Makita

Scope of Delivery: - 1x Makita DHR 241 cordless hammer drill - 1x side handle - 1x depth stop - 2x Makita BL 1830 B 18 V 3.0 Ah rechargeable battery - 1x Makita DC 18 RC charger - 1x Makita Makpac - 1x universal insert Product Description: The Makita DHR 241 18 V hammer drill is suitable for drilling, hammer drilling and chiselling. The combi hammer impresses with its slip clutch and its 40-position chisel adjustment ensures optimum working in every situation. The tool has externally replaceable carbon brushes and thanks to a new rubber damping design, less vibration is generated. The rotary hammer is also equipped with a motor brake to ensure safe working. With the SDS-Plus holder, the attachments can be picked up quickly, without tools and protected from dust. Technical Data: - Battery voltage: 18 V - Impact force: 2.0 joules - Tool holder: SDS-Plus - Max. Idle speed: 0-1100 rpm - Max. No-load impact rate: 0-4000 blows/min - Max. Drill diameter (steel): 13 mm - Max. Drill diameter (concrete): 20 mm - Max. Drill diameter (wood): 26 mm - Sound power level (dB): 97 dB(A) - Sound pressure level (dB): 86 dB(A) - K-value noise: 3 dB(A) - Vibration drilling: 2.5 m/s² - Vibration hammer drilling in concrete: 12.5 m/s² - Vibration chiselling with side handle: 9.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DTD 173 cordless impact wrench - 2x Makita BL 1860 B rechargeable battery 18 V 6.0 Ah - 1x Makita DC 18 RC charger - 1x Makita Makpac case - 1x universal insert Product Description: The DTD173 cordless impact wrench from Makita impresses with its compact design, low weight and an impressive tightening torque of 180 Nm. This versatile tool is equipped with four specially developed screwdriving modes to meet the different requirements of everyday work. These are the wood mode, the mode for machine screws and two additional T-modes. Wood mode starts at a low speed and increases this automatically as soon as the screw is gripped until the maximum speed is reached. The screw mode automatically stops the tool in anti-clockwise rotation mode as soon as screws or nuts have been sufficiently loosened. T1 mode is ideal for fast tightening: The screw is screwed in at high speed and the impact mode starts shortly afterwards. In T2 mode, tear-out of the thread is prevented by the tool reducing the speed after the start of impact operation. A continuous light ring on the 1/4" tool holder ensures better visibility in the working area. A new bit holder with reduced resistance also makes installation easier and ensures that the bits are held more securely. With these well thought-out features, the Makita DTD173 is the perfect companion for precise and efficient work. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DTD173 - Battery voltage: 18 V - Brushless motor: Yes - Idle speed: 0 - 1100 / 2100 / 3200 / 3600 min-¹ - Torque max.: 20 / 50 / 170 / 180 Nm - (Idle) impact speed: 0 - 1100 / 2600 / 3600 / 3800 min-¹ - Standard screws: M5 - M16 - Machine screws: M4 - M8 - High-strength screws: M5 - M14 - Mounting: 1/4 " - Sound power level (LWA): 108 dB(A) - Sound pressure level (LpA): 97 dB(A) - K-value noise: 3 dB(A) - Vibration values, tightening under maximum load: 12.9 m/s² - Vibration uncertainty factor (K value), tightening under maximum load: 1.5 m/s² - Product dimensions (L x W x H): 111 x 81 x 234 mm - Weight incl. battery: 1.2 - 1.5 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHR 241 cordless hammer drill - 1x side handle - 1x depth stop - 1x Makita BL 1850 B 18 V 5.0 Ah rechargeable battery - 1x Makita DC 18 RC charger - 1x Makita Makpac - 1x universal insert Product Description: The Makita DHR 241 18 V hammer drill is suitable for drilling, hammer drilling and chiselling. The combi hammer impresses with its slip clutch and its 40-position chisel adjustment ensures optimum working in every situation. The tool has externally replaceable carbon brushes and thanks to a new rubber damping design, less vibration is generated. The rotary hammer is also equipped with a motor brake to ensure safe working. With the SDS-Plus holder, the attachments can be picked up quickly, without tools and protected from dust. Technical Data: - Battery voltage: 18 V - Impact force: 2.0 joules - Tool holder: SDS-Plus - Max. Idle speed: 0-1100 rpm - Max. No-load impact rate: 0-4000 blows/min - Max. Drill diameter (steel): 13 mm - Max. Drill diameter (concrete): 20 mm - Max. Drill diameter (wood): 26 mm - Sound power level (dB): 97 dB(A) - Sound pressure level (dB): 86 dB(A) - K-value noise: 3 dB(A) - Vibration drilling: 2.5 m/s² - Vibration hammer drilling in concrete: 12.5 m/s² - Vibration chiselling with side handle: 9.