Makita

Scope of Delivery: - 1x Makita DHP 453 18 V Li-Ion cordless impact drill - 2x Makita BL 1840 B 18 V Li-Ion battery with 4.0 Ah - 1x Makita DC 18 RC charger - 1x Makita Makpac size 2 system case - 1x Makita Makpac universal insert Product Description: The Makita DHP 453 Solo cordless impact drill has an impact mechanism that can be switched off, right/left rotation and electronic speed control. The torque can be set in 16 stages plus drilling stage. The rubberised, ergonomic handle and compact design guarantee a secure grip and comfortable working. Technical Data: - Rated voltage: 18 volts - Idle speed 1st gear: 0 - 400 rpm - Idle speed 2nd gear: 0 - 1300 rpm - Idle speed 1st gear: 0 - 6,000 rpm - Idle speed 2nd gear: 0 - 19,000 min-1 - Drill chuck clamping width: 1.5 - 13 mm - Drill diameter wood: Ø 36 mm - Drill diameter steel: Ø 13 mm - Drill diameter masonry: Ø 13 mm - Torque max: 42 Nm - Torque min: 27 Nm - Total length: 214 mm - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 453 18 cordless impact drill - 1x Makita Makpac size 2 transport case - without battery and charger Product Description: The tool was developed for impact drilling in brick, concrete and stone as well as for impact-free drilling in wood, metal, ceramic and plastic. The cordless impact drill from the traditional Makita brand has an impact mechanism that can be switched off, an electronic switch for infinitely variable speed control and right/left rotation. In addition, the torque can be set in 16 stages plus a drilling stage. With the Makita cordless combination programme, you can also systematically expand your range with additional rechargeable batteries and machines from the Li-Ion 18V series and combine the products as required. Technical Data: - Voltage: 18 V - Max. Soft torque: 27 Nm - Max. Torque hard: 42 Nm - Drill chuck clamping width: 1.5-13 mm - Idle speed (1st gear): 0-400 min-1 - Idle speed (2nd gear): 0-1,300 min-1 - Idle speed (1st gear): 0-6,000 min-1 - Idle speed (2nd gear): 0-19,000 min-1 - Drilling capacity (steel): 13 mm - Drilling capacity (masonry): 13 mm - Drilling capacity (wood): 36 mm - Sound pressure level: 83 dB(A) - Sound power level: 94 dB(A) - Deviation (K): 3 dB (A) - Vibration load (percussion drilling concrete): 10.0 m/s2 - Deviation (K): 1.5 m/s2 - Vibration load (drilling metal): 2.5 m/s2 or less - Deviation (K): 1.5 m/s2 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHP 453 cordless impact drill - 1x BL 1850 B 5.0 Ah XR rechargeable battery - 1x Makita DC 18 RC charger - 1x Makita Makpac size 2 transport case - 1x Makita Makpac universal insert Product Description: The Makita DHP 453 RT1J set impresses with its excellent price/performance ratio as well as a compact, powerful machine and a long-lasting 5.0 Ah Makita battery. The DHP 453 18V cordless impact drill from the traditional Makita brand has an impact mechanism that can be switched off, an electronic switch for infinitely variable speed control and right/left-handed operation. In addition, the torque can be set in 16 stages plus a drilling stage. With the Makita cordless combination programme, you can also systematically expand your range with additional rechargeable batteries and machines from the Li-Ion 18V series and combine the products as required. The long-lasting BL 1850 B battery has an LED charge level indicator. Technical Data: - Idle speed 1st gear: 0 - 400 min-1 - Idle speed 2nd gear: 0 - 1,300 min-1 - Idle speed 1st gear: 0 - 6,000 min-1 - Idle speed 2nd gear: 0 - 19,000 min-1 - Drilling capacity in wood: 36 mm - Drilling capacity in steel: 13 mm - Drilling capacity in masonry: 13 mm - Torque soft: 27 Nm - Torque hard: 42 Nm - Drill chuck clamping width: 1.5 - 13 mm - Battery capacity: 5.0 Ah - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita JV 001 G cordless jigsaw - 1x chip breaker guard ( 415524-7 ) - 1x 4 mm hexagon spanner (783202-0) - 1x jigsaw blade B-10 wood/plastic (A-85628) - 1x jigsaw blade B-22 metal/plastic (A-85737) - 1x jigsaw blade BR-13 wood ( A-85793 ) - 1x Makita MAKPAC - 1x universal insert - without battery, without charger Product Description: The Makita JV 001 G cordless jigsaw is a powerful and versatile saw that is equipped with a three-stage pendulum action setting and a neutral position to enable precise adjustment to different materials and cutting requirements. The tool-free saw blade change ensures fast and uncomplicated operation, while the integrated dimming function of the LED lighting, which is activated by holding the standby switch, allows flexible adjustment of the brightness, especially when working overhead. A wider base plate provides additional stability when sawing, which increases precision and control. The jigsaw's improved gearbox design allows for a very short design, making it easier to handle in tight or hard-to-reach areas. Thanks to the variable speed setting, the JV 001 G is suitable for a wide range of applications, and the bright double LED with pre-glow and afterglow function