Makita

Scope of Delivery: - 1x Makita DCL 182 cordless hoover - 5x hoover bag - 1x Makita BL 1840 B 18 V 4.0 Ah battery - without charger Product Description: The Makita DCL 182 is a powerful 18 V cordless hoover which is ideal for cleaning upholstered furniture, stairs or the workshop. This low-noise hoover with high suction power and two power levels can be used with either a paper or textile dust bag. Thanks to the battery capacity indicator, you can always keep an eye on the remaining power. Technical Data: - Battery voltage: 18 Volt - Air volume: 1.4 m³/min - Vacuum pressure: 54 mbar - Capacity (dust bag): 0.5 litres - Capacity (paper bag): 0.33 litres - Suction power level 1: 11 W - Suction power level 2: 30 W - Suction time level 1: 40 min - Suction time level 2: 20 min - Dimensions (LxWxH): 1004x115x151 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DCL 182 cordless hoover - 5x hoover bag - 1x Makita BL 1850 B 18 V 5.0 Ah battery - 1x Makita DC 18 RC charger Product Description: The Makita DCL 182 is a powerful 18 V cordless hoover which is ideal for cleaning upholstered furniture, stairs or the workshop. This low-noise hoover with high suction power and two power levels can be used with either a paper or textile dust bag. Thanks to the battery capacity indicator, you can always keep an eye on the remaining power. Technical Data: - Battery voltage: 18 Volt - Vacuum: 54 mbar - Capacity with paper bag: 0.33 litres - Capacity with dust bag: 0.5 litres - Air volume: 1.4 m³/min - Suction power level 1: 11 W - Suction power level 2: 30 W - Suction time level 1: 40 min - Suction time level 2: 20 min - Dimensions (LxWxH): 1004x115x151 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita suitable insert for circular handsaw HS 7601 Product Description: Suitable Makita insert for your HS 7601 hand-held circular saw. The insert is suitable for all MAKPAC' S. For the HS 7601 hand-held circular saw, however, it only fits MAKPAC 4. Technical Data: - Material: Plastic - Length x width x height: 265 mm x 380 mm x 95 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Package contents: - 1x Makita MAKPAC 4 Case + insert for HS 7601 circular saw Product description: The MAKPAC case system from Makita provides safe and accessible storage of tools and accessories. These cases are also easy to stack, fix and transport. The MAKPAC 4 transport case is supplied with an insert for the HS 7601 circular saw. Technical specifications: Material: plastic Length x width x height: 390 x 290 x 310

Read more less

Scope of Delivery: - 1x Makita DHP 492 cordless impact drill - 1x depth stop ( 122576-8 ) - 1x side handle with extension ( 122F12-0 ) - 2x Makita BL 1860 B 18 V 6.0 Ah rechargeable battery - 1x Makita DC 18 RC battery quick charger - 1x Makita MAKPAC system case - 1x universal insert Product Description: The Makita DHP 492 cordless impact drill driver is a powerful and compact machine for professional use. Equipped with 18 volts and a brushless motor, it impresses with its high efficiency and durability. The switchable impact mechanism enables flexible working depending on the application. With a maximum torque of 141 Nm - as well as 130 Nm for hard and 65 Nm for soft screwdriving - it offers sufficient power reserves for demanding tasks. The torque can be precisely adjusted in 21 stages plus a drilling stage. The features include a robust metal quick-action drill chuck, a side handle for better control and a bright double LED with pre-glow and afterglow function for optimum visibility even in dark working areas. The integrated deep discharge protection switches the tool off automatically when the battery is almost empty, while the electronic overload protection provides additional safety. An electronic brake ensures maximum efficiency and user protection. Thanks to the compact and lightweight design, fatigue-free working is supported even during long periods of use. Technical Data: - Manufacturer : Makita - Manufacturer designation : DHP 492 - Battery voltage: 18 V - Battery type: Li-ion - Idle speed: 0 - 550 / 2100 min-¹ - Torque hard/soft: 130 / 65 Nm - Locking torque: 141 Nm - Torque settings: 21 - (Idle) impact speed: 0 - 8250 / 31500 min-¹ - Drilling capacity in masonry: 16 mm - Drilling capacity in steel: 13 mm - Drilling capacity in wood (auger drill): 50 mm - Drilling capacity in wood (Forstner bit): 76 mm - Drilling capacity with flat milling drills: 40 mm - Drilling capacity with hole saws:: 152 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Motor brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value), drilling in metal: 1.5 m/s² - Vibration values, impact drilling in concrete: 8.6 m/s² - Vibration uncertainty factor (K value), impact drilling in concrete: 1.5 m/s² - Sound power level (LWA): 95 dB(A) - Sound pressure level (LpA): 87 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 180 x 81 x 265 mm - Weight incl. battery: 2.3 - 2.7 kg - Product weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 492 cordless impact drill driver - 1x depth stop ( 122576-8 ) - 1x side handle with extension ( 122F12-0 ) - 1x Makita BL 1830 B 18 V 3.0 Ah rechargeable battery - 1x Makita DC 18 RC battery quick charger - 1x Makita MAKPAC system case - 1x universal insert Product Description: The Makita DHP 492 cordless impact drill driver is a powerful and compact machine for professional use. Equipped with 18 volts and a brushless motor, it impresses with its high efficiency and durability. The switchable impact mechanism enables flexible working depending on the application. With a maximum torque of 141 Nm - as well as 130 Nm for hard and 65 Nm for soft screwdriving - it offers sufficient power reserves for demanding tasks. The torque can be precisely adjusted in 21 stages plus a drilling stage. The features include a robust metal quick-action drill chuck, a side handle for better control and a bright double LED with pre-glow and afterglow function for optimum visibility even in dark working areas. The integrated deep discharge protection switches the tool off automatically when the battery is almost empty, while the electronic overload protection provides additional safety. An electronic brake ensures maximum efficiency and user protection. Thanks to the compact and lightweight design, fatigue-free working