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHR 241 cordless hammer drill - 1x side handle - 1x depth stop - 1x Makita BL 1830 B 18 V 3.0 Ah rechargeable battery - 1x Makita DC 18 RC charger - 1x Makita Makpac - 1x universal insert Product Description: The Makita DHR 241 18 V hammer drill is suitable for drilling, hammer drilling and chiselling. The combi hammer impresses with its slip clutch and its 40-position chisel adjustment ensures optimum working in every situation. The tool has externally replaceable carbon brushes and thanks to a new rubber damping design, less vibration is generated. The rotary hammer is also equipped with a motor brake to ensure safe working. With the SDS-Plus holder, the attachments can be picked up quickly, without tools and protected from dust. Technical Data: - Battery voltage: 18 V - Impact force: 2.0 joules - Tool holder: SDS-Plus - Max. Idle speed: 0-1100 rpm - Max. No-load impact rate: 0-4000 blows/min - Max. Drill diameter (steel): 13 mm - Max. Drill diameter (concrete): 20 mm - Max. Drill diameter (wood): 26 mm - Sound power level (dB): 97 dB(A) - Sound pressure level (dB): 86 dB(A) - K-value noise: 3 dB(A) - Vibration drilling: 2.5 m/s² - Vibration hammer drilling in concrete: 12.5 m/s² - Vibration chiselling with side handle: 9.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHR 241 cordless hammer drill - 1x side handle - 1x depth stop - 1x Makita BL 1840 B 18 V 4.0 Ah rechargeable battery - 1x Makita Makpac - 1x universal insert Product Description: The Makita DHR 241 18 V hammer drill is suitable for drilling, hammer drilling and chiselling. The combi hammer impresses with its slip clutch and its 40-position chisel adjustment ensures optimum working in every situation. The tool has externally replaceable carbon brushes and thanks to a new rubber damping design, less vibration is generated. The rotary hammer is also equipped with a motor brake to ensure safe working. With the SDS-Plus holder, the attachments can be picked up quickly, without tools and protected from dust. Technical Data: - Battery voltage: 18 V - Impact force: 2.0 joules - Tool holder: SDS-Plus - Max. Idle speed: 0-1100 rpm - Max. No-load impact rate: 0-4000 blows/min - Max. Drill diameter (steel): 13 mm - Max. Drill diameter (concrete): 20 mm - Max. Drill diameter (wood): 26 mm - Sound power level (dB): 97 dB(A) - Sound pressure level (dB): 86 dB(A) - K-value noise: 3 dB(A) - Vibration drilling: 2.5 m/s² - Vibration hammer drilling in concrete: 12.5 m/s² - Vibration chiselling with side handle: 9.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHR 241 cordless hammer drill - 1x side handle - 1x depth stop - 1x Makita BL 1830 B 18 V 3.0 Ah rechargeable battery - 1x Makita Makpac - 1x universal insert - without charger Product Description: The Makita DHR 241 18 V hammer drill is suitable for drilling, hammer drilling and chiselling. The combi hammer impresses with its slip clutch and its 40-position chisel adjustment ensures optimum working in every situation. The tool has externally replaceable carbon brushes and thanks to a new rubber damping design, less vibration is generated. The rotary hammer is also equipped with a motor brake to ensure safe working. With the SDS-Plus holder, the attachments can be picked up quickly, without tools and protected from dust. Technical Data: - Battery voltage: 18 V - Impact force: 2.0 joules - Tool holder: SDS-Plus - Max. Idle speed: 0-1100 rpm - Max. No-load impact rate: 0-4000 blows/min - Max. Drill diameter (steel): 13 mm - Max. Drill diameter (concrete): 20 mm - Max. Drill diameter (wood): 26 mm - Sound power level (dB): 97 dB(A) - Sound pressure level (dB): 86 dB(A) - K-value noise: 3 dB(A) - Vibration drilling: 2.5 m/s² - Vibration hammer drilling in concrete: 12.5 m/s² - Vibration chiselling with side handle: 9.