Scope of Delivery:
- 1x Festool UG-CSC-SYS underframe
Product Description:
The UG-CSC-SYS base frame is the perfect 3-in-1 solution for your assembly work: It is a heavy-duty sack truck that easily transports Systainers in the tower weighing up to 80 kg. And it also serves as a mobile work table - one with a surface area of 58 x 58 cm and a perforated plate for securing workpieces that can bear a load of up to 100 kg. Thanks to its folding legs, it can be used flexibly - once set up, the working height is raised to 90 cm and the legs remain folded in for floor laying work. Combined with the CSC SYS 50 cordless table saw, it is a practical alternative to trestles and ideal for rip, cross and angle cuts. Utilise the advantages of the UG-CSC-SYS base frame and simplify your next assembly job!
Technical Data:
- Manufacturer: Festool
- Manufacturer designation: UG-CSC-SYS
- Manufacturer number: 577001
- Table dimensions: 580 x 580 mm
- Dimensions (L x W x H): 1 067 x 580 x 245 mm
- Table height working position high: 677.00 mm
- Table height working position low: 245.00 mm
- Load capacity as work table / sack truck: 100 / 80 kg
- Product weight: 18.13 kg
- Transport weight incl. accessories: 25.30 kg
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Scope of Delivery:
- 1x Festool KT-TKS 80 cartridge SawStop technology
Product Description:
The Festool KT-TKS 80 cartridge is the centrepiece of the TKS 80 table saw and brings maximum safety to the workshop. The sensitive SawStop technology ensures greater safety when sawing non-conductive metals. The saw stops immediately on contact with the skin and disappears into the work surface. The cartridge releases a pre-tensioned spring and shoots an aluminium block into the saw blade. Once released, the cartridge can be replaced in a few simple steps. Every year there are around 4000 injuries when using a circular saw. This corresponds to 16 injuries per working day. Approximately 26% of serious accidents result in an accident pension. These figures should give every user pause for thought, and you should invest in your most valuable asset - your body and your health. Festool is a premium manufacturer of power tools and is characterised by its high quality standards and sophisticated tool concepts.
Technical Data:
- Manufacturer: Festool
- Manufacturer number: 575851
- Compatible: TKS 80 circular table saw
- Technology: SawStop
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Scope of Delivery:
- 1x Festool CSC SYS 50 EBI cordless circular table saw 168 mm
- 1x hexagon socket spanner SW 6
- 1x circular saw blade WOOD FINE CUT HW 168x1.8x20 WD42
- 1x rip fence
- 1x push stick
- 1x spade wedge for concealed cuts
- 1x spade wedge with protective cover
- 1x chip bag
- 1x angle stop
- 2x Festool BP 18 Li 5.0 ASI rechargeable battery
- 1x Festool TCL 6 DUO quick charger
- 2x Systainer
- 1x suitable insert
Product Description:
The CSC SYS 50 cordless table saw is so compact that it fits into a Systainer. Its external dimensions are extremely handy, but it is surprisingly versatile in use: with parallel cuts of up to 280 mm, a cross-cut width of up to 450 mm and angle cuts from -2° to 47°. The unique digital operation delivers extremely precise results down to a tenth of a millimetre. The 2x18 V dual battery system in combination with the brushless EC-TEC motor impresses with power and pulling force - you won't feel any difference to mains-powered machines. Together with the UG-CSC-SYS base frame, you have the perfect work table with you and transport from the vehicle to the work site is effortless. In short: sawing precision to go!
