Drill Bits
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 12.5 mm ( 4000600532 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 12.5 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.16 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€62,02
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 12 mm ( 4000600531 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 12 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.16 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€51,56
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 11.5 mm ( 4000600530 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 11.5 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.16 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€50,18
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 11 mm ( 4000600529 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 11 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.16 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€43,85
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 3.5 mm ( 4000600448 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 3.5 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.07mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€19,44
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 1.5 mm ( 4000600424 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 1.5 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.03mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€18,07
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 13 mm ( 4000600259 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 13 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.21 mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
€35,32
-
Ruko RUKO Spiralbohrer DIN 338 Typ N Nenn-Ø 7,2 mm ( 4000600195 )
Lieferumfang:Spiralbohrer DIN 338 Typ N Nenn-Ø 7,2 mmProduktbeschreibung:HSS · DIN 338 · Typ N · Spitzenwinkel 118 ° · rechtsschneidend · Kegelmantelanschliff, ab Ø 2,0 mm Kreuzanschliff nach DIN 1412 C · der komplett geschliffene Spiralbohrer verfügt über eine erhöhte Rundlaufgenauigkeit · für Stahl, Stahlguss legiert und unlegiert (bis 900 N/mm² Festigkeit), Grau-, Temper-, Sphäro- und Druckguss, Sintereisen, Neusilber, Graphit, kurzspanende Aluminiumlegierungen, Messing und Bronze · Leistungsstarker Spiralbohrer, geeignet für alle normalen Bohrarbeiten in allgemein gängigen Werkstoffen Weitere Größen auf Anfrage verfügbar.Technische Daten: Schneidrichtung: rechtsschneidend Vorschub in Stahl bis 800 N: 0,14mm/U Qualität: profilgeschliffen Nenn-Ø-Toleranz: h8
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 5 mm ( 4000600169 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 5 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.1 mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
€15,64
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 17 mm HSS-Co5 ( 4000600107 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 17 mm HSS-Co5 Product Description: HSS-Co5 - DIN 338 - type N - point angle 130 ° - profile ground - right-hand cutting - cross cut to DIN 1412 C - with stepped shank - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, tempered and case-hardened steels as well as stainless and acid-resistant steels - ideal for drilling larger drill diameters for all standard drills with a chuck up to 13.0 mm Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.14 mm/rev - Quality: profile ground - Shank length: 35mmFor commercial use, please observe the building regulations!
€31,27
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 16 mm HSS-Co5 ( 4000600105 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 16 mm HSS-Co5 Product Description: HSS-Co5 - DIN 338 - type N - point angle 130 ° - profile ground - right-hand cutting - cross cut to DIN 1412 C - with stepped shank - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, tempered and case-hardened steels as well as stainless and acid-resistant steels - ideal for drilling larger drill diameters for all standard drills with a chuck up to 13.0 mm Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.14 mm/rev - Quality: profile ground - Shank length: 30mmFor commercial use, please observe the building regulations!
€29,23
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 13.5 mm HSS-Co5 ( 4000600100 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 13.5 mm HSS-Co5 Product Description: HSS-Co5 - DIN 338 - type N - point angle 130 ° - profile ground - right-hand cutting - cross cut to DIN 1412 C - with stepped shank - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, tempered and case-hardened steels as well as stainless and acid-resistant steels - ideal for drilling larger drill diameters for all standard drills with a chuck up to 13.0 mm Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.14 mm/rev - Quality: profile ground - Shank length: 30mmFor commercial use, please observe the building regulations!
€22,60
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"