Screwdrivers & Drill Drivers

Show previous products

• Pre-loved Manufacturer-tested

  Options

  Bosch Professional Bosch GSR 18V-150 C Professional cordless drill driver 18 V 150 Nm Brushless Solo ( 06019J5001 ) - without battery, without charger

  Scope of Delivery: - 1x Bosch GSR 18V-150 C Professional cordless drill driver 18 V - 1x additional handle ( 1 602 025 07Y ) - without battery, without charger Product Description: The Bosch GSR 18V-150 C Professional cordless drill driver impresses with its 150 Newton metres of torque paired with Biturbo technology. It also features precise Electronic Angle Detection, which always ensures the correct angle for long screws. The KickBack Control is also installed. The robust metal drill chuck and metal gearbox promise a long service life and a lot of enjoyment during use. The Bosch Connectivity Module (not included) is also compatible. The GSR 18V-150 C Professional delivers optimum results when screwing and drilling in wood and metal, especially when drilling large diameters, e.g. hole saws up to 150 mm. Naturally, an LED light is installed. One of the machine's highlights is the three torque settings. These are 84 Nm in soft mode, 100 Nm in hard mode and 150 Nm in the maximum range. Important to know: Biturbo devices must be operated with ProCore batteries from 5.5 amps. With smaller batteries, the performance of the device is licenced. Bosch Professional is a leading manufacturer of power tools of all kinds, characterised by its long tradition and high quality workmanship. Technical Data: - Manufacturer: Bosch - Manufacturer's description: GSR 18V-150 C - Manufacturer number: 06019J5001 - Torque (max.): 150 Nm - Torque (soft/hard/max.): 84/100/150 Nm - Idle speed (1st gear / 2nd gear): 0 - 550 / 0 - 2,200 min-1 - Battery type: Lithium-ion - Drill chuck clamping range, min./max.: 1.5 / 13 mm - Battery voltage: 18 V - Torque levels: 25+1 - Screw diameter - Screw Ø, max.: 13 mm - Drill Ø wood, max.: 150 mm - Drill Ø steel, max.: 16 mm - Vibration emission value ah: 1.5 m/s² - Uncertainty K: 2.5 m/s² - Sound pressure level: 81 dB(A) - Sound power level: 92 dB(A) - Uncertainty K: 5 dB - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €150,87

  Options

• 

  Bosch Professional Bosch GSR 18V-65 Professional Akku Bohrschrauber 18 V 63 Nm Brushless + 2x Akku 4,0 Ah + Ladegerät + L-Boxx

  Thu, 11/20/2025

  Scope of Delivery: Product Description: Technical Data: For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €318,72

• 

  Bosch Professional Bosch GSR 18V-45 Professional Akku Bohrschrauber 18 V 45 Nm Brushless + 1x Akku 5,0 Ah - ohne Ladegerät

  Thu, 11/20/2025

  Scope of Delivery: Product Description: Technical Data: For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €201,91

• Sale -€35,10

  Bosch Professional Bosch GSR 18V-45 Professional Akku Bohrschrauber 18 V 45 Nm ( 06019K3200 ) Brushless Solo - ohne Akku, ohne Ladegerät

  Thu, 11/20/2025

  Scope of Delivery: Product Description: Technical Data: For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €132,09 €96,99

• 

  Bosch Professional Bosch GSR 18V-65 Professional Akku Bohrschrauber 18 V 63 Nm ( 06019N3203 ) Brushless + 2x Akku 5,0 Ah + Ladegerät + L-Boxx

  Thu, 11/20/2025

  Scope of Delivery: Product Description: Technical Data: For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €289,07

• 

  Bosch Professional Bosch GSR 18V-65 Professional Akku Bohrschrauber 18 V 63 Nm ( 06019N3208 ) Brushless + 3x ProCORE Akku 4,0 Ah + Ladegerät + L-Boxx

  Thu, 11/20/2025

  Scope of Delivery: Product Description: Technical Data: For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €324,12

• 

  Makita Makita DHP 490 SF1J cordless impact drill 18 V 65 Nm brushless + 1x battery 3.0 Ah + charger + Makpac

