Diagnostic Tools

Show previous products

• 

  BENNING BENNING CM P2 current clamp multimeter 0.01 A - 400 A AC/DC ( 4000828938 )

  Thu, 11/27/2025

  Scope of Delivery: - Current clamp multimeter CM P2 0.01 A - 400 A AC/DC - Supplied with batteries (2 x type AAA) and protective bag, for spare batteries see art. no. 4000 901 810 Product Description: illuminated 4-digit LCD display (4,200 dots) - highest resolution of 10 mA AC in the 40 A measuring range - integrated voltage sensor (NCV) signals phase voltages and cable breaks in lines without contact (optical/acoustic) - inrush current measurement (INRUSH) - low-pass filter (LPF) - automatic switch-off (APO after 15 min., can be deactivated) - battery undervoltage display - measured value memory (HOLD) - ZERO function - measuring category CAT III 600 V measuring ranges: direct current: 10 mA - 400 A, alternating current: 10 mA - 400 A Technical Data: - Width: 59mm - Length: 149mm - Pliers opening: 23mm - Height: 28mmNote on the disposal of batteries and rechargeable batteries - As we sell batteries and accumulators or devices containing batteries and accumulators, we are obliged under the Battery Act (BattG) to draw your attention to the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €157,05

• 

  BENNING BENNING CM P1 current clamp multimeter 0.01 A - 400 A AC ( 4000828937 )

  Thu, 11/27/2025

  Scope of Delivery: - Current clamp multimeter CM P1 0.01 A - 400 A AC - Supplied with batteries (2 x type AAA) and protective bag, for replacement batteries see art. no. 4000 901 810 Product Description: illuminated 4-digit LCD display (4,200 dots) - highest resolution of 10 mA AC in the 40 A measuring range - integrated voltage sensor (NCV) signals phase voltages and cable breaks in lines without contact (optical/acoustic) - inrush current measurement (INRUSH) - low-pass filter (LPF) - automatic switch-off (APO after 15 min., can be deactivated) - battery undervoltage display - measured value memory (HOLD) - measuring category CAT III 600 V measuring ranges: Alternating current: 10 mA - 400 A Technical Data: - Width: 59mm - Length: 149mm - Pliers opening: 23mm - Height: 28mmNote on the disposal of batteries and rechargeable batteries - As we sell batteries and accumulators or devices containing batteries and accumulators, we are obliged under the Battery Act (BattG) to draw your attention to the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €116,47

• 

  TESTBOY TESTBOY digital multimeter Testboy 313 0-600 V AC, 0-600 V DC ( 4000828931 )

  Thu, 11/27/2025

  Scope of Delivery: - Digital multimeter Testboy 313 0-600 V AC, 0-600 V DC - Supplied with battery (1 x type block battery), 2 test leads, 1 temperature probe and 1 case, for replacement battery see art. no. 4000 901 814 Product Description: DC and AC voltage up to 600 V - DC and AC current up to 10 A - Application errors excluded by automatic measuring range protection - Continuity test - Diode test - Resistance up to 20 MOhm - Capacitance up to 20 µF - Temperature measurement -20 to +1000 °C via temperature sensor - Frequency 0-20 kHz - Data hold function - Backlight - Overvoltage category: CAT III 600 V - Measuring range: AC voltage: 0 - 600 V DC voltage: 0 - 600 V AC current: 0 - 10 A DC current: 0 - 10 A Technical Data: - Width: 90mm - Length: 195mm - Height: 35mm - subject to testing: yesNote on the disposal of batteries and rechargeable batteries - As we sell batteries and accumulators or devices containing batteries and accumulators, we are obliged under the Battery Act (BattG) to inform you of the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €94,13

• 

  BENNING BENNING Multimeter MM 12 0.0001 V-1000 V AC/DC ( 4000828924 )

