Solo Elektrowerkzeuge 18V - Makita

Show previous products

• 

  Options

  Makita Makita DHP 453 Z cordless impact drill 18V 42Nm solo + 100 pcs. bit, drill & socket set without battery, without charger

  Scope of Delivery: - 1x Makita DHP 453 18 V Li-Ion cordless impact drill solo - 1x Makita P 90249 100-piece bit, drill & socket spanner set in case - without battery, without charger Product Description: The Makita DHP 453 Solo cordless impact wrench has an impact mechanism that can be switched off, clockwise/anticlockwise rotation and electronic speed control. The torque can be set in 16 stages plus a drilling stage. The rubberised, ergonomic handle and compact design guarantee a secure grip and comfortable working. The 100-piece bit and drill bit set from Makita leaves almost nothing to be desired. With a total of 50 bits in 4 different holders, a range of drill bits, socket spanners, hole saws and some special parts, you will always find the right accessory in the P 90249 Technical Data: - Rated voltage: 18 volts - Idle speed 1st gear: 0 - 400 rpm - Idle speed 2nd gear: 0 - 1300 rpm - Idle speed 1st gear: 0 - 6,000 rpm - Idle speed 2nd gear: 0 - 19,000 min-1 - Drill chuck clamping width: 1.5 - 13 mm - Drill diameter wood: Ø 36 mm - Drill diameter steel: Ø 13 mm - Drill diameter masonry: Ø 13 mm - Torque max: 42 Nm - Torque min: 27 Nm - Total length: 214 mm - 30x 25mm screwdriver bits - 5x Pozi : PZ1 , PZ2 x 3pc , PZ3 - 3x Philips: PH1 , PH2 , PH3 - 8x Slot : 3, 4mm x 2pcs , 5, 5,5 mm x 2pcs , 6,5 mm x 2pcs - 10x Torx : T8 x 2pc , T10x 2pc , T15 , T20 , T25 , T27 , T30 , T40 - 4x Hex: 3, 4 , 5, 6 mm - 20x 50mm screwdriver bits - 7x Torx: T10, T15, T20, T25, T27, T30, T40 - 6x Pozi : PZ1 x 2pc , PZ2x 2pc , PZ3 x 2pcs - 3x Slot : 4 , 5,5, 6,5 mm - 4x Hex: 3, 4 , 5, 6 mm - 13x Nutdrivers : 4 , 5, 6,7 , 8, 9 mm , 10, 11 , 12, 13mm, 1/4 " , 5/16 ", 3/ 16 " - 1x hexagon socket spanner : 2.5 mm - 6 x HSS drill bits : 4, 5, 5.5, 6, 6.5, 7 mm - Masonry 6 x wood drill bits : 4.5 , 5.5, 6 , 6.5, 7 mm - 6x Brad point wood boringbits : 4 , 5, 5.5 , 6, 6.5,7 mm - 3x flat bit: 10, 16, 18 mm - 1x 60mm bit holder - 4x Drill Stopper : 6, 8,10 , 12 mm - 1x drill measuring device - 4x hole saws : 32, 38, 45,54 mm - 1x Arbor adapter - 1x bit driver with magnetictip - 1x 25mm screwdriver bits: PZ2 - 1x centring punch - 1x countersink - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €97,10

  Options

• 

  Options

  Makita Makita DSP 600 ZJ cordless plunge-cut saw 36V (2x 18V) brushless + rip fence ( 165447-6 ) + Makpac - without battery, without charger

