank Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Straight grinder, flexible shaft drive - Application recommendation: Increasing the cutting speed results in a slightly finer surface. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be processed, the coarser the surface (when using , An increase in the stock removal rate should be achieved by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. - Machinable materials: Titanium, copper, steels up to 1,200 N/mm² ( 54 HRC, hardened, tempered steels over 1,200 N/mm² (For commercial use, please observe the building regulations!).For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€12,03
PFERD PFERD flap disc ( 8000429784 ) Ø80xH30mm grit 120 shank Ø 6 mm

Sun, 11/16/2025

Scope of Delivery: - 1x PFERD flap disc Ø80xH30mm grit size 120 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Flexible shaft drive, straight grinder - Application recommendation: Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. An increase in stock removal rate should be achieved by using a coarser grit and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be processed, the coarser the surface (when using , Use a suitable grinding oil for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. - Machinable materials: Steels up to 1,200 N/mm² ( 54 HRC, stainless steel (INOX) - Machining tasks: Levelling, surface processing, structuring (matting, line matting and satin finishing), fine grinding in stages, weld seam processing, deburring - Width: 30mm - Note: PFERDERGONOMICS recommends flap discs in order to sustainably reduce the vibration and noise generated during use and to improve working comfort. - Length, shaft: 40mm - RPM, opt.: 4800RPM - Safety instructions: For safety reasons, the specified maximum permissible speed must never be exceeded. The contact pressure must be significantly reduced if the specified optimum speed is exceeded. Safety is only guaranteed if the clamping length is at least 15 mm and the specified maximum speed is not exceeded with open shank lengths. - Advantages: Consistently high material removal over the entire service life, as new, aggressive abrasive is constantly released. Optimum contour adaptation due to high flexibility. Can be used very close to edges and at angles thanks to the flat cast core design. - Grit size: 120 - Max. speed: 9500 min-¹ - Abrasive: Aluminium oxide A - Material suitability Aluminium: limited suitability - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material: Aluminium - Ø: 80 mm - Height: 30 mm - Material suitability plastic: limited suitabilityFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€15,02
PFERD PFERD flap disc ( 8000429748 ) Ø60xH30mm grit 40 shank Ø 6 mm

Sun, 11/16/2025

Scope of Delivery: - 1x PFERD flap disc Ø60xH30mm grit size 40 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Flexible shaft drive, straight grinder - Application recommendation: Use at a recommended cutting speed of 15-20 m/s for best performance. This achieves an ideal compromise between stock removal rate, surface quality, temperature load on the workpiece and tool wear. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be machined, the coarser the surface (when using , An increase in the stock removal rate should be achieved by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. - Machinable materials: Aluminium, malleable cast iron, brass, grey/spheroidal cast iron (GG/GJL, GGG/GJS), hardened, tempered steels over 1,200 N/mm² ( 54 HRC, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€13,07
PFERD PFERD flap disc ( 8000429699 ) Ø40xH20mm grit 240 shank Ø 6 mm

Sun, 11/16/2025

Scope of Delivery: - 1x PFERD flap disc Ø40xH20mm grit 240 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Flexible shaft drive, straight grinder - Application recommendation: Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. An increase in removal rate should be achieved by using a coarser grit and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. Use a suitable grinding oil for the material to significantly increase the service life and grinding performance of the tools. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be machined, the coarser the surface (when using - Machinable materials: Steel materials with a hardness > 54 HRC, aluminium, malleable cast iron, brass, cast steel, copper, grey/spheroidal cast iron (GG/GJL, GGG/GJS), stainless steel (INOX), steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€11,89
PFERD PFERD flap disc ( 8000429754 ) Ø60xH40mm grit size 80 shank Ø 6 mm

Sun, 11/16/2025

Scope of Delivery: - 1x PFERD flap disc Ø60xH40mm grit size 80 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Straight grinder, flexible shaft drive - Application recommendation: Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be machined, the coarser the surface (when using , An increase in the stock removal rate should be achieved by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. - Machinable materials: Grey/spheroidal cast iron (GG/GJL, GGG/GJS), aluminium, malleable cast iron, brass, hardened, tempered steels over 1,200 N/mm² ( 54 HRC, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€14,02
PFERD PFERD flap disc ( 8000429700 ) Ø40xH20mm grit 40 shank Ø 6 mm