is supported even during long periods of use. Technical Data: - Manufacturer : Makita - Manufacturer designation : DHP 492 - Battery voltage: 18 V - Battery type: Li-ion - Idle speed: 0 - 550 / 2100 min-¹ - Torque hard/soft: 130 / 65 Nm - Locking torque: 141 Nm - Torque settings: 21 - (Idle) impact speed: 0 - 8250 / 31500 min-¹ - Drilling capacity in masonry: 16 mm - Drilling capacity in steel: 13 mm - Drilling capacity in wood (auger drill): 50 mm - Drilling capacity in wood (Forstner bit): 76 mm - Drilling capacity with flat milling drills: 40 mm - Drilling capacity with hole saws:: 152 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Motor brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value), drilling in metal: 1.5 m/s² - Vibration values, impact drilling in concrete: 8.6 m/s² - Vibration uncertainty factor (K value), impact drilling in concrete: 1.5 m/s² - Sound power level (LWA): 95 dB(A) - Sound pressure level (LpA): 87 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 180 x 81 x 265 mm - Weight incl. battery: 2.3 - 2.7 kg - Product weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 492 cordless impact drill - 1x depth stop ( 122576-8 ) - 1x side handle with extension ( 122F12-0 ) - 1x Makita BL 1840 B 18 V 4.0 Ah rechargeable battery - without charger Product Description: The Makita DHP 492 cordless impact drill driver is a powerful and compact machine for professional use. Equipped with 18 volts and a brushless motor, it impresses with its high efficiency and durability. The switchable impact mechanism enables flexible working depending on the application. With a maximum torque of 141 Nm - as well as 130 Nm for hard and 65 Nm for soft screwdriving - it offers sufficient power reserves for demanding tasks. The torque can be precisely adjusted in 21 stages plus a drilling stage. The features include a robust metal quick-action drill chuck, a side handle for better control and a bright double LED with pre-glow and afterglow function for optimum visibility even in dark working areas. The integrated deep discharge protection switches the tool off automatically when the battery is almost empty, while the electronic overload protection provides additional safety. An electronic brake ensures maximum efficiency and user protection. Thanks to the compact and lightweight design, fatigue-free working is supported even during long periods of use. Technical Data: - Manufacturer : Makita - Manufacturer designation : DHP 492 - Battery voltage: 18 V - Battery type: Li-ion - Idle speed: 0 - 550 / 2100 min-¹ - Torque hard/soft: 130 / 65 Nm - Locking torque: 141 Nm - Torque settings: 21 - (Idle) impact speed: 0 - 8250 / 31500 min-¹ - Drilling capacity in masonry: 16 mm - Drilling capacity in steel: 13 mm - Drilling capacity in wood (auger drill): 50 mm - Drilling capacity in wood (Forstner bit): 76 mm - Drilling capacity with flat milling drills: 40 mm - Drilling capacity with hole saws:: 152 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Motor brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value), drilling in metal: 1.5 m/s² - Vibration values, impact drilling in concrete: 8.6 m/s² - Vibration uncertainty factor (K value), impact drilling in concrete: 1.5 m/s² - Sound power level (LWA): 95 dB(A) - Sound pressure level (LpA): 87 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 180 x 81 x 265 mm - Weight incl. battery: 2.3 - 2.7 kg - Product weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 492 cordless impact drill driver - 1x depth stop ( 122576-8 ) - 1x side handle with extension ( 122F12-0 ) - 1x Makita BL 1840 B 18 V 4.0 Ah rechargeable battery - 1x Makita MAKPAC system case - 1x universal insert - without charger Product Description: The Makita DHP 492 cordless impact drill driver is a powerful and compact machine for professional use. Equipped with 18 volts and a brushless motor, it impresses with its high efficiency and durability. The switchable impact mechanism enables flexible working depending on the application. With a maximum torque of 141 Nm - as well as 130 Nm for hard and 65 Nm for soft screwdriving - it offers sufficient power reserves for demanding tasks. The torque can be precisely adjusted in 21 stages plus a drilling stage. The features include a robust metal quick-action drill chuck, a side handle for better control and a bright double LED with pre-glow and afterglow function for optimum visibility even in dark working areas. The integrated deep discharge protection switches the tool off automatically when the battery is almost empty, while the electronic overload protection provides additional safety. An electronic brake ensures maximum efficiency and user protection. Thanks to the compact and lightweight design, fatigue-free working is supported even during long periods of use. Technical Data: - Manufacturer : Makita - Manufacturer designation : DHP 492 - Battery voltage: 18 V - Battery type: Li-ion - Idle speed: 0 - 550 / 2100 min-¹ - Torque hard/soft: 130 / 65 Nm - Locking torque: 141 Nm - Torque settings: 21 - (Idle) impact speed: 0 - 8250 / 31500 min-¹ - Drilling capacity in masonry: 16 mm - Drilling capacity in steel: 13 mm - Drilling capacity in wood (auger drill): 50 mm - Drilling capacity in wood (Forstner bit): 76 mm - Drilling capacity with flat milling drills: 40 mm - Drilling capacity with hole saws:: 152 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Motor brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value), drilling in metal: 1.5 m/s² - Vibration values, impact drilling in concrete: 8.6 m/s² - Vibration uncertainty factor (K value), impact drilling in concrete: 1.5 m/s² - Sound power level (LWA): 95 dB(A) - Sound pressure level (LpA): 87 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 180 x 81 x 265 mm - Weight incl. battery: 2.3 - 2.7 kg - Product weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 492 cordless impact drill driver - 1x depth stop ( 122576-8 ) - 1x side handle with extension ( 122F12-0 ) - 1x Makita BL 1850 B 18 V 5.0 Ah rechargeable battery - 1x Makita DC 18 RC battery quick charger - 1x Makita MAKPAC system case - 1x universal insert Product Description: The Makita DHP 492 cordless impact drill driver is a powerful and compact machine for professional use. Equipped with 18 volts and a brushless