Material Processing
-
LESSMANN LESSMANN brush Ø 12 mm shaft 6 mm wire thickness 0.3 mm ( 4000844888 )
Sat, 09/06/2025
Scope of Delivery: - Brush Ø 12 mm shaft 6 mm wire thickness 0.3 mm Product Description: crimped wire - universal and flexible for removing rust, paint, impurities, for light deburring work - stainless steel brushes are also suitable for removing temper colours in stainless steel weld seams - shaft Ø 6 mm Technical Data: - nanFor commercial use, please observe the building regulations!
€14,58
-
OSBORN OSBORN brush assortment holder 6 mm wire thickness 0.3 mm ( 4000841238 )
Sat, 09/06/2025
Scope of Delivery: - Brush assortment holder 6 mm wire thickness 0.3 mm Product Description: crimped wire - consisting of five different drill brushes for metalworking - SB-packed - shaft Ø 6 mm - contents: round brush 50 and 75 mm Ø brush 25 mm Ø cup brush 50 and 75 mm Ø Technical Data: - Material: steel - max. speed: 4500min-¹For commercial use, please observe the building regulations!
€13,99
-
PFERD PFERD abrasive sleeve carrier D30xH30mm ( 8000433967 )
Sat, 09/06/2025
Scope of Delivery: - Abrasive sleeve carrier D30xH30mm Product Description: made of rubber - cylindrical shape - the slots facilitate the expansion of the body during sanding, which tensions the abrasive sleeve and increases its elasticity - the belt is non-slip - the abrasive sleeves can be fitted and removed with a slight clockwise rotation Item no. 8000 433 967: Hard version Technical Data: - nanFor commercial use, please observe the building regulations!
€21,83
-
KLINGSPOR KLINGSPOR flap disc KM 613 Ø40xH20mm grit 60 ( 4000844356 )
Sat, 09/06/2025
Scope of Delivery: - Flap sander KM 613 Ø40xH20mm grit 60 Product Description: Aluminium oxide - especially for hard-to-reach areas - suitable for all straight grinders and drills with speed control - adaptable flap structure and even removal rate - workpieces with complex surfaces and shapes are processed effortlessly - cool grinding that prevents tarnishing on the workpiece - shank Ø 6 mm Technical Data: - Colour: brown - Shank Ø: 6mm - Area of application: Stainless steel, universal metal - Binding: Synthetic resin - Width: 20mm - Maximum speed: 40m/s - Type of use: Straight grinder, Drill, Flexible shaft - Type of packaging: Cardboard boxFor commercial use, please observe the building regulations!
€38,72
-
KLINGSPOR KLINGSPOR flap disc KM 613 Ø30xH15mm grit size 80 ( 4000844353 )
Sat, 09/06/2025
Scope of Delivery: - Flap sander KM 613 Ø30xH15mm grit size 80 Product Description: Aluminium oxide - especially for hard-to-reach areas - suitable for all straight grinders and drills with speed control - adaptable flap structure and even removal rate - workpieces with complex surfaces and shapes are processed effortlessly - cool grinding that prevents tarnishing on the workpiece - shank Ø 6 mm Technical Data: - Colour: brown - Shank Ø: 6mm - Area of application: Stainless steel, universal metal - Binding: Synthetic resin - Width: 15mm - Maximum speed: 40m/s - Type of use: Straight grinder, Drill, Flexible shaft - Type of packaging: Cardboard boxFor commercial use, please observe the building regulations!