ensures that the work area is always optimally illuminated. Equipped with XPT (Extreme Protection Technology), this jigsaw offers optimum protection against dust and splash water, even under tough conditions. The brushless motor is not only maintenance-free, but also particularly durable, which significantly extends the service life of the saw. Deep discharge protection switches the device off automatically when the battery is almost empty to prevent damage and maximise battery life. Technical Data: - Manufacturer: Makita - Manufacturer's designation: JV 001 G - Vibration values, sawing metal: 4.8 m/s² - Vibration values, cutting boards: 4.6 m/s² - Vibration uncertainty factor (K-value), cutting boards: 2.5 m/s² - Vibration uncertainty factor (K value), sawing metal: 1.5 m/s² - Battery voltage: 40 V - Max. Power output: 700 W - (Idle) stroke rate: 800 - 3500 min-¹ - Stroke height: 26 mm - Max. Tilt left / right: 45 º - Max. Cutting capacity aluminium: 20 mm - Max. Cutting capacity wood 90°: 135 mm - Cutting capacity steel: 10 mm - Pendulum stroke: Yes - Sound power level (LWA): 98 dB(A) - Sound pressure level (LpA): 90 dB(A) - K-value noise: 3 dB(A) - Product weight: 1.9 kg - Weight incl. battery: 2.6 - 2.9 kg - Product dimensions (L x W x H): 298 x 84 x 189 mm - Brushless motor: Yes - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DTD 173 cordless impact wrench - 2x Makita BL 1830 B rechargeable battery 18 V 3.0 Ah - 1x Makita DC 18 RC charger - 1x Makita Makpac case - 1x universal insert Product Description: The DTD173 cordless impact wrench from Makita impresses with its compact design, low weight and an impressive tightening torque of 180 Nm. This versatile tool is equipped with four specially developed screwdriving modes to meet the different requirements of everyday work. These are the wood mode, the mode for machine screws and two additional T-modes. Wood mode starts at a low speed and increases this automatically as soon as the screw is gripped until the maximum speed is reached. The screw mode automatically stops the tool in anti-clockwise rotation mode as soon as screws or nuts have been sufficiently loosened. T1 mode is ideal for fast tightening: The screw is screwed in at high speed and the impact mode starts shortly afterwards. In T2 mode, tear-out of the thread is prevented by the tool reducing the speed after the start of impact operation. A continuous light ring on the 1/4" tool holder ensures better visibility in the working area. A new bit holder with reduced resistance also makes installation easier and ensures that the bits are held more securely. With these well thought-out features, the Makita DTD173 is the perfect companion for precise and efficient work. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DTD173 - Battery voltage: 18 V - Brushless motor: Yes - Idle speed: 0 - 1100 / 2100 / 3200 / 3600 min-¹ - Torque max.: 20 / 50 / 170 / 180 Nm - (Idle) impact speed: 0 - 1100 / 2600 / 3600 / 3800 min-¹ - Standard screws: M5 - M16 - Machine screws: M4 - M8 - High-strength screws: M5 - M14 - Mounting: 1/4 " - Sound power level (LWA): 108 dB(A) - Sound pressure level (LpA): 97 dB(A) - K-value noise: 3 dB(A) - Vibration values, tightening under maximum load: 12.9 m/s² - Vibration uncertainty factor (K value), tightening under maximum load: 1.5 m/s² - Product dimensions (L x W x H): 111 x 81 x 234 mm - Weight incl. battery: 1.2 - 1.5 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita BHR 241 cordless combi hammer drill solo - without battery and charger Product Description: The tool is designed for percussion drilling and drilling in brick, concrete and stone as well as for chiselling work. It is also suitable for normal drilling in wood, metal, ceramics and plastic. The powerful Makita BHR 241 18 V hammer drill is suitable for drilling, hammer drilling and chiselling. The combi hammer also impresses with its slip clutch, motor brake and 40-position chisel adjustment for safe and optimum work in any situation. The tool has externally replaceable carbon brushes and thanks to a new rubber damping design, less vibration is generated. With the SDS-Plus holder, the attachments on the BHR 241 can be picked up quickly, without tools and protected from dust. Technical Data: - Voltage: 18 V - Tool holder: SDS plus - Impact energy: 1.90 joules - Idle speed: 1,200 1/min - Max. Max. impact speed: 4,000 1/min - Drill diameter (steel): 13 mm - Drill diameter (concrete): 20 mm - Drill diameter (wood): 26 mm - Total length: 417 mm - Net weight: 3.5 kg - Sound pressure level: 86 dB(A) - Sound power level: 97 dB(A) - Deviation (K): 3 dB(A) - Vibration load (drilling in metal): 2.5 m/s2 or less - Vibration load (chiselling): 9.5 m/s2 - Vibration load (percussion drilling concrete): 12.5 m/s2 - Deviation (K): 1.5 m/s2 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHR 241 cordless hammer drill - 1x side handle - 1x depth stop - 2x Makita BL 1860 B 18 V 6.0 Ah battery - 1x Makita DC 18 RC charger Product Description: The tool is designed for percussion drilling and drilling in brick, concrete and stone as well as for chiselling work. It is also suitable for normal drilling in wood, metal, ceramics and plastic. The powerful hammer drill is suitable for drilling, hammer drilling and chiselling. The combi hammer also impresses with its slip clutch, motor brake and 40-position chisel adjustment for safe and optimal work in any situation. The tool has externally replaceable carbon brushes and thanks to a new rubber damping design, less vibration is generated. With the SDS-Plus holder, the attachments on the DHR 241 can be picked up quickly, without tools and protected from dust. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DHR 241 - Battery voltage: 18 V - Impact force: 2.0 Joule - Tool holder: SDS-Plus - Max. Idle speed: 0-1100 rpm - Max. No-load impact rate: 0-4000 blows/min - Max. Drill diameter (steel): 13 mm - Max. Drill diameter (concrete): 20 mm - Max. Drill diameter (wood): 26 mm - Sound power level (dB): 97 dB(A) - Sound pressure level (dB): 86 dB(A) - K-value noise: 3 dB(A) - Vibration drilling: 2.5 m/s² - Vibration hammer drilling in concrete: 12.5 m/s² - Vibration chiselling with side handle: 9.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHR 241 cordless hammer drill - 1x side handle - 1x depth stop - 1x Makita BL 1860 B 18 V 6.0 Ah battery - 1x Makita DC 18 RC charger Product Description: The tool is designed for percussion drilling and drilling in brick, concrete and stone as well as for chiselling work. It is also suitable for normal drilling in wood, metal, ceramics and plastic. The powerful hammer drill is suitable for drilling, hammer drilling and chiselling. The combi hammer also impresses with its slip clutch, motor brake and 40-position chisel adjustment for safe and optimal work in any situation. The tool has externally replaceable carbon brushes and thanks to a new rubber damping design, less vibration is generated. With the SDS-Plus holder, the attachments on the DHR 241 can be picked up quickly, without tools and protected from dust. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DHR 241 - Battery voltage: 18 V - Impact force: 2.0 Joule - Tool holder: SDS-Plus - Max. Idle speed: 0-1100 rpm - Max. No-load impact rate: 0-4000 blows/min - Max. Drill diameter (steel): 13 mm - Max. Drill diameter (concrete): 20 mm - Max. Drill diameter (wood): 26 mm - Sound power level (dB): 97 dB(A) - Sound pressure level (dB): 86 dB(A) - K-value noise: 3 dB(A) - Vibration drilling: 2.5 m/s² - Vibration hammer drilling in concrete: 12.5 m/s² - Vibration chiselling with side handle: 9.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHR 241 cordless hammer drill - 1x side handle - 1x depth stop - 1x Makita BL 1830 B 18 V 3.0 Ah battery - without charger Product Description: The Makita DHR 241 18 V hammer drill is suitable for drilling, hammer drilling and chiselling. The combi hammer impresses with its slip clutch, motor brake for safe working and 40-position chisel adjustment for optimum working in any situation. The tool has externally replaceable carbon brushes and thanks to a new rubber damping design, less vibration is generated. With the SDS-Plus holder, the attachments can be picked up quickly, without tools and protected from dust. Technical Data: - Battery voltage: 18 V - Impact force: 2.0 Joule - Tool holder: SDS-Plus - Max. Idle speed: 0-1100 rpm - Max. No-load impact rate: 0-4000 blows/min - Max. Drill diameter (steel): 13 mm - Max. Drill diameter (concrete): 20 mm - Max. Drill diameter (wood): 26 mm - Sound power level (dB): 97 dB(A) - Sound pressure level (dB): 86 dB(A) - K-value noise: 3 dB(A) - Vibration drilling: 2.5 m/s² - Vibration hammer drilling in concrete: 12.5 m/s² - Vibration chiselling with side handle: 9.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DTD 173 cordless impact wrench - 1x Makita BL 1860 B rechargeable battery 18 V 6.0 Ah - 1x Makita Makpac case - 1x universal insert - without charger Product Description: The DTD173 cordless impact wrench from Makita impresses with its compact design, low weight and an impressive tightening torque of 180 Nm. This versatile tool is equipped with four specially developed screwdriving modes to meet the different requirements of everyday work. These are the wood mode, the mode for machine screws and two additional T-modes. Wood mode starts at a low speed and increases this automatically as soon as the screw is gripped until the maximum speed is reached. The screw mode automatically stops the tool in anti-clockwise rotation mode as soon as screws or nuts have been sufficiently loosened. T1 mode is ideal for fast tightening: The screw is screwed in at high speed and the impact mode starts shortly afterwards. In T2 mode, tear-out of the thread is prevented by the tool reducing the speed after the start of impact operation. A continuous light ring on the 1/4" tool holder ensures better visibility in the working area. A new bit holder with reduced resistance also makes installation easier and ensures that the bits are held more securely. With these well thought-out features, the Makita DTD173 is the perfect companion for precise and efficient work. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DTD173 - Battery voltage: 18 V - Brushless motor: Yes - Idle speed: 0 - 1100 / 2100 / 3200 / 3600 min-¹ - Torque max.: 20 / 50 / 170 / 180 Nm - (Idle) impact speed: 0 - 1100 / 2600 / 3600 / 3800 min-¹ - Standard screws: M5 - M16 - Machine screws: M4 - M8 - High-strength screws: M5 - M14 - Mounting: 1/4 " - Sound power level (LWA): 108 dB(A) - Sound pressure level (LpA): 97 dB(A) - K-value noise: 3 dB(A) - Vibration values, tightening under maximum load: 12.9 m/s² - Vibration uncertainty factor (K value), tightening under maximum load: 1.5 m/s² - Product dimensions (L x W x H): 111 x 81 x 234 mm - Weight incl. battery: 1.2 - 1.5 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DTD 173 cordless impact wrench - 2x Makita BL 1850 B rechargeable battery 18 V 5.0 Ah - 1x Makita DC 18 RC charger Product Description: The DTD173 cordless impact wrench from Makita impresses with its compact design, low weight and an impressive tightening torque of 180 Nm. This versatile tool is equipped with four specially developed screwdriving modes to meet the different requirements of everyday work. These are the wood mode, the mode for machine screws and two additional T-modes. Wood mode starts at a low speed and increases this automatically as soon as the screw is gripped until the maximum speed is reached. The screw mode automatically stops the tool in anti-clockwise rotation mode as soon as screws or nuts have been sufficiently loosened. T1 mode is ideal for fast tightening: The screw is screwed in at high speed and the impact mode starts shortly afterwards. In T2 mode, tear-out of the thread is prevented by the tool reducing the speed after the start of impact operation. A continuous light ring on the 1/4" tool holder ensures better visibility in the working area. A new bit holder with reduced resistance also makes installation easier and ensures that the bits are held more securely. With these well thought-out features, the Makita DTD173 is the perfect companion for precise and efficient work. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DTD173 - Battery voltage: 18 V - Brushless motor: Yes - Idle speed: 0 - 1100 / 2100 / 3200 / 3600 min-¹ - Torque max.: 20 / 50 / 170 / 180 Nm - (Idle) impact speed: 0 - 1100 / 2600 / 3600 / 3800 min-¹ - Standard screws: M5 - M16 - Machine screws: M4 - M8 - High-strength screws: M5 - M14 - Mounting: 1/4 " - Sound power level (LWA): 108 dB(A) - Sound pressure level (LpA): 97 dB(A) - K-value noise: 3 dB(A) - Vibration values, tightening under maximum load: 12.9 m/s² - Vibration uncertainty factor (K value), tightening under maximum load: 1.5 m/s² - Product dimensions (L x W x H): 111 x 81 x 234 mm - Weight incl. battery: 1.2 - 1.5 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DTD 173 cordless impact wrench - 1x Makita BL 1840 B rechargeable battery 18 V 4.0 Ah - without charger Product Description: The DTD173 cordless impact wrench from Makita impresses with its compact design, low weight and an impressive tightening torque of 180 Nm. This versatile tool is equipped with four specially developed screwdriving modes to meet the different requirements of everyday work. These are the wood mode, the mode for machine screws and two additional T-modes. Wood mode starts at a low speed and increases this automatically as soon as the screw is gripped until the maximum speed is reached. The screw mode automatically stops the tool in anti-clockwise rotation mode as soon as screws or nuts have been sufficiently loosened. T1 mode is ideal for fast tightening: The screw is screwed in at high speed and the impact mode starts shortly afterwards. In T2 mode, tear-out of the thread is prevented by the tool reducing the speed after the start of impact operation. A continuous light ring on the 1/4" tool holder ensures better visibility in the working area. A new bit holder with reduced resistance also makes installation easier and ensures that the bits are held more securely. With these well thought-out features, the Makita DTD173 is the perfect companion for precise and efficient work. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DTD173 - Battery voltage: 18 V - Brushless motor: Yes - Idle speed: 0 - 1100 / 2100 / 3200 / 3600 min-¹ - Torque max.: 20 / 50 / 170 / 180 Nm - (Idle) impact speed: 0 - 1100 / 2600 / 3600 / 3800 min-¹ - Standard screws: M5 - M16 - Machine screws: M4 - M8 - High-strength screws: M5 - M14 - Mounting: 1/4 " - Sound power level (LWA): 108 dB(A) - Sound pressure level (LpA): 97 dB(A) - K-value noise: 3 dB(A) - Vibration values, tightening under maximum load: 12.9 m/s² - Vibration uncertainty factor (K value), tightening under maximum load: 1.5 m/s² - Product dimensions (L x W x H): 111 x 81 x 234 mm - Weight incl. battery: 1.2 - 1.5 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DTD 173 cordless impact wrench - 2x Makita BL 1830 B rechargeable battery 18 V 3.0 Ah - 1x Makita DC 18 RC charger Product Description: The DTD173 cordless impact wrench from Makita impresses with its compact design, low weight and an impressive tightening torque of 180 Nm. This versatile tool is equipped with four specially developed screwdriving modes to meet the different requirements of everyday work. These are the wood mode, the mode for machine screws and two additional T-modes. Wood mode starts at a low speed and increases this automatically as soon as the screw is gripped until the maximum speed is reached. The screw mode automatically stops the tool in anti-clockwise rotation mode as soon as screws or nuts have been sufficiently loosened. T1 mode is ideal for fast tightening: The screw is screwed in at high speed and the impact mode starts shortly afterwards. In T2 mode, tear-out of the thread is prevented by the tool reducing the speed after the start of impact operation. A continuous light ring on the 1/4" tool holder ensures better visibility in the working area. A new bit holder with reduced resistance also makes installation easier and ensures that the bits are held more securely. With these well thought-out features, the Makita DTD173 is the perfect companion for precise and efficient work. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DTD173 - Battery voltage: 18 V - Brushless motor: Yes - Idle speed: 0 - 1100 / 2100 / 3200 / 3600 min-¹ - Torque max.: 20 / 50 / 170 / 180 Nm - (Idle) impact speed: 0 - 1100 / 2600 / 3600 / 3800 min-¹ - Standard screws: M5 - M16 - Machine screws: M4 - M8 - High-strength screws: M5 - M14 - Mounting: 1/4 " - Sound power level (LWA): 108 dB(A) - Sound pressure level (LpA): 97 dB(A) - K-value noise: 3 dB(A) - Vibration values, tightening under maximum load: 12.9 m/s² - Vibration uncertainty factor (K value), tightening under maximum load: 1.5 m/s² - Product dimensions (L x W x H): 111 x 81 x 234 mm - Weight incl. battery: 1.2 - 1.5 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DBO 480 cordless orbital sander - 1x dust box - 1x Makita BL 1840 B 18 V 4.0 Ah battery ( 197265-4 ) - 1x Makita DC 18 RC battery fast charger 7.2 V - 18 V ( 195584-2 ) Product Description: The Makita DBO 480 Z cordless orbital sander is a powerful orbital sander with efficient dust extraction. The device is characterised by its excellent handling and hand-friendly design. In addition, the oscillation range is 1.5 mm and the oscillation speed can be adjusted in two stages. The dust box included in the scope of delivery is the ideal companion for low-dust work. An external vacuum cleaner can also be connected. This significantly maximises extraction and minimises dust pollution in the room. The sandpaper is attached using Velcro or a clamping lever. Makita is a leading manufacturer of power tools, characterised by a long tradition and high quality standards. Technical Data: - Manufacturer: Makita - Manufacturer designation: DBO 480 - Battery voltage: 18 V - LXT battery system: Yes - Oscillating circuit: 1.5 mm - Weight incl. battery (EPTA): 1.4 - 1.7 kg - Product dimensions (L x W x H): 171 x 112 x 152 mm - Battery type (Ni-Cd / Li-Ion): Li-ion: - System: LXT 18V/36V - Vibrations per minute: 11 000 / 14 000 min-¹ - Sanding plate size: 112 x 102 mm - Paper size: 114 x 140 mm - Suction hose connection Ø inside/outside: 17/22 mm - Sound pressure level (LpA): 75 dB(A) - K-value noise: 3 dB(A) - Vibration: ≤ 2.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DTD 173 cordless impact wrench - 1x Makita BL 1840 B rechargeable battery 18 V 4.0 Ah - 1x Makita Makpac case - 1x universal insert - without charger Product Description: The DTD173 cordless impact wrench from Makita impresses with its compact design, low weight and an impressive tightening torque of 180 Nm. This versatile tool is equipped with four specially developed screwdriving modes to meet the different requirements of everyday work. These are the wood mode, the mode for machine screws and two additional T-modes. Wood mode starts at a low speed and increases this automatically as soon as the screw is gripped until the maximum speed is reached. The screw mode automatically stops the tool in anti-clockwise rotation mode as soon as screws or nuts have been sufficiently loosened. T1 mode is ideal for fast tightening: The screw is screwed in at high speed and the impact mode starts shortly afterwards. In T2 mode, tear-out of the thread is prevented by the tool reducing the speed after the start of impact operation. A continuous light ring on the 1/4" tool holder ensures better visibility in the working area. A new bit holder with reduced resistance also makes installation easier and ensures that the bits are held more securely. With these well thought-out features, the Makita DTD173 is the perfect companion for precise and efficient work. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DTD173 - Battery voltage: 18 V - Brushless motor: Yes - Idle speed: 0 - 1100 / 2100 / 3200 / 3600 min-¹ - Torque max.: 20 / 50 / 170 / 180 Nm - (Idle) impact speed: 0 - 1100 / 2600 / 3600 / 3800 min-¹ - Standard screws: M5 - M16 - Machine screws: M4 - M8 - High-strength screws: M5 - M14 - Mounting: 1/4 " - Sound power level (LWA): 108 dB(A) - Sound pressure level (LpA): 97 dB(A) - K-value noise: 3 dB(A) - Vibration values, tightening under maximum load: 12.9 m/s² - Vibration uncertainty factor (K value), tightening under maximum load: 1.5 m/s² - Product dimensions (L x W x H): 111 x 81 x 234 mm - Weight incl. battery: 1.2 - 1.5 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DBO 480 cordless orbital sander - 1x dust box - 1x Makita BL 1840 B 18 V 4.0 Ah battery ( 197265-4 ) - 1x Makita DC 18 RC battery fast charger 7.2 V - 18 V ( 195584-2 ) - 1x Makpac - 1x universal insert Product Description: The Makita DBO 480 Z cordless orbital sander is a powerful orbital sander with efficient dust extraction. The device is characterised by its excellent handling and hand-friendly design. In addition, the oscillation range is 1.5 mm and the oscillation speed can be adjusted in two stages. The dust box included in the scope of delivery is the ideal companion for low-dust work. An external vacuum cleaner can also be connected. This significantly maximises extraction and minimises dust pollution in the room. The sandpaper is attached using Velcro or a clamping lever. Makita is a leading manufacturer of power tools, characterised by a long tradition and high quality standards. Technical Data: - Manufacturer: Makita - Manufacturer designation: DBO 480 - Battery voltage: 18 V - LXT battery system: Yes - Oscillating circuit: 1.5 mm - Weight incl. battery (EPTA): 1.4 - 1.7 kg - Product dimensions (L x W x H): 171 x 112 x 152 mm - Battery type (Ni-Cd / Li-Ion): Li-ion: - System: LXT 18V/36V - Vibrations per minute: 11 000 / 14 000 min-¹ - Sanding plate size: 112 x 102 mm - Paper size: 114 x 140 mm - Suction hose connection Ø inside/outside: 17/22 mm - Sound pressure level (LpA): 75 dB(A) - K-value noise: 3 dB(A) - Vibration: ≤ 2.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHR 241 cordless hammer drill - 1x side handle - 1x depth stop - 1x Makita BL 1860 B 18 V 6.0 Ah battery - without charger Product Description: The tool is designed for percussion drilling and drilling in brick, concrete and stone as well as for chiselling work. It is also suitable for normal drilling in wood, metal, ceramics and plastic. The powerful hammer drill is suitable for drilling, hammer drilling and chiselling. The combi hammer also impresses with its slip clutch, motor brake and 40-position chisel adjustment for safe and optimal work in any situation. The tool has externally replaceable carbon brushes and thanks to a new rubber damping design, less vibration is generated. With the SDS-Plus holder, the attachments on the DHR 241 can be picked up quickly, without tools and protected from dust. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DHR 241 - Battery voltage: 18 V - Impact force: 2.0 Joule - Tool holder: SDS-Plus - Max. Idle speed: 0-1100 rpm - Max. No-load impact rate: 0-4000 blows/min - Max. Drill diameter (steel): 13 mm - Max. Drill diameter (concrete): 20 mm - Max. Drill diameter (wood): 26 mm - Sound power level (dB): 97 dB(A) - Sound pressure level (dB): 86 dB(A) - K-value noise: 3 dB(A) - Vibration drilling: 2.5 m/s² - Vibration hammer drilling in concrete: 12.5 m/s² - Vibration chiselling with side handle: 9.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHR 241 cordless hammer drill - 1x side handle - 1x depth stop - 2x Makita BL 1840 B 18 V 4.0 Ah rechargeable battery - 1x Makita DC 18 RC quick charger - 1x Makita Makpac - 1x universal insert Product Description: The Makita DHR 241 18 V hammer drill is suitable for drilling, hammer drilling and chiselling. The combi hammer impresses with its slip clutch and its 40-position chisel adjustment ensures optimum working in every situation. The tool has externally replaceable carbon brushes and thanks to a new rubber damping design, less vibration is generated. The rotary hammer is also equipped with a motor brake to ensure safe working. With the SDS-Plus holder, the attachments can be picked up quickly, without tools and protected from dust. Technical Data: - Battery voltage: 18 V - Impact force: 2.0 joules - Tool holder: SDS-Plus - Max. Idle speed: 0-1100 rpm - Max. No-load impact rate: 0-4000 blows/min - Max. Drill diameter (steel): 13 mm - Max. Drill diameter (concrete): 20 mm - Max. Drill diameter (wood): 26 mm - Sound power level (dB): 97 dB(A) - Sound pressure level (dB): 86 dB(A) - K-value noise: 3 dB(A) - Vibration drilling: 2.5 m/s² - Vibration hammer drilling in concrete: 12.5 m/s² - Vibration chiselling with side handle: 9.