  Scope of Delivery: - 1x Makita DSP 600 Z cordless plunge-cut saw - 1x Makita carbide saw blade D 165 mm - 1x Makita rip fence for cordless plunge-cut saw and panel cutter ( 165447-6 ) - 1x Makita Makpac size 4 - 1x universal insert - without battery, without charger Product Description: The power tool is specially designed for making plunge cuts. The tool is also intended for longitudinal and cross cuts in wood. If the tool is fitted with a regular circular saw blade, it can be used for sawing aluminium, plastic, mineral plastic and similar materials. The cordless plunge-cut saw impresses with its brushless motor, which stands for increased endurance, longer service life, more compact design and increased performance. The plunge-cut circular saw has an adjustable speed, constant electronics, soft start and overload protection, which protects the motor. The circular saw has automatic torque drive technology that automatically regulates the speed during operation to achieve optimum performance depending on requirements. The plunge-cut saw has a quick angle setting for -1°, 22.5° and a quick preselection of 45° or 48° as the maximum tilt angle. The cutting point remains in exactly the same position for all angle settings. The scribing mode ensures a tear-free cut. Even at the highest tilt angle, the DSP 600 does not tip off the guide rail. The saw is compatible with Makita guide rails. The Makita rip fence is essential for precise cutting results. The high quality of workmanship from Makita ensures a long service life. The rip fence is compatible with the CA 5000 panel saw and the DSP 600, DSP 601, SP6 000 and SP 6000 cordless plunge-cut saws. Technical Data: - Battery voltage: 36V (2x18V) - Motor product type: brushless - Saw blade Ø / bore: 165x20 mm - Max. Mitre left / right: 0/48 ° - Max. Cutting capacity 90°: 56 mm - Max. Cutting capacity 45°: 40 mm - Max. Cutting capacity 48°: 38 mm - Idle speed: 2500-6300 min-1 - Saw blade Ø / bore: 165/20 mm - Dimensions (LxWxH): 346x241x272 mm - Net weight: 4.4 - 5.1 kg - Sound pressure level: 92 dB(A) - Sound power level: 103 dB(A) - Uncertainty (K): 3 dB(A) - Vibration emission (cutting wood): 2.5 m/s2 or less - Vibration emission (cutting metal): 2.5 m/s2 or less - Measurement uncertainty (K): 1.5 m/s - Manufacturer: Makita - Manufacturer number: 165447-6 - Material: Steel - Colour: Black - Compatible: CA 5000, DSP 600, DSP 601, SP 6000, SP 6000 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €458,12

  Options

• 

  Makita Makita DRS 780 Z Cordless circular saw 36V ( 2x18V ) 185 mm Brushless Solo - without battery, without charger

  5 Reviews

  Fri, 12/05/2025

  Scope of Delivery: - 1x Makita DRS 780 Z cordless circular saw 36V ( 2x18V ) 185 mm - 1x Makita circular saw blade - 1x hexagon spanner 5 mm - without battery, without charger Product Description: The Makita DRS 780 cordless circular saw impresses with its short and compact design. It achieves a maximum cutting depth of 65 mm with the 185 mm saw blade. The rear handle and additional handle ensure precise guidance. The machine's deep charge protection protects the batteries; when the portable circular saw realises that the batteries are almost empty, it switches off automatically. The left-sided positioning of the saw blade provides an optimum view of the cutting line. The speed of the machine is automatically regulated and thus perfectly adapted to the workpiece (ADT Automatic torque Drive Technology). The ADT display indicates an overload of the hand-held circular saw by flashing. The DRS 780 also has an easy-to-read scale and clear angle markers. Thanks to Xtreme Protection Technology (XPT), the DRS 780 is protected against dust and splash water, even under harsh conditions. Technical Data: - Max. Cutting capacity 90°: 65 mm - Max. Cutting capacity 45°: 45 mm - Max. Mitre left / right: 53/0 ° - Idle speed: 5100 min-¹ - Product dimensions (L x W x H): 446 x 196 x 270 mm - Saw blade Ø / bore: 185x30 mm - Sound power level (LWA): 103 dB(A) - Sound pressure level (LpA): 92 dB(A) - K-value noise: 3 dB(A) - Vibration: ≤2.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €301,44

• 

  Makita Makita DHS 782 ZJ Cordless Circular Saw 36V (2x18V) 190 mm Brushless Solo in Makpac - without battery, without charger

