Scope of Delivery:
- 1x Makita DDF 489 cordless drill driver
- without battery, without charger
Product Description:
The Makita DDF 489 is a powerful, compact drill driver for drilling and screwdriving for universal use. The brushless cordless drill driver with 18 V and a newly designed gearbox with a very short design. The torque of 73 Nm can be set in 21 stages. A bright double LED ensures good visibility. Holes up to 38 mm ø can be drilled in wood. The diameter for holes in metal is 13 mm. The XPT - Extreme Protection Technology. Optimum protection against dust and splash water, even under tough conditions. It also has deep discharge protection. The tool switches off automatically when the battery is almost empty. Makita is a premium manufacturer of power tools, a long tradition and a high quality standard characterise the company.
Technical Data:
- Manufacturer: Makita
- Manufacturer's designation: DDF 489
- Battery voltage: 18 V
- Battery system: LXT
- Brushless motor: Yes
- Idle speed: 0 - 500 / 0 - 1800 min-¹
- Torque hard/soft: 73 / 40 Nm
- Torque settings: 21
- Drilling capacity in steel: 13 mm
- Holder: 1/2"-20UNF "
- Drill chuck clamping width: 1.5 - 13 mm
- Weight incl. battery (EPTA): 1.8 - 2.5 kg
- Product dimensions (L x W x H): 174 x 81 x 261 mm
- Battery type: Li-ion
- Max. Power output: 620 W
- Drilling capacity in wood (auger drill): 38 mm
- Drilling capacity in wood (Forstner bit): 51 mm
- Sound pressure level (LpA): 77 dB(A)
- K-value noise: 3 dB(A)
- Vibration: ≤ 2.5 m/s²
- K-value vibration: 1.5 m/s²
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Scope of Delivery:
- 1x Rothenberger RO BC14/36 charger EU ( 1000001654 )
Product Description:
The ROTHENBERGER battery technology revolutionises the ROTHENBERGER battery range. Thanks to the latest battery technology and intelligent battery management between the battery and the machine, the batteries have unprecedented reserves of endurance. This charger is suitable for charging all RO BP batteries. It has the patented "AIR COOLED" charging technology with a charging current of 3.0 Ah and a very low stand-by power consumption. The processor-controlled charge management system ensures gentle charging.
Technical Data:
- Charging current: 3.0A
- Weight: 0.58 kg
- Voltage: from 14.4 - 36 V
- Dimensions (length x width x height): 155 x 120 x 80 mm
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Scope of Delivery:
- 1x DeWalt DCF 892 cordless impact wrench 18 V
- 1x metal belt hook
- 2x DeWalt DCB 183 18 V 2.0 Ah battery
- 1x Dewalt DCB XR charger
- 1x DeWalt TSTAKt
Product Description:
The latest generation DeWalt DCF 892 cordless impact wrench offers powerful performance in a compact and lightweight design. Equipped with innovative brushless motor technology, it enables longer runtime per battery charge and a longer service life. The impact wrench has a 4-stage setting, including a control stage, which ensures maximum control in all applications. The speed and impact rate as well as the torque can be precisely regulated via the finely adjustable throttle switch. An additional electronic control stage prevents accidental over-tightening of the screw or damage to the material. In reverse, it reduces the speed as soon as the screw is safely unscrewed without the support of the impact mechanism. With a high tightening torque of over 800 Nm and a loosening torque of almost 1100 Nm, the cordless impact wrench is ideal for extremely heavy-duty screwdriving tasks. The safety electronics ensure trouble-free long-term use by continuously monitoring the battery temperature, current consumption and discharge protection. The high-quality and robust aluminium impact housing ensures optimum heat exchange and thus increases the service life of the tool. The 1/2" external square drive with ball lock ensures that the insert tools sit securely. The DeWalt DCF 892 cordless impact wrench is not only extremely compact and lightweight, but also offers perfect handling thanks to its ergonomic rubberised grip areas. With a total length of only 175 mm, it can be used without any problems even in confined spaces. A very powerful and individually adjustable LED ensures optimum visibility at the workplace. The robust metal belt hook allows for easy use. The cordless impact wrench is compatible with all 18-volt XR or XR Flexvolt batteries from DeWalt.
