Cut-off wheels
-
PFERD PFERD grinding disc COMBIDISC ( 4000844542 ) Ø 38 mm grit size 80
Mon, 10/06/2025
Scope of Delivery: - 1x PFERD grinding disc Ø 38 mm grit size 80 Product Description: Aluminium oxide A - for universal use from coarse to fine sanding in industry and trade Technical Data: - Ø: 38 mm - grit size: 80 - Max. speed: 16000 min-¹ - Abrasive: Aluminium oxide - Material suitability Aluminium: very suitable - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Model: COMBIDISC - Material suitability plastic: very suitablePlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
€111,76
-
PFERD PFERD Schleifscheibe COMBIDISC ( 4000844541 ) Ø 38 mm Körnung 60
Lieferumfang:- 1x PFERD Schleifscheibe Ø 38 mm Körnung 60Produktbeschreibung:Korund A · für den universellen Einsatz von Grob- bis Feinschliff in Industrie und HandwerkTechnische Daten:- Ø: 38 mm- Körnung: 60 - max. Drehzahl: 16000 min-¹- Schleifmittel: Normalkorund - Werkstoffeignung Aluminium: sehr gut geeignet - Werkstoffeignung Guss: sehr gut geeignet - Werkstoffeignung Stahl: sehr gut geeignet - Marke: PFERD - Modell: COMBIDISC - Werkstoffeignung Kunststoff: sehr gut geeignetBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!
-
PFERD PFERD grinding disc CC-GRIND-ROBUST SGP STEELOX ( 8000793518 ) D125xSmm Bore 22.23 mm
Mon, 10/06/2025
Scope of Delivery: - 1x PFERD grinding disc D125xSmm Product Description: for steel and stainless steel (INOX) with high grinding efficiency and maximum service life - bore 22.23 mm Ø Technical Data: - Drive type: Angle grinder - Recommendation for use: Trim the CC-GRIND-ROBUST on sharp metal edges, files or with indexable inserts. Trimming may only be carried out at an angle of 45°. Select the CC-GRIND-ROBUST SGP STEELOX if the fastest possible work progress is required. For optimum performance, use with a flat angle of attack. Only use with the surface, not suitable for peripheral grinding. Apply the tool carefully and increase the pressure until a chip is created. Hold the pressure until the tool has been brought to the desired dimension. - Machinable materials: Steel, stainless steel (INOX) - Machining tasks: Weld seam processing, surface grinding, fine grinding in stages, deburring, chamfering - Mould: CC-GRIND-ROBUST - Note: PFERDERGONOMICS recommends CC-GRIND-ROBUST with VICTOGRAIN abrasive grain in order to sustainably reduce the vibration, noise and dust generated during use and to noticeably improve working comfort. PFERDEFFICIENCY recommends CC-GRIND-ROBUST with VICTOGRAIN abrasive grain for long, fatigue-free and resource-saving work with perfect results in the shortest possible time. - Ø bore: 22.23 mm - Abrasive: VICTOGRAIN - Advantages: The tool can be reset/trimmed without any problems. Ultimate aggressiveness for the fastest work progress. Glass fibre reinforced plastic backing plate guarantees equally robust and safe use. Much more ergonomic than a grinding disc: noise, vibrations and dust are significantly reduced. A significantly better surface finish is also achieved. Compared to flap discs, flat surfaces can be achieved thanks to the dimensional stability. Thanks to the customised geometry, the use of a special clamping flange set is not necessary. Although the VICTOGRAIN tools only have one abrasive grain layer, they offer an outstanding tool life - longer than roughing discs and many flap discs. Unlike fibre discs, the CC-GRIND-ROBUST does not deform even under extreme climatic conditions and is significantly more robust in rough use. - Ø: 125 mm - Max. speed: 12200 min-¹ - Material suitability INOX: very suitable - Bore: 22.23 mm - Material suitability steel: very suitable - Design: Steel / stainless steel - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€66,93
-
PFERD PFERD abrasive sleeve holder ( 8000433965 ) D19xH25mm Shank-Ø 6 mm
Mon, 10/06/2025
