Makita 18V Werkzeuge mit Makpac und Akku - ohne Ladegerät

Show previous products

• 

  Makita Makita DTW 701 F1J cordless impact wrench 18 V 700 Nm 1/2" XPT Brushless + 1x rechargeable battery 3.0 Ah + Makpac - without charger

  Sat, 12/06/2025

  Scope of Delivery: - 1x Makita DTW 701 cordless impact wrench - 1x belt clip - 1x Makita BL 1830 B 18 V 3.0 Ah rechargeable battery - 1x Makita Makpac - 1x universal insert - without charger Product Description: The DTW 701 from Makita is a powerful 18 volt cordless impact wrench with a maximum tightening torque of 700 Newton metres. It is particularly suitable for industrial production and other construction applications. The 1/2 inch external square drive with ball detent ensures that your impact sockets have a particularly good grip on the machine. With the four speed levels and 4 additional programmes for tightening and loosening screws, you can always find the optimum working mode for your application. The auto-stop function stops the cordless impact wrench automatically after 0.5 to one second after the impact mode has started and after the nut/screw has been sufficiently loosened. This prevents unintentional dropping. This is particularly useful when changing tyres and when working at height, e.g. on scaffolding. The brushless motor guarantees more endurance with a longer service life and a more compact design. The deep discharge protection ensures that the tool switches off automatically when the battery is almost empty to protect the battery from damage to the cells. A double LED with afterglow function ensures a better view of your work area in difficult lighting conditions. The DTW 701 is also equipped with XPT technology ( eXtreme Protection Technology ), which means that the impact wrench is protected against dust and splash water and can also be used in adverse weather conditions. Makita is a leading manufacturer of power tools, characterised by a long tradition and the highest quality standards. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DTW 701 - Battery voltage: 18 V - Hard torque: 150 / 200 / 320 / 700 Nm - Idle speed: 0 - 500 / 1200 / 1900 / 2200 min-¹ - Idle speed: 0 - 1000 / 1700 / 2400 / 2700 min-¹ - Release torque: 1000 Nm - External square drive: 1/2 " - Standard screws: M10 - M24 - High-strength screws: M10 - M16 - Sound power level (LWA): 105 dB(A) - Sound pressure level (LpA): 94 dB(A) - K-value noise: 3 dB(A) - Vibration impact screws at full load: 19 m/s² - K-value vibration: 2.0 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €330,15

• 

  Options

  Makita Makita DUM 604 F1XJ Akku Grasschere 18 V mit Gras- und Strauchscherblatt + 1x Akku 3,0 Ah + Makpac - ohne Ladegerät

  Lieferumfang:- 1x Makita DUM 604 18 V Akku Grasschere- 1x Makita BL 1830 B 18 V 3,0 Ah Akku- 1x Makita MAKPAC 3 Systemkoffer - 1x Universaleinlage- 1x Grasscherblatt 16 cm ( 195267-4 )- 1x Schnittgutsammler 16 cm ( 457426-1 )- 1x Scherblattschutz ( 452055-5 )- 1x Strauchscherblatt 20 cm ( 198408-1 )- 1x Schnittgutsammler 20 cm ( 198401-5 )- ohne LadegerätProduktbeschreibung:Diese Gras- und Strauchschere eignet sich zum schneiden von Gras und zum Formschnitt von Sträuchern. Das leichte und handliche Gerät ermöglicht den Rasenschnitt auch an schwer zugänglichen Stellen. Auch schwere Schnitte sind mit der hohen Hubzahl der DUM 604 kein Problem. Dank der Integrierten Akku-Kapazitätsanzeige haben Sie immer im blick, wie lange Sie noch problemlos Arbeiten können. Aufgrund des simplen Aufbaus der Maschine, ist Sie mit wenigen Handgriffen auf Grasschnitt umgerüstet. Gleiches gilt bei der Umrüstung auf Strauchschnitt. Der gummierte Handgriff lässt die Grasschere sicher in der Hand liegen. Die Messer sind beidseitig geschliffen, das Scherblatt ist rostfrei gearbeitet.Technische Daten:Hersteller: MakitaHerstellerbezeichnung: DUM 604Akkuspannung: 18 VGartenscherentyp: EinhandLeerlaufschlagzahl: 2500 min⁻¹Schalldruckpegel ( LpA ): 74 dB (A)K-Wert Geräusch: 3 dB (A)Vibration: < 2,5 m/s²K-Wert Vibration: 1,5 m/s²Schnittbreite Grasscherblatt: 16 cmSchnittbreite Strauchscherblatt: 20 cmBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!

