Drill Bits
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 6.6 mm ( 4000600485 )
Tue, 10/07/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 6.6 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.1 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€32,17
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 6.2 mm ( 4000600480 )
Tue, 10/07/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 6.2 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.1 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€30,30
-
Ruko RUKO Spiralbohrer DIN 338 Typ INOX Nenn-Ø 5,3 mm ( 4000600470 )
Lieferumfang:Spiralbohrer DIN 338 Typ INOX Nenn-Ø 5,3 mmProduktbeschreibung:HSS-Co5 · DIN 338 · Typ INOX · Spitzenwinkel 130 ° · rechtsschneidend · Kegelmantelanschliff, ab Ø 2,0 mm Kreuzanschliff nach DIN 1412 C · der komplett geschliffene Spiralbohrer verfügt über eine erhöhte Rundlaufgenauigkeit · für unlegierte und legierte Stähle (bis 1100 N/mm² Festigkeit), Warm- und Kaltarbeitsstähle, Vergütungs- und Einsatzstähle sowie für rost- und säurebeständige Stähle · Leistungsstarker Spiralbohrer, geeignet für alle normalen Bohrarbeiten in allgemein gängigen Werkstoffen Weitere Größen auf Anfrage verfügbar.Technische Daten: Schneidrichtung: rechtsschneidend Vorschub in Stahl bis 800 N: 0,08mm/U Qualität: profilgeschliffen
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 5.2 mm ( 4000600468 )
Tue, 10/07/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 5.2 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.08 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€23,41
-
Ruko RUKO twist drill DIN 338 type INOX nominal Ø 4.8 mm ( 4000600464 )
Tue, 10/07/2025
Scope of Delivery: - Twist drill DIN 338 type INOX nominal Ø 4.8 mm Product Description: HSS-Co5 - DIN 338 - type INOX - point angle 130 ° - right-hand cutting - taper ground, from Ø 2.0 mm cross ground to DIN 1412 C - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, heat-treatable and case-hardened steels as well as stainless and acid-resistant steels - high-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.08 mm/rev - Quality: profile groundFor commercial use, please observe the building regulations!
€22,27
-
HELLER HELLER concrete/stone drill set ISO5468 5-piece ( 4000864350 )
Tue, 10/07/2025
Scope of Delivery: - Concrete/stone drill set ISO5468 5-piece Product Description: Cylindrical shank - robust concrete & masonry drill bit with optimised carbide geometry - long service life - high speed thanks to optimised head design with wide spout and large-volume "Twinmax-G2" helix - high breaking strength thanks to special hardening/blasting technology Areas of application: Concrete, masonry, sand-lime brick, stone Technical Data: - nanFor commercial use, please observe the building regulations!
€30,70
-
HELLER HELLER ProConcrete 7-piece concrete/stone drill set ( 4000864352 )
Tue, 10/07/2025
Scope of Delivery: - ProConcrete 7-piece concrete/stone drill set Product Description: Cylindrical shank - robust concrete & masonry drill bit with optimised carbide geometry - long service life - high speed thanks to optimised head design with wide spout and large-volume "Twinmax-G2" helix - high breaking strength thanks to special hardening/blasting technology Areas of application: Concrete, masonry, sand-lime brick, stone Technical Data: - nanFor commercial use, please observe the building regulations!
€42,89
-
Festool Festool DB STONE CE D8 3x Steinbohrer ( 769114 ) für Festool Akku-Schlagbohrschrauber mit FastFix Aufnahme und Werkzeugfutter WH-CE CENTROTEC
Der langlebige Steinbohrer mit Hartmetallschneide liefert sauberste Bohrergebnisse in Stein und Mauerwerk. Durch die CENTROTEC-Aufnahme kann der Bohrer schnell und einfach in das CENTROTEC Werkzeugfutter eingespannt werden.Für exakte Bohrergebnisse.Stärken und Nutzen- Ideal für Bohrungen in Natur-und Kunststein, Mauerwerk, Kalksandstein und FliesenAnwendungsschwerpunkte- Bohrarbeiten in Stein, Mauerwerk und Fliesen- MontagearbeitenPassend für- für Festool Akku-Schlagbohrschrauber mit FastFix Aufnahme und Werkzeugfutter WH-CE CENTROTEC- mit langlebiger HartmetallschneideTechnische Daten:Durchmesser 8,00 mmBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!
