Makita

Scope of Delivery: - 2 x BL 1850 B rechargeable battery 5 Ah - 18 V Product Description: The Makita BL 1850 B battery with 5 Ah impresses with maximised endurance at the same weight (compared to 3 Ah batteries). An additional advantage is the short charging time of just 45 minutes in the Makita charger. Thanks to low self-discharge and short-circuit, overvoltage and overheating protection, the battery has a maximum service life. Technical Data: - Battery capacity: 5 Ah - Battery voltage: 18 V - Charging time: approx. 45 minutes - Weight per battery: 625 g - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita BL 1021 B rechargeable battery 12 V 2.0 Ah Li-Ion ( 197396-9 ) Product Description: The Makita BL 1021 B 12-volt Li-ion battery with 2 Ah impresses with maximised endurance with the same size (compared to BL 1020 B). Thanks to low self-discharge and short-circuit, overvoltage and overheating protection, the battery has a maximum service life. Technical Data: - Item number: 197396-9 - Voltage: 12V - Power: 2.0Ah - Type: Li-Ion - Weight: 220g - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita BL 4040 battery 40 V max. 4.0 Ah XGT Li-Ion battery ( 191B26-6 ) Product Description: With the 40 volt battery from Makita, the history of the next battery generation is being written. The flagship of the XGT battery series is, on the one hand, the increased performance and, on the other, the even more robust design of the batteries. Makita now offers the battery power needed to replace mains-powered tools. Thanks to the special design of the rechargeable batteries, higher discharge currents are possible, so that maximum power output can be achieved continuously. Digital communication between the battery, the machine and the charger optimises the performance of the individual components. Noticeably longer running times are possible with one battery charge. Tough operating conditions are no problem for the XGT batteries. Thanks to the ingenious design and internal safety features, a long service life and maximum performance are achieved: the cavity to cushion against falls, a dust-insulating layer, a water protection layer and a reinforced insertion rail are just a few examples. The Makita 40 volt battery segment creates a new battery ecosystem designed for maximum applications. Thanks to the four green LED lights on the front of the batteries, the battery capacity can be read quickly. Makita is a leading manufacturer of electrical appliances, characterised by high quality workmanship and a long tradition. Technical Data: - Manufacturer: Makita - Manufacturer number: 191B26-6 - Manufacturer's designation: BL 4040 - Battery voltage: 40 V - Battery system: XGT - Battery capacity: 4.0 Ah - Capacity: 144 Wh - Battery type: Li-ion - Charging time: 45 min - Weight: 1.0 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHR 241 cordless hammer drill - 1x side handle - 1x depth stop - without battery, without charger Product Description: The tool is designed for impact drilling and drilling in brick, concrete and stone as well as for chiselling work. It is also suitable for normal drilling in wood, metal, ceramic and plastic. The powerful rotary hammer is suitable for drilling, hammer drilling and chiselling. The combi hammer also impresses with its slip clutch, motor brake and 40-position chisel adjustment for safe and optimal work in any situation. The tool has externally replaceable carbon brushes and thanks to a new rubber damping design, less vibration is generated. With the SDS-Plus holder, the DHR 241 attachments can be picked up quickly, without tools and protected from dust. Technical Data: - Battery voltage: 18 V - Impact force: 2.0 joules - Tool holder: SDS-Plus - Max. Idle speed: 0-1100 rpm - Max. No-load impact rate: 0-4000 blows/min - Max. Drill diameter (steel): 13 mm - Max. Drill diameter (concrete): 20 mm - Max. Drill diameter (wood): 26 mm - Sound power level (dB): 97 dB(A) - Sound pressure level (dB): 86 dB(A) - K-value noise: 3 dB(A) - Vibration drilling: 2.5 m/s² - Vibration hammer drilling in concrete: 12.5 m/s² - Vibration chiselling with side handle: 9.