Makita

Scope of Delivery: - 1x Makita DHP 490 cordless impact drill - 2x Makita BL 1860 B 18 V 6.0 Ah battery - 1x Makita DC 18 RC cordless quick charger - 1x Makita Makpac system case - 1x universal insert Product Description: The Makita DHP 490 cordless impact drill is a powerful and versatile machine that is suitable for both screwdriving and drilling work with and without impact function. With a maximum torque of 50 Nm (hard) and 27 Nm (soft), the device offers enough power for a wide range of applications. Equipped with a mechanical 2-speed gearbox, the DHP 490 enables fast drilling in light materials in high-speed mode as well as precise work requiring high torque in low-speed mode. The torque can be finely adjusted in 20 stages between approximately 1 and 5 Nm, allowing the user to tailor the power precisely to their needs. The impact drill is equipped with dual LED lighting that illuminates the work area well, even in dark or poorly lit environments, to ensure high precision in all tasks. Another highlight is the Makita XPT system, which effectively protects the machine from water and dust, ensuring reliable operation even under difficult conditions. The ergonomically designed handle ensures maximum comfort, even during prolonged use, and the conveniently located reverse switch makes operation easier by allowing quick switching between forward and reverse rotation. The built-in battery protection circuit protects the device from overload, overheating and over-discharge, thus contributing to the machine's longevity. A quick-release drill chuck allows for easy accessory changes and ensures that the drill driver is ready for use in no time. The integrated LED light with pre- and post-lighting functions provides optimum illumination of the work area, increasing efficiency when working in dark environments. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DHP 490 ZJ - Battery voltage: 18 V - Battery series LXT: Yes - Battery type (Ni-MH/Li-Ion): Li-ion - Brushless motor: Yes - No-load speed: 0 - 500 / 1900 rpm - Max. torque hard / soft: 50 / 27 Nm - Max. torque: 65 Nm - Torque settings: 20 - Impact rate: 0 - 7500 / 28500 rpm - Max. drilling capacity in wood: 38 mm - Max. drilling capacity in masonry: 13 mm - Max. drilling capacity in steel: 13 mm - Max. drilling capacity in wood (auger bit): 38 mm - Max. drilling capacity in wood (self-tapping drill): 38 mm - Drilling capacity with flat milling cutters: 40 mm - Drilling capacity with hole saws: 51 mm - Mounting shank: 1/2"-20UNF - Chuck capacity: 1.5 - 13 mm - Electronic brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value) drilling in metal: 1.5 m/s² - Vibration values, hammer drilling in concrete: 8.1 m/s² - Vibration uncertainty factor (K value) impact drilling in concrete: 1.5 m/s² - Sound power level (dB): 96 dB(A) - Sound pressure level (dB): 88 dB(A) - K value noise: 3 dB(A) - Product dimensions (L x W x H): 172 x 81 x 255 mm - Weight with battery: 1.4 - 1.7 kg - Weight without battery: 1.0 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 490 cordless impact drill - 1x Makita BL 1850 B 18 V 5.0 Ah battery - 1x Makita DC 18 RC cordless quick charger - 1x Makita Makpac system case - 1x universal insert Product Description: The Makita DHP 490 cordless impact drill is a powerful and versatile machine that is suitable for both screwdriving and drilling work with and without impact function. With a maximum torque of 50 Nm (hard) and 27 Nm (soft), the device offers enough power for a wide range of applications. Equipped with a mechanical 2-speed gearbox, the DHP 490 enables fast drilling in light materials in high-speed mode as well as precise work requiring high torque in low-speed mode. The torque can be finely adjusted in 20 stages between approximately 1 and 5 Nm, allowing the user to tailor the power precisely to their needs. The impact drill is equipped with dual LED lighting that illuminates the work area well, even in dark or poorly lit environments, to ensure high precision in all tasks. Another highlight is the Makita XPT system, which effectively protects the machine from water and dust, ensuring reliable operation even under difficult conditions. The ergonomically designed handle ensures maximum comfort, even during prolonged use, and the conveniently located reverse switch makes operation easier by allowing quick switching between forward and reverse rotation. The built-in battery protection circuit protects the device from overload, overheating and over-discharge, thus contributing to the machine's longevity. A quick-release drill chuck allows for easy accessory changes and ensures that the drill driver is ready for use in no time. The integrated LED light with pre- and post-lighting functions provides optimum illumination of the work area, increasing efficiency when working in dark environments. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DHP 490 ZJ - Battery voltage: 18 V - Battery series LXT: Yes - Battery type (Ni-MH/Li-Ion): Li-ion - Brushless motor: Yes - No-load speed: 0 - 500 / 1900 rpm - Max. torque hard / soft: 50 / 27 Nm - Max. torque: 65 Nm - Torque settings: 20 - Impact rate: 0 - 7500 / 28500 rpm - Max. drilling capacity in wood: 38 mm - Max. drilling capacity in masonry: 13 mm - Max. drilling capacity in steel: 13 mm - Max. drilling capacity in wood (auger bit): 38 mm - Max. drilling capacity in wood (self-tapping drill): 38 mm - Drilling capacity with flat milling cutters: 40 mm - Drilling capacity with hole saws: 51 mm - Mounting shank: 1/2"-20UNF - Chuck capacity: 1.5 - 13 mm - Electronic brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value) drilling in metal: 1.5 m/s² - Vibration values, hammer drilling in concrete: 8.1 m/s² - Vibration