€36,95
-
PFERD PFERD flap disc Ø50xH30mm grit 40 ( 8000429727 )
Sat, 09/06/2025
Scope of Delivery: - Flap sander Ø50xH30mm grit 40 Product Description: aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm - also suitable for processing brass, copper and zinc Technical Data: - Shank Ø: 6mm - Drive type: Straight grinder, flexible shaft drive - Application recommendation: Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be machined, the coarser the surface (when using , An increase in the stock removal rate should be achieved by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. - Machinable materials: Copper, hardened, tempered steels over 1,200 N/mm² ( 54 HRC - Machining tasks: Gradual fine grinding, deburring, levelling, structuring (matting, line matting and satin finishing), surface processing, weld seam processing - Width: 30mm - Note: PFERDERGONOMICS recommends flap discs in order to sustainably reduce the vibration and noise generated during use and to improve working comfort. - Length, shaft: 40mm - RPM, opt.: 7000RPM - Safety instructions: For safety reasons, the specified maximum permissible speed must never be exceeded. The contact pressure must be significantly reduced if the specified optimum speed is exceeded. Safety is only guaranteed if the clamping length is at least 15 mm and the specified maximum speed is not exceeded with open shank lengths. - Advantages: Consistently high material removal over the entire service life, as new, aggressive abrasive is constantly released. Optimum contour adaptation due to high flexibility. Can be used very close to edges and at angles thanks to the flat casting core design.For commercial use, please observe the building regulations!
€12,77
-
PFERD PFERD abrasive sleeve carrier D45xH30mm ( 4200002012 )
Sat, 09/06/2025
Scope of Delivery: - Abrasive sleeve carrier D45xH30mm Product Description: made of rubber - cylindrical shape - the slots facilitate the expansion of the body during sanding, which tensions the abrasive sleeve and increases elasticity - the belt is non-slip - the abrasive sleeves can be pulled on and off with a slight clockwise rotation Technical Data: - nanFor commercial use, please observe the building regulations!
€23,82
-
OSBORN OSBORN brush Ø 30 mm 6 mm wire thickness 0.26 mm ( 4145125500 )
Sat, 09/06/2025
Scope of Delivery: - Brush Ø 30 mm 6 mm wire thickness 0.26 mm Product Description: knotted wire - galvanised sleeve - for roughening, deburring, paint stripping, descaling, matting and cleaning - shaft Ø 6 mm Technical Data: - nanFor commercial use, please observe the building regulations!
€29,42
-
PFERD PFERD Calibrating stone SE CU R5V L120xW50xH30mm ( 4143050034 )
Sat, 09/06/2025
Scope of Delivery: - Calibration stone SE CU R5V L120xW50xH30mm Product Description: Top side grit 30 (coarse): For profiling and honing large mounted points with coarse bonds and grits Underside grit 60 (fine): For profiling and honing mounted points with fine bonds and grit sizes Technical Data: - nanFor commercial use, please observe the building regulations!
€19,48
-
LESSMANN LESSMANN round brush Ø 75 mm wire thickness 0.5 mm ( 4000844913 )
Sat, 09/06/2025
Scope of Delivery: - Round brush Ø 75 mm Wire thickness 0.5 mm Product Description: knotted wire - suitable for coarse brushing work such as deburring and roughening, removing paint, scale or slag, removing sealants in hard-to-reach areas - shaft Ø 6 mm Technical Data: - nanFor commercial use, please observe the building regulations!
€16,98
-
LESSMANN LESSMANN brush Ø 30 mm shaft 6 mm wire thickness 0.3 mm ( 4000844893 )
Sat, 09/06/2025
Scope of Delivery: - Brush Ø 30 mm shaft 6 mm wire thickness 0.3 mm Product Description: crimped wire - universal and flexible for removing rust, paint, impurities, for light deburring work - stainless steel brushes are also suitable for removing temper colours in stainless steel weld seams - shaft Ø 6 mm Technical Data: - nanFor commercial use, please observe the building regulations!
€15,37
-
LESSMANN LESSMANN brush Ø 23 mm shaft 6 mm wire thickness 0.3 mm ( 4000844892 )
Sat, 09/06/2025
Scope of Delivery: - Brush Ø 23 mm shaft 6 mm wire thickness 0.3 mm Product Description: crimped wire - universal and flexible for removing rust, paint, impurities, for light deburring work - stainless steel brushes are also suitable for removing temper colours in stainless steel weld seams - shaft Ø 6 mm Technical Data: - nanFor commercial use, please observe the building regulations!
€15,58
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"