  7 Reviews

  Fri, 12/05/2025

  Scope of Delivery: - 1x Makpac size 4 ( 821552-6 ) - 1x Specialised saw blade 190x30x24T (B-64191) - 1x rip fence ( 164095-8 ) - 1x dust extraction nozzle ( 196520-1 ) - 1x 6-KT pin spanner 6mm ( 783204-6 ) Product Description: This practical hand-held circular saw from Makita has built-in ADT (Automatic Torque Drive Technology). During operation, the speed is automatically regulated to achieve optimum performance depending on requirements. Thanks to the indicator light coupled with ADT, you are warned in good time before the machine is overloaded as soon as it starts flashing. The DHS 782 also has a new base plate made of lightweight magnesium, which can be coupled directly to a guide rail. With this device, you always have an optimised view thanks to the change of position of the front handle. There is also an electric motor brake. The brushless motor ensures greater endurance, a longer service life and a more compact design. The tilt is adjustable up to 48 degrees. The XPT - Xtreme Protect Technology offers optimum protection against dust and splash water, even under tough conditions. The bright double LED ensures a good view of the scribing line. Technical Data: - Manufacturer number: DHS782ZJ - Idle speed: 6,000 min-1 - Cutting capacity 0°: 62.5 mm - Cutting capacity 45°: 46 mm - Cutting capacity 48°: 43.5 mm - Saw blade Ø / bore: 190/30 mm - Battery voltage: 2x18 V - Dimensions (LxWxH) mm: 348 x 210 x 290 - Weight: 3950g - Sound pressure level (LpA): 93 dB(A) - Sound power level (LWA): 104 dB(A) - K-value noise: 3 dB(A) - Vibration sawing wood: 2.5 m/s² - Vibration sawing metal: 2.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €306,49

• 

  Options

  Makita Makita DHR 202 ZE Akku Kombihammer 18V 2,0J SDS Plus Solo in Makpac - ohne Akku, ohne Ladegerät

  Lieferumfang:- 1x Makita DHR 202 18 V Li-ion Akku Kombihammer - 1x Makpac Einlage für DHR 202- 1x Zusatzgriff- 1x Tiefenanschlag- ohne Akku, ohne LadegerätProduktmerkmaleDer 18 V Akku Kombihammer DHR 202 von Makita überzeugt mit hoher Leistung trotz kompakter Maschine. Der Kombihammer verfügt über eine geräuschlos abschaltende Kupplung und mit dem Motor ist eine hohe Drehzahl für schnellen Arbeitsvortschritt möglich. Das Handling ist durch den Handgriff mit Tiefenanschlag und den gummierten Handgriff optimiert und garantiert sicheren Halt und komfortables Arbeiten. Mit der Einlage für das Makpac kann die Maschine einfach transportiert und verstaut werden. Technische Daten: Leerlaufdrehzahl: 1.100 1/min Nennspannung: 18 V Schlagzahl: Max. 4.000 1/min Einschlagenergie: 2,0 JouleØ 20 mm Bohrdurchmesser BetonØ 26 mm Bohrdurchmesser HolzØ 13 mm Bohrdurchmesser StahlMotorbremseRechts-/LinkslaufSpotlightBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!

  Read more less

  Pre-order

  €160,32

  Options

• 

  Options

  Makita Makita DSP 600 ZJ cordless plunge-cut saw 36V (2x 18V) brushless + 2x guide rail + screw clamps + guide rail connector + rip fence ( 165447-6 ) + Makpac - without battery, without charger