uncertainty factor (K value) impact drilling in concrete: 1.5 m/s² - Sound power level (dB): 96 dB(A) - Sound pressure level (dB): 88 dB(A) - K value noise: 3 dB(A) - Product dimensions (L x W x H): 172 x 81 x 255 mm - Weight with battery: 1.4 - 1.7 kg - Weight without battery: 1.0 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 490 cordless impact drill - 1x Makita BL 1860 B 18 V 6.0 Ah battery - without charger Product Description: The Makita DHP 490 cordless impact drill is a powerful and versatile machine that is suitable for both screwdriving and drilling work with and without impact function. With a maximum torque of 50 Nm (hard) and 27 Nm (soft), the device offers enough power for a wide range of applications. Equipped with a mechanical 2-speed gearbox, the DHP 490 enables fast drilling in light materials in high-speed mode as well as precise work requiring high torque in low-speed mode. The torque can be finely adjusted in 20 stages between approximately 1 and 5 Nm, allowing the user to tailor the power precisely to their needs. The impact drill is equipped with dual LED lighting that illuminates the work area well, even in dark or poorly lit environments, to ensure high precision in all tasks. Another highlight is the Makita XPT system, which effectively protects the machine from water and dust, ensuring reliable operation even under difficult conditions. The ergonomically designed handle ensures maximum comfort, even during prolonged use, and the conveniently located reverse switch makes operation easier by allowing quick switching between forward and reverse rotation. The built-in battery protection circuit protects the device from overload, overheating and over-discharge, thus contributing to the machine's longevity. A quick-release drill chuck allows for easy accessory changes and ensures that the drill driver is ready for use in no time. The integrated LED light with pre- and post-lighting functions provides optimum illumination of the work area, increasing efficiency when working in dark environments. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DHP 490 - Battery voltage: 18 V - Battery series LXT: Yes - Battery type (Ni-MH/Li-Ion): Li-ion - Brushless motor: Yes - No-load speed: 0 - 500 / 1900 rpm - Max. torque hard / soft: 50 / 27 Nm - Max. torque: 65 Nm - Torque settings: 20 - Impact rate: 0 - 7500 / 28500 rpm - Max. drilling capacity in wood: 38 mm - Max. drilling capacity in masonry: 13 mm - Max. drilling capacity in steel: 13 mm - Max. drilling capacity in wood (auger bit): 38 mm - Max. drilling capacity in wood (self-tapping drill): 38 mm - Drilling capacity with flat milling cutters: 40 mm - Drilling capacity with hole saws: 51 mm - Mounting shank: 1/2"-20UNF - Chuck capacity: 1.5 - 13 mm - Electronic brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value) drilling in metal: 1.5 m/s² - Vibration values, hammer drilling in concrete: 8.1 m/s² - Vibration uncertainty factor (K value) for hammer drilling in concrete: 1.5 m/s² - Sound power level (dB): 96 dB(A) - Sound pressure level (dB): 88 dB(A) - K value noise: 3 dB(A) - Product dimensions (L x W x H): 172 x 81 x 255 mm - Weight with battery: 1.4 - 1.7 kg - Weight without battery: 1.0 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 490 cordless impact drill - 1x Makita BL 1850 B 18 V 5.0 Ah battery - 1x Makita DC 18 RC cordless quick charger Product Description: The Makita DHP 490 cordless impact drill is a powerful and versatile machine that is suitable for both screwdriving and drilling work with and without impact function. With a maximum torque of 50 Nm (hard) and 27 Nm (soft), the device offers enough power for a wide range of applications. Equipped with a mechanical 2-speed gearbox, the DHP 490 enables fast drilling in light materials in high-speed mode as well as precise work requiring high torque in low-speed mode. The torque can be finely adjusted in 20 stages between approximately 1 and 5 Nm, allowing the user to tailor the power precisely to their needs. The impact drill is equipped with dual LED lighting that illuminates the work area well, even in dark or poorly lit environments, to ensure high precision in all tasks. Another highlight is the Makita XPT system, which effectively protects the machine from water and dust, ensuring reliable operation even under difficult conditions. The ergonomically designed handle ensures maximum comfort, even during prolonged use, and the conveniently located reverse switch makes operation easier by allowing quick switching between forward and reverse rotation. The built-in battery protection circuit protects the device from overload, overheating and over-discharge, thus contributing to the machine's longevity. A quick-release drill chuck allows for easy accessory changes and ensures that the drill driver is ready for use in no time. The integrated LED light with pre- and post-lighting functions provides optimum illumination of the work area, increasing efficiency when working in dark environments. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DHP 490 - Battery voltage: 18 V - Battery series LXT: Yes - Battery type (Ni-MH/Li-Ion): Li-ion - Brushless motor: Yes - No-load speed: 0 - 500 / 1900 rpm - Max. torque hard / soft: 50 / 27 Nm - Max. torque: 65 Nm - Torque settings: 20 - Impact rate: 0 - 7500 / 28500 rpm - Max. drilling capacity in wood: 38 mm - Max. drilling capacity in masonry: 13 mm - Max. drilling capacity in steel: 13 mm - Max. drilling capacity in wood (auger bit): 38 mm - Max. drilling capacity in wood (self-tapping drill): 38 mm - Drilling capacity with flat milling cutters: 40 mm - Drilling capacity with hole saws: 51 mm - Mounting shank: 1/2"-20UNF - Chuck capacity: 1.5 - 13 mm - Electronic brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value) drilling in metal: 1.5 m/s² - Vibration values, hammer drilling in concrete: 8.1 m/s² - Vibration uncertainty factor (K value) for hammer drilling in concrete: 1.5 m/s² - Sound power level (dB): 96 dB(A) - Sound pressure level (dB): 88 dB(A) - K value noise: 3 dB(A) - Product dimensions (L x W x H): 172 x 81 x 255 mm - Weight with battery: 1.4 - 1.7 kg - Weight without battery: 1.0 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 490 cordless impact drill - 2x Makita BL 1850 B 18 V 5.0 Ah battery - 1x Makita DC 18 RC cordless quick charger - 1x Makita Makpac system case - 1x universal insert Product Description: The Makita DHP 490 cordless impact drill is a powerful and versatile machine that is suitable for both screwdriving and drilling work with and without impact function. With a maximum torque of 50 Nm (hard) and 27 Nm (soft), the device offers enough power for a wide range of applications. Equipped with a mechanical 2-speed gearbox, the DHP 490 enables fast drilling in light materials in high-speed mode as well as precise work requiring high torque in low-speed mode. The torque can be finely adjusted in 20 stages between approximately 1 and 5 Nm, allowing the user to tailor the power precisely to their needs. The impact drill is equipped with dual LED lighting that illuminates the work area well, even in dark or poorly lit environments, to ensure high precision in all tasks. Another highlight is the Makita XPT system, which effectively protects the machine from water and dust, ensuring reliable operation even under difficult conditions. The ergonomically designed handle ensures maximum comfort, even during prolonged use, and the conveniently located reverse switch makes operation easier by allowing quick switching between forward and reverse rotation. The built-in battery protection circuit protects the device from overload, overheating and over-discharge, thus contributing to the machine's longevity. A quick-release drill chuck allows for easy accessory changes and ensures that the drill driver is ready for use in no time. The integrated LED light with pre- and post-lighting functions provides optimum illumination of the work area, increasing efficiency when working in dark environments. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DHP 490 ZJ - Battery voltage: 18 V - Battery series LXT: Yes - Battery type (Ni-MH/Li-Ion): Li-ion - Brushless motor: Yes - No-load speed: 0 - 500 / 1900 rpm - Max. torque hard / soft: 50 / 27 Nm - Max. torque: 65 Nm - Torque settings: 20 - Impact rate: 0 - 7500 / 28500 rpm - Max. drilling capacity in wood: 38 mm - Max. drilling capacity in masonry: 13 mm - Max. drilling capacity in steel: 13 mm - Max. drilling capacity in wood (auger bit): 38 mm - Max. drilling capacity in wood (self-tapping drill): 38 mm - Drilling capacity with flat milling cutters: 40 mm - Drilling capacity with hole saws: 51 mm - Mounting shank: 1/2"-20UNF - Chuck capacity: 1.5 - 13 mm - Electronic brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value) drilling in metal: 1.5 m/s² - Vibration values, hammer drilling in concrete: 8.1 m/s² - Vibration uncertainty factor (K value) impact drilling in concrete: 1.5 m/s² - Sound power level (dB): 96 dB(A) - Sound pressure level (dB): 88 dB(A) - K value noise: 3 dB(A) - Product dimensions (L x W x H): 172 x 81 x 255 mm - Weight with battery: 1.4 - 1.7 kg - Weight without battery: 1.0 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 490 cordless impact drill - 2x Makita BL 1840 B 18 V 4.0 Ah battery - 1x Makita DC 18 RC cordless quick charger - 1x Makita Makpac system case - 1x universal insert Product Description: The Makita DHP 490 cordless impact drill is a powerful and versatile machine that is suitable for both screwdriving and drilling work with and without impact function. With a maximum torque of 50 Nm (hard) and 27 Nm (soft), the device offers enough power for a wide range of applications. Equipped with a mechanical 2-speed gearbox, the DHP 490 enables fast drilling in light materials in high-speed mode as well as precise work requiring high torque in low-speed mode. The torque can be finely adjusted in 20 stages between approximately 1 and 5 Nm, allowing the user to tailor the power precisely to their needs. The impact drill is equipped with dual LED lighting that illuminates the work area well, even in dark or poorly lit environments, to ensure high precision in all tasks. Another highlight is the Makita XPT system, which effectively protects the machine from water and dust, ensuring reliable operation even under difficult conditions. The ergonomically designed handle ensures maximum comfort, even during prolonged use, and the conveniently located reverse switch makes operation easier by allowing quick switching between forward and reverse rotation. The built-in battery protection circuit protects the device from overload, overheating and over-discharge, thus contributing to the machine's longevity. A quick-release drill chuck allows for easy accessory changes and ensures that the drill driver is ready for use in no time. The integrated LED light with pre- and post-lighting functions provides optimum illumination of the work area, increasing efficiency when working in dark environments. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DHP 490 ZJ - Battery voltage: 18 V - Battery series LXT: Yes - Battery type (Ni-MH/Li-Ion): Li-ion - Brushless motor: Yes - No-load speed: 0 - 500 / 1900 rpm - Max. torque hard / soft: 50 / 27 Nm - Max. torque: 65 Nm - Torque settings: 20 - Impact rate: 0 - 7500 / 28500 rpm - Max. drilling capacity in wood: 38 mm - Max. drilling capacity in masonry: 13 mm - Max. drilling capacity in steel: 13 mm - Max. drilling capacity in wood (auger bit): 38 mm - Max. drilling capacity in wood (self-tapping drill): 38 mm - Drilling capacity with flat milling cutters: 40 mm - Drilling capacity with hole saws: 51 mm - Mounting shank: 1/2"-20UNF - Chuck capacity: 1.5 - 13 mm - Electronic brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value) drilling in metal: 1.5 m/s² - Vibration values, hammer drilling in concrete: 8.1 m/s² - Vibration uncertainty factor (K value) impact drilling in concrete: 1.5 m/s² - Sound power level (dB): 96 dB(A) - Sound pressure level (dB): 88 dB(A) - K value noise: 3 dB(A) - Product dimensions (L x W x H): 172 x 81 x 255 mm - Weight with battery: 1.4 - 1.7 kg - Weight without battery: 1.0 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 490 cordless impact drill - 1x Makita BL 1830 B 18 V 3.0 Ah battery - 1x Makita DC 18 RC cordless quick charger - 1x Makita Makpac system case - 1x universal insert Product Description: The Makita DHP 490 cordless impact drill is a powerful and versatile machine that is suitable for both screwdriving and drilling work with and without impact function. With a maximum torque of 50 Nm (hard) and 27 Nm (soft), the device offers enough power for a wide range of applications. Equipped with a mechanical 2-speed gearbox, the DHP 490 enables fast drilling in light materials in high-speed mode as well as precise work requiring high torque in low-speed mode. The torque can be finely adjusted in 20 stages between approximately 1 and 5 Nm, allowing the user to tailor the power precisely to their needs. The impact drill is equipped with dual LED lighting that illuminates the work area well, even in dark or poorly lit environments, to ensure high precision in all tasks. Another highlight is the Makita XPT system, which effectively protects the machine from water and dust, ensuring reliable operation even under difficult conditions. The ergonomically designed handle ensures maximum comfort, even during prolonged use, and the conveniently located reverse switch makes operation easier by allowing quick switching between forward and reverse rotation. The built-in battery protection circuit protects the device from overload, overheating and over-discharge, thus contributing to the machine's longevity. A quick-release drill chuck allows for easy accessory changes and ensures that the drill driver is ready for use in no time. The integrated LED light with pre- and post-lighting functions provides optimum illumination of the work area, increasing efficiency when working in dark environments. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DHP 490 ZJ - Battery voltage: 18 V - Battery series LXT: Yes - Battery type (Ni-MH/Li-Ion): Li-ion - Brushless motor: Yes - No-load speed: 0 - 500 / 1900 rpm - Max. torque hard / soft: 50 / 27 Nm - Max. torque: 65 Nm - Torque settings: 20 - Impact rate: 0 - 7500 / 28500 rpm - Max. drilling capacity in wood: 38 mm - Max. drilling capacity in masonry: 13 mm - Max. drilling capacity in steel: 13 mm - Max. drilling capacity in wood (auger bit): 38 mm - Max. drilling capacity in wood (self-tapping drill): 38 mm - Drilling capacity with flat milling cutters: 40 mm - Drilling capacity with hole saws: 51 mm - Mounting shank: 1/2"-20UNF - Chuck capacity: 1.5 - 13 mm - Electronic brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value) drilling in metal: 1.5 m/s² - Vibration values, hammer drilling in concrete: 8.1 m/s² - Vibration uncertainty factor (K value) impact drilling in concrete: 1.5 m/s² - Sound power level (dB): 96 dB(A) - Sound pressure level (dB): 88 dB(A) - K value noise: 3 dB(A) - Product dimensions (L x W x H): 172 x 81 x 255 mm - Weight with battery: 1.4 - 1.7 kg - Weight without battery: 1.0 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 485 cordless impact drill - 1x Makita DTD 153 cordless impact wrench - 2x Makita BL 1850 B 18 V 5.0 Ah battery ( 197280-8 ) - 1x Makita DC 18 RC cordless quick charger 7.2 V - 18 V ( 195584-2 ) - 1x Makita Makpac - 1 x universal insert Product Description: With the DLX 2214 TJ cordless combo kit, Makita offers a super tool set consisting of the DHP 485 cordless impact drill and the DTD 153 cordless impact wrench with associated batteries, charger and a Makpac for storage. The Makita DHP 485 impact drill driver with 2-speed all-metal planetary gearbox has a switchable impact mechanism. The integrated brushless motor ensures greater endurance, a longer service life and a more compact design. This impact drill driver is also particularly easy to handle thanks to its compact, short design. The Makita DTD 153 cordless impact wrench impresses with its handy and compact design. The brushless motor stands for an extended service life, minimum maintenance and maximum power. The DTD 153 is also equipped with speed regulation in the handle and a powerful LED, making the DTD 153 a very versatile tool. The 1/4" hexagon socket makes it easy to fit or remove various attachments. Makita is a leading manufacturer of power tools that impresses above all with its long tradition and its huge 18 V ecosystem, to which both machines here belong. Technical Data: - Manufacturer: Makita - Manufacturer designation: DLX 2283 TJ - Battery voltage: 18 V - Max. Torque (soft): 25 Nm - Max. Torque (hard): 50 Nm - Motor type: brushless - Idle speed 1st gear: 0-500 min-1 - Idle speed 2nd gear: 0-1900 min-1 - Idle speed 1st gear: 0-7500 min-1 - Idle speed 2nd gear: 0-28500 min-1 - Drill Ø wood/steel/stone: 38/13/13 mm - Drill chuck clamping width: 1.5-13 mm - Dimensions (LxWxH): 182x79x255 mm - Weight incl. packaging: 1410 g - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 485 cordless impact drill driver - 2x Makita BL 1850 B Li-Ion battery 18V 