Direkt ist günstiger für Dich!

Wusstest du, dass Preisvergleich-Plattformen und Suchmaschinen bei jedem Kauf fett mitverdienen? Über 20 % vom Preis gehen nur für Werbung drauf – und das zahlen am Ende alle mit. Wir sagen: Nein danke und möchten die Werbekosten lieber als Preisreduktion an Euch weitergeben!

Aus diesem Grund übermitteln wir nicht mehr unseren gesamten Bestand, die Bestpreis-Angebote und Deals an die großen Plattformen und können Dir so - neben den Geschenken, BROpoints und anderen Vorteilen - wesentlich bessere Preise geben, die Du ausschließlich bei uns findest. Deswegen lohnt es sich, ohne Umwege, direkt zu uns zu kommen.

Initiative für bessere Preise und mehr Fairness im Online-Handel.

Finde hier ALLE ANGEBOTE, für die wir derzeit den Online-Bestpreis haben.

Neueste Artikel

Show previous products

NITRAS NITRAS safety shoe EASY STEP size 43 black ( 8000444604 )

Wed, 11/19/2025

Scope of Delivery: - 1x NITRAS safety shoe EASY STEP size 43 black Product Description: according to EN ISO 20345 - S1P SRC - upper material: resistant suede leather - resistant and non-marking PU/TPU outsole - fibreglass toe cap - puncture-resistant textile midsole - metal-free - high-quality 700C insole // COMFORT STEP - ergonomically shaped - attractive design - best possible slip resistance (SRC) - reflective element on the side - according to DGUV 112-191 - width 11 on request also available from size 36 up to size 50. 36 and up to size 50 available on request Technical Data: - Protective toe cap: fibreglass - Midsole: metal-freeFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€45,12
NITRAS NITRAS safety shoe EASY STEP size 42 black ( 8000444603 )

Wed, 11/19/2025

Scope of Delivery: - 1x NITRAS safety shoe EASY STEP size 42 black Product Description: according to EN ISO 20345 - S1P SRC - upper material: resistant suede leather - resistant and non-marking PU/TPU outsole - fibreglass toe cap - puncture-resistant textile midsole - metal-free - high-quality 700C insole // COMFORT STEP - ergonomically shaped - attractive design - best possible slip resistance (SRC) - reflective element on the side - according to DGUV 112-191 - width 11 on request also available from size 36 up to size 50. 36 and up to size 50 available on request Technical Data: - Protective toe cap: fibreglass - Midsole: metal-freeFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€45,12
NITRAS NITRAS safety shoe EASY STEP size 41 black ( 8000444602 )

Wed, 11/19/2025

Scope of Delivery: - 1x NITRAS safety shoe EASY STEP size 41 black Product Description: according to EN ISO 20345 - S1P SRC - upper material: resistant suede leather - resistant and non-marking PU/TPU outsole - fibreglass toe cap - puncture-resistant textile midsole - metal-free - high-quality 700C insole // COMFORT STEP - ergonomically shaped - attractive design - best possible slip resistance (SRC) - reflective element on the side - according to DGUV 112-191 - width 11 on request also available from size 36 up to size 50. 36 and up to size 50 available on request Technical Data: - Protective toe cap: fibreglass - Midsole: metal-freeFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€45,12
NITRAS NITRAS safety shoe EASY STEP size 40 black ( 8000444601 )

Wed, 11/19/2025

Scope of Delivery: - 1x NITRAS safety shoe EASY STEP size 40 black Product Description: according to EN ISO 20345 - S1P SRC - upper material: resistant suede leather - resistant and non-marking PU/TPU outsole - fibreglass toe cap - puncture-resistant textile midsole - metal-free - high-quality 700C insole // COMFORT STEP - ergonomically shaped - attractive design - best possible slip resistance (SRC) - reflective element on the side - according to DGUV 112-191 - width 11 on request also available from size 36 up to size 50. 36 and up to size 50 available on request Technical Data: - Protective toe cap: fibreglass - Midsole: metal-freeFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€45,12
Options