  Scope of Delivery: - 1x Makita DSP 600 Z cordless plunge-cut saw - 1x Makita HM saw blade D 165 mm - 2x Makita guide rail 1000 mm ( 199140-0 ) - 1x Makita screw clamps 1 pair/2 pieces ( 194385-5 ) for Makita guide rail 194368-5 - 1x Makita rip fence for cordless plunge-cut saw and panel router ( 165447-6 ) - 1x Makita Makpac size 4 - 1x universal insert - 2x Makita guide rail connector - 1x pin spanner 6-KT - without battery, without charger Product Description: The power tool is specially designed for making plunge cuts. The tool is also intended for longitudinal and cross cuts in wood. If the tool is fitted with a regular circular saw blade, it can be used for sawing aluminium, plastic, mineral plastic and similar materials. The cordless plunge-cut saw impresses with its brushless motor, which stands for increased endurance, longer service life, more compact design and increased performance. The plunge-cut circular saw has an adjustable speed, constant electronics, soft start and overload protection, which protects the motor. The circular saw has automatic torque drive technology that automatically regulates the speed during operation to achieve optimum performance depending on requirements. The plunge-cut saw has a quick angle setting for -1°, 22.5° and a quick preselection of 45° or 48° as the maximum tilt angle. The cutting point remains in exactly the same position for all angle settings. The scribing mode ensures a tear-free cut. Even at the highest tilt angle, the DSP 600 does not tip off the guide rail. The saw is compatible with Makita guide rails. The Makita rip fence is essential for precise cutting results. The high quality of workmanship from Makita ensures a long service life. The rip fence is compatible with the CA 5000 panel saw and the DSP 600, DSP 601, SP6 000 and SP 6000 cordless plunge saws. Enables optimum working with the guide rail for plunge saws, circular saws and routers: Made from an extruded aluminium construction, the guide rail is ideal for use with various materials. It has a replaceable splinter guard, is non-slip and can be combined with the upper running strips for longer lengths. The splinter guard is transparent and therefore not visible on the guide rail. The screw clamps from Makita are particularly robust and durable. They are made from all-steel and are powerful and ideal for Makita guide rails and plunge-cut saws. The throat depth is 100 mm and the clamping width is 185 mm. The Makita guide rail connectors make it easy to connect two or more rails with a perfect fit. The guide rail connectors disappear completely into the guide rail so that the machine can glide smoothly over it. A secure and firm hold is guaranteed by screwing the guide rail connectors into the guide rail. Technical Data: - Battery voltage: 36V (2x18V) - Motor product type: brushless - Saw blade Ø / bore: 165x20 mm - Max. Mitre left / right: 0/48 ° - Max. Cutting capacity 90°: 56 mm - Max. Cutting capacity 45°: 40 mm - Max. Cutting capacity 48°: 38 mm - Idle speed: 2500-6300 min-1 - Saw blade Ø / bore: 165/20 mm - Dimensions (LxWxH): 346x241x272 mm - Net weight: 4.4 - 5.1 kg - Sound pressure level: 92 dB(A) - Sound power level: 103 dB(A) - Uncertainty (K): 3 dB(A) - Vibration emission (cutting wood): 2.5 m/s2 or less - Vibration emission (cutting metal): 2.5 m/s2 or less - Measurement uncertainty (K): 1.5 m/s - Manufacturer: Makita - Manufacturer number: 165447-6 - Material: Steel - Colour: Black - Compatible: CA 5000, DSP 600, DSP 601, SP 6000, SP 6000 - Item number 199140-0 - Item weight 2.34 kg - Product dimensions 24.8 x 108 x 4.4 cm - Span: 185 mm - Projection: 100 mm - Rail: 15 x 5 mm - Material: steel - Package contents: 2 pcs. - Manufacturer number: 198885-7 - Quantity: 2 - Material: Steel - Colour: Black - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €587,27

  Options

• 

  Options

  Makita Makita BHR 202 Z Akku Kombihammer 18V 2,0J SDS Plus in Koffer - ohne Akku, ohne Ladegerät