  Read more less

  Pre-order

  €166,79

  Options

• 

  Options

  Makita Makita DTW 300 G1J cordless impact wrench 18 V 330 Nm 1/2" brushless + 1x rechargeable battery 6.0 Ah + Makpac - without charger

  Scope of Delivery: - 1x Makita DTW 300 cordless impact wrench - 1x belt clip - 1x Makita BL 1860 B 18 V - 6.0 Ah / 6000 mAh Li-Ion battery with LED display - 1x Makita Makpac - without charger Product Description: The Makita DTW 300 cordless impact wrench has a powerful brushless motor. One of the highlights of the impact wrench is the tightening torque of 330 Nm. Thanks to the four modes for different impact force levels, it is easy to work with different materials. The impact wrench also has three screwdriving modes, so loosening screws without damaging them unnecessarily is no longer a problem. The LED work light with afterglow function provides good lighting, making it easier to work in poor visibility conditions. The snap ring guarantees a quick and secure pick-up of tools. The Makita DTW 300 also has deep discharge protection. This switches the machine off automatically when the battery is almost empty. Thanks to the belt clip, which can be mounted on the right or left, the impact wrench can be quickly and securely attached to the belt. The Makita DTW 300 is perfect for jobs that require a high tightening torque, and thanks to its compatibility with Makita's 18 volt batteries, a wide range of accessories is available. Makita is a leading manufacturer of power tools that has won the trust of customers for years and is known worldwide for the high level of quality in the processing of tools. Technical Data: - Manufacturer: Makita - Manufacturer designation: DTW 300 - Hard torque: 70 / 130 / 180 / 330 Nm - Idle speed: 0-1000 / 1800 / 2600 / 3200 min-1 - Idle speed: 0-1800 / 2600 / 3400 / 4000 min-1 - External square drive: 1/2" - Standard screws: M10- M20 - High-strength screws: M10- M20 - Sound power level: 108 dB(A) - Sound pressure level: 97 dB(A) - K-value noise: 3 dB(A) - Vibration impact screws at full load: 12.5 m/s² - K-value vibration: 1.5 m/s² - Voltage: 18 V - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €335,66

  Options

• 

  Options

  Makita Makita DFR 550 G1J Akku Magazinschrauber 18 V 25 - 55 mm + 1x Akku 6,0 Ah + Makpac - ohne Ladegerät

  Lieferumfang: - 1x Makita DFR 550 Akku-Magazinschrauber- 2x Schraubereinsatz für Makita DFR 550- 1x Makita BL 1860 B 18 V -  6,0 Ah / 6000 mAh Li-Ion Akku mit LED - Anzeige ( 197422-4 )- 1x Makpac- 1x passende Einlage- ohne Ladegerät  Produktmerkmale: Dieser Akku-Schnellbau-Magazinschrauber aus dem Hause Makita eignet sich zur schnellen Verarbeitung von gurtmagazinierten Schrauben. Die Kupplung schaltet geräuschlos ab. Eine lange Schraubenführung verhindert zudem das Verkanten des Gurtes. Rechts- und Linkslauf sind möglich. Ein einstellbarer Tiefenanschlag ermöglicht unterschiedliche Schraubenlängen und eine hohe Drehzahl für einen effektiven Arbeitsfortschritt. Der 4-polige Motor in kompakter Bauform hat keinen Drehmomentverlust bei geringer Stromaufnahme. Technische Daten:Akkuspannung: 18 VLeerlaufdrehzahl: 4.000 min-1Schrauben: 4,0 mm x 25 - 55 mmGewicht: 2,1 kgSchalldruckpegel: 78 dB(A)Unsicherheit (K): 3 dB(A)Vibrationsemissionswert: 2,5 m/s2Unsicherheit (K): 1,5 m/s2  Bei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!