Technical Data:
- Manufacturer: Festool
- Battery voltage: 2 x 18 V
- Idle speed: 4 500 - 6 800 min-¹
- Saw blade mounting hole: 20 mm
- Tilt angle: -10 - +47 °
- Cutting height 0°: 0 - 48 mm
- Cutting height 45°: 0 - 34 mm
- Cutting height -10°: 21 - 32 mm
- Mitre angle: 0 - 70 °
- Parallel cutting width: 280 mm
- Table height: 280 mm
- Dimensions (L x W x H): 512 x 396 x 296 mm
- Dust extraction connection Ø: 27/36 mm
- Drive type: Battery
- Product weight: 15 kg
- Saws: A-weighted sound pressure level Lp: 85 dB(A)
- Saws: A-weighted sound power level Lw: 98 dB(A)
- Saws: EN series of standards: 62841
- Saws: Uncertainty (noise) K: 3 dB
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Scope of Delivery:
- 1x Festool CSC SYS 50 EBI-Basic cordless circular table saw 168 mm ( 576820 )
- 1x hexagon socket spanner SW 6
- 1x circular saw blade WOOD FINE CUT HW 168x1.8x20 WD42
- 1x rip fence
- 1x push stick
- 1x spade wedge for concealed cuts
- 1x spade wedge with protective cover
- 1x chip bag
- 1x angle stop
- 1x Systainer
- without battery, without charger
Product Description:
The CSC SYS 50 cordless table saw is so compact that it fits into a Systainer. Its external dimensions are extremely handy, but it is surprisingly versatile in use: with parallel cuts of up to 280 mm, a cross-cut width of up to 450 mm and angle cuts from -2° to 47°. The unique digital operation delivers extremely precise results down to a tenth of a millimetre. The 2x18 V dual battery system in combination with the brushless EC-TEC motor impresses with power and pulling force - you won't feel any difference to mains-powered machines. Together with the UG-CSC-SYS base frame, you have the perfect work table with you and transport from the vehicle to the work site is effortless. In short: sawing precision to go!
Technical Data:
- Manufacturer: Festool
- Battery voltage: 2 x 18 V
- Idle speed: 4 500 - 6 800 min-¹
- Saw blade mounting hole: 20 mm
- Tilt angle: -10 - +47 °
- Cutting height 0°: 0 - 48 mm
- Cutting height 45°: 0 - 34 mm
- Cutting height -10°: 21 - 32 mm
- Mitre angle: 0 - 70 °
- Parallel cutting width: 280 mm
- Table height: 280 mm
- Dimensions (L x W x H): 512 x 396 x 296 mm
- Dust extraction connection Ø: 27/36 mm
- Drive type: Battery
- Product weight: 15 kg
- Saws: A-weighted sound pressure level Lp: 85 dB(A)
- Saws: A-weighted sound power level Lw: 98 dB(A)
- Saws: EN series of standards: 62841
- Saws: Uncertainty (noise) K: 3 dB
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Scope of Delivery:
- 1x Festool CSC SYS 50 EBI cordless circular table saw 168 mm
- 1x Allen key SW 6
- 1x Circular saw blade WOOD FINE CUT HW 168x1.8x20 WD42
- 1x rip fence
- 1x push stick
- 1x spade wedge for concealed cuts
- 1x spade wedge with protective cover
- 1x chip bag
- 1x Angle stop
- 1x Festool UG-CSC-SYS
- 2x Festool BP 18 Li 5.0 ASI rechargeable battery
- 1x Festool TCL 6 DUO quick charger
- 2x Systainer
- 1x suitable insert
Product Description:
The CSC SYS 50 cordless table saw is so compact that it fits into a Systainer. Its external dimensions are extremely handy, but it is surprisingly versatile in use: with parallel cuts of up to 280 mm, a cross-cut width of up to 450 mm and angle cuts from -2° to 47°. The unique digital operation delivers extremely precise results down to a tenth of a millimetre. The 2x18 V dual battery system in combination with the brushless EC-TEC motor impresses with power and pulling force - you won't feel any difference to mains-powered machines. Together with the UG-CSC-SYS base frame, you have the perfect work table with you and transport from the vehicle to the work site is effortless. In short: sawing precision to go!
Technical Data:
- Manufacturer: Festool
- Battery voltage: 2 x 18 V
- Idle speed: 4 500 - 6 800 min-¹
- Saw blade mounting hole: 20 mm
- Tilt angle: -10 - +47 °
- Cutting height 0°: 0 - 48 mm
- Cutting height 45°: 0 - 34 mm
- Cutting height -10°: 21 - 32 mm
- Mitre angle: 0 - 70 °
- Parallel cutting width: 280 mm
- Table height: 280 mm
- Dimensions (L x W x H): 512 x 396 x 296 mm
- Dust extraction connection Ø: 27/36 mm
- Drive type: Battery
- Product weight: 15 kg
- Saws: A-weighted sound pressure level Lp: 85 dB(A)
- Saws: A-weighted sound power level Lw: 98 dB(A)
- Saws: EN series of standards: 62841
- Saws: Uncertainty (noise) K: 3 dB
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Scope of Delivery:
- 1x Festool CSC SYS 50 EBI cordless circular table saw 168 mm
- 1x Allen key SW 6
- 1x Circular saw blade WOOD FINE CUT HW 168x1.8x20 WD42
- 1x rip fence
- 1x push stick
- 1x spade wedge for concealed cuts
- 1x spade wedge with protective cover
- 1x chip bag
- 1x angle stop
- 1x Systainer
- 1x Festool UG-CSC-SYS base frame
- without battery, without charger
Product Description:
The CSC SYS 50 cordless table saw is so compact that it fits into a Systainer. Its external dimensions are extremely handy, but it is surprisingly versatile in use: with parallel cuts of up to 280 mm, a cross-cut width of up to 450 mm and angle cuts from -2° to 47°. The unique digital operation delivers extremely precise results down to a tenth of a millimetre. The 2x18 V dual battery system in combination with the brushless EC-TEC motor impresses with power and pulling force - you won't feel any difference to mains-powered machines. Together with the UG-CSC-SYS base frame, you have the perfect work table with you and transport from the vehicle to the work site is effortless. In short: sawing precision to go!