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 4x Makita saw blade B-05153 HCS 203 mm - 4x Makita saw blade B-16798 HCS 152 mm - 4x Makita saw blade B-05175 Bi-Metal 152 mm - 2x storage box Product Description: Makita offers a 6-piece Recipro saw blade range for cutting wood. It includes 2 saw blades each of 152 mm and 203 mm length for wood and 2 saw blades of 152 mm length for wood with nail residues. The saw blades have set teeth and are suitable for rough cuts. The saw blades are made of HCS (carbon steel) or bi-metal. Makita is a leading manufacturer of power tools, characterised by high quality workmanship and a huge 18 V ecosystem. Technical Data: - Manufacturer: Makita - Manufacturer's description: Recipro saw blade assortment A - Manufacturer number: B-44432 - Cutting length: 152 - 203 mm - Thickness: 1.0 - 1.25 mm - Material: BiM, HCS - Teeth per inch: 6 - 10 - PU: 6 - Working length: 4 x 132, 2 x 182 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 10x Makita contact protection cap for all 14.4 / 18 V LXT batteries ( 450128-8 ) Product Description: The set of 10 Makita contact protection caps provides reliable protection for all 14.4 V and 18 V LXT batteries from Makita. The robust protective caps effectively prevent short circuits and damage to the contacts and are therefore ideal for the safe transport and clean storage of your rechargeable batteries. Thanks to the custom-fit design, the caps can be fitted and removed quickly and easily, making everyday use particularly convenient. At the same time, they protect the sensitive contacts from dust, dirt and external influences, significantly extending the service life of the batteries. The set includes ten original Makita protective caps and is therefore the perfect addition for craftsmen, professionals and DIY enthusiasts who value safety, durability and tidiness. Technical Data: - Manufacturer: Makita - Manufacturer's description: Contact protection cap 14.4 / 18 V LXT - Manufacturer number: 450128-8 - Compatible with: BL1430B, BL1440, BL1450, BL1815N, BL1820B, BL1830B, BL1840B, BL1850B, BL1860B - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita sweeping brush attachment BR 400 MP ( 199318-5 ) Product Description: The Makita sweeping brush attachment BR 400 MP for the Makita DUX 60 Z with 2x 18V ( 36V ) is perfect for sweeping floors and paths. All insert tools can be changed completely without tools. Two 18 V batteries (not included) provide the tool with an extremely high level of power. It is recommended to always use two of the same batteries. Makita has equipped the DUX 60 multifunctional drive with the latest technology, so it is optimally protected against dust and splash water with Xtreme Protect Technology ( XTP ). The powerful motor features Active Feedback sensing technology, which stops the tool immediately if it jams. The three-stage electronic speed control is designed for all applications. The Makita BR 400 MP sweeping brush attachment is the perfect solution for efficient and effortless sweeping in the yard or on your driveway. This attachment is only approved for use with the following drive units: EX2650 LH, DUX60 Technical Data: - Dimensions: Length x width x height ( with brushes ) 1,145 mm x 600 mm x 362 mm - Net weight: 6.3 kg - Brush width: 600 mm - Outer diameter of the brush: 250 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DMP 180 Z cordless compressor - 1x Makita BL1850B 5.0 Ah battery ( 197280-8 ) - 1x Makita DC18RC charger ( 195584-2 ) - 1x adapter for bicycle valve - 1x French adapter - 1x adapter for balls Product Description: When it comes to inflating car/bicycle tyres, sports balls or small swimming tyres, the cordless compressor is the ideal tool. The desired pressure can be precisely preset using the display and + / - buttons. When the desired pressure is reached, the compressor switches itself off to prevent over-inflation. The compressor reaches a pressure of up to 8.3 bar. The appliance is equipped with a tool/battery protection system. This system automatically switches off the power supply in the event of overload, overheating and over-discharge in order to extend the service life of the tool and battery. The hose is 0.65 m long. The tool is small enough to stow in the boot or tool bag to take it almost anywhere. The built-in LED and ergonomic handle design ensure increased comfort. Thanks to the adapters included in the scope of delivery, the compressor is suitable for quickly and easily inflating tyres, balls and much more. Technical Data: - Voltage: 18 V - Max. Pressure: 8.3 bar - Air flow rate: 