  Read more less

  Pre-order

  €369,85

  Options

• 

  Options

  Makita Makita DHS 710 MJ 36 V Akku Li-Ion Handkreissäge 190 mm + 2x Akku 4,0Ah + Makpac - ohne Ladegerät

  Lieferumfang:- 1x Makita DHS 710 36 Volt Akku Handkreissäge- 1x HM-Sägeblatt 190mm 12 Z ( B-02939 )- 1x Parallelanschlag- 1x Absaugstutzen- 1x Makita Makpac Gr. 4- 1x Einlage für Makpac- 2x BL1840B  4,0 Ah Akku- Ohne LadegerätProduktbeschreibung:Die Makita DHS 710 Handkreissäge überzeugt durch seinen umweltfreundlichen und kostensparenden 2x 18 V-Antrieb und der stufenlosen Winkeleinstellung bis zu 45°. Das Gerät eignet sich ideal zur Küchenmontage, zum Innenausbau und bei Dacharbeiten. Mit der Makita DHS 710 erreicht man mühelos eine Schnittiefe von bis zu 68,5 mm. Die Grundplatte besteht aus robustem Aluminium-Druckguss. Im Makpac kann die Maschine einfach transportiert und verstaut werden. Der Makita BL 1840 B Akku mit 4 Ah überzeugt mit maximierter Ausdauer bei gleichem Gewicht (im vergleich zu 3 Ah Akkus). Ein zusätzlicher Vorteil ist die kurze Ladezeit von nur 36 Minuten im Makita Ladegerät. Der Akku verfügt dank geringer Selbstentladung und Kurzschluß-, Überspannungs- und Überhitzungsschutz über maximale Lebensdauer. Zudem besitzt der BL 1840 B noch eine LED - Ladestandanzeige zum Überprüfen der Restenergie im Akku.Technische Daten: Leerlaufdrehzahl: 4.800 min-1Schnittleistung 0°/45°: 68,5/49 mmSägeblatt-Ø / Bohrung: 190/30 mmAkkuspannung: 2x 18 VMaße (LxBxH) mm: 356x217x298Gewicht(ohne Akku): 4,1 kgAkkukapazität: 4 AhAkkuspannung: 18 VLadezeit: ca. 36 MinutenGewicht Akku: 670 gBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!

  Read more less

  Pre-order

  €373,83

  Options

• 

  Makita Makita DGA 511 G1J cordless angle grinder 18V 125mm brushless + 1x rechargeable battery 6.0Ah + Makpac - without charger

  Sat, 12/06/2025

  Scope of Delivery: - 1x Makita DGA 511 cordless angle grinder - 1x Makita BL 1860 B 6.0 Ah rechargeable battery - 1x additional handle 158237-4 - 1x cutting disc A-80656 - 1x protective cover 123145-8 - 1x Clamping flange 224415-9 - 1x flange nut 224554-5 - 1x Face spanner 782423-1 - 1x Makita Makpac 3 - 1x Makita insert - without charger Product Description: The new battery-powered angle grinder from Makita is state of the art in every respect: The brushless electric motor utilises the battery charge even more efficiently and works with absolutely minimal wear. The speed and torque are automatically adapted to the situation. The speed can also be adjusted manually from 3000 to 8500 rpm. An electronic current limiter protects the motor from overloading, a warning light illuminates and the current flow to the motor is reduced. The angle grinder is protected against dust and splash water and is fitted with non-slip rubber pads on the housing. The Active Feedback sensing Technology (AFT) switches the DGA 511 off if the disc stops suddenly to protect the user from an abrupt swing of the device. An LED display on the angle grinder shows the current battery charge level at all times. Technical Data: - Battery power: 18 V - Grinding disc (Ø): 125 mm - Idle speed: 3,000-8,500 min-1 - Spindle thread: M14 x 2 - Weight: 2.5 kg - Dimensions (LxWxH): 368x140x151 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €264,38

• 

  Makita Makita DGA 511 F1J cordless angle grinder 18V 125mm brushless + 1x rechargeable battery 3.0Ah + Makpac - without charger

  Sat, 12/06/2025

  Scope of Delivery: - 1x Makita DGA 511 cordless angle grinder - 1x Makita BL 1830 B 3.0 Ah rechargeable battery - 1x additional handle 158237-4 - 1x cutting disc A-80656 - 1x protective cover 123145-8 - 1x Clamping flange 224415-9 - 1x flange nut 224554-5 - 1x Face spanner 782423-1 - 1x Makita Makpac 3 - 1x Universal insert - without charger Product Description: The new battery-powered angle grinder from Makita is state of the art in every respect: The brushless electric motor utilises the battery charge even more efficiently and works with absolutely minimal wear. The speed and torque are automatically adapted to the situation. The speed can also be adjusted manually from 3000 to 8500 rpm. An electronic current limiter protects the motor from overloading, a warning light illuminates and the current flow to the motor is reduced. The angle grinder is protected against dust and splash water and is fitted with non-slip rubber pads on the housing. The Active Feedback sensing Technology (AFT) switches the DGA 511 off if the disc stops suddenly to protect the user from an abrupt swing of the device. An LED display on the angle grinder shows the current battery charge level at all times. Technical Data: - Battery power: 18 V - Grinding disc (Ø): 125 mm - Idle speed: 3,000-8,500 min-1 - Spindle thread: M14 x 2 - Weight: 2.5 kg - Dimensions (LxWxH): 368x140x151 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €221,45