  Thu, 11/20/2025

  Scope of Delivery: - 1x Makita DHP 490 cordless impact drill - 1x Makita BL 1830 B 18 V 3.0 Ah battery - 1x Makita DC 18 SD battery charger - 1x Makita Makpac system case - 1x universal insert Product Description: The Makita DHP 490 cordless impact drill is a powerful and versatile machine that is suitable for both screwdriving and drilling work with and without impact function. With a maximum torque of 50 Nm (hard) and 27 Nm (soft), the device offers enough power for a wide range of applications. Equipped with a mechanical 2-speed gearbox, the DHP 490 enables fast drilling in light materials in high-speed mode as well as precise work requiring high torque in low-speed mode. The torque can be finely adjusted in 20 stages between approximately 1 and 5 Nm, allowing the user to tailor the power precisely to their needs. The impact drill is equipped with dual LED lighting that illuminates the work area well, even in dark or poorly lit environments, to ensure high precision in all tasks. Another highlight is the Makita XPT system, which effectively protects the machine from water and dust, ensuring reliable operation even under difficult conditions. The ergonomically designed handle ensures maximum comfort, even during prolonged use, and the conveniently located reverse switch makes operation easier by allowing quick switching between forward and reverse rotation. The built-in battery protection circuit protects the device from overload, overheating and over-discharge, thus contributing to the machine's longevity. A quick-release drill chuck allows for easy accessory changes and ensures that the drill driver is ready for use in no time. The integrated LED light with pre- and post-lighting functions provides optimum illumination of the work area, increasing efficiency when working in dark environments. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DHP 490 ZJ - Battery voltage: 18 V - Battery series LXT: Yes - Battery type (Ni-MH/Li-Ion): Li-ion - Brushless motor: Yes - No-load speed: 0 - 500 / 1900 rpm - Max. torque hard / soft: 50 / 27 Nm - Max. torque: 65 Nm - Torque settings: 20 - Impact rate: 0 - 7500 / 28500 rpm - Max. drilling capacity in wood: 38 mm - Max. drilling capacity in masonry: 13 mm - Max. drilling capacity in steel: 13 mm - Max. drilling capacity in wood (auger bit): 38 mm - Max. drilling capacity in wood (self-tapping drill): 38 mm - Drilling capacity with flat milling cutters: 40 mm - Drilling capacity with hole saws: 51 mm - Mounting shank: 1/2"-20UNF - Chuck capacity: 1.5 - 13 mm - Electronic brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value) drilling in metal: 1.5 m/s² - Vibration values, hammer drilling in concrete: 8.1 m/s² - Vibration uncertainty factor (K value) impact drilling in concrete: 1.5 m/s² - Sound power level (dB): 96 dB(A) - Sound pressure level (dB): 88 dB(A) - K value noise: 3 dB(A) - Product dimensions (L x W x H): 172 x 81 x 255 mm - Weight with battery: 1.4 - 1.7 kg - Weight without battery: 1.0 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €205,18

• 

  Makita Makita DDF 490 SF1 cordless drill driver 18 V 65 Nm 1/2" brushless + 1x battery 3.0 Ah + charger