12 l/min - Hose length: 0.65 m - Work cycle: 5 minutes on/5 minutes off - Total length: 251-266 mm - Sound pressure level: 70 dB (A) - Measurement uncertainty (K): 3 dB (A) - Vibration emission (inflation): 3.6 m/s2 - Measurement uncertainty (K): 1.5 m/s2 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DMP 180 Z cordless compressor - 2x Makita BL1840B 4.0 Ah battery ( 197265-4 ) - 1x Makita DC18RC charger ( 195584-2 ) - 1x adapter for bicycle valve - 1x French adapter - 1x adapter for balls Product Description: When it comes to inflating car/bicycle tyres, sports balls or small swimming tyres, the cordless compressor is the ideal tool. The desired pressure can be precisely preset using the display and + / - buttons. When the desired pressure is reached, the compressor switches itself off to prevent over-inflation. The compressor reaches a pressure of up to 8.3 bar. The appliance is equipped with a tool/battery protection system. This system automatically switches off the power supply in the event of overload, overheating and over-discharge to extend the service life of the tool and battery. The hose is 0.65 m long. The tool is small enough to stow in the boot or tool bag to take it almost anywhere. The built-in LED and ergonomic handle design ensure increased comfort. Thanks to the adapters included in the scope of delivery, the compressor is suitable for quickly and easily inflating tyres, balls and much more. Technical Data: - Voltage: 18 V - Max. Pressure: 8.3 bar - Air flow rate: 12 l/min - Hose length: 0.65 m - Work cycle: 5 minutes on/5 minutes off - Total length: 251-266 mm - Sound pressure level: 70 dB (A) - Measurement uncertainty (K): 3 dB (A) - Vibration emission (inflation): 3.6 m/s2 - Measurement uncertainty (K): 1.5 m/s2 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DMP 180 Z cordless compressor - 2x Makita BL1860B 6,0 Ah ( 197422-4 ) - 1x Makita DC18RC charger ( 195584-2 ) - 1x adapter for bicycle valve - 1x French adapter - 1x adapter for balls Product Description: When it comes to inflating car/bicycle tyres, sports balls or small swimming tyres, the cordless compressor is the ideal tool. The desired pressure can be precisely preset using the display and + / - buttons. When the desired pressure is reached, the compressor switches itself off to prevent over-inflation. The compressor reaches a pressure of up to 8.3 bar. The appliance is equipped with a tool/battery protection system. This system automatically switches off the power supply in the event of overload, overheating and over-discharge in order to extend the service life of the tool and battery. The hose is 0.65 m long. The tool is small enough to stow in the boot or tool bag to take it almost anywhere. The built-in LED and ergonomic handle design ensure increased comfort. Thanks to the adapters included in the scope of delivery, the compressor is suitable for quickly and easily inflating tyres, balls and much more. Technical Data: - Voltage: 18 V - Max. Pressure: 8.3 bar - Air flow rate: 12 l/min - Hose length: 0.65 m - Work cycle: 5 minutes on/5 minutes off - Total length: 251-266 mm - Sound pressure level: 70 dB (A) - Measurement uncertainty (K): 3 dB (A) - Vibration emission (inflation): 3.6 m/s2 - Measurement uncertainty (K): 1.5 m/s2 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DMP 180 Z cordless compressor - 1x Makita BL1840B 4.0 Ah battery ( 197265-4 ) - 1x Makita DC18RC charger ( 195584-2 ) - 1x adapter for bicycle valve - 1x French adapter - 1x adapter for balls Product Description: When it comes to inflating car/bicycle tyres, sports balls or small swimming tyres, the cordless compressor is the ideal tool. The desired pressure can be precisely preset using the display and + / - buttons. When the desired pressure is reached, the compressor switches itself off to prevent over-inflation. The compressor reaches a pressure of up to 8.3 bar. The appliance is equipped with a tool/battery protection system. This system automatically switches off the power supply in the event of overload, overheating and over-discharge to extend the service life of the tool and battery. The hose is 0.65 m long. The tool is small enough to stow in the boot or tool bag to take it almost anywhere. The built-in LED and ergonomic handle design ensure increased comfort. Thanks to the adapters included in the scope of delivery, the