-
Festool Festool DB STONE CE D6 3x Steinbohrer ( 769113 ) für Festool Akku-Schlagbohrschrauber mit FastFix Aufnahme und Werkzeugfutter WH-CE CENTROTEC
Der langlebige Steinbohrer mit Hartmetallschneide liefert sauberste Bohrergebnisse in Stein und Mauerwerk. Durch die CENTROTEC-Aufnahme kann der Bohrer schnell und einfach in das CENTROTEC Werkzeugfutter eingespannt werden.Für exakte Bohrergebnisse.Stärken und Nutzen- Ideal für Bohrungen in Natur-und Kunststein, Mauerwerk, Kalksandstein und FliesenAnwendungsschwerpunkte- Bohrarbeiten in Stein, Mauerwerk und Fliesen- MontagearbeitenPassend für- für Festool Akku-Schlagbohrschrauber mit FastFix Aufnahme und Werkzeugfutter WH-CE CENTROTEC- mit langlebiger HartmetallschneideTechnische Daten:Durchmesser 6,00 mmBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!
-
Festool Festool DB STONE CE D5 3x Steinbohrer ( 769112 ) für Festool Akku-Schlagbohrschrauber mit FastFix Aufnahme und Werkzeugfutter WH-CE CENTROTEC
Der langlebige Steinbohrer mit Hartmetallschneide liefert sauberste Bohrergebnisse in Stein und Mauerwerk. Durch die CENTROTEC-Aufnahme kann der Bohrer schnell und einfach in das CENTROTEC Werkzeugfutter eingespannt werden.Für exakte Bohrergebnisse.Stärken und Nutzen- Ideal für Bohrungen in Natur-und Kunststein, Mauerwerk, Kalksandstein und FliesenAnwendungsschwerpunkte- Bohrarbeiten in Stein, Mauerwerk und Fliesen- MontagearbeitenPassend für- für Festool Akku-Schlagbohrschrauber mit FastFix Aufnahme und Werkzeugfutter WH-CE CENTROTEC- mit langlebiger HartmetallschneideTechnische Daten:Durchmesser 5,00 mmBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!
-
Festool Festool DB STONE CE D4 3x Steinbohrer ( 769111 ) für Festool Akku-Schlagbohrschrauber mit FastFix Aufnahme und Werkzeugfutter WH-CE CENTROTEC
Der langlebige Steinbohrer mit Hartmetallschneide liefert sauberste Bohrergebnisse in Stein und Mauerwerk. Durch die CENTROTEC-Aufnahme kann der Bohrer schnell und einfach in das CENTROTEC Werkzeugfutter eingespannt werden.Für exakte Bohrergebnisse.Stärken und Nutzen- Ideal für Bohrungen in Natur-und Kunststein, Mauerwerk, Kalksandstein und FliesenAnwendungsschwerpunkte- Bohrarbeiten in Stein, Mauerwerk und Fliesen- MontagearbeitenPassend für- für Festool Akku-Schlagbohrschrauber mit FastFix Aufnahme und Werkzeugfutter WH-CE CENTROTEC- mit langlebiger HartmetallschneideTechnische Daten:Durchmesser 4,00 mmBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!
-
Festool Festool DB STONE CE D10 3x Steinbohrer ( 769115 ) für Festool Akku-Schlagbohrschrauber mit FastFix Aufnahme und Werkzeugfutter WH-CE CENTROTEC
Der langlebige Steinbohrer mit Hartmetallschneide liefert sauberste Bohrergebnisse in Stein und Mauerwerk. Durch die CENTROTEC-Aufnahme kann der Bohrer schnell und einfach in das CENTROTEC Werkzeugfutter eingespannt werden.Für exakte Bohrergebnisse.Stärken und Nutzen- Ideal für Bohrungen in Natur-und Kunststein, Mauerwerk, Kalksandstein und FliesenAnwendungsschwerpunkte- Bohrarbeiten in Stein, Mauerwerk und Fliesen- MontagearbeitenPassend für- für Festool Akku-Schlagbohrschrauber mit FastFix Aufnahme und Werkzeugfutter WH-CE CENTROTEC- mit langlebiger HartmetallschneideTechnische Daten:Durchmesser 10,00 mmBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"