Drill Bits
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 3.3 mm ( 4000600446 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 3.3 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as for stainless and acid-resistant steels - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.07mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€18,07
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 10 mm ( 4000600526 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 10 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.16 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€58,40
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 8 mm ( 4000600502 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 8 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.13 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€44,13
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 7.5 mm ( 4000600496 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 7.5 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.12 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€39,18
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 6.5 mm ( 4000600484 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 6.5 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.1 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€30,30
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 6 mm ( 4000600478 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 6 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.1 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€27,43
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 5.5 mm ( 4000600472 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 5.5 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.09 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€27,04
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 5 mm ( 4000600466 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 5 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.08 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€22,62
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 4 mm ( 4000600454 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 4 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.08 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€20,19
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 3 mm ( 4000600442 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 3 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.06mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€17,28
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 2 mm ( 4000600430 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 2 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.04 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€16,70
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 3 mm ( 4000600145 )
Thu, 10/09/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 3 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.08 mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
€12,29
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"