Hammers
-
PROBST PROBST rubber mallet accessories GH ERGO 2x bevelled ( 4000818780 )
Wed, 09/24/2025
Scope of Delivery: - Rubber mallet accessories GH ERGO 2x bevelled Product Description: GMT rubber rail 75/40 x 60 x 60 mm, made of NK-SBR 65 Shore 2 M8 weight - hole spacing 55 Technical Data: - Weight:For commercial use, please observe the building regulations!
€60,82
-
PROBST PROBST GH ERGO rubber mallet tare weight 2.9 kg ( 4000818778 )
Wed, 09/24/2025
Scope of Delivery: - Rubber mallet GH ERGO dead weight 2.9 kg Product Description: equipped with two different rubber elements - one side is fitted with a rectangular, slightly bevelled profile, so the rubber profile hits the stone flat without the user having to stand too close to the edge of the stone layer - on the second side, the profile tapers in the shape of a roof, which enables accurate striking, e.g. into the hollows of H-shaped stones - length of the hammer handle, previously 800 mm, now 1000 mm, enables an ergonomically upright posture and fatigue-free workingThe length of the hammer handle has been increased from 800 mm to 1000 mm, enabling an ergonomically upright posture and fatigue-free working - Special butyl rubber elements protect wrists and elbows - Unpleasant bounce when striking is completely eliminated by the damping system Technical Data: - nanFor commercial use, please observe the building regulations!
€107,08
-
KRONEN-HANSA KRONEN-HANSA tile hammer with plastic safety handle ( 4000817161 )
Wed, 09/24/2025
Scope of Delivery: - Tile hammer with plastic safety handle Product Description: with plastic safety handle - black, white head Technical Data: - Width: 60mm - Length: 110mmFor commercial use, please observe the building regulations!
€22,65
-
HALDER HALDER SUPERCRAFT sledge hammer head Ø 80 mm length 880 mm ( 4000811520 )
Wed, 09/24/2025
Scope of Delivery: - SUPERCRAFT sledge hammer Head Ø 80 mm Length 880 mm Product Description: recoilless - with replaceable, wear-resistant nylon impact heads - no splintering, low-noise - replaceable - with high impact strength - the steel centre piece has a closed cavity, which is partially filled with steel shot - on impact, the shot is thrown to the striking side and causes recoilless striking - impact effect up to 100 % greater than with normal soft-face mallets - with very sturdy hickory handle (does not break in two) and steel handle sleeve - areas of application: Driving splitting wedges, fence construction, levelling work, track construction, repair/maintenance work, toolmaking/mechanical engineering Technical Data: - Inserts: Nylon white - Impact: hardFor commercial use, please observe the building regulations!
€194,12
-
HALDER HALDER SIMPLEX sledge hammer head Ø 80 mm length 800 mm ( 4000811700 )
Wed, 09/24/2025
Scope of Delivery: - Sledge hammer SIMPLEX Head Ø 80 mm Length 800 mm Product Description: with interchangeable striking heads made of white superplastic - very durable - wear-resistant - hickory handle - medium-hard impact - areas of application: Setting kerbstones, tent/hall construction, fence construction, track construction, gardening/landscaping, hammering in wedges Technical Data: - Weight: 3090g - Inserts: Superplastic white - Impact: medium hardFor commercial use, please observe the building regulations!
€122,92
-
HALDER HALDER SUPERCRAFT sledge hammer head Ø 100 mm length 1000 mm ( 4000811524 )
Wed, 09/24/2025
Scope of Delivery: - SUPERCRAFT sledge hammer Head Ø 100 mm Length 1000 mm Product Description: recoilless - with replaceable, wear-resistant nylon impact heads - no splintering, low-noise - replaceable - with high impact strength - the steel centre piece has a closed cavity, which is partially filled with steel shot - on impact, the shot is thrown to the striking side and causes recoilless striking - impact effect up to 100 % greater than with normal soft-face mallets - with very sturdy hickory handle (does not break in two) and steel handle sleeve - areas of application: Driving splitting wedges, fence construction, levelling work, track construction, repair/maintenance work, toolmaking/mechanical engineering Technical Data: - Inserts: Nylon white - Impact: hardFor commercial use, please observe the building regulations!