PFERD PFERD Schleifstift POLINOX D80xHmm 6 mm ( 8000435051 )

Lieferumfang:1x PFERD Schleifstift POLINOX D80xHmm 6 mmProduktbeschreibung: aus Polyamidvlies · Schleifvlies ist in Ronden (axial) übereinander angeordnet Weitere technische Daten: Antriebsart: Geradschleifer, Biegwellenantrieb Anwendungsempfehlung: Für beste Leistung bei einer empfohlenen Schnittgeschwindigkeit von 10-20 m/s einsetzen. Hierbei wird ein idealer Kompromiss zwischen Abtragsleistung, Oberflächengüte, Temperaturbelastung des Werkstückes und Werkzeugverschleiß erreicht. Bearbeitbare Werkstoffe: Nickelbasislegierungen (z. B. Inconell und Hasteloy), Edelstahl (INOX), Zink, Titanlegierungen, Titan, Thermoplaste, Stähle bis 1.200 N/mm² (< 38 HRC), Messing, Stahlwerkstoffe mit einer Härte > 54 HRC, Aluminium, Bronze, Stahlguss, Kobaltbasislegierungen, Kupfer, Faserverstärkte Duroplaste (GFK, CFK), Gehärtete, vergütete Stähle über 1.200 N/mm² (< 38 HRC) Bearbeitungsaufgaben: Reinigen, Entgraten, Strukturieren (Mattieren, Strichmattieren und Satinieren), Stufenweises Feinschleifen, Aufrauen, Flächenbearbeitung Breite: 50mm Hinweis: PFERDERGONOMICS empfiehlt POLINOX-Schleifstifte, um die beim Einsatz entstehende Vibrations- und Lärmentwicklung nachhaltig zu senken und den Arbeitskomfort zu verbessern. Länge, Schaft: 40mm RPM, opt.: 4000RPM Sicherheitshinweise: Die maximal zulässige Umfangsgeschwindigkeit beträgt 32 m/s. Die angegebene maximal zulässige Drehzahl darf aus Sicherheitsgründen nie überschritten werden. Vorteile: Kein Zusetzen des Werkzeuges durch offene Struktur und hohe Flexibilität des Vliesmaterials. Optimale Konturenanpassung durch hohe Flexibilität. Kühler Schliff und geringe thermische Belastung des Werkstückes.

Read more less

Pre-order
€195,73

Options
Options

PFERD PFERD mounted point POLINOX D80xHmm 6 mm ( 8000435050 )

Scope of Delivery: - 1x PFERD mounted point POLINOX D80xHmm 6 mm Product Description: made of polyamide fleece - abrasive fleece is arranged in discs (axially) on top of each other Technical Data: - Drive type: Flexible shaft drive, straight grinder - Application recommendation: Use at a recommended cutting speed of 10-20 m/s for best performance. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. - Machinable materials: Titanium, cobalt-based alloys, steels up to 1,200 N/mm² ( 54 HRC, thermoplastics, titanium alloys, zinc, bronze - Machining tasks: Surface processing, cleaning, deburring, fine grinding in stages, structuring (matting, line matting and satin finishing), roughening - Width: 50mm - Note: PFERDERGONOMICS recommends POLINOX mounted points in order to sustainably reduce the vibration and noise generated during use and to improve working comfort. - Length, shank: 40mm - RPM, opt.: 4000RPM - Safety instructions: The maximum permissible peripheral speed is 32 m/s. For safety reasons, the specified maximum permissible speed must never be exceeded. - Advantages: No clogging of the tool due to the open structure and high flexibility of the non-woven material. Optimum contour adaptation due to high flexibility. Cool grinding and low thermal load on the workpiece.For commercial use, please observe the building regulations!