Technical Data:
- Manufacturer: Festool
- Manufacturer's description: CSC SYS 50 EBI-Basic-Set
- Manufacturer number: 577371
- Battery voltage: 2 x 18 V
- Idle speed: 4 500 - 6 800 min-¹
- Saw blade mounting hole: 20 mm
- Tilt angle: -10 - +47 °
- Cutting height 0°: 0 - 48 mm
- Cutting height 45°: 0 - 34 mm
- Cutting height -10°: 21 - 32 mm
- Mitre angle: 0 - 70 °
- Parallel cutting width: 280 mm
- Table height: 280 mm
- Dimensions (L x W x H): 512 x 396 x 296 mm
- Dust extraction connection Ø: 27/36 mm
- Drive type: Battery
- Product weight: 15 kg
- Saws: A-weighted sound pressure level Lp: 85 dB(A)
- Saws: A-weighted sound power level Lw: 98 dB(A)
- Saws: EN series of standards: 62841
- Saws: Uncertainty (noise) K: 3 dB
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Package contents:
- 1x Festool Table Saw TKS 80 EBS
- 1x Suction set
- 1x Open-end spanner SW 23
- 1x Open-end spanner SW 50
- 1x HW Universal saw blade W40
- 1x Allen key SW 5
- 1x Cartridge KT TKS 80
- 1x Sliding stick
- 1x Angled stop
Product description:
The TKS 80 EBS table saw from Festool ensures maximum safety in the workshop. Its built-in sensitive SawStop technology ensures greater safety when sawing non-conductive metals. The saw will stop immediately upon skin contact and disappear into the work surface. The cartridge releases a pre-tensioned spring and shoots an aluminium block into the saw blade. The SawStop technology can also be switched off, so that conductive materials can then be sawn. After release, the cartridge can be replaced in a few simple steps. Every year there are about 4000 injuries when using a circular saw. This corresponds to 16 injuries per working day. Approximately 26 % of serious accidents are then covered by an accident pension. These figures should make every user think, and one should invest in his or her highest asset, the body and its integrity. The TKS 80 EBS can be used very flexibly. Whether a cutting height of 80 mm, the extendable working length or the longitudinal and crosscut fence, all this ensures great flexibility when working. The angle scale with locking points and fine adjustment is perfectly suited for crosscutting and longitudinal cuts. There is less tearing on the workpiece thanks to the left-hand swivelling of the saw blade. Crosscuts up to a width of 820 mm with sliding table are possible without any problems at a cutting depth of 20 mm. Longitudinal cuts up to a cutting height of 80 mm and a width of 600 mm with widening are also no problem. Moreover, the CLEANTEC extraction socket ensures a clear visibility and low-dust working. The side-mounted tool garage provides space for saw blades, cartridges and the sliding stick. Festool is a premium manufacturer of power tools, the high quality standards and the sophisticated tool concepts are what make this brand stand out.
Technical specifications:
Manufacturer: Festool
Manufacturer number: 575781
Power consumption 2 200 W
Idle speed: 1700 - 3500 min-¹
Saw blade Ø: 254 mm
Cutting height 90°/45°: 80/56 mm
Inclination: -2 / 47 °
Table dimensions: 690 x 580 mm
Table height folded: 385 mm
Table height folded out: 900 mm
Dust extraction connection Ø: 27/36 mm
Weight: 37 kg
Drive type: Mains
Sawing: A-weighted sound pressure level Lp: 87 dB(A)
Sawing: A-weighted sound power level Lw: 102 dB(A)
Sawing: uncertainty (noise) K: 3 dB