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DTM 52 cordless multi-function tool - 1x TMA045 segment saw blade 85 mm Starlock for wood and steel ( B-64799 ) - 1x TMA047 Plunge-cut saw blade 32 x 50 mm wood & steel Starlock (B-64814) - 1x TMA049 segment saw blade 85 mm wood Starlock (B-64836) - 1x TMA057 Plunge-cut saw blade 10 x 30 mm steel Starlock (B-64917) - 1x TMA058 Plunge-cut saw blade 20 x 30 mm steel Starlock (B-64923) - 1x TMA059 Plunge-cut saw blade 32 x 50 mm steel Starlock (B-64939) - 1x TMA066 Scraper flexible 52 x 40 mm Starlock (B-64995) - 1x TMA069 Segment milling cutter carbide 85 mm K30 Starlock (B-65028) - 1x TMA071 Segment milling cutter HM 70 mm K50 Starlock (B-65040) - 1x TMA078 Delta sanding disc with Velcro fastener Starlock (B-65115) - 1x MAM001 Plunge-cut saw blade 32 x 80 mm wood&steel Starlock Max ( B-66400 ) - 1x MAM002 Plunge-cut saw blade 52 x 70 mm wood&steel Starlock Max (B-66416) - 1x MAM008 Universal joint cutter 32 x 60 mm Starlock Max (B-66472) - 10x K60 Delta sanding sheet Velcro 3-K 94 mm (P-33261) - 10x K100 Delta sanding sheet Velcro 3-K 94 mm ( P-33283 ) - 10x K150 Delta sanding sheet Velcro 3-K 94 mm ( P-33308 ) - 1x Makita Makpac case - 1x matching insert - without battery, without charger Product Description: With the DTM 52, Makita offers a versatile and powerful cordless multi-function tool for a wide range of applications. The DTM 52 has a Starlock Max holder and can therefore be used with a variety of different attachments. The tool can be attached in 12 different positions to enable you to work in hard-to-reach places. The built-in LED work light also illuminates darker places and thus enables optimum working. Thanks to the anti-vibration technology (AVT), fewer vibrations are transmitted to the handle, making it possible to work with less fatigue. Makita is a leading manufacturer of power tools, which is characterised above all by its high quality of workmanship and its huge 18 V ecosystem. Technical Data: - Manufacturer: Makita - Manufacturer designation: DTM 52 - Battery voltage: 18V - Battery series: LXT - Idle oscillation: 10000 - 20000 min-¹ - Oscillation angle: 2 x 1.8 º - Sanding surface (triangle): 93 x 93 x 93 mm - Machine weight incl. battery (EPTA): 1.7 - 2.0 kg - Product dimensions (L x W x H): 332 x 95 x 125 mm - Battery type (Ni-MH/Li-ion: LI-ion) - Sound pressure level (dB): 69 - 76 dB(A) - K-value noise: 3 dB(A) - Vibration sawing wood: ≤ 2.5 m/s² - Vibration sanding: ≤ 2.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DUC 353 cordless chainsaw - 1x saw bar 35 cm 1.1mm 3/8" - 1x saw chain 35 cm 1.1mm 3/8" K18 - without battery, without charger Product Description: The DUC 353 chainsaw impresses with its powerful 36-volt drive and extremely compact design. The universally applicable saw is very environmentally friendly thanks to its battery operation and the very fast chain speed guarantees fast and clean work progress. The brushless motor is virtually maintenance-free and the compact, robust, dirt and splash-proof housing ensures a long service life. The optimised weight distribution, automatic chain lubrication and automatic battery indicator ensure a high level of comfort, while the electric motor brake and kickback protection make working with the DUC 353 chainsaw extremely safe. Important: "Top-handle" chainsaws are only to be used by qualified specialists and only for work that is not carried out on the ground and are not intended for use by unqualified end users. According to EN ISO 11681-2 (2012), 5.1.3 Technical Data: - Chain speed: 0 - 20 m/s - Cutting length: 35 cm - Chain pitch 3/8" - Drive link thickness: 1.1 mm - Oil tank: 200 ml - Battery voltage: 2x 18 V - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DJV 185 Z cordless pendulum action jigsaw - 1x suction nozzle ( 413F05-1 ) - 1x plastic glide shoe ( 457867-1 ) - 1x protective cover ( 458191-5 ) - 1x hexagon spanner 3 mm ( 783201-2 ) - 2x jigsaw blade B-10 ( A-85628 ) - 2x jigsaw blade B-22 ( A-85737 ) - 2x jigsaw blade BR-13 ( A-85793 ) - 1x Makita MAKPAC plastic case - 1x universal insert - without battery, without charger Product Description: The Makita DJV 185 Z cordless pendulum action jigsaw is a powerful saw with three-stage pendulum action adjustment plus neutral position and tool-free saw blade change. The stroke speed can be set between 800 and 3,000 rpm depending on the material and the stroke height is 23 mm. The dimmable LED lighting allows the user to adjust the brightness while working. The XPT Extreme Protection Technology also ensures optimum protection against dust and splash water. The lockable switch enables continuous operation and the tool-free locking of the saw blade makes changing quick and easy. The powerful and maintenance-free brushless motor ensures energy-saving operation and the deep discharge protection protects against an empty battery. With the Makita DJV 185 Z cordless pendulum action jigsaw you get a powerful and reliable tool with which you can complete any project reliably and safely. Technical Data: - Manufacturer: Makita - Manufacturer designation: DJV 185 Z - LXT battery system: Yes - Battery voltage: 18 V - Battery protection system: Yes - Idle stroke rate: 800 - 3000 min-¹ - Lifting height: 23 mm - Max. Cutting capacity wood 90°: 135 mm - Cutting capacity steel: 10 mm - Max. Cutting capacity aluminium: 20 mm - Pendulum stroke: Yes - Product weight: 2.3 kg - Weight incl. battery (EPTA): 2.0 - 2.3 kg - Product dimensions (L x W x H): 259 x 77 x 183 mm - Drive type: Battery - Battery systems: LXT 18V/36V - Power consumption: 400 W - Sound power level (LWA): 95 dB(A) - Sound pressure level (LpA): 84 dB(A) - K-value noise: 3 dB(A) - K-value vibration: 1.7 m/s² - Vibration: 10.3 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1 x Makita DGA 504 Z cordless angle grinder solo - 1 x Makita MakPac incl. matching insert - 1 x Makita 125mm grinding disc A-80656 - 1 x assembly tool - 1 x additional handle - without battery, without charger Product Description: The power tool is designed for grinding, sanding and cutting metal and stone without the use of water. The very handy cordless angle grinder is suitable for cutting discs with a diameter of up to 125 mm. The AutomaticSpeedControl automatically regulates high speeds for cutting work or high torque for grinding work, depending on requirements. The brushless motor from Makita ensures greater endurance, a longer service life and a more compact housing. The motor is also protected by overload protection. The machine also has a juice start. A restart lock prevents unintentional starts after replacing the battery, and an integrated LED warns of decreasing battery voltage and overload. Technical Data: - Battery voltage: 18 V - Motor product type: brushless - Grinding disc diameter: 125 mm - Bore: 22.23 mm - Max. Disc thickness: 6 mm (1/4") - Idle speed: 8500 min-1 - Spindle thread: M14 - Dimensions (LxWxH): 350x141x130 mm - Weight: 2.3 kg - Sound pressure level: 79 dB(A) - Uncertainty (K): 3 dB(A) - Vibration emission (surface grinding with normal side grip): 6.5 m/s2 - Vibration emission (surface grinding with anti-vibration side grip): 6.0 m/s2 - Vibration emission (blade grinding): 2.5 m/s2 or less - Uncertainty (K): 1.5 m/s2 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DJV 180 cordless jigsaw 18V - 2x Makita BR-13 Jigsaw blade for wood and plastic, 105mm total length / 70mm working length, HCS ( A-85793 ) - 2x Makita B-22 jigsaw blade for aluminium / brass, plastic and mild steel, 76mm total length / 52mm working length, HSS ( A-85737 ) - 2x Makita B-10 jigsaw blade for wood and plastic, 100mm total length / 75mm working length, HCS (A-85628) - without battery, without charger Product Description: The robust Makita DJV 180 jigsaw impresses with its low noise level and infinitely variable stroke rate. The device has an integrated bright LED lamp and excellent vibration damping. The device also has an aluminium base plate that can be tilted up to 45° and the saw blades can be changed quickly, easily and without tools. Technical Data: - Idle stroke rate: 0 - 2,600 min-1 - Stroke height: 26 mm - Cutting capacity in wood: 135 mm - Cutting capacity in steel: 10 mm - Battery voltage: 18 V - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DC 10 SB quick charger for 10.8 - 12V Li-Ion batteries ( 197363-4 ) Product Description: The Makita DC 10 SB is a quick charger for 10.8 to 12 volt Li-Ion batteries from Makita. The charger always provides information about the charge status of the batteries and the integrated cooling system ensures that the batteries are always kept at the optimum temperature. The quick charger charges the Makita battery generation extremely quickly, resulting in very short charging pauses or a smooth work process as soon as two batteries are available, for example. Technical Data: - Input: 220V - 240V, 80W, 50-60Hz - Output/charging current: 10.8V - 12V (max.) 5A - Dimensions: 160 x 120 x 75 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DBO 380 orbital sander - 1x dust box cpl. ( 135327-0 ) - 1x battery protection cover ( 422807-8 ) - 1x perforated plate ( 451271-6 ) - 1x P120 sandpaper - without battery, without charger Product Description: The DBO 380 from Makita is a powerful cordless orbital sander for a wide range of applications. The 93 x 185 mm base plate makes it perfect for sanding large surfaces. Thanks to the three adjustable speed settings, even surface finishes on wood, metal or plastic are possible. The rubberised handle ensures a secure grip. The special arrangement of the battery ensures that the machine is perfectly balanced. The sanding dust can be collected with the dust collection box supplied or with an external dust extractor. Thanks to the perforated base plate, very effective dust extraction is possible. Makita is a leading manufacturer of power tools, characterised above all by its long tradition and high quality workmanship. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DBO 380 - Battery voltage: 18 V - Battery system: LXT - Battery protection system: Yes - Idle oscillation: 0 - 12000 min-¹ - Dust bag: Yes - Weight incl. battery (EPTA): 1.9 - 2.2 kg - Product dimensions (L x W x H): 336 x 92 x 158 - 169 mm - Sanding plate size: 92 x 185 mm - Paper size: 93 x 228 mm - Product weight: 2.2 kg - Sound pressure level (LpA): 72 dB(A) - K-value noise: 3 dB(A) - Vibration: 3.6 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DDF 482 cordless drill driver - without battery, without charger Product Description: The Makita DDF 482 is a powerful Li-ion cordless drill driver with a 2-speed full metal planetary gearbox. The torque can be set perfectly for every application in 21 stages and a bright LED with afterglow function ensures optimum visibility. The cordless drill driver also has sophisticated protection against dust and splash water. The motor brakes guarantee more control as well as precise screwdriving; the rubberised, ergonomic handle and compact design ensure a secure grip and comfortable working. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DDF 482 - Idle speed 1st gear: 0 - 600 min-1 - Idle speed 2nd gear: 0 - 1,900 min-1 - Drilling capacity in wood: 38 mm - Drilling capacity in steel: 13 mm - Torque soft: 36 Nm - Torque hard: 62 Nm - Drill chuck clamping width: 1.5 - 13 mm - Battery voltage: 18 V - Dimensions (LxWxH): 185x79x249 mm - Weight (without battery/side handle): 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita MAKPAC size 3 plastic case - without insert (821551-8) - 1x Makita suitable insert for angle grinder DGA 511 513 517 ( 839252-4 ) Product Description: The Makita MAKPAC size 3 plastic case is very robust and can be supplemented with an insert (insert not included). It is equipped with two snap locks and a carrying handle. Technical Data: - Length: approx. 