Scope of Delivery: - 1x PFERD abrasive sleeve carrier D19xH25mm Product Description: made of rubber - cylindrical shape - the slots facilitate the expansion of the body during sanding, which tensions the abrasive sleeve and increases elasticity - the belt is non-slip - the abrasive sleeves can be pulled on and off with a slight clockwise rotation Technical Data: - Drive type: Flexible shaft drive, straight grinder - Application recommendation: For best performance, use at a recommended cutting speed of 20-30 m/s. For a secure fit of the abrasive sleeve, maintain the minimum speed of the abrasive sleeve carrier. To make it easy to change the abrasive sleeves, turn them slightly clockwise to mount and remove them. Keep the abrasive sleeve carrier clamped in the tool drive. - Design: not specified - Width: 25mm - Hardness: 65-70 - Length, shaft: 35mm - PFERD type: GK - RPM, min.: 20000RPM - Safety instructions: The maximum permissible peripheral speed is 30 m/s. - Advantages: Secure fit of the abrasive sleeve on the abrasive sleeve carrier due to expansion of the carrier during use. Outstanding service life thanks to special manufacturing process - even under the toughest operating conditions. Maximum efficiency thanks to particularly high material removal and high abrasive aggressiveness. - Ø: 19 mm - Height: 25 mm - Shank Ø: 6 mm - Shape: Cylinder - Max. speed: 30000 min-¹ - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€22,56
-
PFERD PFERD POLICAP sanding cap carrier ( 4000842445 ) D5xH10mm
Mon, 10/06/2025
Scope of Delivery: - 1x PFERD sanding cap carrier D5xH10mm Product Description: made of rubber - for holding POLICAP abrasive caps Technical Data: - Shape: ZYA-cylindrical - Shank Ø: 3 mm - max. speed: 95000 min-¹ - Brand: PFERD - Ø: 5 mm - Height: 10 mmFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€14,19
-
PFERD PFERD abrasive sleeve holder ( 4200002013 ) D60xH30mm shank Ø 6 mm
Mon, 10/06/2025
Scope of Delivery: - 1x PFERD abrasive sleeve carrier D60xH30mm Product Description: made of rubber - cylindrical shape - the slots facilitate the expansion of the body during sanding, which tensions the abrasive sleeve and increases elasticity - the belt is non-slip - the abrasive sleeves can be pulled on and off with a slight clockwise rotation Technical Data: - Drive type: Straight grinder, flexible shaft drive - Application recommendation: For best performance, use at a recommended cutting speed of 20-30 m/s. For a secure fit of the abrasive sleeve, maintain the minimum speed of the abrasive sleeve carrier. To make it easy to change the abrasive sleeves, turn them slightly clockwise to mount and remove them. Keep the abrasive sleeve carrier clamped in the tool drive. - Design: not specified - Width: 30mm - Hardness: 65-70 - Length, shaft: 35mm - PFERD type: GK - RPM, min.: 6500RPM - Safety instructions: The maximum permissible peripheral speed is 30 m/s. - Advantages: Secure fit of the abrasive sleeve on the abrasive sleeve carrier due to expansion of the carrier during use. Outstanding service life thanks to special manufacturing process - even under the toughest operating conditions. Maximum efficiency thanks to particularly high material removal and high abrasive aggressiveness. - Ø: 60 mm - Height: 30 mm - Shank Ø: 6 mm - Shape: Cylinder - Max. speed: 9500 min-¹ - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€28,30
-
PFERD PFERD abrasive sleeve holder ( 4200002011 ) D30xH30mm shank Ø 6 mm
Mon, 10/06/2025