• 

  Options

  Makita Makita DGA 517 G1J Cordless angle grinder 18 V 125 mm brushless + 1x rechargeable battery 6.0 Ah + Makpac - without charger

  Scope of Delivery: - 1x Makita DGA 517 cordless angle grinder - 1x Makita 125 mm grinding disc ( A-80656 ) - 1x assembly tool - 1x additional handle - 1x protective cover - 1x Makita BL 1860 B 18 V 6.0 Ah battery - 1x Makita Makpac transport case - 1x Matching insert - without charger Product Description: The tool is designed for grinding, sanding and cutting metal and stone material without the use of water. The handy cordless angle grinder is suitable for cutting discs with a diameter of up to 125 mm. The brushless motor also ensures longer endurance and a longer service life for the device. Thanks to the Active Feedback sensing Technology (AFT), the motor stops immediately when the tool jams, thus protecting the worker and those around them from accidents. The Xtreme Protect Technology (XPT) also optimally protects the tool from dust and splash water. The angle grinder also features Automatic Torque Drive Technology (ADT), which adapts the speed to every requirement during operation in order to achieve optimum performance. A motor brake, soft start and electronically adjustable speed ensure optimum comfort and perfect working conditions. The non-lockable paddle switch increases safety in the workplace. The practical LED display warns of low battery voltage and overloading of the device. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DGA 517 - Battery voltage: 18 V - Grinding disc diameter: 125 mm - Bore: 22.23 mm - Idle speed: 3000 - 8500 min-l - Dimensions (LxWxH): 382 x 140 x 151 mm - Sound pressure level: 79 dB(A) - Uncertainty (K): 3 dB(A) - Vibration surface grinding: 5.5 - 6.0 m/s² - Vibration disc grinding: 2.5 m/s² or less - Uncertainty (K): 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €337,92

  Options

• 

  Options

  Makita Makita DTM 51 G1JX2 cordless multifunction tool 18 V + 1x rechargeable battery 6.0 Ah + 39-piece accessory set + Makpac - without charger

  Scope of Delivery: - 1 x Makita DTM 51 cordless multifunction tool - 1 x Makita BL1860 rechargeable battery 6.0 Ah - 1 x Makpac case - 1 x saw blade TMA017 10 mm (metal) - 1 x saw blade TMA012 32 mm (wood) - 1 x saw blade TMA010 32 mm (hard wood) - 1 x saw blade TMA009 28 mm (wood, metal) - 1 x saw blade TMA007 85 mm (wood) - 1 x saw blade TMA006 85 mm (wood, metal) - 1 x saw blade TMA019 52mm (multi material) - 1 x Delta sanding disc attachment - 10 x Delta sanding sheet K100 - 10 x Delta sanding sheet K150 - 10 x Delta sanding sheet K 60 - 1 x dust extraction attachment Product Description: The Makita DTM 51 ZJX2 is a cordless multi-function tool set. It has many different functions. It is ideal for working on wood, metal and plastic. The new blade fastening system allows the blades to be replaced without tools. The device also has a six-speed regulator. This allows the speed to be optimised depending on the material and requirements. Among other things, the tool can be used for grinding and sawing. Thanks to the compact design of the multi-tool, corners and edges can also be reached where a normal tool would be too large. Technical Data: - Operating voltage: 18V - Oscillations per minute: 6000-20000 - Pendulum angle, left/right: 1.6° (3.2° total) - Weight: 2.2 kg - Suitable for: Wood, metal, plastic - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €408,82

  Options

• 

  Options

  Makita Makita DGA 506 Y1J cordless angle grinder 18V 125mm brushless + 1x battery 1.5Ah + Makpac - without charger