395 mm; width: approx. 295 mm; height: approx. 215 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DBO 180 cordless random orbital sander - 1x sandpaper - 1x dust collector attachment - 40x Toolbrothers TURTLE 125 mm P40 - 40x Toolbrothers TURTLE 125 mm P60 - 40x Toolbrothers TURTLE 125 mm P80 - 40x Toolbrothers TURTLE 125 mm P120 - 40x Toolbrothers TURTLE 125 mm P180 - 40x Toolbrothers TURTLE 125 mm P240 - without battery, without charger Product Description: The Makita DBO 180 is a handy random orbital sander and impresses with its very precise guidance and low vibration thanks to its eccentric alignment to the centre of the machine. Dust is extracted through the base plate and an external dust extractor can be connected. Furthermore, the Makita DBO 180 has a 3-stage electronic speed setting for optimum working in different conditions. Technical Data: - Idle speed level 1: 7,000 rpm - Idle speed level 2: 9,500 rpm - Idle speed level 3: 11,00 rpm - Eccentric: 1.4 mm - Sanding paper attachment: Velcro - Sanding paper: 125 mm - Oscillating circuit: 2.8 mm - Battery voltage: 18 V - Dimensions (LxWxH): 175x123x153 mm - Weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DTD 172 cordless impact wrench - 1x Makita Makpac case - 1x universal insert - without battery, without charger Product Description: The Makita DTD 172 is an extremely compact and lightweight cordless impact wrench with a 1/4" drive shank. Thanks to its new one-touch bit installation, it is particularly easy to use. With a maximum tightening torque of 180 Nm, it is ideal for fast and efficient screwdriving. A special highlight of the DTD 172 is the bright LED work light, which not only illuminates the work surface perfectly, but can also be used as a hand lamp. This means you always have a perfect view of your work. Thanks to the rubberised handle, the impact wrench sits comfortably in the hand, making it easy to work with. The new quick switch button directly above the switch allows you to quickly switch between the registered and current application mode. Its bit holder has also been improved. Two ball bearings hold the bit securely in place and reduce annoying wobbling. The impact wrench's brushless motor efficiently adapts the torque and speed to changing requirements. Another advantage of the Makita DTD 172 is the deep discharge protection. The tool switches off automatically when the battery is almost empty. This ensures a long battery life. Technical Data: - Manufacturer: Makita - Manufacturer designation: DTD 172 - Battery voltage: 18 V - LXT battery system: Yes - Brushless motor: Yes - Idle speed: 0 - 1100 / 2100 / 3200 / 3600 min-¹ - Max. torque: 180 Nm - Standard screws: M5 - M16 - Machine screws: M4 - M8 - High-strength screws: M5 - M14 - (Idle) impact speed: 0 - 1 100 / 2 600 / 3 600 / 3 800 min-¹ - Weight incl. battery (EPTA): 1.2 - 1.5 kg - Product dimensions (L x W x H): 114 x 81 x 236 mm - Battery type: Li-ion - Sound power level (LWA): 108 dB(A) - Sound pressure level (LpA): 97 dB(A) - K-value noise: 3 dB(A) - Vibration impact screws at full load: 13.