Neueste Artikel
-
KUKKO KUKKO nut splitter M18 - M24 ( 4157540003 )
Scope of Delivery: - Nut splitter M18 - M24 Product Description: Mechanical - for cracking tight or overtightened nuts without damaging the threaded bolt The dimensions for nuts are the spanner width! Technical Data: - Weight: 0.66kgFor commercial use, please observe the building regulations!
-
KUKKO KUKKO nut splitter M12 - M18 ( 4157540002 )
Scope of Delivery: - Nut splitter M12 - M18 Product Description: Mechanical - for cracking tight or overtightened nuts without damaging the threaded bolt The dimensions for nuts are the spanner width! Technical Data: - Weight: 0.435kgFor commercial use, please observe the building regulations!
-
KUKKO KUKKO nut splitter M2 - M6 ( 4157540000 )
Thu, 10/09/2025
Scope of Delivery: - Nut splitter M2 - M6 Product Description: Mechanical - for cracking tight or overtightened nuts without damaging the threaded bolt The dimensions for nuts are the spanner width! Technical Data: - Weight: 0.1kgFor commercial use, please observe the building regulations!
€68,37
-
KUKKO KUKKO stud extractor 53-12 suitable for stud Ø 12 mm ( 4157523012 )
Thu, 10/09/2025
Scope of Delivery: - Stud extractor 53-12 suitable for stud Ø 12 mm Product Description: for screwing in/unscrewing stud bolts - clamping of stud bolts by three eccentrically arranged rollers in the tool body - stud bolt turning body made of steel - with 1/2 internal square and 21 mm external hexagon - external attachment for left and right actuation by ratchet or spanner (not included in scope of delivery) - application: for damage-free screwing in and out of stud bolts Technical Data: - Length: 71mm - Body-Ø: 28mm - weight: 340g - square drive mm: 12,5mmFor commercial use, please observe the building regulations!
€68,21
-
KUKKO KUKKO stud extractor 53-8 suitable for stud Ø 8 mm ( 4157523008 )
Thu, 10/09/2025
Scope of Delivery: - Stud extractor 53-8 suitable for stud Ø 8 mm Product Description: for screwing in/unscrewing stud bolts - clamping of stud bolts by three eccentrically arranged rollers in the tool body - stud bolt turning body made of steel - with 1/2 internal square and 21 mm external hexagon - external attachment for left and right actuation by ratchet or spanner (not included in scope of delivery) - application: for damage-free screwing in and out of stud bolts Technical Data: - Length: 60mm - Body-Ø: 25mm - weight: 155g - square drive mm: 12,5mmFor commercial use, please observe the building regulations!
€70,24
-
KUKKO KUKKO stud extractor 53-6 suitable for stud Ø 6 mm ( 4157523006 )
Scope of Delivery: - Stud extractor 53-6 suitable for stud Ø 6 mm Product Description: for screwing in/unscrewing stud bolts - clamping of stud bolts by three eccentrically arranged rollers in the tool body - stud bolt turning body made of steel - with 1/2 internal square and 21 mm external hexagon - external attachment for left and right actuation by ratchet or spanner (not included in scope of delivery) - application: for damage-free screwing in and out of stud bolts Technical Data: - Length: 65mm - Body-Ø: 25mm - weight: 120g - square drive mm: 12,5mmFor commercial use, please observe the building regulations!
-
KUKKO KUKKO separating device set 15-B nominal size 2 ( 4157503203 )
Thu, 10/09/2025
Scope of Delivery: - Separating device set 15-B nominal size 2 - Supplied in a case Product Description: Complete set - with separating device, extractor and extension Application: for extracting ball bearings, roller bearings, inner rings and other flush-fitting parts Technical Data: - Packaging: L-BoxxFor commercial use, please observe the building regulations!
€403,84
-
KUKKO KUKKO honing tool 204-0 Clamping depth 70 mm ( 4157500004 )
Thu, 10/09/2025
Scope of Delivery: - Honing tool 204-0 Clamping depth 70 mm Product Description: with lateral clamping clamp - indispensable for pulling off flush-fitting ball bearings, bearing rings and similar parts in precision mechanics, electrical workshops, air pressure maintenance, etc. - the claws of the puller hooks grip under the part to be tightened when the clamp is tightened and release it before the actual pulling process begins Technical Data: - Weight: 0.69 kg - Design: lateral clamping clampFor commercial use, please observe the building regulations!