Technical Data:
- Manufacturer: DeWalt
- Manufacturer's designation: DCF 892
- Supply voltage: 18 V
- Drive: 1/2"
- Tightening torque: 813 Nm
- Torque: 1100 Nm
- Impact rate per min.: 0-3250
- Product weight: 1.7 kg
- Product length: 178 mm
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Scope of Delivery:
- 1x DeWalt DCS 691 N cordless cut-off saw 54 V
- without battery, without charger
Product Description:
The DeWalt DCS 691 cordless cut-off sander is the powerful and cordless solution for heavy-duty cutting work in construction, gardening, landscaping and road building. Equipped with the innovative 54V XR FLEXVOLT technology, this cordless cut-off machine delivers impressive performance that can easily keep up with corded tools - with maximum freedom of movement. The brushless motor not only provides more power and a more compact design, but also significantly extends the service life of the tool. With a cutting depth of up to 83 mm, the DCS 691 cuts materials such as paving stones, roof tiles, reinforcing steel or concrete with ease. The robust all-metal direct gearbox ensures optimum power transmission, while the motor brake stops the cutting disc immediately after the switch is released - for maximum safety during use. The double-sided water supply with water connection as standard ensures effective dust binding during cutting work in mineral materials, supported by rear air inlets with a labyrinth design that efficiently cool the motor and protect it from dirt. The tool-free adjustable protective bonnet with 5 positions can be flexibly adapted to the respective application. The integrated WIRELESS TOOL CONNECT (WTC) allows the cut-off machine to be wirelessly connected to a WTC-compatible hoover, making work even more efficient and cleaner. An LED overload indicator provides real-time information on the current load during use to enable optimum control and device protection. The lockable battery compartment reliably protects the battery from dust and water particles, while the ergonomic rubberised handles ensure a high level of comfort and a secure grip during long periods of use.
Technical Data:
- Manufacturer: DeWalt
- Manufacturer's designation: DCS 691 N
- Water connection: Yes
- Arbor size: 22 mm
- Product width: 185 mm
- CE marking: Yes
- Swivelling guard: Yes
- Product weight: 4.8 kg
- Wireless tool control - WTC: Yes
- Blade diameter: 230 mm
- Cutting capacity: 83 mm
- Power source: Rechargeable battery
- Product length: 652 mm
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Scope of Delivery:
- 1x Black & Decker CS 1250 L hand-held circular saw
- 1x saw blade
Product Description:
The Black & Decker CS 1250 L hand-held circular saw impresses with a powerful 1250-watt motor and enables precise cuts with a cutting depth of up to 66 mm at 90° and 50 mm at 45°. Thanks to the quick-release lever, the cutting depth and mitre angle can be adjusted quickly and continuously – ideal for precise adjustments directly on the workpiece. Its compact and ergonomic design and rubberised handles ensure high operating comfort and maximum control during work. The stable, large saw shoe with a clear line of sight to the workpiece supports precise sawing. An integrated laser provides additional guidance for particularly accurate cuts. The dust extraction connection ensures a clean working environment, while the spindle lock allows quick and easy saw blade changes.
Technical Data:
- Manufacturer: Black & Decker
- Manufacturer's designation: CS 1250 L
- No-load speed (RPM): 5300
- Saw blade diameter: 190 mm
- Max. cutting depth: 66 mm
- Power source: Corded
- Battery voltage: 230 V
- Power consumption: 1250 W
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Package contents:
- 1x Rothenberger RO BP18/4 Li-HD Battery - 18V / 4.0 Ah ( 1000002548 )
Product description:
The RO BP18/4 Li-HD battery from Rothenberger is even stronger and more compact thanks to its new Li-HD technology: the battery has more compact and lighter cells with lower weight and more elegant batteries with the same performance. As part of the Cordless Alliance System (CAS), the 4.0 Ah 18V battery can be used on more than 110 machines from different manufacturers: CAS links nine tool manufacturers using the same battery technology. The battery ensures a long service life thanks to its optimal protection against dirt. The external rubber coating also makes it very robust. The capacity indicator is used to continuously monitor the battery status. It can be stored for a long period of time because there is almost no self-discharge.
Technical specifications:
Voltage: 18 V
Dimensions ( Length x width x height ): 12.1 x 8.1 x 5.5 cm
Weight: 590 g
Capacity: 4.0 Ah
Package contents:
- 1x Rothenberger ROMAX 4000 Cordless Electro-Hydraulic Press Machine 18 V Li-Ion
- 1x Carry case with insert
- without battery, without charger
Product description:
The ROMAX® 4000 is an electro-hydraulic cordless press machine from Rothenberger for pressing fittings up to 110 mm in diameter and from 32 to 34 kN depending on the system. By using more powerful battery technology, a higher compression per charge is possible. Its low weight of 3.6 kg and balanced weight distribution reduce fatigue and allow ergonomic and energy-saving work over a long period of time. The CFT® technology deployed ensures the required compression force during compression. The improved service interval of 40,000 press cycles / 2 years ensures high productivity.