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DUH 506 cordless hedge trimmer - 1x storage container ( 413L91-8 ) - without battery, without charger Product Description: The Makita DUH506 is a cordless hedge trimmer that is characterised by its powerful and efficient 18 V drive with brushless motor. This maintenance-free and durable motor enables cordless cutting of branches with a diameter of up to 20 mm. With a 50 cm long shear blade, it is ideal for trimming hedges quickly. The hedge trimmer is not only ideal for private use, but also for semi-professional applications, as it works particularly efficiently thanks to the low energy consumption of the motor. It is also equipped with XPT technology (Extreme Protection Technology), which offers optimum protection against dust and splash water, even under tough conditions. Safety features such as a motor brake and deep discharge protection, which automatically switches the tool off when the battery is almost empty, round off the functions of the Makita DUH506 and make it a reliable choice for gardening work. Technical Data: - Manufacturer: Makita - Manufacturer's description: DUH506 - Battery voltage: 18 V - Brushless motor: Yes - Battery system: LXT - Running time 18V / 6.0 Ah: 75 min - Cutting length: 500 mm - Sound power level (LWA): 88 dB(A) - Sound pressure level (LpA): 80 dB(A) - K-value noise: 3 dB(A) - Weight incl. battery: 2.5 - 2.9 kg - Product dimensions (L x W x H): 897 x 207 x 185 mm - Max. Cutting thickness: 20 mm - Battery type: Li-ion - Max. Power output: 320 W - (Idle) stroke rate: 4000 min-¹ - Vibration values, cutting a hedge: ≤ 2.5 / ≤ 2.5 m/s² - Vibration uncertainty factor (K value), cutting a hedge: 1.5 m/s² - Blade spacing: 30 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DGA 513 cordless angle grinder - 1x Makita Makpac 3 system case with insert - 1x Makita 125mm grinding disc (A-80656) - 1x assembly tool - 1x additional handle - 1x protective cover - 1x operating instructions - without battery and charger Product Description: The Makita DGA 513 is a very handy, 18 volt, Li-Ion battery-powered angle grinder for cutting discs up to 125 mm in diameter. Thanks to Active Feedback sensing Technology (AFT), the motor stops immediately if the tool jams, thus protecting the user and those around them from accidents. The tool is also optimally protected against dust and splash water by Xtreme Protect Technology (XPT). The Makita 18V angle grinder also features Automatic Torque Drive Technology (ADT), which adapts the speed to every requirement during operation in order to achieve optimum performance. The Makita DGA 513 also features a motor brake, soft start and electronically adjustable speed for optimum comfort and perfect working conditions. The brushless motor also ensures longer endurance and a longer service life. The practical LED display warns of low battery voltage and overloading of the device. Technical Data: - Idle speed: 3,000 - 8,500 rpm - Grinding disc diameter: 125 mm - Bore: 22.23 mm - Battery voltage: 18 V - Dimensions (LxWxH) mm: 382x130x151 - Weight (without battery): 2.3 kg - Sound pressure level (LpA): 79 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DUM 111 cordless grass shears - 1x grass cutter 11 cm ( 191N23-4 ) - 1x hedge cutter bar 20 cm (191N24-2) - 1x Blade bar guard, gearbox side ( 413429-5 ) - 1x cutter bar guard 110 cm ( 413885-9 ) - 1x oil bottle ( 188369-3 ) - without battery, without charger Product Description: With the DUM 111, Makita offers a handy cordless grass and shrub shear for cutting grass and pruning shrubs. The different blades for cutting grass and shrubs can be changed quickly and easily without tools. The shears are very easy to use thanks to their low weight and lightweight, compact design. Makita is a leading manufacturer of power tools that is characterised above all by its high quality of workmanship and its huge 18 V ecosystem Technical Data: - Manufacturer: Makita - Manufacturer's designation: DUM 111 - Battery voltage: 18 V - Battery series: LXT - Stroke rate: 2500 min-¹ - Cutting height adjustment: 3 - Cutting width: 11 cm - Central cutting height adjustment: 10 - 25 mm - Cutting length: 200 mm - Machine weight incl. battery (EPTA): 1.4 - 1.7 kg - Product dimensions (L x W x H): 333 x 120 x 131 mm - Battery type (Ni-MH/Li-ion: Li-ion) - Vibration: = 2.