compressor is suitable for quickly and easily inflating tyres, balls and much more. Technical Data: - Voltage: 18 V - Max. Pressure: 8.3 bar - Air flow rate: 12 l/min - Hose length: 0.65 m - Work cycle: 5 minutes on/5 minutes off - Total length: 251-266 mm - Sound pressure level: 70 dB (A) - Measurement uncertainty (K): 3 dB (A) - Vibration emission (inflation): 3.6 m/s2 - Measurement uncertainty (K): 1.5 m/s2 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita CCF16540E SPECIALIZED saw blade 165 x 20 mm Product Description: The Makita SPECIALIZED saw blade is a premium saw blade that has been specially developed for use in cordless circular saws. With its exact straight run-out, it ensures precise cuts and maximum efficiency. The saw blade has an extra-thin, perfectly aligned base body made of steel, which ensures precise straight running. In addition to its excellent straightness, the Makita SPECIALIZED saw blade also impresses with its long service life. Thanks to the high-quality materials and workmanship, the saw blade is particularly durable and robust and can withstand intensive use. The tooth design of the saw blade is perfect for universal cuts in wood. Whether longitudinal or cross cuts, the saw blade offers optimum performance and precision. Technical Data: - Manufacturer: Makita - Manufacturer designation: CCF16540E - Manufacturer number: B-32954 - Saw blade: 165 mm - Bore: 20 mm - Cutting width: 1.6 mm - Number of teeth: 40 - Tooth angle: 18° - Tooth shape: Specialised - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 9x Makita hole saw 40 mm ( 19 / 22 / 29 / 35 / 38 / 51 / 54 / 57 / 68 mm ) - 1x Makita adapter - 2x drill bit - 1x ejector spring - 1x aluminium case Product Description: The Makita hole saws are made of bi-metal HSS. This ensures a high level of durability and longevity. The nine 19, 22, 29, 35, 38, 51, 54, 57 and 68 mm hole saws can be used to cut a wide variety of materials such as steel, aluminium, copper, brass, wood and plastic. The hole saws can be changed quickly and easily thanks to the adapter. The set is suitable for all cordless and mains-powered drill drivers, rotary hammer drills and rotary hammers. Technical Data: - Manufacturer: Makita - Manufacturer's description: HSS BIM electrician's hole saw set - Manufacturer number: D-47282 - Diameter: 19 / 22 / 29 / 35 / 38 / 51 / 54 / 57 / 68 mm - Tooth material: Bi-metal - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DLM 432 cordless lawn mower - 1x battery cover - 1x grass catcher - 1x spanner - 4x fasteners - 1x assembly spanner - 1x sickle blade (191D43-8) - 1x Makita mulching wedge ( 191D46-2 ) - without battery, without charger Product Description: The Makita DLM 432 cordless lawn mower impresses with its environmentally friendly and cost-saving 2x18 or 36 volt drive. With a cutting width of 43 cm, it is particularly suitable for small to medium-sized lawns and has a 13-stage cutting height adjustment. The handlebar is foldable for space-saving storage and adjustable, making it suitable for all body sizes. The 50 litre grass collector tank is equipped with a manual fill level indicator (when the blue cap no longer opens during operation, the tank is full). The DLM 432 is a robust and weather-resistant lawn mower and is equipped with Xtreme Protection Technology (XPT), which guarantees optimum protection against dust and splash water even under tough conditions. A specially moulded front has been developed and installed in this model to significantly reduce the effort required to push the mower. In addition, the wheels are offset inwards to enable mowing close to the edge without constant wedging. The double battery charge level indicator is located in the user's direct field of vision. Makita is a leading power tool manufacturer characterised by quality, tradition and the world's largest eco system. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DLM 432 - Battery voltage: 2 x 18 V - Idle speed: 3600 min-¹ - Cutting height adjustment: 13 - Cutting width: 43 cm - Area coverage: 575 m² - Central cutting height adjustment: 20 - 75 mm - Diameter of the rear wheel: 16 cm - Diameter of the front wheel: 14 cm - Grass catcher: 50 litres - Weight incl. battery (EPTA): 17.5 kg - Product dimensions (L x W x H): 1435 - 1490 x 460 x 1005 - 1045 mm - Folded dimensions (LxWxH): 865 x 460 x 475 mm - Sound power level (LWA): 92 dB(A) - Sound pressure level (LpA): 81 dB(A) - K-value noise: 3 dB(A) - Vibration: ≦2.