  Lieferumfang:- 1x Makita BHR 202 18 V Li-ion Akku Kombihammer in Koffer- 1x Zusatzgriff- 1x TiefenanschlagProduktmerkmaleDer 18 V Akku Kombihammer BHR 202 von Makita überzeugt mit hoher Leistung trotz kompakter Maschine. Der Kombihammer verfügt über eine geräuschlos abschaltende Kupplung und mit dem Motor ist eine hohe Drehzahl für schnellen Arbeitsvortschritt möglich. Das Handling ist durch den Handgriff mit Tiefenanschlag und den gummierten Handgriff optimiert und garantiert sicheren Halt und komfortables Arbeiten.  Technische Daten: 1.100 1/min Leerlaufdrehzahl18 V NennspannungMax. 4.000 1/min SchlagzahlEinschlagenergie 2,0 JouleØ 20 mm Bohrdurchmesser BetonØ 26 mm Bohrdurchmesser HolzØ 13 mm Bohrdurchmesser Stahl3 Ah Akkukapazität22 min LadedauerMotorbremseRechts-/LinkslaufSpotlightBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!

  Read more less

  Pre-order

  €193,87

  Options

• 

  Options

  WellCut Makita DTM 51 Z cordless multifunction tool 18V Solo + 4x saw blade - without battery, without charger

  Scope of Delivery: - 1x Makita DTM 51 18V Li-ion cordless multifunction tool - 1x 34mm bi-metal saw blade W34BM WOOD AND METAL - 2x 34 mm wood saw blade W34HCS WOOD AND PLASTIC - 1x 34 mm Japanese wood saw blade WJ34HCS WOOD - without battery, without charger, without case Product Description: The Makita DTM 51 multifunction tool allows the insert tools to be changed without tools and is ideal for sawing, cutting and sanding. The extensive range of insert tools ensures an extremely wide range of applications for the multifunction tool. The Makita DTM 51 also has an electronically adjustable oscillation speed, as well as a juice start and restart protection. The tool blade set includes a selection of the most commonly used saw blades for wood, metal, polystyrene, non-ferrous metals and plastic. The Long Life feature promises a long service life and a long service life. Technical Data: - Makita DTM 51 18V Li-ion cordless multifunction tool - Idle oscillation: 6,000 - 20,000 min-1 - Oscillation angle: 3.2 ° - Battery voltage: 18 V - Dimensions (LxWxH) mm: 326x80x122 - Weight: 2.2 kg - Sound pressure level (LpA): 81 dB(A) - Sound power level (LWA): 92 dB(A) - K-value noise: 3 dB(A) - Vibration sawing wood: 7.0 m/s² - Vibration sanding: 3.0 m/s² - K-value vibration: 1.5 m/s² - WellCut MT-4 Multi Tool tool blade set 4-piece Universal accessories OIS Long Life - Dimensions (LxWxH): 10x10x10 cm - Compatibility: e.g. DTM50Z, DTM51Z, DCS355N, TM3010CK - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €153,95

  Options

• 

  Options

  Makita Makita DSS 610 ZE cordless circular saw 18V 165 mm solo - without battery, without charger

  Scope of Delivery: - 1x Makita DSS610 cordless circular saw - 1x suitable insert for DSS 610 - without battery, without charger Product Description: The power tool is suitable for longitudinal and cross cuts as well as mitre cuts with angles in wood. The cordless portable circular saw impresses with its low weight and powerful cutting performance. The angle adjustment from 0°-50° is infinitely variable and the machine's cooling air ensures that the cutting surface remains free of chips and dust. The handle with inlaid rubber pad guarantees a secure grip and comfortable working, while the integrated LED also illuminates the workplace. The insert for the Makpac makes the machine easy to transport and store. Technical Data: - Voltage: 18V - Saw blade diameter: 165 mm - Max. Idle speed: 0-3700 rpm - Saw blade bore: 20 mm - Cutting capacity at 0°: 57 mm - Cutting capacity at 45°: 40 mm - Cutting capacity at 50°: 36 mm - Sound pressure level: 78 dB(A) - Uncertainty (K): 3 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €183,62

  Options

• 

  Makita Makita DJN 161 ZJ 18V Cordless Nibbler Shears Solo + Makpac - without battery, without charger