motor, it impresses with its high efficiency and durability. The switchable impact mechanism enables flexible working depending on the application. With a maximum torque of 141 Nm - as well as 130 Nm for hard and 65 Nm for soft screwdriving - it offers sufficient power reserves for demanding tasks. The torque can be precisely adjusted in 21 stages plus a drilling stage. The features include a robust metal quick-action drill chuck, a side handle for better control and a bright double LED with pre-glow and afterglow function for optimum visibility even in dark working areas. The integrated deep discharge protection switches the tool off automatically when the battery is almost empty, while the electronic overload protection provides additional safety. An electronic brake ensures maximum efficiency and user protection. Thanks to the compact and lightweight design, fatigue-free working is supported even during long periods of use. Technical Data: - Manufacturer : Makita - Manufacturer designation : DHP 492 - Battery voltage: 18 V - Battery type: Li-ion - Idle speed: 0 - 550 / 2100 min-¹ - Torque hard/soft: 130 / 65 Nm - Locking torque: 141 Nm - Torque settings: 21 - (Idle) impact speed: 0 - 8250 / 31500 min-¹ - Drilling capacity in masonry: 16 mm - Drilling capacity in steel: 13 mm - Drilling capacity in wood (auger drill): 50 mm - Drilling capacity in wood (Forstner bit): 76 mm - Drilling capacity with flat milling drills: 40 mm - Drilling capacity with hole saws:: 152 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Motor brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value), drilling in metal: 1.5 m/s² - Vibration values, impact drilling in concrete: 8.6 m/s² - Vibration uncertainty factor (K value), impact drilling in concrete: 1.5 m/s² - Sound power level (LWA): 95 dB(A) - Sound pressure level (LpA): 87 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 180 x 81 x 265 mm - Weight incl. battery: 2.3 - 2.7 kg - Product weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 492 cordless impact drill - 1x depth stop ( 122576-8 ) - 1x side handle with extension ( 122F12-0 ) - 1x Makita BL 1830 B 18 V 3.0 Ah rechargeable battery - 1x Makita DC 18 RC battery fast charger Product Description: The Makita DHP 492 cordless impact drill driver is a powerful and compact machine for professional use. Equipped with 18 volts and a brushless motor, it impresses with its high efficiency and durability. The switchable impact mechanism enables flexible working depending on the application. With a maximum torque of 141 Nm - as well as 130 Nm for hard and 65 Nm for soft screwdriving - it offers sufficient power reserves for demanding tasks. The torque can be precisely adjusted in 21 stages plus a drilling stage. The features include a robust metal quick-action drill chuck, a side handle for better control and a bright double LED with pre-glow and afterglow function for optimum visibility even in dark working areas. The integrated deep discharge protection switches the tool off automatically when the battery is almost empty, while the electronic overload protection provides additional safety. An electronic brake ensures maximum efficiency and user protection. Thanks to the compact and lightweight design, fatigue-free working is supported even during long periods of use. Technical Data: - Manufacturer : Makita - Manufacturer designation : DHP 492 - Battery voltage: 18 V - Battery type: Li-ion - Idle speed: 0 - 550 / 2100 min-¹ - Torque hard/soft: 130 / 65 Nm - Locking torque: 141 Nm - Torque settings: 21 - (Idle) impact speed: 0 - 8250 / 31500 min-¹ - Drilling capacity in masonry: 16 mm - Drilling capacity in steel: 13 mm - Drilling capacity in wood (auger drill): 50 mm - Drilling capacity in wood (Forstner bit): 76 mm - Drilling capacity with flat milling drills: 40 mm - Drilling capacity with hole saws:: 152 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Motor brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value), drilling in metal: 1.5 m/s² - Vibration values, impact drilling in concrete: 8.6 m/s² - Vibration uncertainty factor (K value), impact drilling in concrete: 1.5 m/s² - Sound power level (LWA): 95 dB(A) - Sound pressure level (LpA): 87 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 180 x 81 x 265 mm - Weight incl. battery: 2.3 - 2.7 kg - Product weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 492 cordless impact drill - 1x depth stop ( 122576-8 ) - 1x side handle with extension ( 122F12-0 ) - 1x Makita BL 1840 B 18 V 4.0 Ah rechargeable battery - 1x Makita DC 18 RC battery quick charger Product Description: The Makita DHP 492 cordless impact drill driver is a powerful and compact machine for professional use. Equipped with 18 volts and a brushless motor, it impresses with its high efficiency and durability. The switchable impact mechanism enables flexible working depending on the application. With a maximum torque of 141 Nm - as well as 130 Nm for hard and 65 Nm for soft screwdriving - it offers sufficient power reserves for demanding tasks. The torque can be precisely adjusted in 21 stages plus a drilling stage. The features include a robust metal quick-action drill chuck, a side handle for better control and a bright double LED with pre-glow and afterglow function for optimum visibility even in dark working areas. The integrated deep discharge protection switches the tool off automatically when the battery is almost empty, while the electronic overload protection provides additional safety. An electronic brake ensures maximum efficiency and user protection. Thanks to the compact and lightweight design, fatigue-free working is supported even during long periods of use. Technical Data: - Manufacturer : Makita - Manufacturer designation : DHP 492 - Battery voltage: 18 V - Battery type: Li-ion - Idle speed: 0 - 550 / 2100 min-¹ - Torque hard/soft: 130 / 65 Nm - Locking torque: 141 Nm - Torque settings: 21 - (Idle) impact speed: 0 - 8250 / 31500 min-¹ - Drilling capacity in masonry: 16 mm - Drilling capacity in steel: 13 mm - Drilling capacity in wood (auger drill): 50 mm - Drilling capacity in wood (Forstner bit): 76 mm - Drilling capacity with flat milling drills: 40 mm - Drilling capacity with hole saws:: 152 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Motor brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value), drilling in metal: 1.5 m/s² - Vibration values, impact drilling in concrete: 8.6 m/s² - Vibration uncertainty factor (K value), impact drilling in concrete: 1.5 m/s² - Sound power level (LWA): 95 dB(A) - Sound pressure level (LpA): 87 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 180 x 81 x 265 mm - Weight incl. battery: 2.3 - 2.7 kg - Product weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 492 cordless impact drill - 1x depth stop ( 122576-8 ) - 1x side handle with extension ( 122F12-0 ) - 1x Makita BL 1860 B 18 V 6.0 Ah rechargeable battery - 1x Makita DC 18 RC battery fast charger Product Description: The Makita DHP 492 cordless impact drill driver is a powerful and compact machine for professional use. Equipped with 18 volts and a brushless motor, it impresses with its high efficiency and durability. The switchable impact mechanism enables flexible working depending on the application. With a maximum torque of 141 Nm - as well as 130 Nm for hard and 65 Nm for soft screwdriving - it offers sufficient power reserves for demanding tasks. The torque can be precisely adjusted in 21 stages plus a drilling stage. The features include a robust metal quick-action drill chuck, a side handle for better control and a bright double LED with pre-glow and afterglow function for optimum visibility even in dark working areas. The integrated deep discharge protection switches the tool off automatically when the battery is almost empty, while the electronic overload protection provides additional safety. An electronic brake ensures maximum efficiency and user protection. Thanks to the compact and lightweight design, fatigue-free working is supported even during long periods of use. Technical Data: - Manufacturer : Makita - Manufacturer designation : DHP 492 - Battery voltage: 18 V - Battery type: Li-ion - Idle speed: 0 - 550 / 2100 min-¹ - Torque hard/soft: 130 / 65 Nm - Locking torque: 141 Nm - Torque settings: 21 - (Idle) impact speed: 0 - 8250 / 31500 min-¹ - Drilling capacity in masonry: 16 mm - Drilling capacity in steel: 13 mm - Drilling capacity in wood (auger drill): 50 mm - Drilling capacity in wood (Forstner bit): 76 mm - Drilling capacity with flat milling drills: 40 mm - Drilling capacity with hole saws:: 152 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Motor brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value), drilling in metal: 1.5 m/s² - Vibration values, impact drilling in concrete: 8.6 m/s² - Vibration uncertainty factor (K value), impact drilling in concrete: 1.5 m/s² - Sound power level (LWA): 95 dB(A) - Sound pressure level (LpA): 87 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 180 x 81 x 265 mm - Weight incl. battery: 2.3 - 2.7 kg - Product weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 492 cordless impact drill - 1x depth stop ( 122576-8 ) - 1x side handle with extension ( 122F12-0 ) - 2x Makita BL 1840 B 18 V 4.0 Ah rechargeable battery - 1x Makita DC 18 RC battery quick charger Product Description: The Makita DHP 492 cordless impact drill driver is a powerful and compact machine for professional use. Equipped with 18 volts and a brushless motor, it impresses with its high efficiency and durability. The switchable impact mechanism enables flexible working depending on the application. With a maximum torque of 141 Nm - as well as 130 Nm for hard and 65 Nm for soft screwdriving - it offers sufficient power reserves for demanding tasks. The torque can be precisely adjusted in 21 stages plus a drilling stage. The features include a robust metal quick-action drill chuck, a side handle for better control and a bright double LED with pre-glow and afterglow function for optimum visibility even in dark working areas. The integrated deep discharge protection switches the tool off automatically when the battery is almost empty, while the electronic overload protection provides additional safety. An electronic brake ensures maximum efficiency and user protection. Thanks to the compact and lightweight design, fatigue-free working is supported even during long periods of use. Technical Data: - Manufacturer : Makita - Manufacturer designation : DHP 492 - Battery voltage: 18 V - Battery type: Li-ion - Idle speed: 0 - 550 / 2100 min-¹ - Torque hard/soft: 130 / 65 Nm - Locking torque: 141 Nm - Torque settings: 21 - (Idle) impact speed: 0 - 8250 / 31500 min-¹ - Drilling capacity in masonry: 16 mm - Drilling capacity in steel: 13 mm - Drilling capacity in wood (auger drill): 50 mm - Drilling capacity in wood (Forstner bit): 76 mm - Drilling capacity with flat milling drills: 40 mm - Drilling capacity with hole saws:: 152 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Motor brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value), drilling in metal: 1.5 m/s² - Vibration values, impact drilling in concrete: 8.6 m/s² - Vibration uncertainty factor (K value), impact drilling in concrete: 1.5 m/s² - Sound power level (LWA): 95 dB(A) - Sound pressure level (LpA): 87 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 180 x 81 x 265 mm - Weight incl. battery: 2.3 - 2.7 kg - Product weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 492 cordless impact drill driver - 1x depth stop ( 122576-8 ) - 1x side handle with extension ( 122F12-0 ) - 1x Makita BL 1850 B 18 V 5.0 Ah rechargeable battery - 1x Makita MAKPAC system case - 1x universal insert - without charger Product Description: The Makita DHP 492 cordless impact drill driver is a powerful and compact machine for professional use. Equipped with 18 volts and a brushless motor, it impresses with its high efficiency and durability. The switchable impact mechanism enables flexible working depending on the application. With a maximum torque of 141 Nm - as well as 130 Nm for hard and 65 Nm for soft screwdriving - it offers sufficient power reserves for demanding tasks. The torque can be precisely adjusted in 21 stages plus a drilling stage. The features include a robust metal quick-action drill chuck, a side handle for better control and a bright double LED with pre-glow and afterglow function for optimum visibility even in dark working areas. The integrated deep discharge protection switches the tool off automatically when the battery is almost empty, while the electronic