Only this week: 10% off all BOSCH power tools - discount will be deducted in the shopping cart

Description

SKU: 21402
EAN: 4014549342824

Package contents:

- 1x Festool Table Saw TKS 80 EBS
- 1x Suction set
- 1x Open-end spanner SW 23
- 1x Open-end spanner SW 50
- 1x HW Universal saw blade W40
- 1x Allen key SW 5
- 1x Cartridge KT TKS 80
- 1x Sliding stick
- 1x Angled stop

Product description:

The TKS 80 EBS table saw from Festool ensures maximum safety in the workshop. Its built-in sensitive SawStop technology ensures greater safety when sawing non-conductive metals. The saw will stop immediately upon skin contact and disappear into the work surface. The cartridge releases a pre-tensioned spring and shoots an aluminium block into the saw blade. The SawStop technology can also be switched off, so that conductive materials can then be sawn. After release, the cartridge can be replaced in a few simple steps. Every year there are about 4000 injuries when using a circular saw. This corresponds to 16 injuries per working day. Approximately 26 % of serious accidents are then covered by an accident pension. These figures should make every user think, and one should invest in his or her highest asset, the body and its integrity. The TKS 80 EBS can be used very flexibly. Whether a cutting height of 80 mm, the extendable working length or the longitudinal and crosscut fence, all this ensures great flexibility when working. The angle scale with locking points and fine adjustment is perfectly suited for crosscutting and longitudinal cuts. There is less tearing on the workpiece thanks to the left-hand swivelling of the saw blade. Crosscuts up to a width of 820 mm with sliding table are possible without any problems at a cutting depth of 20 mm. Longitudinal cuts up to a cutting height of 80 mm and a width of 600 mm with widening are also no problem. Moreover, the CLEANTEC extraction socket ensures a clear visibility and low-dust working. The side-mounted tool garage provides space for saw blades, cartridges and the sliding stick. Festool is a premium manufacturer of power tools, the high quality standards and the sophisticated tool concepts are what make this brand stand out.

Technical specifications:

Manufacturer: Festool
Manufacturer number: 575781
Power consumption 2 200 W
Idle speed: 1700 - 3500 min-¹
Saw blade Ø: 254 mm
Cutting height 90°/45°: 80/56 mm
Inclination: -2 / 47 °
Table dimensions: 690 x 580 mm
Table height folded: 385 mm
Table height folded out: 900 mm
Dust extraction connection Ø: 27/36 mm
Weight: 37 kg
Drive type: Mains
Sawing: A-weighted sound pressure level Lp: 87 dB(A)
Sawing: A-weighted sound power level Lw: 102 dB(A)
Sawing: uncertainty (noise) K: 3 dB

Read more

Product form

Festool TKS 80 EBS Table Saw 2200 Watt 254 mm ( 575781 ) SawStop Technologie

Anderer Lieferumfang? Klicke hier
  • Vendor Festool
  • condition  New
  • Unzufrieden? 100 Tage kostenfreie Retoure

Profitiere von der Festool Herstellergarantie – die offiziellen Bedingungen findest Du hier. Garantiegeber: Festool GmbH, Wertstraße 20, D-73240 Wendlingen a.N.
Deine gesetzlichen Gewährleistungsansprüche werden durch die Herstellergarantie nicht eingeschränkt..

  • Shipped today? Order within: Oct 13, 2025 14:00:00 +0200
€2.541,08
incl. VAT, plus shipping

As a member you will receive [points_amount]

in stock delivery within 7 working days

    • American Express
    • Apple Pay
    • Google Pay
    • iDEAL
    • Klarna
    • Mastercard
    • +12 weitere

    +780.000 BROs folgen uns auf

     

    Smarte Produktberatung

    Rechnung, Versand & GPSR

    Versand & Rechnung durch: Dinotech e.K.

    Responsible Person for the EU (GPSR) EU-based economic operator that ensures the product complies with the necessary regulations.
    • customerservice-de@festool.com
    • +496126210
    • Germany
    • 73240 Wendlingen
    • Wertstr. 20
    • Festool GmbH

    Description

    SKU: 21402
    EAN: 4014549342824

    Package contents:

    - 1x Festool Table Saw TKS 80 EBS
    - 1x Suction set
    - 1x Open-end spanner SW 23
    - 1x Open-end spanner SW 50
    - 1x HW Universal saw blade W40
    - 1x Allen key SW 5
    - 1x Cartridge KT TKS 80
    - 1x Sliding stick
    - 1x Angled stop

    Product description:

    The TKS 80 EBS table saw from Festool ensures maximum safety in the workshop. Its built-in sensitive SawStop technology ensures greater safety when sawing non-conductive metals. The saw will stop immediately upon skin contact and disappear into the work surface. The cartridge releases a pre-tensioned spring and shoots an aluminium block into the saw blade. The SawStop technology can also be switched off, so that conductive materials can then be sawn. After release, the cartridge can be replaced in a few simple steps. Every year there are about 4000 injuries when using a circular saw. This corresponds to 16 injuries per working day. Approximately 26 % of serious accidents are then covered by an accident pension. These figures should make every user think, and one should invest in his or her highest asset, the body and its integrity. The TKS 80 EBS can be used very flexibly. Whether a cutting height of 80 mm, the extendable working length or the longitudinal and crosscut fence, all this ensures great flexibility when working. The angle scale with locking points and fine adjustment is perfectly suited for crosscutting and longitudinal cuts. There is less tearing on the workpiece thanks to the left-hand swivelling of the saw blade. Crosscuts up to a width of 820 mm with sliding table are possible without any problems at a cutting depth of 20 mm. Longitudinal cuts up to a cutting height of 80 mm and a width of 600 mm with widening are also no problem. Moreover, the CLEANTEC extraction socket ensures a clear visibility and low-dust working. The side-mounted tool garage provides space for saw blades, cartridges and the sliding stick. Festool is a premium manufacturer of power tools, the high quality standards and the sophisticated tool concepts are what make this brand stand out.

    Technical specifications:

    Manufacturer: Festool
    Manufacturer number: 575781
    Power consumption 2 200 W
    Idle speed: 1700 - 3500 min-¹
    Saw blade Ø: 254 mm
    Cutting height 90°/45°: 80/56 mm
    Inclination: -2 / 47 °
    Table dimensions: 690 x 580 mm
    Table height folded: 385 mm
    Table height folded out: 900 mm
    Dust extraction connection Ø: 27/36 mm
    Weight: 37 kg
    Drive type: Mains
    Sawing: A-weighted sound pressure level Lp: 87 dB(A)
    Sawing: A-weighted sound power level Lw: 102 dB(A)
    Sawing: uncertainty (noise) K: 3 dB

    Read more

    Festool Kreissägeblätter für TKS 80

    This collection is for the cross-selling metafield.

    Festool Tischkreissägen

    This collection is for the similar-category metafield.

    Customer Reviews

    Based on 1 review
    100%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    T
    Tilo Schweizer
    Sehr schnelle Lieferung und top Service!

    Das Produkt hat meine Erwartungen übertroffen! Die Qualität ist top und die Funktionalität einwandfrei. Ich bin rundum zufrieden und kann das Produkt nur weiterempfehlen. 5 Sterne! 👍

    Reviews in Other Languages

    Recently Viewed

    Top questions at a glance

    How can I pay for my order?

    We offer a wide range of secure payment methods:

    online payment methods

    PayPal, KLARNA, Google Pay, Apple Pay and Shop Pay.

    Credit cards

    You can also pay with the major credit cards VISA, MasterCard and American Express. In this case, the payment is secured using the 3D-Secure method. If we have any reason to suspect fraudulent ordering, we will automatically cancel the payment.

    How can I pay for my order?
    How do I receive an invoice?

    You will automatically receive the invoice from our shipping partner in a separate email after receipt of payment. It will not come with the confirmation of receipt. In addition, a paper invoice will be enclosed with the order.

    Therefore, please also check your spam folder again thoroughly and otherwise get in touch here in our invoice portal.

    How do I receive an invoice?
    Returns: I want to return something

    If you wish to return all or part of your order and you're from the EU 🇪🇺, please check our returns portal.

    For returns from Switzerland 🇨🇭 and Liechtenstein 🇱🇮, use this returns portal.

    Where is my order?

    There are various ways to track the shipment status:

    The dispatch usually takes 1 - 2 working days. If it takes longer or you think the parcel has disappeared, please contact us here in our problem portal.

    Your tool family

    • <strong>Personalized support</strong>

      Personalized support

      Unlike many other platforms, we offer you personal advice and service that supports you at all times.

    • <strong></strong>

    • <strong>Best Prices</strong>

      Best Prices

      For each item with this symbol, you will currently receive the best online price (for the german market) from us. You can find the exact information on this on the product pages.

    This is Toolbrothers

    Tools are the engine of our society. Whether you're building a house, bought an IKEA cabinet or finally want to fix that leaky faucet, you need tools. We provide you with tools – and in true Toolbrothers style.
    • Super fast
    • Reliable
    • With the best service

    Log in

    Forgot your password?

    Don't have an account yet?
    Create account