Sun, 11/16/2025

Scope of Delivery: - 1x PFERD flap disc Ø40xH20mm grit size 40 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Flexible shaft drive, straight grinder - Application recommendation: Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. An increase in stock removal rate should be achieved by using a coarser grit and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be machined, the coarser the surface (when using , For best performance, use at a recommended cutting speed of 15-20 m/s). This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. Use a suitable grinding oil for the material to significantly increase the service life and grinding performance of the tools. - Machinable materials: Hardened, tempered steels over 1,200 N/mm² ( 54 HRC, malleable cast iron, aluminium, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!).For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€11,89
PFERD PFERD flap disc ( 8000429667 ) Ø25xH25mm grit 60 shank Ø 6 mm

Sun, 11/16/2025

Scope of Delivery: - 1x PFERD flap disc Ø25xH25mm grit size 60 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Straight grinder, flexible shaft drive - Application recommendation: Increasing the cutting speed results in a slightly finer surface. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be processed, the coarser the surface (when using , For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface quality, temperature load on the workpiece and tool wear. The stock removal rate should be increased by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. - Machinable materials: Malleable cast iron, brass, grey/spheroidal cast iron (GG/GJL, GGG/GJS), steels up to 1,200 N/mm² ( 54 HRC, copper, stainless steel (INOX), hardened, tempered steels over 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€11,32
PFERD PFERD flap disc POLIFAN A-COOL SG INOX+ALU ( 8000429954 ) Ø 125 mm grit size 80 flat

Sun, 11/16/2025

Scope of Delivery: - 1x PFERD flap disc Ø 125 mm grit size 80 flat Product Description: Aluminium oxide - for machining stainless steel (INOX) and aluminium - with active grinding coating - for grinding tasks to achieve a high surface quality with low heat load - particularly cool grinding on materials with poor thermal conductivity - bore 22.23 mm Ø Technical Data: - Bore: 22,23mm - Shape: flat - Ø: 125 mm - grit size: 80 - max. speed: 12200 min-¹ - Material suitability INOX: very suitable - Abrasive: Aluminium oxide - Material suitability aluminium: very suitable - Area of application: INOX/aluminium - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€70,02
PFERD PFERD flap disc ( 4000841610 ) Ø30xH10mm grit 60 shank Ø 6 mm

Sun, 11/16/2025

Scope of Delivery: - 1x PFERD flap disc Ø30xH10mm grit size 60 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Flexible shaft drive, straight grinder - Application recommendation: The stock removal rate should be increased by using a coarser grit and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be machined, the coarser the surface (when using , Reducing the contact pressure and the peripheral speed and adding grinding oil reduce tool wear and the temperature load on the workpiece. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. Use a suitable grinding oil for the material to significantly increase the service life and grinding performance of the tools. - Machinable materials: Steels up to 1,200 N/mm² ( 54 HRC, malleable cast iron, aluminium - Machining tasks: Weld seam processing, surface processing, structuring (matting, line matting and satin finishing), levelling, fine grinding in stages, deburring - Width: 10mm - Note: PFERDERGONOMICS recommends flap discs in order to sustainably reduce the vibration and noise generated during use and to improve working comfort. - Length, shaft: 40mm - RPM, opt.: 12000RPM - Safety instructions: For safety reasons, the specified maximum permissible speed must never be exceeded. The contact pressure must be significantly reduced if the specified optimum speed is exceeded. Safety is only guaranteed if the clamping length is at least 15 mm and the specified maximum speed is not exceeded with open shank lengths. - Advantages: Optimum contour adaptation due to high flexibility. Consistently high material removal rate over the entire service life, as new, aggressive abrasive is constantly released. Can be used very close to edges and at angles thanks to the flat cast core design. - grit size: 60 - Max. speed: 25400 min-¹ - Abrasive: Aluminium oxide A - Material suitability Aluminium: limited suitability - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material: Aluminium oxide - Ø: 30 mm - Height: 10 mm - Material suitability plastic: limited suitabilityPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€10,83