Technical specifications:
Voltage: 18 V
Dimensions: 59 x 38.4 x 14.3 cm
Weight incl. case: 6.73 kg
REACH Compliance: Yes
RoHS Compliance: Yes
Country of origin: Germany
Net weight: 7.2 kg
Diameter of the working area (MM): 12 mm
Diameter of the working area up to (MM): 110 mm
Scope of Delivery:
- 1x DeWalt DCMPS 567 N cordless pruner 18 V
- without battery, without charger
Product Description:
The DeWalt DCMPS 567 cordless pole pruner is the ideal solution for working safely and comfortably at great heights - without the need for a ladder. With a total length of up to 4.5 m thanks to the extension pole, it offers an impressive reach for precise limbing. The angled head ensures better control and optimum cutting guidance even in difficult positions. Powered by a highly efficient, brushless motor, the pruner can make up to 55 powerful cuts on 100 × 100 mm branches per battery charge. The 20 cm long bar with low kickback chain and automatic chain lubrication ensures consistent cutting performance and low maintenance. A robust metal handle and integrated tree hook ensure stable cutting and make it easier to remove the sawn branches. Ideal for garden owners, landscape gardeners and professional users who prioritise long reach, performance and ergonomics.
Technical Data:
- Manufacturer: DeWalt
- Manufacturer's designation: DCMPS 567 N
- Battery voltage: 18 V
- Brushless: Yes
- Product weight : 3,8 Kg
- Bar length : 20 cm
- Power source: Cordless
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Lieferumfang:- 1x DeWalt DWE 4257 Betonschleifer / Winkelschleifer (ohne Koffer!)- Geräte Zubehör (siehe Bilder )
Zustand:
- Gebraucht, Vom Hersteller repariert und geprüft- Kratzer und Verschmutzungen (siehe Bilder)- Voll funktionsfähig- Sofort lieferbar
Produktbeschreibung:Der DeWalt DWE 4257 Betonschleifer / Winkelschleifer überzeugt durch seinen leistungsstarken Motor dank einem hohen Kupferanteil und seinem flachen Getriebegehäuse für einen problemlosen Einsatz bei eingeengten Platzverhältnissen. Er verfügt über einen elektronischen Sanftanlauf und verhindert somit ein ruckartiges Anlaufen der Maschine. Der Überlastschutz verhindert ein Durchbrennen des Motors durch Abschalten bei Überlastbetrieb. Der DeWalt DWE 4257 Betonschleifer / Winkelschleifer besitzt einen vibrationsdämpfenden Zusatzhandgriff für ein sicheres und ermüdungsarmes Arbeiten. Für einen einfachen und sicheren Scheibenwechsel sorgt die spezielle Flanschmutter.
Technische Daten:Aufnahmeleistung: 1500 WattLeerlaufdrehzahl: 2.800-10.500 U/minMax. Scheibendurchmesser: 125 mmGewicht: 2,6 kgBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!
Package contents:
- 1x Festool TDC 18/4 18V Cordless Drill
- 1x Bit Festool PZ 2
- 1x Magnetic Bit Holder Festool CENTROTEC BH 60 CE-Imp magnetic bit holder
- 1x Drill Chuck Festool CENTROTEC
- 1x Keyless Chuck FastFix Festool 13 mm KC 13-1/2-MMFP
- 1x Additional Hand Grip Festool
- 1x Case Systainer Festool SYS3 M 187
Product description:
The Festool TDC 18/4 cordless screwdriver impresses with its compact design and high performance, which makes it possible to work comfortably and efficiently even with the highest demands. With its 4 speeds, this device covers all situations: from screwing at a torque of 50 Nm, in 1st speed, to precise drilling at 3600 rpm, in 4th speed. Its EC-TEC brushless motor combines strength and endurance with low wear and tear and optimum service life. Its FastFix interface allows quick bit changes without the need for tools and its KickbackStop function minimises the risk of serious injury if the drill suddenly jams, thus protecting the user's health. Festool is a manufacturer of high-quality power tools, which is characterised above all by its long tradition and high manufacturing quality.