overload protection provides additional safety. An electronic brake ensures maximum efficiency and user protection. Thanks to the compact and lightweight design, fatigue-free working is supported even during long periods of use. Technical Data: - Manufacturer : Makita - Manufacturer designation : DHP 492 - Battery voltage: 18 V - Battery type: Li-ion - Idle speed: 0 - 550 / 2100 min-¹ - Torque hard/soft: 130 / 65 Nm - Locking torque: 141 Nm - Torque settings: 21 - (Idle) impact speed: 0 - 8250 / 31500 min-¹ - Drilling capacity in masonry: 16 mm - Drilling capacity in steel: 13 mm - Drilling capacity in wood (auger drill): 50 mm - Drilling capacity in wood (Forstner bit): 76 mm - Drilling capacity with flat milling drills: 40 mm - Drilling capacity with hole saws:: 152 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Motor brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value), drilling in metal: 1.5 m/s² - Vibration values, impact drilling in concrete: 8.6 m/s² - Vibration uncertainty factor (K value), impact drilling in concrete: 1.5 m/s² - Sound power level (LWA): 95 dB(A) - Sound pressure level (LpA): 87 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 180 x 81 x 265 mm - Weight incl. battery: 2.3 - 2.7 kg - Product weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 492 cordless impact drill driver - 1x depth stop ( 122576-8 ) - 1x side handle with extension ( 122F12-0 ) - 1x Makita BL 1860 B 18 V 6.0 Ah rechargeable battery - 1x Makita MAKPAC system case - 1x universal insert - without charger Product Description: The Makita DHP 492 cordless impact drill driver is a powerful and compact machine for professional use. Equipped with 18 volts and a brushless motor, it impresses with its high efficiency and durability. The switchable impact mechanism enables flexible working depending on the application. With a maximum torque of 141 Nm - as well as 130 Nm for hard and 65 Nm for soft screwdriving - it offers sufficient power reserves for demanding tasks. The torque can be precisely adjusted in 21 stages plus a drilling stage. The features include a robust metal quick-action drill chuck, a side handle for better control and a bright double LED with pre-glow and afterglow function for optimum visibility even in dark working areas. The integrated deep discharge protection switches the tool off automatically when the battery is almost empty, while the electronic overload protection provides additional safety. An electronic brake ensures maximum efficiency and user protection. Thanks to the compact and lightweight design, fatigue-free working is supported even during long periods of use. Technical Data: - Manufacturer : Makita - Manufacturer designation : DHP 492 - Battery voltage: 18 V - Battery type: Li-ion - Idle speed: 0 - 550 / 2100 min-¹ - Torque hard/soft: 130 / 65 Nm - Locking torque: 141 Nm - Torque settings: 21 - (Idle) impact speed: 0 - 8250 / 31500 min-¹ - Drilling capacity in masonry: 16 mm - Drilling capacity in steel: 13 mm - Drilling capacity in wood (auger drill): 50 mm - Drilling capacity in wood (Forstner bit): 76 mm - Drilling capacity with flat milling drills: 40 mm - Drilling capacity with hole saws:: 152 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Motor brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value), drilling in metal: 1.5 m/s² - Vibration values, impact drilling in concrete: 8.6 m/s² - Vibration uncertainty factor (K value), impact drilling in concrete: 1.5 m/s² - Sound power level (LWA): 95 dB(A) - Sound pressure level (LpA): 87 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 180 x 81 x 265 mm - Weight incl. battery: 2.3 - 2.7 kg - Product weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 492 cordless impact drill - 1x depth stop ( 122576-8 ) - 1x side handle with extension ( 122F12-0 ) - 2x Makita BL 1840 B 18 V 4.0 Ah rechargeable battery - 1x Makita DC 18 RC battery quick charger - 1x Makita MAKPAC system case - 1x universal insert Product Description: The Makita DHP 492 cordless impact drill driver is a powerful and compact machine for professional use. Equipped with 18 volts and a brushless motor, it impresses with its high efficiency and durability. The switchable impact mechanism enables flexible working depending on the application. With a maximum torque of 141 Nm - as well as 130 Nm for hard and 65 Nm for soft screwdriving - it offers sufficient power reserves for demanding tasks. The torque can be precisely adjusted in 21 stages plus a drilling stage. The features include a robust metal quick-action drill chuck, a side handle for better control and a bright double LED with pre-glow and afterglow function for optimum visibility even in dark working areas. The integrated deep discharge protection switches the tool off automatically when the battery is almost empty, while the electronic overload protection provides additional safety. An electronic brake ensures maximum efficiency and user protection. Thanks to the compact and lightweight design, fatigue-free working is supported even during long periods of use. Technical Data: - Manufacturer : Makita - Manufacturer designation : DHP 492 - Battery voltage: 18 V - Battery type: Li-ion - Idle speed: 0 - 550 / 2100 min-¹ - Torque hard/soft: 130 / 65 Nm - Locking torque: 141 Nm - Torque settings: 21 - (Idle) impact speed: 0 - 8250 / 31500 min-¹ - Drilling capacity in masonry: 16 mm - Drilling capacity in steel: 13 mm - Drilling capacity in wood (auger drill): 50 mm - Drilling capacity in wood (Forstner bit): 76 mm - Drilling capacity with flat milling drills: 40 mm - Drilling capacity with hole saws:: 152 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Motor brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value), drilling in metal: 1.5 m/s² - Vibration values, impact drilling in concrete: 8.6 m/s² - Vibration uncertainty factor (K value), impact drilling in concrete: 1.5 m/s² - Sound power level (LWA): 95 dB(A) - Sound pressure level (LpA): 87 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 180 x 81 x 265 mm - Weight incl. battery: 2.3 - 2.7 kg - Product weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 492 cordless impact drill - 1x depth stop ( 122576-8 ) - 1x side handle with extension ( 122F12-0 ) - 1x Makita BL 1830 B 18 V 3.0 Ah rechargeable battery - without