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Lieferumfang:- 1x Makita DUH 502 Z Akku-Heckenschere- Ohne Akku, ohne LadegerätProduktbeschreibung:Die Makita DUH 502 Z Akku Heckenschere besteht aus einem Griff mit 5 Positionen. Arretierungen bei 0° sowie 45 ° und 90° links und rechts für angenehmes Arbeiten in jeder Haltung. Sie ist kraftvoll, effektiv und gut ausbalanciert durch die Platzierung des Akkus am hinteren Griffende. Durch das geringe Gewicht ist die Arbeit mit der DUH 502 kraftschonend. Mit regelbarer elektronischer Hubzahl arbeitet Sie in 3 Stufen. Ebenso enthält die Heckenschere ein Bürstenlosen Motor für mehr Ausdauer, längere Lebensdauer und kompaktere Bauweise. Für ein schnelleren Start, wird die DUH 502 mit Akkus betrieben.Technische Daten:Schnittlänge: 500mm K-Wert Geräusch: 3 dB(A)Messerlänge: 500 mm 600 mm 750 mm Gesamtlänge: 1.016 mm 1.121 mm 1.261 mm Hubzahl pro Minute: 0 - 2.000 / 0 - 3.600 / 0 - 4.400 Nennspannung: 18 V GleichstromNettogewicht: 3,8 - 4,5 kgBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!

Read more less

Scope of Delivery: - 1 x Makita DTW 190 cordless impact wrench - without battery, without charger Product Description: The Makita DTW190 is a handy and compact impact wrench, ideal for working with M8 to M16 screws. This small and lightweight tool is easy to use and offers an impressive tightening torque of up to 190 Nm despite its compact size. It has a practical LED light that optimally illuminates the work area, improving visibility and precision in low light conditions. Another safety feature is the deep discharge protection, which automatically switches the tool off when the battery level is too low. The compact and ergonomic design minimises user fatigue and the electric brake contributes to increased operator safety. Technical Data: - Manufacturer: Makita - Manufacturer designation: DTW 190 - Battery voltage: 18 V - Battery series: LXT - Max. Tightening torque: 190 Nm - Idle speed: 0 - 2300 min-¹ - Impact speed: 0 - 3000 min-¹ - External square drive: 1/2 " - Standard screws: M8 - M16 - High-strength screws: M8 - M12 - Sound power level (dB): 105 dB(A) - Sound pressure level (dB): 94 dB(A) - K-value noise: 3 dB(A) - Weight with battery: 1.4 - 1.8 kg - Product dimensions (L x W x H): 176 x 79 x 237 mm - Max. Output power: 210 W - Vibration values, tightening under maximum load: 8.5 m/s² - Vibration uncertainty factor (K value), tightening under maximum load: 1.5 m/s² - Weight without battery: 1.1 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DGA 452 cordless angle grinder - 1x protective cover - 1x side handle - 1x assembly spanner - without battery, without charger Product Description: The Makita DGA 452 is a handy cordless angle grinder that impresses with its powerful motor. The machine has a restart lock and an LED lamp that warns of motor overload. The carbon brushes are very easy to change from the outside. The rubberised handles ensure optimum handling and a secure grip when working. With the Makita battery combination programme, you can also systematically expand your range with additional batteries and machines from the Li-Ion 18V series and combine the products as required. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DGA452 - Battery voltage: 18 V - Battery system: LXT - Battery type: Li-Ion - Idle speed: 11000 min-¹ - Spindle thread: M14 - Bore diameter: 22.23 mm - Grinding disc diameter: 115 mm - Vibration level, grinding of the disc: ≤ 2.5 m/s² - Vibration uncertainty (K-factor), disc grinding: 1.5 m/s² - Vibration level, flat grinding: 10.0 m/s² - Vibration uncertainty (K-factor), flat grinding: 1.5 m/s² - Sound pressure level (LpA): 79 dB(A) - Noise measurement uncertainty (K-factor): 3 dB(A) - Product dimensions (L x W x H): 317 x 129 x 126 mm - Weight incl. battery: 2.0 - 2.3 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DC 18 RD double quick