  Thu, 11/20/2025

  Scope of Delivery: - 1x Makita DDF 490 Z cordless drill driver - 1x Makita BL 1830 B 18 V 3.0 Ah battery - 1x Makita DC 18 SD battery charger Product Description: The Makita DDF 490 cordless drill/driver offers the perfect combination of power, compactness and handling. Equipped with a brushless motor, this model delivers a maximum torque of 65 Nm, making it ideal for demanding drilling and screwdriving tasks. The mechanical 2-speed gearbox allows precise speed adjustment, making it suitable for a wide range of applications in different materials. Stepless speed control via the trigger also ensures precise control during use. The cordless drill/driver is equipped with a quick-release drill chuck that allows bits to be changed quickly, which significantly speeds up the work process. Thanks to eXtreme Protection Technology (XPT), the DDF 490 is well protected against dust and water, ensuring reliable operation even under extreme conditions. The right/left switch has been ergonomically and conveniently positioned for easy operation. An integrated LED light with pre- and post-glow function ensures that the work area is well lit even in poor lighting conditions, enabling precise work. The electric brake not only contributes to user safety, but also ensures that work can be resumed quickly, thus maximising productivity. In addition, the DDF 490 is equipped with a battery protection system that automatically cuts off the power supply when the battery level becomes too low, extending the battery life and preventing unexpected interruptions to work. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DDF 490 - Battery voltage: 18 V - Battery system LXT: Yes - Battery type (Ni-Cd / Ni-MH / Li-ion): Li-ion - Brushless motor: Yes - No-load speed: 0 - 500 / 0 - 1900 min⁻¹ - Max. torque hard/soft: 50 / 27 Nm - Max. torque: 65 Nm - Torque setting: 20 - Max. drilling capacity in wood: 38 mm - Max. drilling capacity in steel: 13 mm - Mounting: 1/2"-20UNF - Drill chuck capacity: 1.5 - 13 mm - Drilling capacity in wood (self-feeding drill): 38 mm - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty (K value), drilling in metal: 1.5 m/s² - Sound pressure level (LpA): 78 dB(A) - K value noise: 3 dB(A) - Product dimensions (L x W x H): 167 x 81 x 255 mm - Weight including battery: 1.4 - 1.7 kg - Net product weight: 1.0 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €179,93

• 

  Makita Makita DHP 490 RF1 cordless impact drill 18 V 65 Nm brushless + 1x battery 3.0 Ah + charger

  Thu, 11/20/2025

  Scope of Delivery: - 1x Makita DHP 490 cordless impact drill - 1x Makita BL 1830 B 18 V 3.0 Ah battery - 1x Makita DC 18 RC battery quick charger Product Description: The Makita DHP 490 cordless impact drill is a powerful and versatile machine that is suitable for both screwdriving and drilling work with and without impact function. With a maximum torque of 50 Nm (hard) and 27 Nm (soft), the device offers enough power for a wide range of applications. Equipped with a mechanical 2-speed gearbox, the DHP 490 enables fast drilling in light materials in high-speed mode as well as precise work requiring high torque in low-speed mode. The torque can be finely adjusted in 20 stages between approximately 1 and 5 Nm, allowing the user to tailor the power precisely to their needs. The impact drill is equipped with dual LED lighting that illuminates the work area well, even in dark or poorly lit environments, to ensure high precision in all tasks. Another highlight is the Makita XPT system, which effectively protects the machine from water and dust, ensuring reliable operation even under difficult conditions. The ergonomically designed handle ensures maximum comfort, even during prolonged use, and the conveniently located reverse switch makes operation easier by allowing quick switching between forward and reverse rotation. The built-in battery protection circuit protects the device from overload, overheating and over-discharge, thus contributing to the machine's longevity. A quick-release drill chuck allows for easy accessory changes and ensures that the drill driver is ready for use in no time. The integrated LED light with pre- and post-lighting functions provides optimum illumination of the work area, increasing efficiency when working in dark environments. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DHP 490 - Battery voltage: 18 V - Battery series LXT: Yes - Battery type (Ni-MH/Li-Ion): Li-ion - Brushless motor: Yes - No-load speed: 0 - 500 / 1900 rpm - Max. torque hard / soft: 50 / 27 Nm - Max. torque: 65 Nm - Torque settings: 20 - Impact rate: 0 - 7500 / 28500 rpm - Max. drilling capacity in wood: 38 mm - Max. drilling capacity in masonry: 13 mm - Max. drilling capacity in steel: 13 mm - Max. drilling capacity in wood (auger bit): 38 mm - Max. drilling capacity in wood (self-tapping drill): 38 mm - Drilling capacity with flat milling cutters: 40 mm - Drilling capacity with hole saws: 51 mm - Mounting shank: 1/2"-20UNF - Chuck capacity: 1.5 - 13 mm - Electronic brake: Yes - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty factor (K value) drilling in metal: 1.5 m/s² - Vibration values, hammer drilling in concrete: 8.1 m/s² - Vibration uncertainty factor (K value) for hammer drilling in concrete: 1.5 m/s² - Sound power level (dB): 96 dB(A) - Sound pressure level (dB): 88 dB(A) - K value noise: 3 dB(A) - Product dimensions (L x W x H): 172 x 81 x 255 mm - Weight with battery: 1.4 - 1.7 kg - Weight without battery: 1.0 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €191,23

