Soudal

Scope of Delivery: - 1C PU adhesive SOUDABOND EASY orange Product Description: Ready-to-use polyurethane adhesive - also suitable for vertical bonding - for bonding insulation boards based on polystyrene (EPS + XPS), polyurethane (PUR/PIR) and phenolic resin rigid foam for flat roofs, perimeters, façades, insulation/drainage elements, basement ceilings, interior insulation, etc. - Bonding of plasterboard/gypsum fibreboards in drywall construction, non-load-bearing interior walls such as partition walls, counters, stone shelves, etc. Plasterable connecting foils around windows and façades - Filling of cavities between thermal insulation elements - Fast curing, can be further processed after approx. 1 hour - building material class B1 (flame-retardant) in accordance with DIN 4102 Part 1 - rot-proof, resistant to ageing, mould and rot, not UV-resistant - waterproof (not watertight) - solvent- and silicone-free Attention: Protective gloves (e.g. item no. 4000 371 022) must also be worn when supplying to private end users.No. 4000 371 022) must be enclosed. The article is supplied by the industry without protective gloves, as it is categorised as a purely commercial product. Disposal instructions: Used PU foam cans are hazardous waste and therefore do not belong in the residual waste, yellow bag, construction waste or tinplate container. Individual cans should be handed in at the municipal hazardous waste collection centre (www.pdr.de/plz-suche), from 6 cartons upwards, a free collection can be requested from PDR Recycling GmbH + Co KG. Phone: 0800 7836736. Further information can be found at www.pdr.de. Technical Data: - Curing time: approx. 30 min./30 mm adhesive strand - Chemical base: Polyurethane - Processing temperature: not below +5°C - Temperature resistance: -40 to +90°CFor commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 12x 1C assembly foam SOUDAFOAM 500 ml Product Description: 1-component polyurethane foam for insulating, insulating, filling and bonding in construction and industrial applications such as filling pipe penetrations, masonry openings, roof extensions and cavities of all kinds - building material class B2 - silicone-free Disposal instructions: Used PU foam cans are hazardous waste and therefore do not belong in the residual waste, yellow bag, construction waste or tinplate container. Individual cans should be handed in at the municipal hazardous waste collection centre (www.pdr.de/plz-suche), from 6 cartons upwards, a free collection can be requested from PDR Recycling GmbH + Co KG. Phone: 0800 7836736. Further information can be found at www.pdr.de. Technical Data: - Shelf life: 18 months - Colour: champagne - Chemical base: Polyurethane - Processing temperature: +5 to +35°C - Temperature range: -40 to +90°C - Container: tin - PU: 12For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1C assembly foam SOUDAFOAM 750 ml Product Description: 1-component polyurethane foam for insulating, insulating, filling and bonding in construction and industrial applications such as filling pipe penetrations, masonry openings, roof extensions and cavities of all kinds - building material class B2 - silicone-free Disposal note: Used PU foam cans are hazardous waste and therefore do not belong in residual waste, yellow sacks, construction waste or tinplate containers. Individual cans should be handed in at the municipal hazardous waste collection centre (www.pdr.de/plz-suche), from 6 cartons upwards, a free collection can be requested from PDR Recycling GmbH + Co KG. Phone: 0800 7836736. Further information can be found at www.pdr.de. Technical Data: - Shelf life: 18 months - Colour: champagne - Chemical base: Polyurethane - Processing temperature: +5 to +35°C - Temperature range: -40 to +90°C - Container: tinFor commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1K hybrid polymer Fix All HT white Product Description: flexible adhesive based on hybrid polymer - for high-performance bonding of all types, e.g. door frames, window sills, boards, panels, skirting boards, decorative mouldings, wooden constructions and insulation materials - for dynamically stressed, structural bonding, where a high initial adhesive strength is required - for all types of material and on all standard substrates - high initial adhesion with exceptional final adhesive strength (320kg/10cm²) - universally applicable adhesive and sealant - suitable under all (weather) conditions and on all substrates and materials (even when damp) - permanently elastic - can be painted over directly - for indoors and outdoors - evens out unevenness - weather, ageing and UV-resistant and UV-resistant - solvent-free - very low-emission EC1+ / for a healthy indoor climate - silicone-free Technical Data: - Curing time: approx. 3 mm/24 hrs. - Chemical base: Hybrid polymer - Processing temperature: 0 to +35°C - Temperature resistance: -40 to +90°CFor commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - Sanitary silicone Silirub S grey Product Description: acetate-curing, permanently elastic silicone sealant for floor and connection joints in sanitary facilities and damp rooms - for glass sealing and jointing work, joints in bathrooms and kitchens, sealing in cold rooms and container construction as well as sealing in air conditioning systems - very easy to apply - UV-resistant - insensitive to mould - very good adhesion to many materials - temperature resistance -60 °C to +120 °C Technical Data: - Container: CartridgeFor commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 2-component door frame foam SOUDAFOAM 400 ml Product Description: 2-component polyurethane rapid foam - particularly suitable for quick and safe installation of door frames and window elements in accordance with GEG DIN 4108 and RAL installation guidelines as well as for setting bathtub and shower tray supports - building material class B2 - very low emission EC1+ - silicone-free Disposal instructions: Used PU foam cans are hazardous waste and therefore do not belong in residual waste, yellow bags, construction waste or tinplate containers. Individual cans should be handed in at the municipal hazardous waste collection centre (www.pdr.de/plz-suche), from 6 cartons upwards, a free collection can be requested from PDR Recycling GmbH + Co KG. Phone: 0800 7836736. Further information can be found at www.pdr.de. Technical Data: - Shelf life: 18 months - Chemical Basis: Polyurethane - Processing temperature: +5 to +35°C - Temperature range: -40 to +90°C - Container: CanFor commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - Sanitary silicone Silirub S transparent Product Description: acetate-curing, permanently elastic silicone sealant for floor and connection joints in sanitary facilities and damp rooms - for glass sealing and jointing work, joints in bathrooms and kitchens, sealing in cold rooms and container construction as well as sealing in air conditioning systems - very easy to apply - UV-resistant - insensitive to mould - very good adhesion to many materials - temperature resistance -60 °C to +120 °C Technical Data: - Container: CartridgeFor commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 12x Acrylic Acryrub SWS 310 ml Product Description: High-quality, elastic, single-component sealant based on silanised acrylate dispersion - Building material class B2 (DIN 4102 Part 4) - For permanent, airtight interior sealing of connecting joints between masonry and door or window frames - For joints and cracks in masonry, concrete and plaster in interior areas for joints and cracks in masonry, concrete and plaster indoors - for internal sealing on window sills, roller shutter boxes, between skirting boards and floors - very good adhesion to many porous materials, rigid PVC and aluminium - virtually odourless - elastic after curing, complies with ISO 11600 F-12.5E - very low emissions - EC1 PLUS licensed - temperature resistance -20 °C to +80 °C - part of the SOUDAL WINDOW SYSTEM (SWS) - silicone-free Technical Data: - Content: 310ml - Temperature resistance: -20 to +80°C - Processing temperature: +5 to +40°C - Container: Cartridge - PU: 12For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x SOUDAL plastic adapter tube Product Description: for processing PU assembly foam - not suitable for cans with 2 in 1 adapter Technical Data: - Material: Plastic - Contents: 5 pcs. - Container: Bag - Suitable for: Assembly foams (not suitable for cans with 2 in 1 adapter) - Brand: SOUDALFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less