charger Product Description: The DC 18 RD is a double quick charger from Makita with which 2 batteries can be charged simultaneously. The quick charger can charge all 14.4 V and 18 V batteries from the LXT battery system. The clear status area on the dual quick charger provides information about the charge status of the battery, the readiness of the quick charger or a fault. After a successful charging process, an optional melody sounds, which can be customised. Makita is a leading manufacturer of power tools, which is characterised above all by its high quality of workmanship and its huge 18 V battery system. Technical Data: - Manufacturer: Makita - Manufacturer's description: DC 18 RD - Manufacturer number: 196933-6 - Battery voltage: 14.4 - 18 V - Charging current: 9 A - Battery system: LXT - Charging time 1.3 Ah: 15 min - Charging time 1.5 Ah: 15 min - Charging time 2.0 Ah: 24 min - Charging time 3.0 Ah: 22 min - Charging time 4.0 Ah: 36 min - Charging time 5.0 Ah: 45 min - Charging time 6.0 Ah: 55 min - Length of mains cable: 2.0 m - Product weight: 2.1 kg - Product dimensions (L x W x H): 205 x 340 x 100 mm - Supported battery type (Ni-Cd / Li-Ion): Li-ion - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHR 171 18V Li-Ion brushless cordless hammer drill solo - 1x side handle with depth stop - 1x Makita Makpac III transport case - 1x foam nap foam insert 39 x 29 x 7cm universal - without battery, without charger Product Description: The 18 V cordless rotary hammer DHR 171 from Makita impresses with its high performance despite its compact size. The device comes with a carbon brushless brushless motor, which works more efficiently than a conventional motor and is virtually wear-free. The housing of the device has been designed to absorb the vibration of the percussion mechanism and therefore guarantees comfortable working. The rotary hammer has a clutch that switches off silently and the motor enables a high speed for fast work progress. Handling is optimised by the handle with depth stop and the rubberised handle, guaranteeing a secure grip at all times. Technical Data: - Idle speed: 0 - 680 1/min - Rated voltage: 18 V - Impact speed: Max. 4,800 1/min - Impact energy: 1.20 joules - Drill diameter concrete: Ø 17 mm - Drill diameter wood: Ø 13 mm - Drill diameter steel: Ø 10 mm - Weight without battery: 1700 g - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DAS 180 Z cordless blower - 1x nozzle round ( 191X11-1 ) - 1x round nozzle ( 191X13-7 ) - 1x round nozzle ( 191X15-3 ) - 1x pointed nozzle ( 191X17-9 ) - 1x wide jet nozzle ( 191X19-5 ) - 1x accessory bag ( 831304-7 ) - without battery, without charger Product Description: The Makita DAS 180 Z cordless blower is a powerful and compact blower that is suitable for both professional and home use thanks to its wide range of applications. It has a brushless, maintenance-free and durable motor that is powered by an 18 V battery. With a variety of nozzles, the cordless blower can be used for a wide range of applications - from filter mats to inflatable toys and deflation. Thanks to the 4-stage air volume setting, the blower's performance can be increased to up to 1.1 m³/min. It also has a lock for continuous operation and a bright LED. With the Makita DAS 180 Z cordless blower, you get a high-quality blower that offers you a wide range of applications. Technical Data: - Manufacturer: Makita - Manufacturer designation: DAS 180 Z - LXT battery system: Yes - Battery voltage: 18 V - Battery protection system: Yes - Air speed: 0 - 200 m/s - Blowing force: 0 - 1.1 / 1.7 / 2.3 / 2.8 N - Air volume: 0 - 1.1 m³/min - Product weight: 1.7 kg - Weight incl. battery (EPTA): 1.2 - 1.7 kg - Product dimensions (L x W x H): 173 x 92 x 247 mm - Drive type: Battery - Battery systems: LXT 18V/36V - Max. Vacuum: 103 mbar - Maximum pressure: 0.297 bar - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less