  Thu, 11/27/2025

  Scope of Delivery: - Multimeter MM 12 0.0001 V-1000 V AC/DC - Supplied with PC software, serial data cable with USB connection, rubber protective frame, magnetic hanger, bag, batteries (4x 1.5 V Mignon/ AA/ LR6), test leads, wire temperature sensor, calibration certificate Replacement battery see item no. 4000 901 811 Product Description: with 4-digit, illuminated LCD display (4,000/ 40.000 dots) with bar graph and logging function as well as Bluetooth® interface - DC/AC voltage (10 µV - 1000 V), DC/AC current (10 µA - 10 A), resistance (0.1 Ω - 40 MΩ), frequency (0.1 Hz - 100 kHz), capacitance (0.01 nF - 40 mF), temperature (-200 °C - +1200°C) - continuity test (30 Ω) (buzzer)/ diode test (2.0 V) - LOG data logger function (40.000 measured values, sampling rate: 1 s - 10 min.) - MEM memory function (1.000 measured values, automatic A-SAVE and manual storage SAVE) - Free PC software BENNING PC-Win MM 12: Measured value transmission in real time via serial data cable with USB connection to PC or laptop, sampling rate (measuring interval) adjustable from 1 s to 10 min, display of measured values via line diagram and tabular form with calculation of maximum/minimum and average value, storage of up to 100.000 measured values in MS EXCEL® format, download of the data logger LOG and the memory MEM - Bluetooth® Low Energy 4.0 interface and optical interface via USB connection - IOS and Android APP for online transmission and download of the data logger/memory - Download free APP "BENNING MM-CM Link"! View, save and share the measured values for further analysis. Monitor up to 5 digital multimeters simultaneously from a safe distance. Transmit measured values in real time via Bluetooth 4.0 to smartphone and tablet (IOS/ Android from 4.3). Download the LOG data logger and the MEM memory. Storage of measured values in CSV format. Display of measured values via line diagram and tabular form - AutoV function for automatic AC/DC voltage detection and low input impedance (LoZ) for suppressing capacitive/inductive interspersed voltages - Low-pass filter (high-frequency suppression HFR) for measurements on motor drives - Automatic/manual range selection, automatic switch-off, battery status display - measured value (HOLD), peak value memory (P-HOLD), relative measurement (REL), maximum/minimum/average value (MAX/ MIN/ AVG), level measurement (dB/dBm) - measurement category CAT IV 600 V, CAT III 1000 V Technical Data: - Width: 94mm - Length: 206mm - Height: 54mmNote on the disposal of batteries and rechargeable batteries - As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the Battery Act (BattG) to inform you of the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €585,87

• 

  BENNING BENNING AC/DC current clamp adapter CC 3 0.2 - 300 A ( 4000828918 )

  Thu, 11/27/2025

  Scope of Delivery: - AC/DC current clamp adapter CC 3 0.2 - 300 A - Delivery incl. battery (type block battery), AC/DC current clamp adapter, test leads, bag, spare battery see art. no. 4000 901 814 Product Description: for use with installation tester IT 130 (art. no. 4000 828 919) or digital multimeter with 4 mm measuring sockets DC/AC current 0.2 A - 300 A AC/DC output 1 mV/1 A incl. battery, test leads and bag Measuring category: CAT III 600 V Technical Data: - Pliers opening: max. 25mmNote on the disposal of batteries and rechargeable batteries - As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the German Battery Act (BattG) to inform you of the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €214,29

• 

  BENNING BENNING appliance tester ST 710 2500 test specimens/with tester/test lead ( 4000828883 )