Read more less

Pre-order
€195,73

Options
Options

PFERD PFERD Schleifhülse GSB D45xB30mm30 mm Körnung 40 ( 8000433900 )

Lieferumfang:1x PFERD Schleifhülse GSB D45xB30mm30 mm Körnung 40Produktbeschreibung: für grobe Schleifaufgaben bei hoher Abtragsleistung und Standzeit · GSB = Großpack Schleifhülsen · Lieferung ohne Gummiträger Weitere technische Daten: Antriebsart: Biegwellenantrieb, Geradschleifer Anwendungsempfehlung: Für einen sicheren Sitz der Schleifhülse die Mindestdrehzahl des Schleifhülsenträgers einhalten. Für einen leichten Wechsel der Schleifhülsen diese unter leichter Rechtsdrehung auf- und abziehen. Dabei den Schleifhülsenträger in den Werkzeugantrieb eingespannt lassen. Für den Werkstoff geeignetes Schleiföl verwenden, um die Standzeit und Schleifleistung der Werkzeuge deutlich zu erhöhen. Für beste Leistung bei einer empfohlenen Schnittgeschwindigkeit von 20-30 m/s einsetzen. Bearbeitbare Werkstoffe: Stahlwerkstoffe mit einer Härte > 54 HRC, Gehärtete, vergütete Stähle über 1.200 N/mm² (< 38 HRC), Stahlguss, Stähle bis 1.200 N/mm² (< 38 HRC), Edelstahl (INOX), Temperguss, Messing, Grau-/Sphäroguss (GG/GJL, GGG/GJS), Bronze, Kupfer, Kobaltbasislegierungen, Titan Bearbeitungsaufgaben: Kantenbearbeitung, Stufenweises Feinschleifen, Flächenbearbeitung, Schärfen, Aufrauen, Egalisieren, Schweißnahtbearbeitung, Entgraten Bestellhinweise: Schleifhülsenträger bitte separat bestellen. Ø Innen: 45mm RPM, opt., bis: 12700RPM RPM, opt., von: 8500RPM Sicherheitshinweise: Die maximal zulässige Umfangsgeschwindigkeit beträgt 30 m/s. Die angegebene maximal zulässige Drehzahl darf aus Sicherheitsgründen nie überschritten werden. Schleifhülsen nicht über den Schleifhülsenträger überstehen lassen. Vorteile: Herausragende Standzeit durch spezielles Fertigungsverfahren – auch unter härtesten Einsatzbedingungen. Höchste Wirtschaftlichkeit durch besonders hohen Materialabtrag und hohe Aggressivität des Schleifmittels. Sicherer Sitz der Schleifhülse auf dem Schleifhülsenträger durch Ausdehnen des Trägers im Einsatz.

Read more less

Pre-order
€127,96

Options
PFERD PFERD abrasive sleeve GSB CO-COOL D30xW30mm30 mm grit size 36 ( 8000433831 )

Wed, 11/19/2025

Scope of Delivery: - 1x PFERD abrasive sleeve GSB CO-COOL D30xW30mm30 mm grit size 36 Product Description: for grinding hard, tough and poorly heat-conducting materials - self-sharpening ceramic grain - abrasive additives in the coating achieve a significantly higher stock removal rate, prevent clogging and ensure cooler grinding - GSB = bulk pack of abrasive sleeves - supplied without rubber backing Technical Data: - Drive type: Straight grinder, flexible shaft drive - Application recommendation: Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 20-30 m/s. For a secure fit of the abrasive sleeve, maintain the minimum speed of the abrasive sleeve holder. To make it easy to change the abrasive sleeves, turn them slightly clockwise to mount and remove them. Keep the abrasive sleeve carrier clamped in the tool drive. - Machinable materials: Titanium, grey/spheroidal cast iron (GG/GJL, GGG/GJS), cobalt-based alloys, bronze, malleable cast iron, aluminium, stainless steel (INOX), nickel-based alloys (e.g. Inconell and Hasteloy) - Machining tasks: Deburring, levelling, surface processing, weld seam processing, fine grinding in stages, sharpening, edge processing, roughening - Ordering information: Please order abrasive sleeve holder separately. - Ø inside: 30mm - RPM, opt., up to: 19100RPM - RPM, opt., from: 13000RPM - Safety instructions: The maximum permissible peripheral speed is 30 m/s. For safety reasons, the specified maximum permissible speed must never be exceeded. Do not allow the abrasive sleeves to protrude beyond the abrasive sleeve holder. - Advantages: Secure fit of the abrasive sleeve on the abrasive sleeve carrier due to expansion of the carrier during use. Outstanding service life thanks to special manufacturing process - even under the toughest operating conditions. The packaging size is ideal for industrial requirements. Maximum cost-effectiveness thanks to particularly high material removal and high abrasive aggressiveness.For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€119,86
Options

