Drill Bit Sets
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 4.3 mm ( 4000600458 )
Mon, 10/06/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 4.3 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.08 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€21,69
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 4.8 mm ( 4000600464 )
Mon, 10/06/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 4.8 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.08 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€22,27
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 4.1 mm ( 4000600455 )
Mon, 10/06/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 4.1 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.08 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€20,41
-
Ruko RUKO Spiralbohrer DIN 338 Typ INOX Nenn-Ø 3,9 mm ( 4000600453 )
Lieferumfang:Spiralbohrer DIN 338 Typ INOX Nenn-Ø 3,9 mmProduktbeschreibung:HSS-Co5 · DIN 338 · Typ INOX · Spitzenwinkel 130 ° · rechtsschneidend · Kegelmantelanschliff, ab Ø 2,0 mm Kreuzanschliff nach DIN 1412 C · der komplett geschliffene Spiralbohrer verfügt über eine erhöhte Rundlaufgenauigkeit · für unlegierte und legierte Stähle (bis 1100 N/mm² Festigkeit), Warm- und Kaltarbeitsstähle, Vergütungs- und Einsatzstähle sowie für rost- und säurebeständige Stähle · Leistungsstarker Spiralbohrer, geeignet für alle normalen Bohrarbeiten in allgemein gängigen Werkstoffen Weitere Größen auf Anfrage verfügbar.Technische Daten: Schneidrichtung: rechtsschneidend Vorschub in Stahl bis 800 N: 0,08mm/U Qualität: profilgeschliffen
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 3.1 mm ( 4000600443 )
Mon, 10/06/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 3.1 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.06 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€17,80
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 2.7 mm ( 4000600438 )
Mon, 10/06/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 2.7 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.05 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€17,63
-
Ruko RUKO Spiralbohrer DIN 338 Typ INOX Nenn-Ø 14 mm ( 4000600535 )
Lieferumfang:Spiralbohrer DIN 338 Typ INOX Nenn-Ø 14 mmProduktbeschreibung:HSS-Co5 · DIN 338 · Typ INOX · Spitzenwinkel 130 ° · rechtsschneidend · Kegelmantelanschliff, ab Ø 2,0 mm Kreuzanschliff nach DIN 1412 C · der komplett geschliffene Spiralbohrer verfügt über eine erhöhte Rundlaufgenauigkeit · für unlegierte und legierte Stähle (bis 1100 N/mm² Festigkeit), Warm- und Kaltarbeitsstähle, Vergütungs- und Einsatzstähle sowie für rost- und säurebeständige Stähle · Leistungsstarker Spiralbohrer, geeignet für alle normalen Bohrarbeiten in allgemein gängigen Werkstoffen Weitere Größen auf Anfrage verfügbar.Technische Daten: Schneidrichtung: rechtsschneidend Vorschub in Stahl bis 800 N: 0,18mm/U Qualität: profilgeschliffen
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 1 mm ( 4000600418 )
Mon, 10/06/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 1 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.01mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€18,64
-
Ruko RUKO Mehrfasenstufenbohrer DIN 8376 Typ N M6 ( 4000601857 )
Lieferumfang:Mehrfasenstufenbohrer DIN 8376 Typ N M6Produktbeschreibung:HSS · DIN 8376 · Typ N · Spitzenwinkel 118 ° · Senkwinkel 180 ° · Kegelmantelanschliff · lang · Bohrung und Senkung wird in einem Arbeitsgang gefertigt · Gütegrad mittel für Durchgangsloch · rechtsschneidend · zur rationellen Erstellung von Durchgangsbohrungen und Schraubenkopfsenkungen mit 180 ° Hinweis: Die Schnittgeschwindigkeit richtet sich nach dem großen Durchmesser, der Vorschub dagegen nach dem kleinenTechnische Daten: Vorschub in Stahl bis 800 N: 0,07mm/U Spitzenwinkel: 118° Typ: N Ausführung: mittel Senkwinkel: 180° Spannutlänge: 94mm
-
Ruko RUKO Mehrfasenstufenbohrer DIN 8374 Typ N M10 ( 4000601853 )
Lieferumfang:Mehrfasenstufenbohrer DIN 8374 Typ N M10Produktbeschreibung:HSS · DIN 8374 · Typ N · Spitzenwinkel 118 ° · Senkwinkel 90 ° · Kegelmantelanschliff · lang · Bohrung und Senkung wird in einem Arbeitsgang gefertigt · Gütegrad fein für Durchgangsloch · rechtsschneidend · zur rationellen Erstellung von Durchgangsbohrungen und Schraubenkopfsenkungen mit 90 ° Hinweis: Die Schnittgeschwindigkeit richtet sich nach dem großen Durchmesser, der Vorschub dagegen nach dem kleinenTechnische Daten: Vorschub in Stahl bis 800 N: 0,1mm/U Spitzenwinkel: 118° Typ: N Ausführung: fein Senkwinkel: 90° Spannutlänge: 135mm
-
Ruko RUKO machine tap DIN 376C M20x2.5 mm ( 4000602009 )
Mon, 10/06/2025
Scope of Delivery: - Machine tap DIN 376C M20x2.5 mm Product Description: HSS-Co5 - form C - with right-hand twist 35° - back-ground flanks - metric ISO thread - DIN 13 sheet 1 - tolerance zone ISO2 (6H) - for blind hole threads - for unalloyed and alloyed steels up to 1000 N/mm² strength, malleable cast iron and non-ferrous metals Technical Data: - Cutting direction: right-hand cutting - Shank Ø: 16mmFor commercial use, please observe the building regulations!
€40,05
-
Ruko RUKO machine tap DIN 376C M16x2 mm ( 4000602007 )
Mon, 10/06/2025
Scope of Delivery: - Machine tap DIN 376C M16x2 mm Product Description: HSS-Co5 - form C - with right-hand twist 35° - back-ground flanks - metric ISO thread - DIN 13 sheet 1 - tolerance zone ISO2 (6H) - for blind hole threads - for unalloyed and alloyed steels up to 1000 N/mm² strength, malleable cast iron and non-ferrous metals Technical Data: - Cutting direction: right-hand cutting - Shank Ø: 12mmFor commercial use, please observe the building regulations!
€26,81
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"