  Thu, 11/27/2025

  Scope of Delivery: - Appliance tester ST 710 2500 test samples/with test device/test lead - Appliance tester ST 710, carrying case, test lead with tapping terminal, IEC connection lead, batteries (6 x type AA) - for replacement batteries see art. no. 4000 901 811 Optional accessories (not included in the scope of delivery) 300 test labels (see art. no. 4000 828 886)No. 4000 828 886) Measuring adapter CEE earthing contact plug in 16 A / 32 A (see item no. 4000 828 901 / 4000 828 902) Leakage current clamp BENNING CM 9-1 (see item no. 4000 828 949) Product Description: for safety testing of electrical appliances/work equipment, such as power tools, motorised appliances, lights, extension leads, household appliances in accordance with DIN VDE 0701/0702 DGUV Regulation 3 - simple operation via three buttons - the complete test can be carried out within 10 seconds independently of the mains - automatic test sequence for Class I, II (III) appliances - measurement of insulation resistance, protective conductor resistance, protective conductor and touch current according to the equivalent leakage current method - cable test incl. RPE and RISO - continuity and short-circuit test of the phase/neutral conductor - voltage at external protective contact socket (L-N, L-PE, N-PE) - three-phase test socket (L-N, L-PE, N-PE) RPE and RISO - continuity and short-circuit test of the phase/neutral conductor - voltage at external protective contact socket (L-N, L-PE, N-PE) - three-phase test objects can be tested via optional measuring adapter (measuring adapter is not included in the scope of delivery) - limit values preset in accordance with VDE standard Special product benefits: Graphic display, automatic test sequence with good/bad statement, battery capacity for 2500 test objects, free download of test protocols (Excel, PDF) at www.benning.de Technical Data: - Width: 115mm - Length: 270mm - Height: 55mmNote on the disposal of batteries and rechargeable batteries - As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the Battery Act (BattG) to inform you of the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €673,42

• 

  BENNING BENNING Multimeter MM 2 0.1 mV-750 V AC, 0.1 mV-1000 V DC ( 4000828865 )

  Thu, 11/27/2025

  Scope of Delivery: - Multimeter MM 2 0.1 mV-750 V AC, 0.1 mV-1000 V DC - Supplied with protective frame, battery (1 x type block battery), test leads and carrying case, for spare battery see art. no. 4000 901 814 Product Description: with 3½-digit LCD display (2000 dots) - with polarity and battery undervoltage display - automatic switch-off - continuity and diode test - CAT III 600 V measuring ranges: DC voltage: 0.1 mV - 1000 V, AC voltage: 0.1 mV - 750 V, DC current: 0.1 µA - 20 A, AC current: 0.1 µA - 20 A, resistance: 0.1 Ω - 20 MΩ Technical Data: - Width: 95mm - Length: 192mm - Height: 50mmNote on the disposal of batteries and rechargeable batteries - As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the Battery Act (BattG) to inform you of the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €173,15

• 

  BENNING BENNING Multimeter MM P3 0.1 mV-600 V AC/DC ( 4000828857 )

  Thu, 11/27/2025

  Scope of Delivery: - Multimeter MM P3 0.1 mV-600 V AC/DC - Supplied with batteries (2 button cells LR44), protective case, permanently connected 2 mm test leads, replacement batteries see art. no. 4000 901 744 Product Description: pocket-sized - with 3 1/2-digit LC display (4000 dots) - integrated measured value memory - 130 g light - automatic or manual measuring range selection - battery undervoltage indicator - continuity and diode test - CAT III 300 V, CAT II 600 V measuring ranges: DC voltage: 100 µV - 600 V, AC voltage: 100 µV - 600 V, resistance: 0.1 Ω - 40 MΩ, capacitance: 10 pF - 100 µF, frequency: 0.001 Hz - 5 MHz Technical Data: - Width: 86mm - Length: 132mm - Height: 19mmNote on the disposal of batteries and rechargeable batteries - As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the Battery Act (BattG) to inform you of the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €90,17

• 

  HDT HDT Multimeter HDT 60 2-600 V AC/DC ( 4000828832 )

  Thu, 11/27/2025

  Scope of Delivery: - Multimeter HDT 60 2-600 V AC/DC - Delivery incl. battery (1 x type block battery) and test leads, spare battery see art. no. 4000 901 814 Product Description: with 3½-digit LCD display - for measuring voltage, current and resistance Measuring ranges: Voltage AC/DC: 2 V...600 V / 1 mV Tolerance: ± (1.5 % +5 rdg) / ± (0.8 % + 3 rdg) Current AC/DC: 200 mA, 10 A / 0.1, 10 mA Tolerance: ± (1.5 % + 5 rdg) Resistance: 2 k...2 MOhm Power supply: Battery: 9 V IEC 6LR61 Standards: DIN VDE 0411, EN 61010, IEC 61010, CAT III / 600 V Technical Data: - Width: 72mm - Length: 145mm - Height: 40mm - subject to testing: yesNote on the disposal of batteries and rechargeable batteries - As we sell batteries and accumulators or devices containing batteries and accumulators, we are obliged under the Battery Act (BattG) to inform you of the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €57,28

