Neueste Artikel
-
HELLER HELLER hammer drill Trijet Ø 12 mm working l.200 mm l.260 mm ( 8000656699 )
Sat, 10/18/2025
Scope of Delivery: - Hammer drill Trijet Ø 12 mm working l.200 mm l.260 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
€25,03
-
HELLER HELLER hammer drill Trijet Ø 8 mm working l.400 mm l.460 mm ( 8000656694 )
Sat, 10/18/2025
Scope of Delivery: - Hammer drill Trijet Ø 8 mm working l.400 mm l.460 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
€37,57
-
HELLER HELLER hammer drill Trijet Ø 8 mm working l.200 mm l.260 mm ( 8000656693 )
Sat, 10/18/2025
Scope of Delivery: - Hammer drill Trijet Ø 8 mm working l.200 mm l.260 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 140°For commercial use, please observe the building regulations!
€22,06
-
HELLER HELLER Hammer drill Y-Cutter Ergo D.30 mm Working-L.400 mm L.450 mm ( 8000656336 )
Scope of Delivery: - Hammer drill Y-Cutter Ergo D.30 mm Working L.400 mm L.450 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 160°For commercial use, please observe the building regulations!
-
HELLER HELLER Hammer drill Y-Cutter Ergo D.28 mm Working-L.400 mm L.450 mm ( 8000656335 )
Scope of Delivery: - Hammer drill Y-Cutter Ergo D.28 mm Working-L.400 mm L.450 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 160°For commercial use, please observe the building regulations!
-
HELLER HELLER Hammer drill Y-Cutter Ergo D.24 mm Working-L.400 mm L.450 mm ( 8000656332 )
Sat, 10/18/2025
Scope of Delivery: - Hammer drill Y-Cutter Ergo D.24 mm Working-L.400 mm L.450 mm Product Description: 3-blade turbine cutting edge for increased effectiveness when removing material - increased power transmission when drilling thanks to wave-shaped head design - maximum service life thanks to extremely wear-resistant single-phase carbide alloy - withstands even hits from reinforcement - extremely fast drill dust transport without deflagration thanks to wide helix shape - vibration-optimised triple helix - certified by the Prüfgemeinschaft Mauerbohrer (PGM) in accordance with the requirements of the German Institute for Building Technology (DIBt) Area of application: Concrete, even the hardest grades, reinforced concrete, natural stone, masonry, clinker brick Technical Data: - Suitable for concrete: yes - Suitable for stone: yes - Suitable for reaming: yes - Shank diameter: 10mm - Cutting direction: right - Cutting material: carbide - Twist drill: yes - Angle of the tip: 160°For commercial use, please observe the building regulations!
€92,67
-
Metabo METABO suction hose set 7 m inner Ø 25 mm ( 8000655610 )
Sat, 10/18/2025
Scope of Delivery: - Suction hose set 7 m inner Ø 25 mm - Suction hose, hinge pin clamps galvanised steel, high-pressure suction coupling MS-1″ grommet, quick coupling MS-1″ AG, hose grommet/O-ring MS-1″ AG, non-return valve MS-1″ IG with stainless steel suction strainer Product Description: Suction hose, transparent with integrated rigid PVC spiral - kink and abrasion resistant - non-return valve prevents backflow of water for quick suction and delivery after interruption - suction strainer with lug for attaching a floating ball - for garden pumps and domestic waterworks/automatic pumps - hose connection 25.4 (1″) mm Technical Data: - Bending radius: 110mm - Physical state: LiquidFor commercial use, please observe the building regulations!
€74,20
-
KNIPEX KNIPEX wire end ferrule assortment 1252 pieces 0.50 - 10.00 mm² ( 8000653625 )
Sat, 10/18/2025
Scope of Delivery: - Wire end ferrule assortment 1252 pieces 0.50 - 10.00 mm² Product Description: for wire end ferrules in mini-systainer, 2 stackable plastic inserts with 6 trays each for connectors - with an assortment of wire end ferrules with and without plastic collar Contents: Part no. 8000 653 625: 200 pcs. each Wire end ferrules with plastic collar 0.5 / 0.75 / 1.0 / 1.5 / 2.5 mm² per 100 pcs. Wire end ferrules with plastic collar 4.0 / 6.0 mm² per 50 pcs. Wire end ferrules with plastic collar 10.0 mm² 1 pc. self-adjusting crimping pliers for wire end ferrules with front entry 0.08 - 10 + 16 mm² (4000 810 442) 1 pc. Automatic wire stripper 195 mm, 0.03 - 10.0 mm² (4000 810 428) Technical Data: - Packaging: in systainer - suitable for: for wire end ferrulesFor commercial use, please observe the building regulations!
€413,86
-
KNIPEX KNIPEX crimping set 97 90 16 With crimping pliers and wire strippers ( 8000653624 )
Sat, 10/18/2025
Scope of Delivery: - Crimping set 97 90 16 With crimping pliers and wire strippers Product Description: for wire end ferrules in mini-systainer, 2 stackable plastic inserts with 6 trays each for connectors - with an assortment of wire end ferrules with and without plastic collar Contents: 200 pcs. each Wire end ferrules with plastic collar, 14 / 8 mm, 0.5 / 0.75 / 1.0 / 1.5 and 2.5 mm² 100 pcs. Wire end ferrules with plastic collar, 17 / 10 mm, 4 mm² 100 pcs. Wire end ferrules with plastic collar, 20 / 12 mm, 6 mm² 50 pcs. Wire end ferrules with plastic collar, 22 / 12 mm, 10 mm² 1 pc. self-adjusting wire stripper 0.03 - 10.0 mm² (4000 810 426) 1 pc. self-adjusting crimping pliers for wire end ferrules with front entry 0.08 - 10 + 16 mm² (4000 810 442) Technical Data: - Packaging: in systainer - suitable for: for wire end ferrulesFor commercial use, please observe the building regulations!
€398,25
-
HETTICH HETTICH metal plinth adjustment tool ( 8000609029 )
Sat, 10/18/2025
Scope of Delivery: - Metal plinth adjustment tool Product Description: Metal - for adjusting plinth foot Correct (art. no. 8000 610 099 ff.) - Manual operation - Adjustable up to 300 kg carcase weight (carcase + load) - Total length 1000 mm Technical Data: - Load capacity: up to 300kgFor commercial use, please observe the building regulations!
€60,18
-
HETTICH HETTICH nickel-plated steel cross mounting plate ( 8000608912 )
Sat, 10/18/2025
Scope of Delivery: - Cross mounting plate nickel-plated steel Product Description: Cross mounting plate with direct height adjustment - for Sensys and Intermat hinges - row of holes 37 x 32 mm Technical Data: - nanFor commercial use, please observe the building regulations!
€9,09
-
HETTICH HETTICH nickel-plated steel cross mounting plate ( 8000608911 )
Sat, 10/18/2025
Scope of Delivery: - Cross mounting plate nickel-plated steel Product Description: Cross mounting plate with direct height adjustment - for Sensys and Intermat hinges - row of holes 37 x 32 mm Technical Data: - nanFor commercial use, please observe the building regulations!
€9,09
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"