€320,13
-
HALDER HALDER SUPERCRAFT sledge hammer head Ø 100 mm length 1000 mm ( 4000811521 )
Wed, 09/24/2025
Scope of Delivery: - SUPERCRAFT sledge hammer Head Ø 100 mm Length 1000 mm Product Description: recoilless - with replaceable, wear-resistant nylon impact heads - no splintering, low-noise - replaceable - with high impact strength - the steel centre piece has a closed cavity, which is partially filled with steel shot - on impact, the shot is thrown to the striking side and causes recoilless striking - impact effect up to 100 % greater than with normal soft-face mallets - with very sturdy hickory handle (does not break in two) and steel handle sleeve - areas of application: Driving splitting wedges, fence construction, levelling work, track construction, repair/maintenance work, toolmaking/mechanical engineering Technical Data: - Inserts: Nylon white - Impact: hardFor commercial use, please observe the building regulations!
€294,47
-
HALDER HALDER SIMPLEX sledge hammer head Ø 80 mm length 800 mm ( 4000760017 )
Wed, 09/24/2025
Scope of Delivery: - Sledge hammer SIMPLEX Head Ø 80 mm Length 800 mm Product Description: 2-part clamping housing made of malleable cast iron - Impact inserts and Simplex handle can be easily replaced by loosening or tightening the hexagon socket clamping screw - With 1 impact insert each made of rubber compound, black medium-hard and superplastic white medium-hard - Areas of application: Gardening/landscaping, setting kerbstones, setting brickwork/stairs, fence construction, hammering in wedges, scaffolding/tent construction, carpentry, prefabricated house construction Technical Data: - Weight: 3170g - Inserts: Superplastic white/rubber black - Impact: medium hardFor commercial use, please observe the building regulations!
€107,37
-
HALDER HALDER SIMPLEX sledge hammer head Ø 140 mm length 1045 mm ( 4000811703 )
Wed, 09/24/2025
Scope of Delivery: - Sledge hammer SIMPLEX Head Ø 140 mm Length 1045 mm Product Description: with interchangeable striking heads made of white superplastic - very durable - wear-resistant - hickory handle - medium-hard impact - areas of application: Setting kerbstones, tent/hall construction, fence construction, track construction, gardening/landscaping, hammering in wedges Technical Data: - Weight: 7900g - Inserts: Superplastic white - Impact: medium hardFor commercial use, please observe the building regulations!
€293,90
-
HALDER HALDER SIMPLEX sledge hammer head Ø 100 mm length 1000 mm ( 4000760153 )
Wed, 09/24/2025
Scope of Delivery: - Sledge hammer SIMPLEX Head Ø 100 mm Length 1000 mm Product Description: 2-part clamping housing made of malleable cast iron - Impact inserts and Simplex handle can be easily replaced by loosening or tightening the hexagon socket clamping screw - With 1 impact insert each made of rubber compound, black medium-hard and superplastic white medium-hard - Areas of application: Gardening/landscaping, setting kerbstones, setting brickwork/stairs, fence construction, hammering in wedges, scaffolding/tent construction, carpentry, prefabricated house construction Technical Data: - Weight: 5350g - Inserts: Superplastic white/rubber black - Impact: medium hardFor commercial use, please observe the building regulations!
€180,67
-
HALDER HALDER SUPERCRAFT soft-face mallet length 380 mm head Ø 80 mm ( 4000811593 )
Wed, 09/24/2025
Scope of Delivery: - SUPERCRAFT soft-face mallet Length 380 mm Head Ø 80 mm Product Description: with replaceable, wear-resistant nylon impact heads, no chipping, low-noise, replaceable - on impact, the shot is thrown to the impact side and causes recoilless impact - impact effect up to 100 % greater than with normal soft-face mallets - with painted hickory handle and steel handle sleeve - areas of application: Assembly/repair work in the automotive sector, positioning workpieces in a vice, tent/hall construction, car body construction, repair/maintenance work, straightening work, housing assembly, assembly of sharp-edged workpieces, joining workpieces, sheet metal processing, fence construction, plant construction Technical Data: - Length: 380mm - Weight: 3210g - Head length: 168mm - Inserts: Nylon white - Impact: hard - Handle: HickoryFor commercial use, please observe the building regulations!
€157,13
-
ENDRES TOOLS ENDRES TOOLS Sledge hammer 5000 g ( 4000826925 )
Scope of Delivery: - Sledge hammer 5000 g Product Description: non-sparking - made of aluminium-multi-material bronze - with hickory handle Technical Data: - nanFor commercial use, please observe the building regulations!
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"