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHR 241 cordless hammer drill - 1x side handle - 1x depth stop - 5x Makita Nemesis drill bits ( 5 x 115 / 6 x 115 / 6 x 165 / 8 x 165 / 10 x 165 mm ) - without battery, without charger Product Description: The tool is designed for percussion drilling and drilling in brick, concrete and stone as well as for chiselling work. It is also suitable for normal drilling in wood, metal, ceramic and plastic. The powerful rotary hammer is suitable for drilling, hammer drilling and chiselling. The combi hammer also impresses with its slip clutch, motor brake and 40-position chisel adjustment for safe and optimal work in any situation. The tool has externally replaceable carbon brushes and thanks to a new rubber damping design, less vibration is generated. With the SDS-Plus holder, the attachments on the DHR 241 can be picked up quickly, without tools and protected from dust. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DHR 241 - Battery voltage: 18 V - Impact force: 2.0 Joule - Tool holder: SDS-Plus - Max. Idle speed: 0-1100 rpm - Max. No-load impact rate: 0-4000 blows/min - Max. Drill diameter (steel): 13 mm - Max. Drill diameter (concrete): 20 mm - Max. Drill diameter (wood): 26 mm - Sound power level (dB): 97 dB(A) - Sound pressure level (dB): 86 dB(A) - K-value noise: 3 dB(A) - Vibration drilling: 2.5 m/s² - Vibration hammer drilling in concrete: 12.5 m/s² - Vibration chiselling with side handle: 9.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHR 241 cordless hammer drill - 1x side handle - 1x depth stop - 1x Makita BL 1860 B 18 V 6.0 Ah battery - 1x Makita Makpac - 1x universal insert - without charger Product Description: The tool is designed for percussion drilling and drilling in brick, concrete and stone as well as for chiselling work. It is also suitable for normal drilling in wood, metal, ceramics and plastic. The powerful hammer drill is suitable for drilling, hammer drilling and chiselling. The combi hammer also impresses with its slip clutch, motor brake and 40-position chisel adjustment for safe and optimal work in any situation. The tool has externally replaceable carbon brushes and thanks to a new rubber damping design, less vibration is generated. With the SDS-Plus holder, the attachments on the DHR 241 can be picked up quickly, without tools and protected from dust. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DHR 241 - Battery voltage: 18 V - Impact force: 2.0 Joule - Tool holder: SDS-Plus - Max. Idle speed: 0-1100 rpm - Max. No-load impact rate: 0-4000 blows/min - Max. Drill diameter (steel): 13 mm - Max. Drill diameter (concrete): 20 mm - Max. Drill diameter (wood): 26 mm - Sound power level (dB): 97 dB(A) - Sound pressure level (dB): 86 dB(A) - K-value noise: 3 dB(A) - Vibration drilling: 2.5 m/s² - Vibration hammer drilling in concrete: 12.5 m/s² - Vibration chiselling with side handle: 9.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DHR 241 cordless hammer drill - 1x side handle - 1x depth stop - 1x Makita BL 1840 B 18 V 4.0 Ah battery - without charger Product Description: The Makita DHR 241 18 V hammer drill is suitable for drilling, hammer drilling and chiselling. The combi hammer impresses with its slip clutch, motor brake for safe working and 40-position chisel adjustment for optimum working in any situation. The tool has externally replaceable carbon brushes and thanks to a new rubber damping design, less vibration is generated. With the SDS-Plus holder, the attachments can be picked up quickly, without tools and protected from dust. Technical Data: - Battery voltage: 18 V - Impact force: 2.0 Joule - Tool holder: SDS-Plus - Max. Idle speed: 0-1100 rpm - Max. No-load impact rate: 0-4000 blows/min - Max. Drill diameter (steel): 13 mm - Max. Drill diameter (concrete): 20 mm - Max. Drill diameter (wood): 26 mm - Sound power level (dB): 97 dB(A) - Sound pressure level (dB): 86 dB(A) - K-value noise: 3 dB(A) - Vibration drilling: 2.5 m/s² - Vibration hammer drilling in concrete: 12.5 m/s² - Vibration chiselling with side handle: 9.5 m/s² - K-value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makpac size 4 ( 821552-6 ) - 1x Specialised saw blade 190x30x24T (B-64191) - 1x rip fence ( 164095-8 ) - 1x dust extraction nozzle ( 196520-1 ) - 1x 6-KT pin spanner 6mm ( 783204-6 ) - 1x DC 18 RD charger 7.2V - 18V for 2 Li-Ion batteries ( 196933-6 ) - 2x BL 1860 B battery with 18V 6.0 Ah and LED charge level indicator ( 197422-4 ) Product Description: This practical hand-held circular saw from Makita has built-in ADT (Automatic Torque Drive Technology). During operation, the speed is automatically regulated to achieve optimum performance depending on requirements. Thanks to the indicator light coupled with ADT, you are warned in good time before the machine is overloaded as soon as it starts flashing. The DHS 782 also has a new base plate made of lightweight magnesium, which can be coupled directly to a guide rail. With this device, you always have an optimised view thanks to the change of position of the front handle. There is also an electric motor brake. The brushless motor ensures greater endurance, a longer service life and a more compact design. The tilt is adjustable up to 48 