  Fri, 12/05/2025

  Scope of Delivery: - 1x Makita DJN 161 18V cordless nibbling shears - 1x Makita Makpac size - 1x universal insert - without battery, without charger Product Description: The handy Makita DJN cordless nibbler is ideal for cutting sheet metal, corrugated and trapezoidal sheet metal. The infinitely adjustable die can be rotated through 360° and has a 90° locking mechanism. An in-built LED warns of both diminishing battery voltage and possible overloading of the device. The anti-restart function prevents the nibbler from starting unintentionally after a battery change. Thanks to the slim design, even workpieces that are difficult to reach pose no problem. The measuring groove allows the sheet thickness to be measured before starting work so that the machine can be ideally aligned with the workpiece. Technical Data: - Battery voltage: 18 V - Cuts per minute: 1,900 min-1 - Cutting capacity 200 N/mm²: 2.5 mm - Cutting capacity 800 N/mm²: 0.8 mm - Smallest cutting radius: 50 mm - Plunge diameter: 22 mm - Weight without battery: 1.6 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €291,97

• 

  Options

  Makita Makita DGA 900 ZKX2 cordless angle grinder 36V ( 2x18V ) 230mm brushless solo + Ezynut + 5x cutting disc + case - without battery, without charger

  Scope of Delivery: - 1x Makita DGA 900 ZKX2 cordless angle grinder - 1x rubberised handle - 1x metal protective cover - 1x face spanner - 1x super flange - 1x Ezynut - 1x Makita transport case - 1x Operating instructions - 5x Bosch universal diamond cutting disc for angle grinder DIA-TS 230 x 22, 23 mm ( 2608615065 ) - without battery, without charger Product Description: The Makita DGA 900 ZKX2 is a powerful cordless angle grinder. The built-in BL motor (brushless) is designed for more endurance and a longer service life - with a compact design. The device is environmentally friendly and cost-saving with a 2x 18 V battery drive. The new ADT technology automatically regulates the speed during operation. This allows the power to be dynamically and optimally adjusted according to requirements. Makita has also equipped the tool with Active Feedback Technology, which automatically stops the motor if the tool jams, thus protecting it from serious damage. Other convenient functions include the restart interlock, electronic overload protection and soft start. The handle is decoupled to minimise the transmission of vibrations to the user. Technical Data: - Battery voltage: 2x 18 volts - Idle speed: 6,000 rpm - Grinding disc diameter: 230 mm - Bore: 22.23 mm - Weight: 8 kg - Sound pressure level: 88dB (A) - Sound power: 99 dB (A) - Watt: 1,500 W - Cutting discs: - Diameter: 230 mm - Bore diameter: 22.23 mm - Cutting width: 2.6 mm - Segment height: 10 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €387,67

  Options

• 

  Makita Makita DGA 504 ZE cordless angle grinder 18V 125mm brushless solo + 1x insert for Makpac - without battery, without charger

  Fri, 12/05/2025

  Scope of Delivery: - 1 x Makita DGA 504 Z 18 V Li-Ion cordless angle grinder solo - 1 x Makita 125mm grinding disc A-80656 - 1 x assembly tool - 1 x additional handle - 1 x Operating instructions - 1 x Makita MakPac insert - without battery, without charger, without Makpac Product Description: The Makita DGA 504 is a very handy, 18 volt, Li-Ion battery-powered angle grinder for cutting discs up to 125 mm in diameter. The AutomaticSpeedControl automatically regulates high speeds for cutting work or high torque for grinding work, depending on requirements. The brushless motor from Makita's Brushless Technology ensures greater endurance, a longer service life and a more compact housing. A restart lock prevents unintentional starts after the battery has been replaced, and an integrated LED warns of decreasing battery voltage and overload. The motor is also protected by overload protection. The machine also has a juice start. The insert for the Makpac makes the machine easy to transport and store. Technical Data: - Idle speed: 8,500 min-1 - Sanding disc diameter: 125 mm - Bore: 22.23 mm - Battery voltage: 18 V - Dimensions (LxWxH) mm: 350x141x130 - Weight: 2.3 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €142,64

Show more products