PFERD PFERD abrasive sleeve GSB CO-COOL D15xW30mm30 mm grit size 80 ( 8000433818 )

Scope of Delivery: - 1x PFERD abrasive sleeve GSB CO-COOL D15xW30mm30 mm grit size 80 Product Description: for grinding hard, tough and poorly heat-conducting materials - self-sharpening ceramic grain - abrasive additives in the coating achieve a significantly higher stock removal rate, prevent clogging and ensure cooler grinding - GSB = bulk pack of abrasive sleeves - supplied without rubber backing Technical Data: - Drive type: Straight grinder, flexible shaft drive - Recommendation for use: For easy replacement of the sanding sleeves, pull them on and off with a slight clockwise rotation. Keep the abrasive sleeve holder clamped in the tool drive. For best performance, use at a recommended cutting speed of 20-30 m/s. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For a secure fit of the abrasive sleeve, observe the minimum speed of the abrasive sleeve carrier. - Machinable materials: Nickel-based alloys (e.g. Inconell and Hasteloy), aluminium, malleable cast iron, bronze, grey/spheroidal cast iron (GG/GJL, GGG/GJS), stainless steel (INOX), titanium, cobalt-based alloys - Machining tasks: Roughening, deburring, levelling, sharpening, surface processing, weld seam processing, edge processing, fine grinding in stages - Ordering information: Please order abrasive sleeve holder separately. - Ø inside: 15mm - RPM, opt., up to: 36000RPM - RPM, opt., from: 26000RPM - Safety instructions: The maximum permissible peripheral speed is 30 m/s. For safety reasons, the specified maximum permissible speed must never be exceeded. Do not allow abrasive sleeves to protrude beyond the abrasive sleeve carrier. - Advantages: Outstanding service life thanks to special manufacturing process - even under the toughest operating conditions. Secure fit of the abrasive sleeve on the abrasive sleeve carrier due to expansion of the carrier during use. The packaging size is ideal for industrial requirements. Maximum cost-effectiveness thanks to particularly high material removal and high abrasive aggressiveness.For commercial use, please observe the building regulations!

Read more less

Pre-order
€103,66

Options
PFERD PFERD abrasive sleeve GSB CO-COOL D15xW30mm30 mm grit size 60 ( 8000433817 )