Scope of Delivery: - 1x PFERD abrasive sleeve carrier D30xH30mm Product Description: made of rubber - cylindrical shape - the slots facilitate the expansion of the body during sanding, which tensions the abrasive sleeve and increases elasticity - the belt is non-slip - the abrasive sleeves can be pulled on and off with a slight clockwise rotation Technical Data: - Drive type: Flexible shaft drive, straight grinder - Application recommendation: For easy replacement of the sanding sleeves, pull them on and off with a slight clockwise rotation. Keep the abrasive sleeve holder clamped in the tool drive. For best performance, use at a recommended cutting speed of 20-30 m/s. For a secure fit of the abrasive sleeve, maintain the minimum speed of the abrasive sleeve carrier. - Design: not specified - Width: 30 mm - Hardness: 65-70 - Length, shaft: 35mm - PFERD type: GK - RPM, min.: 13000RPM - Safety instructions: The maximum permissible peripheral speed is 30 m/s. - Advantages: Maximum efficiency due to particularly high material removal and high aggressiveness of the abrasive. Outstanding service life thanks to special manufacturing process - even under the toughest operating conditions. Secure fit of the abrasive sleeve on the abrasive sleeve carrier due to expansion of the carrier during use. - Ø: 30 mm - Height: 30 mm - Shank Ø: 6 mm - Shape: Cylinder - Max. speed: 19100 min-¹ - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€21,83
-
PFERD PFERD abrasive sleeve holder ( 4144200130 ) D10xH20mm Shank-Ø 6 mm
Mon, 10/06/2025
Scope of Delivery: - 1x PFERD abrasive sleeve carrier D10xH20mm Product Description: made of rubber - cylindrical shape - the slots facilitate the expansion of the body during sanding, which tensions the abrasive sleeve and increases elasticity - the belt is non-slip - the abrasive sleeves can be pulled on and off with a slight clockwise rotation Technical Data: - Drive type: Straight grinder, flexible shaft drive - Application recommendation: For easy replacement of the sanding sleeves, pull them on and off with a slight clockwise rotation. Keep the abrasive sleeve holder clamped in the tool drive. For a secure fit of the abrasive sleeve, maintain the minimum speed of the abrasive sleeve carrier. For best performance, use at a recommended cutting speed of 20-30 m/s. - Design: not specified - Width: 20mm - Hardness: 65-70 - Length, shaft: 35mm - PFERD type: GK - RPM, min.: 30000RPM - Safety instructions: The maximum permissible peripheral speed is 30 m/s. - Advantages: Maximum efficiency due to particularly high material removal and high aggressiveness of the abrasive. Outstanding service life thanks to special manufacturing process - even under the toughest operating conditions. Secure fit of the abrasive sleeve on the abrasive sleeve carrier due to expansion of the carrier during use. - Ø: 10 mm - Height: 20 mm - Shank Ø: 6 mm - Shape: Cylinder - Max. speed: 44000 min-¹ - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€21,83
-
PFERD PFERD abrasive sleeve holder ( 4144200132 ) D13xH25mm Shank-Ø 6 mm
Mon, 10/06/2025
Scope of Delivery: - 1x PFERD abrasive sleeve carrier D13xH25mm Product Description: made of rubber - cylindrical shape - the slots facilitate the expansion of the body during sanding, which tensions the abrasive sleeve and increases elasticity - the belt is non-slip - the abrasive sleeves can be pulled on and off with a slight clockwise rotation Technical Data: - Drive type: Straight grinder, flexible shaft drive - Application recommendation: For best performance, use at a recommended cutting speed of 20-30 m/s. For a secure fit of the abrasive sleeve, maintain the minimum speed of the abrasive sleeve carrier. To make it easy to change the abrasive sleeves, turn them slightly clockwise to mount and remove them. Keep the abrasive sleeve carrier clamped in the tool drive. - Design: not specified - Width: 25mm - Hardness: 65-70 - Length, shaft: 35mm - PFERD type: GK - RPM, min.: 30000RPM - Safety instructions: The maximum permissible peripheral speed is 30 m/s. - Advantages: Outstanding tool life thanks to special manufacturing process - even under the toughest operating conditions. Maximum efficiency due to particularly high material removal and high aggressiveness of the abrasive. Secure fit of the abrasive sleeve on the abrasive sleeve carrier due to expansion of the carrier during use. - Ø: 13 mm - Height: 25 mm - Shank Ø: 6 mm - Shape: Cylinder - Max. speed: 44000 min-¹ - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€21,83