charger Product Description: The Makita DHP 492 cordless impact drill driver is a powerful and compact machine for professional use. Equipped with 18 volts and a brushless motor, it impresses with its high efficiency and durability. The switchable impact mechanism enables flexible working depending on the application. With a maximum torque of 141 Nm - as well as 130 Nm for hard and 65 Nm for soft screwdriving - it offers sufficient power reserves for demanding tasks. The torque can be precisely adjusted in 21 stages plus a drilling stage. The features include a robust metal quick-action drill chuck, a side handle for better control and a bright double LED with pre-glow and afterglow function for optimum visibility even in dark working areas. The integrated deep discharge protection switches the tool off automatically when the battery is almost empty, while the electronic overload protection provides additional safety. An electronic brake ensures maximum efficiency and user protection. Thanks to the compact and lightweight design, fatigue-free working is supported even during long periods of use. Technical Data: - Manufacturer : Makita - Manufacturer designation : DHP 492 - Battery voltage: 18 V - Battery type: Li-ion - Idle speed: 0 - 550 / 2100 min-¹ - Torque hard/soft: 130 / 65 Nm - Locking torque: 141 Nm - Torque settings: 21 - (Idle) impact speed: 0 - 8250 / 31500 min-¹ - Drilling capacity in masonry: 16 mm - Drilling capacity in steel: 13 mm - Drilling capacity in wood (auger drill): 50 mm - Drilling capacity in wood (Forstner bit): 76 mm - Drilling capacity with flat milling drills: 40 mm - Drilling capacity with hole saws:: 152 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Motor brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value), drilling in metal: 1.5 m/s² - Vibration values, impact drilling in concrete: 8.6 m/s² - Vibration uncertainty factor (K value), impact drilling in concrete: 1.5 m/s² - Sound power level (LWA): 95 dB(A) - Sound pressure level (LpA): 87 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 180 x 81 x 265 mm - Weight incl. battery: 2.3 - 2.7 kg - Product weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 492 cordless impact drill - 1x depth stop ( 122576-8 ) - 1x side handle with extension ( 122F12-0 ) - 1x Makita BL 1830 B 18 V 3.0 Ah rechargeable battery - 1x Makita MAKPAC system case - 1x universal insert - without charger Product Description: The Makita DHP 492 cordless impact drill driver is a powerful and compact machine for professional use. Equipped with 18 volts and a brushless motor, it impresses with its high efficiency and durability. The switchable impact mechanism enables flexible working depending on the application. With a maximum torque of 141 Nm - as well as 130 Nm for hard and 65 Nm for soft screwdriving - it offers sufficient power reserves for demanding tasks. The torque can be precisely adjusted in 21 stages plus a drilling stage. The features include a robust metal quick-action drill chuck, a side handle for better control and a bright double LED with pre-glow and afterglow function for optimum visibility even in dark working areas. The integrated deep discharge protection switches the tool off automatically when the battery is almost empty, while the electronic overload protection provides additional safety. An electronic brake ensures maximum efficiency and user protection. Thanks to the compact and lightweight design, fatigue-free working is supported even during long periods of use. Technical Data: - Manufacturer : Makita - Manufacturer designation : DHP 492 - Battery voltage: 18 V - Battery type: Li-ion - Idle speed: 0 - 550 / 2100 min-¹ - Torque hard/soft: 130 / 65 Nm - Locking torque: 141 Nm - Torque settings: 21 - (Idle) impact speed: 0 - 8250 / 31500 min-¹ - Drilling capacity in masonry: 16 mm - Drilling capacity in steel: 13 mm - Drilling capacity in wood (auger drill): 50 mm - Drilling capacity in wood (Forstner bit): 76 mm - Drilling capacity with flat milling drills: 40 mm - Drilling capacity with hole saws:: 152 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Motor brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value), drilling in metal: 1.5 m/s² - Vibration values, impact drilling in concrete: 8.6 m/s² - Vibration uncertainty factor (K value), impact drilling in concrete: 1.5 m/s² - Sound power level (LWA): 95 dB(A) - Sound pressure level (LpA): 87 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 180 x 81 x 265 mm - Weight incl. battery: 2.3 - 2.7 kg - Product weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 492 cordless impact drill - 1x depth stop ( 122576-8 ) - 1x side handle with extension ( 122F12-0 ) - 2x Makita BL 1830 B 18 V 3.0 Ah rechargeable battery - 1x Makita DC 18 RC battery quick charger Product Description: The Makita DHP 492 cordless impact drill driver is a powerful and compact machine for professional use. Equipped with 18 volts and a brushless motor, it impresses with its high efficiency and durability. The switchable impact mechanism enables flexible working depending on the application. With a maximum torque of 141 Nm - as well as 130 Nm for hard and 65 Nm for soft screwdriving - it offers sufficient power reserves for demanding tasks. The torque can be precisely adjusted in 21 stages plus a drilling stage. The features include a robust metal quick-action drill chuck, a side handle for better control and a bright double LED with pre-glow and afterglow function for optimum visibility even in dark working areas. The integrated deep discharge protection switches the tool off automatically when the battery is almost empty, while the electronic overload protection provides additional safety. An electronic brake ensures maximum efficiency and user protection. Thanks to the compact and lightweight design, fatigue-free working is supported even during long periods of use. Technical Data: - Manufacturer : Makita - Manufacturer designation : DHP 492 - Battery voltage: 18 V - Battery type: Li-ion - Idle speed: 0 - 550 / 2100 min-¹ - Torque hard/soft: 130 / 65 Nm - Locking torque: 141 Nm - Torque settings: 21 - (Idle) impact speed: 0 - 8250 / 31500 min-¹ - Drilling capacity in masonry: 16 mm - Drilling capacity in steel: 13 mm - Drilling capacity in wood (auger drill): 50 mm - Drilling capacity