Drill Bits
-
Ruko RUKO twist drill DIN 345 type N nominal Ø 24 mm ( 4000601325 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 345 type N nominal Ø 24 mm Product Description: HSS-Co5 - DIN 345 - type N - point angle 118 ° - right-hand cutting - pointed cross cutting edge to DIN 1412 A - high-performance standard drill bit made from cobalt-alloyed HSS with higher heat resistance - ideal for drilling difficult-to-machine materials and for heavy-duty use - areas of application: for alloyed and unalloyed steel and cast steel (up to 1100 N/mm² strength), grey cast iron, malleable cast iron, high-chromium alloyed steels such as V2A and V4A, stainless and acid-resistant steels Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.15 mm/rev - Shank size: MK3 - Quality: profile groundFor commercial use, please observe the building regulations!
€56,93
-
Ruko RUKO twist drill DIN 345 type N nominal Ø 11.5 mm ( 4000601300 )
Scope of Delivery: - Twist drill DIN 345 type N nominal Ø 11.5 mm Product Description: HSS-Co5 - DIN 345 - type N - point angle 118 ° - right-hand cutting - pointed cross cutting edge to DIN 1412 A - high-performance standard drill bit made from cobalt-alloyed HSS with higher heat resistance - ideal for drilling difficult-to-machine materials and for heavy-duty use - areas of application: for alloyed and unalloyed steel and cast steel (up to 1100 N/mm² strength), grey cast iron, malleable cast iron, high-chromium alloyed steels such as V2A and V4A, stainless and acid-resistant steels Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.15 mm/rev - Shank size: MK1 - Quality: profile groundFor commercial use, please observe the building regulations!
-
Ruko RUKO twist drill DIN 345 type N nominal Ø 11 mm ( 4000601299 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 345 type N nominal Ø 11 mm Product Description: HSS-Co5 - DIN 345 - type N - point angle 118 ° - right-hand cutting - pointed cross cutting edge to DIN 1412 A - high-performance standard drill bit made from cobalt-alloyed HSS with higher heat resistance - ideal for drilling difficult-to-machine materials and for heavy-duty use - areas of application: for alloyed and unalloyed steel and cast steel (up to 1100 N/mm² strength), grey cast iron, malleable cast iron, high-chromium alloyed steels such as V2A and V4A, stainless and acid-resistant steels Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.15 mm/rev - Shank size: MK1 - Quality: profile groundFor commercial use, please observe the building regulations!
€21,49
-
Ruko RUKO twist drill DIN 340 type N nominal Ø 13 mm ( 4000601015 )
Scope of Delivery: - Twist drill DIN 340 type N nominal Ø 13 mm Product Description: HSS - DIN 340 - type N - point angle 118 ° - profile ground - taper ground - with straight shank - right-hand cutting - high-performance twist drill with increased concentricity in long design - suitable for deep drilling work in common materials - high fracture resistance - low feed rates and more frequent chip evacuation are required for deep hole drilling - for alloyed and unalloyed steel and cast steel (up to approx. 900 N/mm² strength), grey cast iron, malleable cast iron, ductile cast iron, die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, bronze and brass Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.2 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
-
Ruko RUKO Spiralbohrer DIN 340 Typ N Nenn-Ø 10,5 mm ( 4000601010 )
Lieferumfang:Spiralbohrer DIN 340 Typ N Nenn-Ø 10,5 mmProduktbeschreibung:HSS · DIN 340 · Typ N · Spitzenwinkel 118 ° · profilgeschliffen · Kegelmantelanschliff · mit Zylinderschaft · rechtsschneidend · leistungsstarker Spiralbohrer mit erhöhter Rundlaufgenauigkeit in langer Ausführung · geeignet für tiefe Bohrarbeiten in allgemein gängigen Werkstoffen · hohe Bruchsicherheit · bei Tieflochbohrungen sind kleine Vorschübe und häufigere Spanentleerungen notwendig · für Stahl und Stahlguss legiert und unlegiert (bis ca. 900 N/mm² Festigkeit), Grauguss, Temperguss, Sphäroguss, Druckguss, Sintereisen, Neusilber, Graphit, kurzspanende Aluminiumlegierungen, Bronze und Messing Technische Daten: Schneidrichtung: rechtsschneidend Vorschub in Stahl bis 800 N: 0,2mm/U Qualität: profilgeschliffen
-
Ruko RUKO twist drill DIN 340 type N nominal Ø 9 mm ( 4000600999 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 340 type N nominal Ø 9 mm Product Description: HSS - DIN 340 - type N - point angle 118 ° - profile ground - taper ground - with straight shank - right-hand cutting - high-performance twist drill with increased concentricity in long design - suitable for deep drilling work in common materials - high fracture resistance - low feed rates and more frequent chip evacuation are required for deep-hole drilling - for alloyed and unalloyed steel and cast steel (up to approx. 900 N/mm² strength), grey cast iron, malleable cast iron, ductile cast iron, die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, bronze and brass Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.18 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€47,98