• 

  Makita Makita DDF 490 G1J cordless drill driver 18 V 65 Nm 1/2" brushless + 1x 6.0 Ah battery + Makpac - without charger

  Thu, 11/20/2025

  Scope of Delivery: - 1x Makita DDF 490 cordless drill driver - 1x Makita BL 1860 B 18 V 6.0 Ah battery - 1x Makita Makpac system case - 1x universal insert - without charger Product Description: The Makita DDF 490 cordless drill/driver offers the perfect combination of power, compactness and handling. Equipped with a brushless motor, this model delivers a maximum torque of 65 Nm, making it ideal for demanding drilling and screwdriving tasks. The mechanical 2-speed gearbox allows precise speed adjustment, making it suitable for a wide range of applications in different materials. Stepless speed control via the trigger also ensures precise control during use. The cordless drill/driver is equipped with a quick-release drill chuck that allows bits to be changed quickly, which significantly speeds up the work process. Thanks to eXtreme Protection Technology (XPT), the DDF 490 is well protected against dust and water, ensuring reliable operation even under extreme conditions. The right/left switch has been ergonomically and conveniently positioned for easy operation. An integrated LED light with pre- and post-glow function ensures that the work area is well lit even in poor lighting conditions, enabling precise work. The electric brake not only contributes to user safety, but also ensures that work can be resumed quickly, thus maximising productivity. In addition, the DDF 490 is equipped with a battery protection system that automatically cuts off the power supply when the battery level becomes too low, extending the battery life and preventing unexpected interruptions to work. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DDF 490 ZJ - Battery voltage: 18 V - Battery system LXT: Yes - Battery type (Ni-Cd / Ni-MH / Li-ion): Li-ion - Brushless motor: Yes - No-load speed: 0 - 500 / 0 - 1900 min⁻¹ - Max. torque hard/soft: 50 / 27 Nm - Max. torque: 65 Nm - Torque setting: 20 - Max. drilling capacity in wood: 38 mm - Max. drilling capacity in steel: 13 mm - Mounting: 1/2"-20UNF - Drill chuck capacity: 1.5 - 13 mm - Drilling capacity in wood (self-feeding drill): 38 mm - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty (K value), drilling in metal: 1.5 m/s² - Sound pressure level (LpA): 78 dB(A) - K value noise: 3 dB(A) - Product dimensions (L x W x H): 167 x 81 x 255 mm - Weight including battery: 1.4 - 1.7 kg - Net product weight: 1.0 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €237,97

• 

  Makita Makita DDF 490 F1J cordless drill driver 18 V 65 Nm 1/2" brushless + 1x battery 3.0 Ah + Makpac - without charger