• 

  TESTBOY TESTBOY cable finder set Testboy 26 for locating/assigning cores ( 4000828930 )

  Thu, 11/27/2025

  Scope of Delivery: - Testboy 26 cable finder set for locating/matching wires - Supplied with battery (1 x type block battery), 1 transmitter, 1 receiver, 1 adapter set (coax, F and RJ11 adapters) and carrying case, for spare battery see art. no. 4000 901 814 Product Description: with LED torch function - acoustic display - simplifies the location of cables in the wall and in cable ducts as well as the assignment of cable pairs and cores - infinitely variable volume setting - maximum cable length 8000 m (unloaded) - detection of cable breaks - alternating or pulsating tone selectable Technical Data: - Version: integrated LED light - Indication: acoustic - Requires testing: yesNote on the disposal of batteries and rechargeable batteries - As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the German Battery Act (BattG) to inform you of the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €200,97

• 

  BENNING BENNING Multimeter MM 2-3 0.1 mV-1000 V AC, 0.1 mV-1000 V DC ( 4000828965 )

  Thu, 11/27/2025

  Scope of Delivery: - Multimeter MM 2-3 0.1 mV-1000 V AC, 0.1 mV-1000 V DC - Supplied with ergonomic housing with integrated rubber protection frame, bag, silicone measuring lead set (red/black, length: 1 m) with gold-plated 2 mm measuring tip and screw-on 4 mm lamellar measuring tip, wire temperature sensor, batteries (2 x type AAA) - for replacement batteries, see item no. 4000 901 810 - Product Description: 4-digit, illuminated LCD display (6.000 dots) - socket check (optical/acoustic, A range) with warning in case of incorrect measuring range selection - voltage sensor for non-contact and single-pole phase and cable break test (optical/acoustic) - automatic/manual range selection, switch-off, battery status display - measured value (HOLD), maximum/minimum/average value memory (MAX/ MIN/ AVG), relative measurement (REL) - measuring category CAT IV 300 V, CAT III 600 V, CAT III 1000 V measuring ranges: DC/AC voltage (10 µV - 1000 V), DC/AC current (1 mA - 10 A), resistance (0.1 Ω - 60 MΩ), frequency (10 Hz - 50 kHz), capacitance (0.01 nF - 10 mF), temperature (-40 °C - 400 °C) - optical and acoustic continuity ( Technical Data: - Width: 50mm - Length: 161mm - Height: 80mmNote on the disposal of batteries and rechargeable batteries - As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the Battery Act (BattG) to inform you of the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €184,49

• 

  BENNING BENNING Multimeter MM 2-2 0.1 mV-1000 V AC, 0.1 mV-1000 V DC ( 4000828964 )

  Thu, 11/27/2025

  Scope of Delivery: - Multimeter MM 2-2 0.1 mV-1000 V AC, 0.1 mV-1000 V DC - Supplied with ergonomic housing with integrated rubber protective frame, bag, high-quality silicone measuring lead set (red/black, length: 1 m) with gold-plated 2 mm measuring tip and screw-on 4 mm lamellar measuring tip, batteries (2 x type AAA) - for replacement batteries, see item no. 4000 901 810 Product Description: 4-digit, illuminated LCD display (6.000 dots) Socket control (optical/acoustic, A range) with warning in case of incorrect measuring range selection - Voltage sensor for non-contact and single-pole phase and cable break test (optical/acoustic) - Automatic/manual range selection, switch-off, battery status display - Measured value (HOLD), maximum/minimum/average value memory (MAX/ MIN/ AVG), relative measurement (REL) - Measuring category CAT IV 300 V, CAT III 600 V Measuring ranges: DC/AC voltage (10 µV - 1000 V), DC/AC current (1 mA - 10 A), resistance (0.1 Ω - 60 MΩ), frequency (10 Hz - 50 kHz), capacitance (0.01 nF - 10 mF) - optical and acoustic continuity ( Technical Data: - Width: 50mm - Length: 161mm - Height: 80mmNote on the disposal of batteries and rechargeable batteries - As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the Battery Act (BattG) to inform you of the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €161,03

Show more products