degrees. The XPT - Xtreme Protect Technology offers optimum protection against dust and splash water, even under tough conditions. The bright double LED ensures a good view of the scribing line. Technical Data: - DHS 782 ZJ: - Manufacturer number: DHS782ZJ - Idle speed: 6,000 min-1 - Cutting capacity 0°: 62.5 mm - Cutting capacity 45°: 46 mm - Cutting capacity 48°: 43.5 mm - Saw blade Ø / bore: 190/30 mm - Battery voltage: 2x18 V - Dimensions (LxWxH) mm: 348 x 210 x 290 - Weight: 3950 g - Sound pressure level (LpA): 93 dB(A) - Sound power level (LWA): 104 dB(A) - K-value noise: 3 dB(A) - Vibration sawing wood: 2.5 m/s² - Vibration sawing metal: 2.5 m/s² - K-value vibration: 1.5 m/s² - BL 1860 B 18V 6.0 Ah battery: - Manufacturer number: 197422-4 - Battery capacity: 6.0 Ah - Battery voltage: 18 V - Battery weight: 670 g - DC 18 RD double charger: - Manufacturer number: 196933-6 - Battery charging times Li-Ion 18 V - charging time for 2 batteries - 5.0 Ah BL1850: 45 min. - 4.0 Ah BL1840: 36 min. - 3.0 Ah BL1830: 22 min. - 1.5 Ah BL1815: 15 min. - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makpac size 4 ( 821552-6 ) - 1x Specialised saw blade 190x30x24T (B-64191) - 1x rip fence ( 164095-8 ) - 1x dust extraction nozzle ( 196520-1 ) - 1x 6-KT pin spanner 6mm ( 783204-6 ) - 1x DC 18 RD charger 7.2V - 18V for 2 Li-Ion batteries ( 196933-6 ) - 2x BL 1830 B battery with 18V 3.0 Ah and LED charge level indicator ( 197599-5 ) Product Description: This practical hand-held circular saw from Makita has built-in ADT (Automatic Torque Drive Technology). During operation, the speed is automatically regulated to achieve optimum performance depending on requirements. Thanks to the indicator light coupled with ADT, you are warned in good time before the machine is overloaded as soon as it starts flashing. The DHS 782 also has a new base plate made of lightweight magnesium, which can be coupled directly to a guide rail. With this device, you always have an optimised view thanks to the change of position of the front handle. There is also an electric motor brake. The brushless motor ensures greater endurance, a longer service life and a more compact design. The tilt is adjustable up to 48 degrees. The XPT - Xtreme Protect Technology offers optimum protection against dust and splash water, even under tough conditions. The bright double LED ensures a good view of the scribing line. Technical Data: - DHS 782 ZJ: - Manufacturer number: DHS782ZJ - Idle speed: 6,000 min-1 - Cutting capacity 0°: 62.5 mm - Cutting capacity 45°: 46 mm - Cutting capacity 48°: 43.5 mm - Saw blade Ø / bore: 190/30 mm - Battery voltage: 2x18 V - Dimensions (LxWxH) mm: 348 x 210 x 290 - Weight: 3950g - Sound pressure level (LpA): 93 dB(A) - Sound power level (LWA): 104 dB(A) - K-value noise: 3 dB(A) - Vibration sawing wood: 2.5 m/s² - Vibration sawing metal: 2.5 m/s² - K-value vibration: 1.5 m/s² - BL 1830 B 18V 3.0 Ah battery: - Manufacturer number: 197599-5 - Battery capacity: 3.0 Ah - Battery voltage: 18 V - Battery weight: 610 g - DC 18 RD double charger: - Manufacturer number: 196933-6 - Battery charging times Li-Ion 18 V - charging time for 2 batteries - 5.0 Ah BL1850: 45 min. - 4.0 Ah BL1840: 36 min. - 3.0 Ah BL1830: 22 min. - 1.5 Ah BL1815: 15 min. - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Makita DUC 302 cordless chainsaw - 2x Makita BL 1850 B 5.0 Ah rechargeable batteries ( 632B77-5 ) - 1x saw bar: 30 cm 1.1 mm 3/8" ( 442030611 ) - 1x saw chain: 30 cm / 1.1 mm 3/8" ( 90PX046XMA ) - 1x saw chain guard: 35 x 10 cm ( 419288-5 ) - without charger Product Description: The tool is designed for cutting branches / pruning trees. It is also suitable for tree care. The cordless chainsaw is a powerful 36 V tool that is also very environmentally friendly and cost-saving. The DUC 302 is equipped with 2x18 V Li-Ion batteries, the design and performance of this tool are extremely remarkable. The chainsaw is perfect for use in noise-sensitive areas such as retirement homes, hospitals or even holiday resorts. To ensure that performance and safety are not neglected, the chainsaw has a high chain speed of 8.3 m/s for fast cuts, an electric motor brake and kickback protection. The chain on the Makita DUC 302 is also lubricated automatically, the chain can be changed without tools and the chain tension is tensioned smoothly. The built-in soft grip and the charge level indicator ensure greater comfort when working. Top-handle chainsaw - only authorised for professional users with special training! Technical Data: - Battery voltage: 2x18 V - Cutting length (standard bar): 280 mm - Bar length (standard bar): 300 mm - Chain pitch: 9.5 mm (3/8") - Drive link thickness: 1.1 mm - Driving links: 46 - Chain speed: 8.3 m/s - Oil tank: 85 ml - Weight without battery: 4.7 kg - Sound pressure level: 84.4 dB(A) - Sound power level: 95.4 dB(A) - Uncertainty (K): 2.5 dB(A) - Vibration emission (cutting wood): 6.3 m/s2 - Uncertainty (K): 1.5 m/s2 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less