  Thu, 11/20/2025

  Scope of Delivery: - 1x Makita DDF 490 cordless drill driver - 1x Makita BL 1830 B 18 V 3.0 Ah battery - 1x Makita Makpac system case - 1x universal insert - without charger Product Description: The Makita DDF 490 cordless drill/driver offers the perfect combination of power, compactness and handling. Equipped with a brushless motor, this model delivers a maximum torque of 65 Nm, making it ideal for demanding drilling and screwdriving tasks. The mechanical 2-speed gearbox allows precise speed adjustment, making it suitable for a wide range of applications in different materials. Stepless speed control via the trigger also ensures precise control during use. The cordless drill/driver is equipped with a quick-release drill chuck that allows bits to be changed quickly, which significantly speeds up the work process. Thanks to eXtreme Protection Technology (XPT), the DDF 490 is well protected against dust and water, ensuring reliable operation even under extreme conditions. The right/left switch has been ergonomically and conveniently positioned for easy operation. An integrated LED light with pre- and post-glow function ensures that the work area is well lit even in poor lighting conditions, enabling precise work. The electric brake not only contributes to user safety, but also ensures that work can be resumed quickly, thus maximising productivity. In addition, the DDF 490 is equipped with a battery protection system that automatically cuts off the power supply when the battery level becomes too low, extending the battery life and preventing unexpected interruptions to work. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DDF 490 ZJ - Battery voltage: 18 V - Battery system LXT: Yes - Battery type (Ni-Cd / Ni-MH / Li-ion): Li-ion - Brushless motor: Yes - No-load speed: 0 - 500 / 0 - 1900 min⁻¹ - Max. torque hard/soft: 50 / 27 Nm - Max. torque: 65 Nm - Torque setting: 20 - Max. drilling capacity in wood: 38 mm - Max. drilling capacity in steel: 13 mm - Mounting: 1/2"-20UNF - Drill chuck capacity: 1.5 - 13 mm - Drilling capacity in wood (self-feeding drill): 38 mm - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty (K value), drilling in metal: 1.5 m/s² - Sound pressure level (LpA): 78 dB(A) - K value noise: 3 dB(A) - Product dimensions (L x W x H): 167 x 81 x 255 mm - Weight including battery: 1.4 - 1.7 kg - Net product weight: 1.0 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €185,53

• 

  Makita Makita DDF 490 RGJ cordless drill driver 18 V 65 Nm 1/2" brushless + 2x 6.0 Ah batteries + charger + Makpac

  Thu, 11/20/2025

  Scope of Delivery: - 1x Makita DDF 490 cordless drill driver - 2x Makita BL 1860 B 18 V 6.0 Ah battery - 1x Makita DC 18 RC cordless quick charger - 1x Makita Makpac system case - 1x universal insert Product Description: The Makita DDF 490 cordless drill/driver offers the perfect combination of power, compactness and handling. Equipped with a brushless motor, this model delivers a maximum torque of 65 Nm, making it ideal for demanding drilling and screwdriving tasks. The mechanical 2-speed gearbox allows precise speed adjustment, making it suitable for a wide range of applications in different materials. Stepless speed control via the trigger also ensures precise control during use. The cordless drill/driver is equipped with a quick-release drill chuck that allows bits to be changed quickly, which significantly speeds up the work process. Thanks to eXtreme Protection Technology (XPT), the DDF 490 is well protected against dust and water, ensuring reliable operation even under extreme conditions. The right/left switch has been ergonomically and conveniently positioned for easy operation. An integrated LED light with pre- and post-glow function ensures that the work area is well lit even in poor lighting conditions, enabling precise work. The electric brake not only contributes to user safety, but also ensures that work can be resumed quickly, thus maximising productivity. In addition, the DDF 490 is equipped with a battery protection system that automatically cuts off the power supply when the battery level becomes too low, extending the battery life and preventing unexpected interruptions to work. Technical Data: - Manufacturer: Makita - Manufacturer's designation: DDF 490 ZJ - Battery voltage: 18 V - Battery system LXT: Yes - Battery type (Ni-Cd / Ni-MH / Li-ion): Li-ion - Brushless motor: Yes - No-load speed: 0 - 500 / 0 - 1900 min⁻¹ - Max. torque hard/soft: 50 / 27 Nm - Max. torque: 65 Nm - Torque setting: 20 - Max. drilling capacity in wood: 38 mm - Max. drilling capacity in steel: 13 mm - Mounting: 1/2"-20UNF - Drill chuck capacity: 1.5 - 13 mm - Drilling capacity in wood (self-feeding drill): 38 mm - Vibration values, drilling in metal: ≤ 2.5 m/s² - Vibration uncertainty (K value), drilling in metal: 1.5 m/s² - Sound pressure level (LpA): 78 dB(A) - K value noise: 3 dB(A) - Product dimensions (L x W x H): 167 x 81 x 255 mm - Weight including battery: 1.4 - 1.7 kg - Net product weight: 1.0 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €372,33

Show more products