5.0 Ah - 1x Makita DC 18 RC 9.6 - 18 V battery fast charger (195584-2) Product Description: The Makita DHP 485 impact drill with 2-speed full metal planetary gearbox has an impact mechanism that can be switched off. The integrated brushless motor ensures more endurance, a longer service life and a more compact design. With bright LED for illuminating the workpiece. This impact drill driver is also particularly easy to handle thanks to its compact, short design. The speed can be sensitively adjusted. Thanks to the integrated deep discharge protection, the tool switches off automatically when the battery is low, thus protecting the battery. Makita is a leading manufacturer of electrical products, characterised by high quality and a large 18 V range. Technical Data: - Battery voltage: 18 V - Max. Torque (soft): 25 Nm - Max. Torque (hard): 50 Nm - Motor type: brushless - Idle speed 1st gear: 0-500 min-1 - Idle speed 2nd gear: 0-1900 min-1 - Idle speed 1st gear: 0-7500 min-1 - Idle speed 2nd gear: 0-28500 min-1 - Drill Ø wood/steel/stone: 38/13/13 mm - Drill chuck clamping width: 1.5-13 mm - Dimensions (LxWxH): 182x79x255 mm - Weight incl. packaging: 1410 g - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 485 Z cordless impact drill driver - 2x Makita BL1840B 18 V 4.0 Ah rechargeable battery Product Description: The Makita DHP 485 impact drill driver with 2-speed all-metal planetary gearbox has an impact mechanism that can be switched off. The integrated brushless motor ensures greater endurance, a longer service life and a more compact design. With bright LED. This impact drill driver is also particularly easy to handle thanks to its compact, short design. The speed can be sensitively adjusted. Technical Data: - Manufacturer: Makita - Manufacturer's description: DHP 485 - Battery voltage: 18 V - Torque (soft): 25 Nm - Torque (hard): 50 Nm - Motor type: brushless - Idle speed 1st gear: 0-500 min-1 - Idle speed 2nd gear: 0-1900 min-1 - Idle speed 1st gear: 0-7500 min-1 - Idle speed 2nd gear: 0-28500 min-1 - Drill Ø wood/steel/stone: 38/13/13 mm - Drill chuck clamping width: 1.5-13 mm - Dimensions (LxWxH): 182x79x255 mm - Weight incl. packaging: 1410 g - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 485 Z cordless impact drill driver - 1x Makita BL 1860 B 6.0 Ah rechargeable battery - 1x Makpac 2 system case with foam insert - without charger Product Description: The tool is designed for impact drilling in bricks, brickwork and masonry. It is also suitable for screwdriving and normal drilling in wood, metal, ceramic and plastic. The cordless impact drill with 2-speed all-metal planetary gearbox has an impact mechanism that can be switched off. The integrated brushless motor ensures greater endurance, a longer service life and a more compact design. With bright LED. This impact drill driver is also particularly easy to handle thanks to its compact, short design. The speed can be sensitively adjusted. Technical Data: - Battery voltage: 18 V - Max. Torque (soft): 25 Nm - Max. Torque (hard): 50 Nm - Motor type: brushless - Idle speed 1st gear: 0-500 min-1 - Idle speed 2nd gear: 0-1900 min-1 - Idle speed 1st gear: 0-7500 min-1 - Idle speed 2nd gear: 0-28500 min-1 - Drill Ø stone: 13 mm - Drilling Ø steel: 13 mm - Drilling Ø wood: 38 mm - Drill chuck clamping width: 1.5-13 mm - Dimensions (LxWxH): 182x79x255 mm - Weight incl. packaging: 1410 g - Sound pressure level: 82 dB (A) - Sound power level: 93 dB (A) - Measurement uncertainty (K): 3 dB (A) - Vibration emission (drilling metal): 2.5 m/s2 or less - Vibration emission (percussion drilling concrete): 8.0 m/s2 - Measurement uncertainty (K): 1.5 m/s2 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 485 cordless impact drill driver - 13x HSS-TiN metal drill bits 1-7 mm Ø - 10x masonry drill bits 3-10 mm Ø - 6x wood drill bits 3-10 mm Ø - 1x countersink - 1x PH1 25 mm bit - 1x PH2 bit 25 mm - 1x bit PH3 25 mm - 2x bit PZ1 25 mm - 3x bit PZ2 25 mm - 2x bit PZ3 25 mm - 1x bit T10 25 mm - 1x bit T15 25 mm - 1x bit T20 25 mm - 1x bit T25 25 mm - 1x bit T27 25 mm - 1x bit T30 25 mm - 1x bit H3 25 mm - 1x bit H4 25 mm - 1x bit H5 25 mm - 1x bit H6 25 mm - 2x Bit SL 0.5x3 25 mm - 2x Bit SL 0.5x4 25 mm - 2x Bit SL 0.6x4.5 25 mm - 2x Bit SL 1.0x6 25 mm - 1x Bit SL 1.2x7 25 mm - 1x Bit SL 1.2x8 25 mm - 2x depth limiter - 1x bit holder magnetic 60 mm long - 1x bit PH1 50 mm - 1x bit PH2 50 mm - 1x bit PH3 50 mm - 1x bit PZ1 50 mm - 1x bit PZ2 50 mm - 1x bit PZ3 50 mm - 1x bit T10 50 mm - 1x bit T15 50 mm - 1x bit T20 50 mm - 1x bit T25 50 mm - 1x bit T30 50 mm - 1x bit T40 50 mm - 1x bit H3 50 mm - 1x bit H4 50 mm - 1x bit H5 50 mm - 1x Bit H6 50 mm - 1x Bit SL 0.5x4 50 mm - 1x Bit SL 0.6x4.5 50 mm - 1x Bit SL 1.2x7 50 mm - 1x Bit SL 1.2x8 50 mm - 1x socket spanner 1/4" - 1x socket spanner 9/32" - 1x socket spanner 5/16" - 1x socket spanner 11/32" - 1x socket spanner 3/8" - 1x socket spanner 7/16" - 1x socket spanner 1/2" - 1x socket spanner 6 mm - 1x socket spanner 7 mm - 1x socket spanner 8 mm - 1x socket spanner 9 mm - 1x socket spanner 10 mm - 1x socket spanner 11 mm - 1x socket spanner 12 mm - 1x depth stop 3 mm Ø - 1x depth stop 5 mm Ø - 1x depth stop 8 mm Ø - 1x hexagon spanner 2.5 mm - 1x Drill jig - 1x box - without battery, without charger Product Description: The Makita DHP 485 impact drill driver with 2-speed all-metal planetary gearbox has an impact mechanism that can be switched off. The integrated brushless motor ensures greater endurance, a longer service life and a more compact design. With bright LED for illuminating the workpiece. This impact drill driver is also particularly easy to handle thanks to its compact, short design. The speed can be sensitively adjusted. Technical Data: - Manufacturer: Makita - Manufacturer designation: DHP 485 - Voltage: 18 V - Max. Torque (soft): 25 Nm - Max. Torque (hard): 50 Nm - Motor type: brushless - Idle speed 1st gear: 0-500 min-1 - Idle speed 2nd gear: 0-1900 min-1 - Idle speed 1st gear: 0-7500 min-1 - Idle speed 2nd gear: 0-28500 min-1 - Drill Ø wood/steel/stone: 38/13/13 mm - Drill chuck clamping width: 1.5-13 mm - Dimensions (LxWxH): 182x79x255 mm - Weight incl. packaging: 1410 g - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 485 cordless impact drill driver - 1x Makita BL 1860 B 6.0 Ah rechargeable battery - 1x Makita DC18RC quick charger - 1x Makita Makpac - 1x universal insert Product Description: The tool is designed for impact drilling in bricks, brickwork and masonry. It is also suitable for screwdriving and normal drilling in wood, metal, ceramic and plastic. The Makita DHP 485 impact drill driver with 2-speed all-metal planetary gearbox has an impact mechanism that can be switched off. The integrated brushless motor ensures greater endurance, a longer service life and a more compact design. With bright LED. This impact drill driver is also particularly easy to handle thanks to its compact, short design. The speed can be sensitively adjusted. Technical Data: - Battery voltage: 18 V - Max. Torque (soft): 25 Nm - Max. Torque (hard): 50 Nm - Idle speed 1st gear: 0-500 min-1 - Idle speed 2nd gear: 0-1900 min-1 - Idle speed 1st gear: 0-7500 min-1 - Idle speed 2nd gear: 0-28500 min-1 - Drill Ø stone: 13 mm - Drilling Ø steel: 13 mm - Drilling Ø wood: 38 mm - Drill chuck clamping width: 1.5-13 mm - Dimensions (LxWxH): 182x79x255 mm - Weight incl. packaging: 1410 g - Sound pressure level: 82 dB (A) - Sound power level: 93 dB (A) - Measurement uncertainty (K): 3 dB (A) - Vibration emission (drilling metal): 2.5 m/s2 or less - Vibration emission (percussion drilling concrete): 8.0 m/s2 - Measurement uncertainty (K): 1.5 m/s2 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DBO 180 cordless random orbital sander - 1x sandpaper - 1x dust collection box - 1x Makita BL 1830 B 18 V 3.0 Ah battery - 1x Makita DC 18 RC charger - 1x Makita Makpac case - 1x matching insert - 1x Toolbrothers SPIDER sanding set Mesh abrasive: - 10x Toolbrothers SPIDER 125 mm P80 - 10x Toolbrothers SPIDER 125 mm P120 - 10x Toolbrothers SPIDER 125 mm P180 - 10x Toolbrothers SPIDER 125 mm P240 Product Description: The Makita DBO 180 is a handy random orbital sander and impresses with its very precise guidance and low vibration thanks to its eccentric alignment to the centre of the machine. Dust is extracted through the base plate and an external dust extraction system can be connected. Furthermore, the Makita DBO 180 has a 3-stage electronic speed setting for optimum working in different conditions. The machine can be easily transported and stored in the Makpac with matching insert. Technical Data: - Idle speed stage 1: 7,000 rpm - Idle speed stage 2: 9,500 rpm - Idle speed stage 3: 11.00 rpm - Eccentric: 1.4 mm - Sanding paper attachment: Velcro - Sanding paper: 125 mm - Oscillating circuit: 2.8 mm - Battery voltage: 18 V - Dimensions (LxWxH): 175x123x153 mm - Weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DBO 180 cordless random orbit sander - 1x sandpaper - 1x dust collection box - 1x Makita BL 1830 B 18 V 3.0 Ah rechargeable battery - 1x Makita DC 18 RC charger - 1x Makita Makpac case - 1x matching insert Product Description: The Makita DBO 180 is a handy random orbital sander and impresses with its very precise guidance and low vibration thanks to its eccentric alignment to the centre of the machine. Dust is extracted through the base plate and an external dust extraction system can be connected. Furthermore, the Makita DBO 180 has a 3-stage electronic speed setting for optimum working in different conditions. The machine can be easily transported and stored in the Makpac with matching insert. Technical Data: - Idle speed stage 1: 7,000 rpm - Idle speed stage 2: 9,500 rpm - Idle speed stage 3: 11.00 rpm - Eccentric: 1.4 mm - Sanding paper attachment: Velcro - Sanding paper: 125 mm - Oscillating circuit: 2.8 mm - Battery voltage: 18 V - Dimensions (LxWxH): 175x123x153 mm - Weight: 1.7 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DVC 665 ZU cordless backpack vacuum cleaner - 1x AWS radio adapter WUT01 ( 198900-7 ) - 1x hose clamp (166116-2) - 1x filter bag (191C26-2) - 1x HEPA filter element ( 191D12-9 ) - 1x adapter 22 mm ( 417765-1 ) - without battery, without charger Product Description: The Makita DVC665 cordless backpack hoover combines mobility, performance and intelligent technology in a compact system for professional use. Powered by two 18V rechargeable batteries connected in series (available separately), the hoover offers powerful, cordless suction power - ideal for work on construction sites, in trades or in hard-to-reach areas. The maintenance-free, brushless motor ensures a long service life and constant performance, while a highly efficient HEPA filter reliably retains even the finest dust particles. Particularly practical: Thanks to the integrated Auto-Start Wireless System (AWS), the vacuum cleaner can be connected wirelessly to compatible power tools - it starts and stops automatically as soon as the tool is switched on. The DVC665 is equipped with padded shoulder straps for high carrying comfort and can be carried comfortably like a rucksack. The integrated deep discharge protection protects the batteries from damage and extends their service life by automatically switching off the tool when the battery is almost empty. An all-round well thought-out device for clean, efficient work with maximum freedom of movement. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DVC 665 ZU - Battery voltage: 2x 18 V - Battery system LXT: Yes - Brushless motor: Yes - Air volume: 1.8 m³/min - Max. Vacuum: 110 mbar - Running time 18 V / 5.0 Ah: 60 / 33 min - Running time 18V / 6.0 Ah: 75 / 40 min - Hose length: 1.5 m - Hose diameter: 28 mm - Max. container volume: 6.0 L - Sound pressure level (LpA): 70 dB(A) - K-value noise: 2.5 dB(A) - Vibration: ≤ 2.5 m/s² - K-value vibration: 1.5 m/s² - Weight incl. battery: 6.1 - 6.7 kg - Product dimensions (L x W x H): 297 x 174 x 523 mm - Battery type: Li-ion - Product weight: 5.4 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita standard protective cover tool-free 125 mm Product Description: This Makita standard guard is suitable for angle grinders with a cutting and grinding disc diameter of up to 125 mm. Removing and fitting the protective cover without tools is child's play. It is closed on one side and is therefore perfect for cutting and grinding as well as roughing. It is suitable for the angle grinders DGA 504 / 511 / 513 / 515 / 517 / GA 5030 R / GA 5030 RSP1 / GA 5040 R / GA 5040 CZ1 / GA 5040 RZ1 / GA 5041 C01 and GA 5080 RX02. Makita is a leading power tool manufacturer with a long tradition of outstanding quality. Technical Data: - Manufacturer: Makita - Manufacturer number: 123145-8 - Diameter: 125 mm - Suitable for: DGA 504 / 511 / 513 / 515 / 517 / GA 5030 R / GA 5030 RSP1 / GA 5040 R / GA 5040 CZ1 / GA 5040 RZ1 / GA 5041 C01 / GA 5080 RX02 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita UR100D cordless lawn trimmer - 1x Single shoulder strap ( 125516-5 ) - 1x 1-thread head Tap&Go (198854-8) - 1x 4 mm hexagon spanner (783202-0) - 1x accessory bag ( 831304-7 ) - without battery, without charger Product Description: With the UR100D, Makita offers a handy and compact cordless grass trimmer. Thanks to the balanced weight distribution and the infinitely variable, telescopically adjustable shaft, the machine can be customised to suit your own height. The high speed of the device combined with the easy handling and low weight counteract the typical signs of fatigue and ensure a pleasant level of comfort when working. The Xtreme Protection Technology ( XPT ) offers optimum protection against dust and splash water. The machine also has a soft start. Makita is a leading manufacturer of power tools of all kinds, characterised above all by a long tradition and high quality workmanship. Technical Data: - Manufacturer: Makita - Manufacturer's designation: UR100D - Idle speed: 10 000 min-¹ - Mowing width: 230 - 260 mm - Spindle thread: M8 x 1.25 RH - Thread thickness: 1.65 mm - Machine weight incl. battery (EPTA): 9 - 2.1 kg - Product dimensions (L x W x H): 1202 x 267 x 315 mm - Battery voltage: 12 V - Sound pressure level (dB): 74 dB(A) - K-value noise: 0.74 dB(A) - Vibration: ≤ 2.5 m/s² - K-value vibration: 0.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DBN 500 cordless upright nailer - 2 x BL 1850 B battery with 5 Ah - 18 V - 1x Makita DC 18 RC 7.2 - 18 V battery fast charger for Li-Ion battery (195584-2) - 1x Makita MakPac - 1x universal insert - 5x Prebena J50CNKHA upsetting head nails galvanised hardened 4000 pieces Product Description: The Makita DBN 500 is equipped with a safety catch and an adjustable depth setting. This makes it easy to switch from single to series triggering. The safety catch increases safety in the workplace. The cordless upright nailer achieves a wall clearance of just 28 mm. A viewing window is integrated for easy control of the nail supply. It is versatile, compact and can use batteries of up to 6.0 Ah. The DBN 500 upsetting head nailer can be used with Makita upsetting head nails, but is also compatible with suitable upsetting head nails from other manufacturers. Technical Data: - Manufacturer: Makita - Manufacturer designation: DBN 500 - Battery voltage: 18 V - Pin length: 15 - 50 mm - Wire thickness: 1.2 mm - Magazine capacity: 110 - Battery protection system: Yes - Weight incl. battery (EPTA): 3.2 - 3.5 kg - Product dimensions (L x W x H): 249 x 97 x 318 mm - Battery system: LXT - Gauge: 18 Ga - Sound pressure level (LpA): 79 dB(A) - K-value noise: 3 dB(A) - Vibration: ≤ 2.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DBN 500 cordless upright nailer - 20000x Prebena J50CNKHA upsetting head nails galvanised hardened - 1x Makita MakPac - 1x universal insert - without battery, without charger Product Description: The Makita DBN 500 is equipped with an empty stroke safety device and an adjustable depth stop. This makes it easy to switch from single to series triggering. The safety catch increases safety in the workplace. The cordless upright nailer achieves a wall clearance of just 28 mm. A viewing window is integrated for easy control of the nail supply. It is versatile, compact and can use batteries of up to 6.0 Ah. The DBN 500 upsetting head nailer can be used with Makita upsetting head nails, but is also compatible with suitable upsetting head nails from other manufacturers. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DBN 500 - Battery voltage: 18 V - Pin length: 15 - 50 mm - Wire thickness: 1.2 mm - Magazine capacity: 110 - Battery protection system: Yes - Weight incl. battery (EPTA): 3.2 - 3.5 kg - Product dimensions (L x W x H): 249 x 97 x 318 mm - Battery system: LXT - Gauge: 18 Ga - Sound pressure level (LpA): 79 dB(A) - K-value noise: 3 dB(A) - Vibration: ≤ 2.