Wed, 11/19/2025

Scope of Delivery: - 1x PFERD abrasive sleeve GSB CO-COOL D15xW30mm30 mm grit size 60 Product Description: for grinding hard, tough and poorly heat-conducting materials - self-sharpening ceramic grain - abrasive additives in the coating achieve a significantly higher stock removal rate, prevent clogging and ensure cooler grinding - GSB = bulk pack of abrasive sleeves - supplied without rubber backing Technical Data: - Drive type: Flexible shaft drive, straight grinder - Application recommendation: For best performance, use at a recommended cutting speed of 20-30 m/s. For an easy change of the abrasive sleeves, mount and remove them with a slight clockwise rotation. Keep the abrasive sleeve holder clamped in the tool drive. For a secure fit of the abrasive sleeve, maintain the minimum speed of the abrasive sleeve carrier. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. - Machinable materials: Bronze, cobalt-based alloys, grey/spheroidal cast iron (GG/GJL, GGG/GJS), nickel-based alloys (e.g. Inconell and Hasteloy), titanium, aluminium, malleable cast iron, stainless steel (INOX) - Machining tasks: Deburring, weld seam processing, surface processing, sharpening, roughening, fine grinding in stages, levelling, edge processing - Ordering information: Please order abrasive sleeve holder separately. - Ø inside: 15mm - RPM, opt., up to: 36000RPM - RPM, opt., from: 26000RPM - Safety instructions: The maximum permissible peripheral speed is 30 m/s. For safety reasons, the specified maximum permissible speed must never be exceeded. Do not allow the abrasive sleeves to protrude beyond the abrasive sleeve holder. - Advantages: Secure fit of the abrasive sleeve on the abrasive sleeve carrier due to expansion of the carrier during use. The packaging size is ideal for industrial requirements. Outstanding service life thanks to special manufacturing process - even under the toughest operating conditions. Maximum cost-effectiveness thanks to particularly high material removal and high abrasive aggressiveness.For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€103,66
PFERD PFERD round brush RBU ST Ø 20 mm wire thickness 0.2 mm ( 8000433010 )

Wed, 11/19/2025

Scope of Delivery: - 1x PFERD round brush RBU ST Ø 20 mm wire thickness 0.2 mm Product Description: for cleaning, derusting, smoothing, cleaning weld seams, light deburring and removing corrosion and paint - steel wire trim material has a high tensile and flexural fatigue strength - ensures optimum wear of the wire and a long service life, even in extreme brushing applications Steel wire can withstand temperatures up to 300 °C. Shank Ø 6 mm Technical Data: - Drive type: Straight grinder, drill, flexible shaft drive - Application recommendation: For best performance, use a tool drive with at least 300 watts. Please observe the recommended speeds. - Mounting system: Shank - Machinable materials: Cast iron, wood, thermoplastics, steel, cast steel, elastomers, thermosets - Machining tasks: Deburring, derusting, removing oxide layers, paint stripping, roughening, cleaning - Filament material: Steel wire (ST) - Length, filament: 3mm - Ø fill material: 0.2mm - Ø shank: 6mm - RPM, opt., up to: 15000RPM - RPM, opt., from: 10000RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Packaging: Industrial packaging - Advantages: Produces fine surfaces. Long tool life thanks to the use of PFERD special wire. Optimum adaptation to the contour of the workpieces thanks to high flexibility. - RPM, max.: 20000RPMFor commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€15,82
PFERD PFERD brush PBUL INOX Ø 10 mm wire thickness 0.2 mm ( 8000432679 )

Wed, 11/19/2025

Scope of Delivery: - 1x PFERD brush PBUL INOX Ø 10 mm wire thickness 0.2 mm Product Description: PFERD offers two special versions for special tasks: PBUL Particularly long version for use in hard-to-reach places. PBUS Tapered shape for precise work in hard-to-reach places. Shank Ø 6 mm Technical Data: - Drive type: Straight grinder, drilling machine, flexible shaft drive - Application recommendation: Please observe the recommended speeds. For best performance, use a tool drive with at least 300 watts. - Machinable materials: Thermoplastics, wood, steel, cast steel, elastomers, thermosets, cast iron - Machining tasks: Deburring, cleaning, paint stripping, roughening, derusting, removing oxide layers - Trimming material: Steel wire (ST) - Ø shaft: 6mm - Ø cup: 10mm - RPM, opt., up to: 9500RPM - RPM, opt., from: 4000RPM - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm. - Advantages: Produces fine surfaces. Optimum access to hard-to-reach areas. Long service life thanks to the use of PFERD special wire.For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€14,24