-
PFERD PFERD Combination disc PSF DUODISC STEELOX ( 4000841379 ) D125xS1.9mmGrit 46 Bore 22.23 mm
Mon, 10/06/2025
Scope of Delivery: - 1x PFERD combination disc D125xS1.9mmgrain size 46 Product Description: for steel and stainless steel (INOX) with high cutting performance and good service life - for safe cutting and grinding with just one tool - it fulfils all the requirements of EN 12413 for cutting and grinding discs Technical Data: - Drive type: Angle grinder, cordless angle grinder - Machinable materials: Rolled skin, scale, steel, stainless steel (INOX) - Machining tasks: Gouging, deburring, surface grinding, weld seam processing, fillet weld processing, cutting - Width: 1.9 mm - Note: PFERDEFFICIENCY recommends DUODISC combination discs to reduce tool change and set-up times. - Abrasive: Aluminium oxide A - Advantages: Time saving due to fewer disc changes. Ideal for flush cutting. Can be used universally on steel and stainless steel (INOX). Problem solver for grinding tasks on scale. In contrast to cutting discs, can also be used with an open protective bonnet. Maximum safety, high cutting performance and high cutting quality thanks to innovative glass fibre reinforcement. Ideal for cordless angle grinders. Safe, standard-compliant solution for cutting and side grinding with just one tool. - Shape: offset - Ø: 125 mm - Disc thickness: 1.9 mm - Grit size: 46 - Material suitability INOX: very suitable - Bore: 22.23 mm - Material suitability steel: very suitable - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€33,82
-
PFERD PFERD flap disc COMBIDISC-Mini-POLIFAN ( 4000844753 ) Ø 50 mm grit size 120
Mon, 10/06/2025
Scope of Delivery: - 1x PFERD flap disc Ø 50 mm grit size 120 Product Description: Aluminium oxide A - flat design - tool for universal, coarse grinding tasks with high removal rate - ideal for grinding weld seams and hard-to-reach areas Technical Data: - Ø: 50 mm - grit size: 120 - max. speed: 19100 min-¹ - Material suitability INOX: limited suitability - Abrasive: Aluminium oxide A - Material suitability aluminium: very suitable - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Model: COMBIDISC - Material suitability plastic: very suitablePlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
€65,61
-
PFERD PFERD flap disc POLIFAN ( 8000146435 ) Ø 125 mm grit size 60 flat
Mon, 10/06/2025
Scope of Delivery: - 1x PFERD flap disc Ø 125 mm grit 60 flat Product Description: CO-COOL ceramic grit - for difficult-to-cut materials such as high-alloy and stainless steel, nickel-based or titanium alloys - bore 22.23 mm Ø Technical Data: - Bore: 22,23mm - Drive type: Angle grinder - Machinable materials: Rolled skin, nickel-based alloys (e.g. Inconell and Hasteloy), nickel or titanium-based superalloys, scale, stainless steel (INOX), steel, hard aluminium alloys - Note: PFERDERGONOMICS recommends POLIFAN flap discs to sustainably reduce the vibration, noise and dust generated during use and to noticeably improve working comfort. PFERDEFFICIENCY recommends POLIFAN flap discs for perfect results in the shortest possible time. - Advantages: Less heat input into the workpiece than with other flap discs. The self-sharpening ceramic grain ensures optimum results even on materials that are difficult to machine. - Shape: flat - Ø: 125 mm - grit size: 60 - Max. speed: 12200 min-¹ - Width: 17 mm - Material suitability INOX: very suitable - Abrasive: CO-COOL ceramic grit - Material suitability aluminium: very suitable - Application: Steel - Material suitability steel: very suitable - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€73,82
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"