  Scope of Delivery: - 1 x Makita DGA 506 Z 18 V Li-Ion brushless cordless angle grinder solo - 1 x Makita BL 1815 N 18V - 1.5 Ah / 1500 mAh Li-Ion battery - 1 x Makita Makpac 3 - 1 x Makita MakPac universal insert - 1 x Makita 125mm grinding disc A-80656 - 1 x assembly tool - 1 x additional handle - 1 x instruction manual - without charger Product Description: The Makita DGA 506 brushless cordless angle grinder is a very handy, 18 volt, Li-Ion battery-powered angle grinder for cutting discs up to 125 mm in diameter. The Automatic Speed Control automatically regulates high speeds for cutting work or high torque for grinding work, depending on requirements. The brushless motor from Makita's Brushless Technology ensures greater endurance, a longer service life and a more compact housing. The motor is also protected by overload protection and the DGA 506 also has a juice start. Technical Data: - Idle speed: 8,500 min-1 - Grinding disc diameter: 125 mm - Bore: 22.23 mm - Battery voltage: 18 V - Weight without battery: 1.6 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €229,39

  Options

• 

  Makita Makita DHR 171 G1J cordless hammer drill 18V 1,2J Brushless SDS Plus + 1x battery 6,0Ah + Makpac - without charger

  Sat, 12/06/2025

  Scope of Delivery: - 1x Makita DHR 171 cordless hammer drill - 1x side handle with depth stop - 1x Makita BL 1860 B 6.0 Ah rechargeable battery - 1x foam nap foam insert - 1x Makita Makpac III transport case - without charger Product Description: The tool is designed for hammer drilling and drilling in brick, concrete and stone. It is also suitable for normal drilling in wood, metal, ceramics and plastic. The 18 V cordless hammer drill DHR 171 from Makita impresses with its high performance despite its compact size. The device comes with a carbon brushless "brushless" motor, which works more efficiently than a conventional motor and is virtually wear-free. The housing of the device has been designed to absorb the vibration of the percussion mechanism and therefore guarantees comfortable working. The rotary hammer has a clutch that switches off silently and the motor allows a high speed for fast work progress. Handling is optimised by the handle with depth stop and the rubberised handle, guaranteeing a secure grip at all times. Technical Data: - Rated voltage: 18 V - Impact energy: 1.20 joules - Motor type: brushless - Tool holder: SDS plus - Idle speed: 0-680 1/min - Impact speed: Max. 0-4800 1/min - Drill diameter concrete: Ø 17 mm - Drill diameter wood: Ø 13 mm - Drill diameter steel: Ø 10 mm - Weight without battery: 1700 g - Sound pressure level: 86 dB (A) - Sound power level: 97 dB (A) - Measurement uncertainty (K): 3 dB (A) - Vibration emission (drilling metal): 2.5 m/s2 or less - Vibration emission (hammer drilling in concrete): 9.0 m/s2 - Measurement uncertainty (K): 1.5 m/s2 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €273,67

• 

  Makita Makita DFS 250 M1J cordless drywall screwdriver 18 V brushless + 1x rechargeable battery 4.0 Ah + Makpac - without charger

  Sat, 12/06/2025

  Scope of Delivery: - 1x Makita DFS 250 cordless drywall screwdriver - 1x belt clip - 1x Phillips PH2 bit - 1x magnetic holder 1/4" 60 mm - 1x Makita BL 1840 B 18 V 4.0 Ah rechargeable battery - 1x Makita Makpac - 1x universal insert - without charger Product Description: This brushless cordless drywall screwdriver DFS 250 from Makita is particularly suitable for drywall construction. This screwdriver is easy to handle thanks to the precise, very light depth setting that can be adjusted with one hand. The Push&Drive technology ensures that the motor only starts in lock-out mode when the screwdriver bit is engaged and pressure is applied. This ensures a quieter working environment and helps to conserve battery power. The built-in brushless motor works without carbon brushes. This means that the device requires no maintenance and has low energy consumption. The battery also lasts longer. This compact, lightweight and ergonomic machine has a switch lock for continuous operation and a magnetic insert holder. There is also a depth adjustment for easy screwing. An ergonomic handle with soft coating ensures a high level of working comfort. A powerful, photoluminescent LED light is also installed. It works in clockwise and anti-clockwise rotation and the speed is infinitely adjustable. Makita is a leading manufacturer of power tools, characterised by a long tradition and the highest quality standards. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DFS 250 - Battery voltage: 18 V - Speed: 0 - 2500 rpm - Self-tapping screws max: 6 mm Ø - Chipboard screw max: 5 mm Ø - Tool holder (hexagon socket): 1/4" - Sound pressure level: 72 dB(A) - Factor K (sound): 3 dB (A) - Vibrations: 2.5 m/s^2 - Factor K (vibrations): 1.5 m/s^2 - Weight ( device only ): 1.5 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €275,91

Show more products