in wood (Forstner bit): 76 mm - Drilling capacity with flat milling drills: 40 mm - Drilling capacity with hole saws:: 152 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Motor brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value), drilling in metal: 1.5 m/s² - Vibration values, impact drilling in concrete: 8.6 m/s² - Vibration uncertainty factor (K value), impact drilling in concrete: 1.5 m/s² - Sound power level (LWA): 95 dB(A) - Sound pressure level (LpA): 87 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 180 x 81 x 265 mm - Weight incl. battery: 2.3 - 2.7 kg - Product weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 492 cordless impact drill - 1x depth stop ( 122576-8 ) - 1x side handle with extension ( 122F12-0 ) - 1x Makita BL 1850 B 18 V 5.0 Ah rechargeable battery - 1x Makita DC 18 RC battery quick charger Product Description: The Makita DHP 492 cordless impact drill driver is a powerful and compact machine for professional use. Equipped with 18 volts and a brushless motor, it impresses with its high efficiency and durability. The switchable impact mechanism enables flexible working depending on the application. With a maximum torque of 141 Nm - as well as 130 Nm for hard and 65 Nm for soft screwdriving - it offers sufficient power reserves for demanding tasks. The torque can be precisely adjusted in 21 stages plus a drilling stage. The features include a robust metal quick-action drill chuck, a side handle for better control and a bright double LED with pre-glow and afterglow function for optimum visibility even in dark working areas. The integrated deep discharge protection switches the tool off automatically when the battery is almost empty, while the electronic overload protection provides additional safety. An electronic brake ensures maximum efficiency and user protection. Thanks to the compact and lightweight design, fatigue-free working is supported even during long periods of use. Technical Data: - Manufacturer : Makita - Manufacturer designation : DHP 492 - Battery voltage: 18 V - Battery type: Li-ion - Idle speed: 0 - 550 / 2100 min-¹ - Torque hard/soft: 130 / 65 Nm - Locking torque: 141 Nm - Torque settings: 21 - (Idle) impact speed: 0 - 8250 / 31500 min-¹ - Drilling capacity in masonry: 16 mm - Drilling capacity in steel: 13 mm - Drilling capacity in wood (auger drill): 50 mm - Drilling capacity in wood (Forstner bit): 76 mm - Drilling capacity with flat milling drills: 40 mm - Drilling capacity with hole saws:: 152 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Motor brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value), drilling in metal: 1.5 m/s² - Vibration values, impact drilling in concrete: 8.6 m/s² - Vibration uncertainty factor (K value), impact drilling in concrete: 1.5 m/s² - Sound power level (LWA): 95 dB(A) - Sound pressure level (LpA): 87 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 180 x 81 x 265 mm - Weight incl. battery: 2.3 - 2.7 kg - Product weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 492 cordless impact drill driver - 1x depth stop ( 122576-8 ) - 1x side handle with extension ( 122F12-0 ) - 1x Makita BL 1840 B 18 V 4.0 Ah rechargeable battery - 1x Makita DC 18 RC battery quick charger - 1x Makita MAKPAC system case - 1x universal insert Product Description: The Makita DHP 492 cordless impact drill driver is a powerful and compact machine for professional use. Equipped with 18 volts and a brushless motor, it impresses with its high efficiency and durability. The switchable impact mechanism enables flexible working depending on the application. With a maximum torque of 141 Nm - as well as 130 Nm for hard and 65 Nm for soft screwdriving - it offers sufficient power reserves for demanding tasks. The torque can be precisely adjusted in 21 stages plus a drilling stage. The features include a robust metal quick-action drill chuck, a side handle for better control and a bright double LED with pre-glow and afterglow function for optimum visibility even in dark working areas. The integrated deep discharge protection switches the tool off automatically when the battery is almost empty, while the electronic overload protection provides additional safety. An electronic brake ensures maximum efficiency and user protection. Thanks to the compact and lightweight design, fatigue-free working is supported even during long periods of use. Technical Data: - Manufacturer : Makita - Manufacturer designation : DHP 492 - Battery voltage: 18 V - Battery type: Li-ion - Idle speed: 0 - 550 / 2100 min-¹ - Torque hard/soft: 130 / 65 Nm - Locking torque: 141 Nm - Torque settings: 21 - (Idle) impact speed: 0 - 8250 / 31500 min-¹ - Drilling capacity in masonry: 16 mm - Drilling capacity in steel: 13 mm - Drilling capacity in wood (auger drill): 50 mm - Drilling capacity in wood (Forstner bit): 76 mm - Drilling capacity with flat milling drills: 40 mm - Drilling capacity with hole saws:: 152 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Motor brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value), drilling in metal: 1.5 m/s² - Vibration values, impact drilling in concrete: 8.6 m/s² - Vibration uncertainty factor (K value), impact drilling in concrete: 1.5 m/s² - Sound power level (LWA): 95 dB(A) - Sound pressure level (LpA): 87 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 180 x 81 x 265 mm - Weight incl. battery: 2.3 - 2.7 kg - Product weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 492 cordless impact drill - 1x depth stop ( 122576-8 ) - 1x side handle with extension ( 122F12-0 ) - 2x Makita BL 1850 B 18 V 5.0 Ah rechargeable battery - 1x Makita DC 18 RC battery quick charger Product Description: The Makita DHP 492 cordless impact drill driver is a powerful and compact machine for professional use. Equipped with 18 volts and a brushless motor, it impresses with its high efficiency and durability. The switchable impact mechanism enables flexible working depending on the application. With a maximum torque of 141 Nm - as well as 130 Nm for hard and 65 Nm for soft screwdriving - it offers sufficient power reserves for demanding tasks. The torque can be precisely adjusted in 21 stages plus a drilling stage. The features include a robust metal quick-action drill chuck, a side handle for better control and a bright double