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DBN 500 cordless upright nailer - 20000x Prebena J50CNKHA upsetting head nails galvanised hardened - 1x Makita MakPac - 1x universal insert - without battery, without charger Product Description: The Makita DBN 500 is equipped with an empty stroke safety device and an adjustable depth stop. This makes it easy to switch from single to series triggering. The safety catch increases safety in the workplace. The cordless upright nailer achieves a wall clearance of just 28 mm. A viewing window is integrated for easy control of the nail supply. It is versatile, compact and can use batteries of up to 6.0 Ah. The DBN 500 upsetting head nailer can be used with Makita upsetting head nails, but is also compatible with suitable upsetting head nails from other manufacturers. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DBN 500 - Battery voltage: 18 V - Pin length: 15 - 50 mm - Wire thickness: 1.2 mm - Magazine capacity: 110 - Battery protection system: Yes - Weight incl. battery (EPTA): 3.2 - 3.5 kg - Product dimensions (L x W x H): 249 x 97 x 318 mm - Battery system: LXT - Gauge: 18 Ga - Sound pressure level (LpA): 79 dB(A) - K-value noise: 3 dB(A) - Vibration: ≤ 2.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DGA 520 cordless angle grinder - 1x side handle 36 cpl. ( 158237-4 ) - 1x protective cover 125 mm ( 347618-9 ) - 1x Makita BL 1850 B rechargeable battery 18 V 5.0 Ah - 1x Makita DC 18 RC charger Product Description: The Makita DGA520 cordless angle grinder is a powerful and handy helper for demanding jobs. With a maximum disc diameter of 125 mm, it is versatile and impresses with its innovative X-LOCK quick-change system, which enables the grinding discs to be changed quickly and easily. Safety is the top priority with this angle grinder: The Active Feedback sensing technology automatically stops the machine if a blockage occurs, preventing dangerous kickback. The DGA520 is also equipped with restart protection, which prevents unintentional start-up after a power interruption. The combination of convenience, safety and efficiency makes this cordless angle grinder the ideal tool for demanding users. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DGA520 - Battery voltage: 18 V - Battery system: LXT - Battery type: Li-ion - Brushless motor: Yes - Idle speed: 8500 min-¹ - Bore: 22.23 mm - Max. Disc Ø: 125 mm - Restart protection: Yes - Anti-restart function: Yes - Motor brake: Yes - Vibration values, surface grinding (roughing): 7.0 m/s² - Vibration uncertainty factor (K value), surface grinding (roughing): 1.5 m/s² - Sound power level (LWA): 91 dB(A) - Sound pressure level (LpA): 83 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 376 x 140 x 147 mm - Weight incl. battery: 2.4 - 3.0 kg - Product weight: 1.8 kg - Max. Cutting depth: 32 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DGA 520 cordless angle grinder - 1x side handle 36 cpl. ( 158237-4 ) - 1x protective cover 125 mm ( 347618-9 ) - 2x Makita BL 1860 B rechargeable battery 18 V 6.0 Ah - 1x Makita DC 18 RC charger Product Description: The Makita DGA520 cordless angle grinder is a powerful and handy helper for demanding jobs. With a maximum disc diameter of 125 mm, it is versatile and impresses with its innovative X-LOCK quick-change system, which enables the grinding discs to be changed quickly and easily. Safety is the top priority with this angle grinder: The Active Feedback sensing technology automatically stops the machine if a blockage occurs, preventing dangerous kickback. The DGA520 is also equipped with restart protection, which prevents unintentional start-up after a power interruption. The combination of convenience, safety and efficiency makes this cordless angle grinder the ideal tool for demanding users. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DGA520 - Battery voltage: 18 V - Battery system: LXT - Battery type: Li-ion - Brushless motor: Yes - Idle speed: 8500 min-¹ - Bore: 22.23 mm - Max. Disc Ø: 125 mm - Restart protection: Yes - Anti-restart function: Yes - Motor brake: Yes - Vibration values, surface grinding (roughing): 7.0 m/s² - Vibration uncertainty factor (K value), surface grinding (roughing): 1.5 m/s² - Sound power level (LWA): 91 dB(A) - Sound pressure level (LpA): 83 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 376 x 140 x 147 mm - Weight incl. battery: 2.4 - 3.0 kg - Product weight: 1.8 kg - Max. Cutting depth: 32 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DGA 520 cordless angle grinder - 1x side handle 36 cpl. ( 158237-4 ) - 1x protective cover 125 mm ( 347618-9 ) - 1x Makita BL 1840 B rechargeable battery 18 V 4.0 Ah - without charger Product Description: The Makita DGA520 cordless angle grinder is a powerful and handy helper for demanding jobs. With a maximum disc diameter of 125 mm, it is versatile and impresses with its innovative X-LOCK quick-change system, which enables the grinding discs to be changed quickly and easily. Safety is the top priority with this angle grinder: The Active Feedback sensing technology automatically stops the machine if a blockage occurs, preventing dangerous kickback. The DGA520 is also equipped with restart protection, which prevents unintentional start-up after a power interruption. The combination of convenience, safety and efficiency makes this cordless angle grinder the ideal tool for demanding users. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DGA520 - Battery voltage: 18 V - Battery system: LXT - Battery type: Li-ion - Brushless motor: Yes - Idle speed: 8500 min-¹ - Bore: 22.23 mm - Max. Disc Ø: 125 mm - Restart protection: Yes - Anti-restart function: Yes - Motor brake: Yes - Vibration values, surface grinding (roughing): 7.0 m/s² - Vibration uncertainty factor (K value), surface grinding (roughing): 1.5 m/s² - Sound power level (LWA): 91 dB(A) - Sound pressure level (LpA): 83 dB(A) - K-value noise: 3 dB(A) - Product dimensions (L x W x H): 376 x 140 x 147 mm - Weight incl. battery: 2.4 - 3.0 kg - Product weight: 1.8 kg - Max. Cutting depth: 32 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less