Technical specifications:
Manufacturer: Festool Festool
Manufacturer's designation : TDC 18/4
Manufacturer's number: 575601
Battery voltage : 18 V
Gears: 4
Idling speed, 1st gear/2nd gear: 0 - 500/0 - 800 rpm
Idling speed, 3rd/4th gear: 0 - 2350/0 - 3600 rpm
Drilling diameter, wood/steel: 70/13 mm
Torque adjustment 1st/2nd gear: 2 - 20/2 - 20 Nm
Max. torque, wood/steel: 50/75 Nm
Chuck range: 1.5 - 13 mm
Battery capacity: 4.0/5.2 Ah
Product weight with battery: 1.9/2.0 kg
Drive type: battery
Drilling in metal: Total vibration average, Ah: 3.00 m/s².
Drilling in metal: Standards series EN 62841
Drilling in metal: Uncertainty (noise) K: 5.00 dB
Drilling in metal: Uncertainty (vibration) K: 1.50 m/s².
Drilling in metal: A-weighted sound pressure level, LpA: 73.00 dB(A)
Drilling in metal: A-weighted sound power level, LWA: 84.00 dB(A)
Fastening: Total vibration average, Ah: 2.50 m/s².
Fastening: Standards series EN 62841
Fastening: Uncertainty (noise) K: 5.00 dB
Fastening: Uncertainty (vibration) K: 1.50 m/s².
Fastening: A-weighted sound pressure level, LpA: 73.00 dB(A)
Fastening: A-weighted sound power level, LWA: 84.00 dB(A)
Lieferumfang:- 1x Makita DDF 485 Z Akku Bohrschrauber - ohne Akku, ohne Ladegerät
Zustand:- „Herstellergeprüft & überholt“ - Kratzer und Verschmutzungen (siehe Bilder)- Voll funktionsfähig- Sofort lieferbar
Produktbeschreibung:Das Elektrowerkzeug ist für Bohren und Schrauben in Holz, Metall und Kunststoff vorgesehen. Der bürstenlose Motor und das Vollmetall-Planetengetriebe sorgen für mehr Ausdauer, längere Lebensdauer und kompaktere Bauweise des Akku-Bohrschraubers. Mit dem Schnellbohrfutter bis 13 mm kann eine Vielzahl von Werkzeugen eingespannt werden. Die 21 Drehmomentstufen plus Bohrstufe passen den Bohrschrauber an das jeweilige Werkstück an. Die leuchtstarke Doppel-LED mit Nachglimmfunktion sorgt für optimale Sichtverhältnisse beim Arbeiten. Der Akku-Bohrschrauber ist durch seine kompakte Bauform ein praktischer Helfer für eine Vielzahl von Anwendungen. Technische Daten:Akkuspannung: 18 VMax. Drehmoment (weich): 27 NmMax. Drehmoment (hart): 50 NmMotorart: bürstenlosLeerlaufdrehzahl 1. Gang: 0-500 min-1Leerlaufdrehzahl 2. Gang: 0-1900 min-1Max. Bohrleistung (Stahl): 13 mmMax. Bohrleistung (Holz): 38 mmBohrfutterspannweite: 1,5-13 mmMaße (LxBxH): 169x79x255 mmGewicht: 1,4 kgBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!
Lieferumfang:- 1x Makita DDF 482 Z 18 V Li-Ion Akku Bohrschrauber- ohne Zubehör, ohne Akku, ohne Ladegerät
Zustand:
- Stark Gebrauchter Zustand (siehe Bilder)- Weist Kratzer und Verschmutzungen auf- Vollfunktionsfähig - Sofort lieferbar
Produktbeschreibung:Der Makita DDF 482 ist ein kraftvoller Li-Ion Akku Bohrschrauber mit 2-Gang-Vollmetall-Planetengetriebe. Das Drehmoment lässt sich in 21 Stufen perfekt für jeden Einsatz einstellen und eine leuchtstarke LED mit Nachglimmfunktion sorgt für optimale Sichtverhältnisse. Weiterhin verfügt der Akku Bohrschrauber über einen aufwändigen Schutz gegen Staub und Spritzwasser. Die Motorbremsen garantieren mehr Kontrolle wie auch eine exakte Schraubarbeit; durch den gummierten, ergonomischen Handgriff und die kompakte Bauweise wird sicherer Halt und komfortables Arbeiten geleistet.Technische Daten:Leerlaufdrehzahl 1. Gang: 0 - 600 min-1Leerlaufdrehzahl 2. Gang: 0 - 1.900 min-1Bohrleistung in Holz: 38 mmBohrleistung in Stahl: 13 mmDrehmoment weich: 36 NmDrehmoment hart: 62 NmBohrfutterspannweite: 1,5 - 13 mmAkkuspannung: 18 VMaße (LxBxH): 185x79x249 mmGewicht (ohne Akku/Seitengriff): 1,7 kgBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!