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHR 243 cordless hammer drill - 1x SDS-Plus drill chuck - 1x quick-action chuck - 1x Makita BL 1860 B 18 V 6.0 Ah rechargeable battery - without charger Product Description: The Makita DHR 243 cordless combi hammer is suitable for drilling, hammer drilling and chiselling. The brushless motor guarantees more power and endurance, a longer service life and a more compact machine housing. The combi hammer is equipped with a slip clutch and 40-position chisel adjustment. Makita is a leading manufacturer of power tools, characterised by high quality and a long tradition. Technical Data: - Manufacturer: Makita - Manufacturer designation: DHR 243 - Battery voltage: 18 V - Battery technology: Li-Ion - Gearbox: 1-speed - Tool holder: SDS-Plus - max. idle speed: 950 rpm - max. no-load impact rate: 4,700 blows/min - Max. drilling diameter in concrete: 24 mm - max. drill diameter in steel: 13 mm - max. drilling diameter in wood: 27 mm - Drill chuck clamping width: 13 mm - Impact force: 2 joules - Sound power level (LWA): 100 dB(A) - Sound pressure level (LpA): 89 dB(A) - K-value noise: 3 dB(A) - Vibration: 2.5 m/s² - Vibration hammer drilling in concrete:13 m/s² - Vibration chiselling with side handle:11 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHR 243 cordless hammer drill - 1x SDS-Plus drill chuck - 1x quick-action chuck - 1x Makita BL 1830 B 18 V 3.0 Ah battery ( 197599-5 ) - 1x Makita DC 18 RC charger ( 195584-2 ) Product Description: The Makita DHR 243 cordless combi hammer is suitable for drilling, hammer drilling and chiselling. The brushless motor guarantees more power and endurance, a longer service life and a more compact machine housing. The combi hammer is equipped with a slip clutch and 40-position chisel adjustment. Makita is a leading manufacturer of power tools, characterised by high quality and a long tradition. Technical Data: - Manufacturer: Makita - Manufacturer designation: DHR 243 - Battery voltage: 18 V - Battery technology: Li-Ion - Gearbox: 1-speed - Tool holder: SDS-Plus - max. idle speed: 950 rpm - max. no-load impact rate: 4,700 blows/min - Max. drilling diameter in concrete: 24 mm - max. drill diameter in steel: 13 mm - max. drilling diameter in wood: 27 mm - Drill chuck clamping width: 13 mm - Impact force: 2 joules - Sound power level (LWA): 100 dB(A) - Sound pressure level (LpA): 89 dB(A) - K-value noise: 3 dB(A) - Vibration: 2.5 m/s² - Vibration hammer drilling in concrete:13 m/s² - Vibration chiselling with side handle:11 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita 8352U6-6 Deep-drawing part for cordless reciprocating jigsaw DJV184 Product Description: The deep-drawn part is the perfect insert for the Makpac 3. The fit is optimised for the "DJV184" pendulum action jigsaw and allows convenient storage of the machine including accessories such as batteries and charger. Technical Data: - Manufacturer: Makita - Manufacturer's description: 8352U6-6 Deep-drawing part - Compatible: Makita DJV184 cordless pendulum action jigsaw - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita system insert for XGT battery starter set Product Description: Makita offers here a suitable insert for a battery starter set consisting of the DC 40 RA and up to 4 batteries from the 40 V range from Makita. The inserts naturally fit into the Makita Makpac system cases and provide a secure hold for the machines. Makita is a leading manufacturer of power tools, which is characterised above all by its high quality of workmanship and its large 18 V battery system. Technical Data: - Manufacturer: Makita - Manufacturer designation: Insert - Manufacturer number: 835G74-2 - Material: Plastic - Compatible with: DCR 40 RA / BL 4020 / BL 4025 / BL 4040 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DGA 511 cordless angle grinder - 1x Makita BL 1830 B 3.0 Ah battery - 1x Makita DC 18 RC quick charger - 1x additional handle 158237-4 - 1x Cutting disc A-80656 - 1x Protective cover 123145-8 - 1x Clamping flange 224415-9 - 1x flange nut 224554-5 - 1x Face spanner 782423-1 - 1x Makita Makpac 3 - 1x Universal insert Product Description: The new battery-powered angle grinder from Makita is state of the art in every respect: The brushless electric