-
Ruko RUKO twist drill DIN 340 type N nominal Ø 8 mm ( 4000600989 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 340 type N nominal Ø 8 mm Product Description: HSS - DIN 340 - type N - point angle 118 ° - profile ground - taper ground - with straight shank - right-hand cutting - high-performance twist drill with increased concentricity in long design - suitable for deep drilling work in common materials - high fracture resistance - low feed rates and more frequent chip evacuation are required for deep hole drilling - for alloyed and unalloyed steel and cast steel (up to approx. 900 N/mm² strength), grey cast iron, malleable cast iron, ductile cast iron, die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, bronze and brass Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.16 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€43,83
-
Ruko RUKO twist drill DIN 340 type N nominal Ø 6.5 mm ( 4000600974 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 340 type N nominal Ø 6.5 mm Product Description: HSS - DIN 340 - type N - point angle 118 ° - profile ground - taper ground - with straight shank - right-hand cutting - high-performance twist drill with increased concentricity in long design - suitable for deep drilling work in common materials - high fracture resistance - low feed rates and more frequent chip evacuation are required for deep hole drilling - for alloyed and unalloyed steel and cast steel (up to approx. 900 N/mm² strength), grey cast iron, malleable cast iron, ductile cast iron, die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, bronze and brass Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.13 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€33,26
-
Ruko RUKO twist drill DIN 340 type N nominal Ø 6 mm ( 4000600969 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 340 type N nominal Ø 6 mm Product Description: HSS - DIN 340 - type N - point angle 118 ° - profile ground - taper ground - with straight shank - right-hand cutting - high-performance twist drill with increased concentricity in long design - suitable for deep drilling work in common materials - high fracture resistance - low feed rates and more frequent chip evacuation are required for deep hole drilling - for alloyed and unalloyed steel and cast steel (up to approx. 900 N/mm² strength), grey cast iron, malleable cast iron, ductile cast iron, die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, bronze and brass Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.12 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€27,83
-
Ruko RUKO twist drill DIN 340 type N nominal Ø 5.5 mm ( 4000600964 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 340 type N nominal Ø 5.5 mm Product Description: HSS - DIN 340 - type N - point angle 118 ° - profile ground - taper ground - with straight shank - right-hand cutting - high-performance twist drill with increased concentricity in long design - suitable for deep drilling work in common materials - high fracture resistance - low feed rates and more frequent chip evacuation are required for deep hole drilling - for alloyed and unalloyed steel and cast steel (up to approx. 900 N/mm² strength), grey cast iron, malleable cast iron, ductile cast iron, die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, bronze and brass Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.11 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€27,52
-
Ruko RUKO twist drill DIN 340 type N nominal Ø 5 mm ( 4000600959 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 340 type N nominal Ø 5 mm Product Description: HSS - DIN 340 - type N - point angle 118 ° - profile ground - taper ground - with straight shank - right-hand cutting - high-performance twist drill with increased concentricity in long design - suitable for deep drilling work in common materials - high fracture resistance - low feed rates and more frequent chip evacuation are required for deep hole drilling - for alloyed and unalloyed steel and cast steel (up to approx. 900 N/mm² strength), grey cast iron, malleable cast iron, ductile cast iron, die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, bronze and brass Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.1 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€25,93
-
Ruko RUKO sheet metal peel drill set 3-14 / 5-20 / 16-30.5 mm ( 4000601698 )
Thu, 10/09/2025
Scope of Delivery: - Sheet metal peel drill set 3-14 / 5-20 / 16-30.5 mm Product Description: Shaft with 3 clamping surfaces - 1 tin of cutting paste 30 g - in impact-resistant and break-proof plastic case Technical Data: - Packaging: ABS plastic caseFor commercial use, please observe the building regulations!
€67,98
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"