Drill Bit Sets

Show previous products

• 

  Ruko RUKO twist drill DIN 338 type N nominal Ø 2.9 mm ( 4000600144 )

  Fri, 12/05/2025

  Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 2.9 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.07mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €12,29

• 

  Ruko RUKO twist drill DIN 338 type N nominal Ø 19 mm HSS-Co5 ( 4000600111 )

  Fri, 12/05/2025

  Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 19 mm HSS-Co5 Product Description: HSS-Co5 - DIN 338 - type N - point angle 130 ° - profile ground - right-hand cutting - cross cut to DIN 1412 C - with stepped shank - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, tempered and case-hardened steels as well as stainless and acid-resistant steels - ideal for drilling larger drill diameters for all standard drills with a chuck up to 13.0 mm Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.14 mm/rev - Quality: profile ground - Shank length: 35mmFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €39,36

• 

  Ruko RUKO twist drill DIN 338 type N nominal Ø 11.5 mm ( 4000600244 )

  Fri, 12/05/2025

  Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 11.5 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.2 mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €28,74

• 

  Ruko RUKO twist drill DIN 338 type N nominal Ø 10.5 mm ( 4000600234 )

  Fri, 12/05/2025

  Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 10.5 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.2 mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €24,56

• 

  HELLER HELLER hammer drill Trijet Ultimate diameter20xworkingL400xL450mm ( 8000869719 )

  Fri, 12/05/2025

  Scope of Delivery: - 1x HELLER hammer drill Trijet Ultimate diameter20xworkingL400xL450mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Shank shape: cylindrical - Cutting direction: right - Cutting material: carbide - Angle of the tip: 140°For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €69,25

• 

  HELLER HELLER hammer drill Trijet Ø 16 mm working l.400 mm l.450 mm ( 8000656707 )

  Fri, 12/05/2025

  Scope of Delivery: - 1x HELLER hammer drill Trijet Ø 16 mm working length 400 mm length 450 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €59,68

• 

  HELLER HELLER hammer drill Trijet Ultimate D.16,0mm Working-L.150mm L.200mm ( 4300000181 )

  Fri, 12/05/2025

  Scope of Delivery: - 1x HELLER hammer drill Trijet Ultimate D.16,0mm Working-L.150mm L.200mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €37,57

• 

  HELLER HELLER hammer drill Trijet Ultimate D.12,0mm Working-L.100mm L.160mm ( 4300000175 )

  Fri, 12/05/2025

  Scope of Delivery: - 1x HELLER hammer drill Trijet Ultimate D.12,0mm Working-L.100mm L.160mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €19,84

• 

  HELLER HELLER hammer drill ENDURO D.20,0mm Working-L.200mm L.320mm ( 4000864892 )

  Fri, 12/05/2025

  Scope of Delivery: - 1x HELLER hammer drill ENDURO D.20,0mm Working-L.200mm L.320mm Product Description: guarantees maximum effectiveness, robustness and speed in concrete and reinforcement - double centring tip for simple, precise drilling and at the same time ensures powerful drilling progress thanks to its solid, embedded carbide head - improved drill dust transport thanks to new helix design and optimised drill dust grooves in the head - vibration-optimised helix - no snagging on reinforcement thanks to backward-curved cutting edges - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) - areas of application: Concrete, reinforced concrete, stone, sand-lime brick, masonry, marble and clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 18mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 160° - Areas of application: Concrete, reinforced concrete, stone, sand-lime brick, masonry, marble and clinkerFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €72,42

• 

  HELLER HELLER Hammerbohrer Bionic Pro Ø 10,0 mm Arbeits-L.400 mm L.460 mm ( 4000864773 )

  Fri, 12/05/2025

  Lieferumfang:1x HELLER Hammerbohrer Bionic Pro Ø 10,0 mm Arbeits-L.400 mm L.460 mmProduktbeschreibung: SDS-plus Zweischneider · der patentierte Hartmetall Bohrkopf sorgt für hohe Standzeiten und für besonders schnellen Bohrfortschritt - selbst in Armierung · zertifiziert durch die Prüfgemeinschaft Mauerbohrer (PGM) nach Anforderungen des Deutschen Instituts für Bautechnik (DIBt) Anwendungsbereiche: Beton, Betonarmierung, Mauerwerk, Naturstein, Kalksandstein, Fliesen, Marmor, Klinker

  Read more less

  1 - 2 business days

  €18,46

• 

  Bosch BOSCH Hammerbohrer Expert SDS-7X Ø 10,0 mm Arbeits-L.50 mm L.115 mm ( 4000909941 )

  302 Reviews

  Fri, 12/05/2025

  Lieferumfang:1x BOSCH Hammerbohrer Expert SDS-7X Ø 10,0 mm Arbeits-L.50 mm L.115 mmProduktbeschreibung: langlebiges Bohren von Stahlbeton · mit Carbide Technology · dringt effektiv durch die Armierung · passend für alle SDS plus Bohrhämmer

  Read more less

  1 - 2 business days

  €15,50

• 

  Alpen ALPEN Hammerbohrer Force X Ø 6,0 mm Arbeits-L.50 mm L.110 mm ( 4000864635 )

  Fri, 12/05/2025

  Lieferumfang:1x ALPEN Hammerbohrer Force X Ø 6,0 mm Arbeits-L.50 mm L.110 mmProduktbeschreibung: SDS-plus · 4 Vollhartmetall-Schneiden und neuem progressiven Spiralendesign · problemloses Durchbohren von Eisenarmierungen · vibrationsarmer Lauf und schnelle Bohrmehlförderung · Besonderer Produktvorteil: Dübellängenindikator

  Read more less

  1 - 2 business days

  €11,81

Show more products