motor utilises the battery charge even more efficiently and works with absolutely minimal wear. The speed and torque are automatically adapted to the situation. The speed can also be adjusted manually from 3000 to 8500 rpm. An electronic current limiter protects the motor from overloading, a warning light illuminates and the current flow to the motor is reduced. The angle grinder is protected against dust and splash water and is fitted with non-slip rubber pads on the housing. The Active Feedback sensing Technology (AFT) switches the DGA 511 off if the disc stops suddenly to protect the user from an abrupt swing of the device. An LED display on the angle grinder shows the current battery charge level at all times. Technical Data: - Battery power: 18 V - Grinding disc (Ø): 125 mm - Idle speed: 3,000-8,500 min-1 - Spindle thread: M14 x 2 - Weight: 2.5 kg - Dimensions: (LxWxH) 368x140x151 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DGA 511 cordless angle grinder - 1x Makita BL 1860 B 6.0 Ah rechargeable battery - 1x Makita DC 18 RC quick charger - 1x additional handle 158237-4 - 1x Cutting disc A-80656 - 1x Protective cover 123145-8 - 1x Clamping flange 224415-9 - 1x flange nut 224554-5 - 1x Face spanner 782423-1 - 1x Makita Makpac 3 - 1x Universal insert Product Description: The new battery-powered angle grinder from Makita is state of the art in every respect: The brushless electric motor utilises the battery charge even more efficiently and works with absolutely minimal wear. The speed and torque are automatically adapted to the situation. The speed can also be adjusted manually from 3000 to 8500 rpm. An electronic current limiter protects the motor from overloading, a warning light illuminates and the current flow to the motor is reduced. The angle grinder is protected against dust and splash water and is fitted with non-slip rubber pads on the housing. The Active Feedback sensing Technology (AFT) switches the DGA 511 off if the disc stops suddenly to protect the user from an abrupt swing of the device. An LED display on the angle grinder shows the current battery charge level at all times. Technical Data: - Battery power: 18 V - Grinding disc (Ø): 125 mm - Idle speed: 3,000-8,500 min-1 - Spindle thread: M14 x 2 - Weight: 2.5 kg - Dimensions: (LxWxH) 368x140x151 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DGA 511 cordless angle grinder - 1x Makita BL 1830 B 3.0 Ah rechargeable battery - 1x additional handle 158237-4 - 1x cutting disc A-80656 - 1x protective cover 123145-8 - 1x Clamping flange 224415-9 - 1x flange nut 224554-5 - 1x Face spanner 782423-1 - 1x Makita Makpac 3 - 1x Universal insert - without charger Product Description: The new battery-powered angle grinder from Makita is state of the art in every respect: The brushless electric motor utilises the battery charge even more efficiently and works with absolutely minimal wear. The speed and torque are automatically adapted to the situation. The speed can also be adjusted manually from 3000 to 8500 rpm. An electronic current limiter protects the motor from overloading, a warning light illuminates and the current flow to the motor is reduced. The angle grinder is protected against dust and splash water and is fitted with non-slip rubber pads on the housing. The Active Feedback sensing Technology (AFT) switches the DGA 511 off if the disc stops suddenly to protect the user from an abrupt swing of the device. An LED display on the angle grinder shows the current battery charge level at all times. Technical Data: - Battery power: 18 V - Grinding disc (Ø): 125 mm - Idle speed: 3,000-8,500 min-1 - Spindle thread: M14 x 2 - Weight: 2.5 kg - Dimensions (LxWxH): 368x140x151 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita whirling blade 230 x 25 mm 8 teeth ( D-73324 ) Product Description: The Makita 8-tooth whirling blade with a diameter of 230 mm is specially designed for use with the UR101C cordless brushcutter. With its 25.4 mm bore, a thickness of 1.8 mm and 8 robust teeth, it is ideal for powerful cutting of dense grass, undergrowth and light bushes. The high-quality cutting blade ensures clean cuts and a long service life. Technical Data: - Manufacturer: Makita - Manufacturer number: D-73324 - Bore: 25.4 mm - Thickness: 1.8 mm - Diameter: 230 mm - Number of teeth: 8 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less