€113,80
-
KUKKO KUKKO separator 15 opening A 30 - 250 mm ( 4157490015 )
Scope of Delivery: - Separator 15 Opening A 30 - 250 mm Product Description: Application: for extracting ball bearings, roller bearings, inner rings and other flush-fitting parts - the sharp cutting edges enable flush-fitting parts to be extracted where 2- and 3-arm extractors cannot be used (Fig. 1) - the jaws are clamped by evenly pulling the nuts onto the side bolts Working method: pulling is performed by tightening the spindle against the shaft end (Fig. 2 and 3), hydraulic operation is also possible with the larger pullers Working method with hydraulics (Fig. 4): (hydraulics are not included in the scope of delivery) use the spanner (b) to screw the spindle of the hydraulics into the thread of the crossbar of the puller - until the pressure piece presses firmly against the shaft, then activate the hydraulics by turning the upper spindle (a) - Attention: Figures 2 and 3 show the separator in combination with the puller Art.No. 4157 490 000, 4157 490 001, 4157 490 002, 4157 490 003 (not included in the scope of delivery) Figure 4 shows the separator in combination with the puller Art. no. 4157 490 000, 4157 490 001, 4157 490 002, 4157 490 003 and a hydraulic spindle (puller and hydraulic spindle are not included in the scope of delivery) Please request the hydraulic spindle separately. Technical Data: - Weight: 20.05 kgFor commercial use, please observe the building regulations!
-
KUKKO KUKKO separator 15 opening A 22 - 115 mm ( 4157490012 )
Thu, 10/09/2025
Scope of Delivery: - Separator 15 Opening A 22 - 115 mm Product Description: Application: for extracting ball bearings, roller bearings, inner rings and other flush-fitting parts - the sharp cutting edges enable flush-fitting parts to be extracted where 2- and 3-arm extractors cannot be used (Fig. 1) - the jaws are clamped by evenly pulling the nuts onto the side bolts Working method: pulling is performed by tightening the spindle against the shaft end (Fig. 2 and 3), hydraulic operation is also possible with the larger pullers Working method with hydraulics (Fig. 4): (hydraulics are not included in the scope of delivery) use the spanner (b) to screw the spindle of the hydraulics into the thread of the crossbar of the puller - until the pressure piece presses firmly against the shaft, then activate the hydraulics by turning the upper spindle (a) - Attention: Figures 2 and 3 show the separator in combination with the puller Art.No. 4157 490 000, 4157 490 001, 4157 490 002, 4157 490 003 (not included in the scope of delivery) Figure 4 shows the separator in combination with the puller Art. no. 4157 490 000, 4157 490 001, 4157 490 002, 4157 490 003 and a hydraulic spindle (puller and hydraulic spindle are not included in the scope of delivery) Please request the hydraulic spindle separately. Technical Data: - Weight: 2.9 kgFor commercial use, please observe the building regulations!
€150,25
-
BROCKHAUS BROCKHAUS vice protection jaw for jaw width 160 mm ( 4157120660 )
Thu, 10/09/2025
Scope of Delivery: - Vice protection jaw for jaw width 160 mm - PU = 1 pair Product Description: made of polyurethane - for clamping sensitive workpieces - with extremely powerful neodymium flat magnet, which is firmly pressed into the jaw and does not come loose even after prolonged use - the magnetism does not penetrate to the front clamping surface - suitable for all vice types - Special product benefits: The jaws are made of polyurethane. This very elastic, resistant and ageing-resistant material returns to its original shape after being deformed by pressure. Type PP (polyurethane prisms): Clamping of delicate round and oval workpieces. The workpieces are held securely by the incorporated prisms in different sizes Type PR (polyurethane ripples): Clamping of sensitive workpieces of all kinds. The ribbing grips the surface of the workpieces without damaging them Technical Data: - nanFor commercial use, please observe the building regulations!
€47,19
-
BROCKHAUS BROCKHAUS vice protection jaw for jaw width 120 mm ( 4157120620 )
Thu, 10/09/2025
Scope of Delivery: - Vice protection jaw for jaw width 120 mm - PU = 1 pair Product Description: made of polyurethane - for clamping sensitive workpieces - with extremely powerful neodymium flat magnet, which is firmly pressed into the jaw and does not come loose even after prolonged use - the magnetism does not penetrate to the front clamping surface - suitable for all vice types - Special product benefits: The jaws are made of polyurethane. This very elastic, resistant and ageing-resistant material returns to its original shape after being deformed by pressure. Type PP (polyurethane prisms): Clamping of delicate round and oval workpieces. The workpieces are held securely by the incorporated prisms in different sizes Type PR (polyurethane ripples): Clamping of sensitive workpieces of all kinds. The ribbing grips the surface of the workpieces without damaging them Technical Data: - nanFor commercial use, please observe the building regulations!
€43,85
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"