LED with pre-glow and afterglow function for optimum visibility even in dark working areas. The integrated deep discharge protection switches the tool off automatically when the battery is almost empty, while the electronic overload protection provides additional safety. An electronic brake ensures maximum efficiency and user protection. Thanks to the compact and lightweight design, fatigue-free working is supported even during long periods of use. Technical Data: - Manufacturer : Makita - Manufacturer designation : DHP 492 - Battery voltage: 18 V - Battery type: Li-ion - Idle speed: 0 - 550 / 2100 min-¹ - Torque hard/soft: 130 / 65 Nm - Locking torque: 141 Nm - Torque settings: 21 - (Idle) impact speed: 0 - 8250 / 31500 min-¹ - Drilling capacity in masonry: 16 mm - Drilling capacity in steel: 13 mm - Drilling capacity in wood (auger drill): 50 mm - Drilling capacity in wood (Forstner bit): 76 mm - Drilling capacity with flat milling drills: 40 mm - Drilling capacity with hole saws:: 152 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Motor brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value), drilling in metal: 1.5 m/s² - Vibration values, impact drilling in concrete: 8.6 m/s² - Vibration uncertainty factor (K value), impact drilling in concrete: 1.5 m/s² - Sound power level (LWA): 95 dB(A) - Sound pressure level (LpA): 87 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 180 x 81 x 265 mm - Weight incl. battery: 2.3 - 2.7 kg - Product weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 492 cordless impact drill - 1x depth stop ( 122576-8 ) - 1x side handle with extension ( 122F12-0 ) - 1x Makita BL 1860 B 18 V 6.0 Ah rechargeable battery - 1x Makita DC 18 RC battery quick charger - 1x Makita MAKPAC system case - 1x universal insert Product Description: The Makita DHP 492 cordless impact drill driver is a powerful and compact machine for professional use. Equipped with 18 volts and a brushless motor, it impresses with its high efficiency and durability. The switchable impact mechanism enables flexible working depending on the application. With a maximum torque of 141 Nm - as well as 130 Nm for hard and 65 Nm for soft screwdriving - it offers sufficient power reserves for demanding tasks. The torque can be precisely adjusted in 21 stages plus a drilling stage. The features include a robust metal quick-action drill chuck, a side handle for better control and a bright double LED with pre-glow and afterglow function for optimum visibility even in dark working areas. The integrated deep discharge protection switches the tool off automatically when the battery is almost empty, while the electronic overload protection provides additional safety. An electronic brake ensures maximum efficiency and user protection. Thanks to the compact and lightweight design, fatigue-free working is supported even during long periods of use. Technical Data: - Manufacturer : Makita - Manufacturer designation : DHP 492 - Battery voltage: 18 V - Battery type: Li-ion - Idle speed: 0 - 550 / 2100 min-¹ - Torque hard/soft: 130 / 65 Nm - Locking torque: 141 Nm - Torque settings: 21 - (Idle) impact speed: 0 - 8250 / 31500 min-¹ - Drilling capacity in masonry: 16 mm - Drilling capacity in steel: 13 mm - Drilling capacity in wood (auger drill): 50 mm - Drilling capacity in wood (Forstner bit): 76 mm - Drilling capacity with flat milling drills: 40 mm - Drilling capacity with hole saws:: 152 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Motor brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value), drilling in metal: 1.5 m/s² - Vibration values, impact drilling in concrete: 8.6 m/s² - Vibration uncertainty factor (K value), impact drilling in concrete: 1.5 m/s² - Sound power level (LWA): 95 dB(A) - Sound pressure level (LpA): 87 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 180 x 81 x 265 mm - Weight incl. battery: 2.3 - 2.7 kg - Product weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 492 cordless impact drill - 1x depth stop ( 122576-8 ) - 1x side handle with extension ( 122F12-0 ) - 1x Makita BL 1860 B 18 V 6.0 Ah rechargeable battery - without charger Product Description: The Makita DHP 492 cordless impact drill driver is a powerful and compact machine for professional use. Equipped with 18 volts and a brushless motor, it impresses with its high efficiency and durability. The switchable impact mechanism enables flexible working depending on the application. With a maximum torque of 141 Nm - as well as 130 Nm for hard and 65 Nm for soft screwdriving - it offers sufficient power reserves for demanding tasks. The torque can be precisely adjusted in 21 stages plus a drilling stage. The features include a robust metal quick-action drill chuck, a side handle for better control and a bright double LED with pre-glow and afterglow function for optimum visibility even in dark working areas. The integrated deep discharge protection switches the tool off automatically when the battery is almost empty, while the electronic overload protection provides additional safety. An electronic brake ensures maximum efficiency and user protection. Thanks to the compact and lightweight design, fatigue-free working is supported even during long periods of use. Technical Data: - Manufacturer : Makita - Manufacturer designation : DHP 492 - Battery voltage: 18 V - Battery type: Li-ion - Idle speed: 0 - 550 / 2100 min-¹ - Torque hard/soft: 130 / 65 Nm - Locking torque: 141 Nm - Torque settings: 21 - (Idle) impact speed: 0 - 8250 / 31500 min-¹ - Drilling capacity in masonry: 16 mm - Drilling capacity in steel: 13 mm - Drilling capacity in wood (auger drill): 50 mm - Drilling capacity in wood (Forstner bit): 76 mm - Drilling capacity with flat milling drills: 40 mm - Drilling capacity with hole saws:: 152 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Motor brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value), drilling in metal: 1.5 m/s² - Vibration values, impact drilling in concrete: 8.6 m/s² - Vibration uncertainty factor (K value), impact drilling in concrete: 1.5 m/s² - Sound power level (LWA): 95 dB(A) - Sound pressure level (LpA): 87 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 180 x 81 x 265 mm - Weight incl. battery: 2.3 - 2.7 kg - Product weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less