Only this week: 10% off all BOSCH power tools - discount will be deducted in the shopping cart

Description

SKU: 138698
EAN: 4007220936399

Scope of Delivery:
- 1x PFERD tapered brush Ø 70 mm wire thickness 0.15 mm

Product Description:
for medium-duty brushing work such as deburring, cleaning and derusting stainless steel (INOX) - INOX trim blue for use on all stainless steels (INOX) such as V4A. Stainless steel wire (INOX) can withstand temperatures up to 450 °C. Shank Ø 6 mm

Technical Data:
- Drive type: Flexible shaft drive, drill, straight grinder
- Application recommendation: For best performance, use a tool drive with at least 300 watts. Please observe the recommended speeds.
- Machinable materials: Bronze, aluminium, cobalt-based alloys, hard non-ferrous metals, high-temperature materials, nickel-based alloys (e.g. Inconell and Hasteloy), nickel or titanium-based superalloys, other non-ferrous metals, soft titanium alloys (tensile strength 500 N/mm²), titanium, titanium alloys, stainless steel (INOX)
- Machining tasks: Cleaning, roughening, paint stripping, removing oxide layers, removing annealing colours, derusting, deburring
- Trimming material: Stainless steel wire (INOX)
- Width: 10mm
- Ø shaft: 6mm
- RPM, opt., up to: 9800RPM
- RPM, opt., from: 6000RPM
- Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm.
- Advantages: Very good corrosion resistance. The brush is degreased and leaves no oil residue on the workpiece. Optimum access to hard-to-reach areas such as inside edges, grooves and slots. Produces fine surfaces. Optimum adaptation to the contour of the workpiece thanks to high flexibility.
- Ø: 70 mm
- Fill width: 10 mm
- Fill length: 15 mm
- Wire thickness: 0.15 mm
- Total length: 58 mm
- Max. speed: 15000 min-¹
- Content: 10 pcs.
- Material suitability INOX: very suitable
- Material suitability aluminium: very suitable
- Brand: PFERD
- Material: Stainless steel
- Shank Ø: 6 mmFor commercial use, please observe the building regulations!

For commercial use, please observe the building regulations!

Read more

Product form

PFERD tapered brush KBU INOX ( 8000431752 ) Ø 70 mm wire thickness 0.15 mm 15000 min-¹

  • Vendor PFERD
  • condition  New
  • Unzufrieden? 100 Tage kostenfreie Retoure
  • Shipped today? Order within: Sep 13, 2025 14:00:00 +0200
€24,84
incl. VAT, plus shipping

As a member you will receive [points_amount]

in stock delivery expected in  Wed, 09/17/2025

    • American Express
    • Apple Pay
    • Google Pay
    • PayPal
    • Visa
    • Klarna
    • Mastercard

    Smarte Produktberatung

     
    • Responsible Person for the EU (GPSR) EU-based economic operator that ensures the product complies with the necessary regulations.
      • August Rüggeberg GmbH&Co. KG Pferd - Werkzeuge
      • Hauptstr. 13
      • 51709 Marienheide
      • Germany
      • +49226490
      • info@pferd.com

    Description

    SKU: 138698
    EAN: 4007220936399

    Scope of Delivery:
    - 1x PFERD tapered brush Ø 70 mm wire thickness 0.15 mm

    Product Description:
    for medium-duty brushing work such as deburring, cleaning and derusting stainless steel (INOX) - INOX trim blue for use on all stainless steels (INOX) such as V4A. Stainless steel wire (INOX) can withstand temperatures up to 450 °C. Shank Ø 6 mm

    Technical Data:
    - Drive type: Flexible shaft drive, drill, straight grinder
    - Application recommendation: For best performance, use a tool drive with at least 300 watts. Please observe the recommended speeds.
    - Machinable materials: Bronze, aluminium, cobalt-based alloys, hard non-ferrous metals, high-temperature materials, nickel-based alloys (e.g. Inconell and Hasteloy), nickel or titanium-based superalloys, other non-ferrous metals, soft titanium alloys (tensile strength 500 N/mm²), titanium, titanium alloys, stainless steel (INOX)
    - Machining tasks: Cleaning, roughening, paint stripping, removing oxide layers, removing annealing colours, derusting, deburring
    - Trimming material: Stainless steel wire (INOX)
    - Width: 10mm
    - Ø shaft: 6mm
    - RPM, opt., up to: 9800RPM
    - RPM, opt., from: 6000RPM
    - Safety instructions: When clamping the brush, ensure that the shaft is clamped as far as possible into the holder. This applies in particular to use in the high speed range. The minimum clamping length is 10 mm.
    - Advantages: Very good corrosion resistance. The brush is degreased and leaves no oil residue on the workpiece. Optimum access to hard-to-reach areas such as inside edges, grooves and slots. Produces fine surfaces. Optimum adaptation to the contour of the workpiece thanks to high flexibility.
    - Ø: 70 mm
    - Fill width: 10 mm
    - Fill length: 15 mm
    - Wire thickness: 0.15 mm
    - Total length: 58 mm
    - Max. speed: 15000 min-¹
    - Content: 10 pcs.
    - Material suitability INOX: very suitable
    - Material suitability aluminium: very suitable
    - Brand: PFERD
    - Material: Stainless steel
    - Shank Ø: 6 mmFor commercial use, please observe the building regulations!

    For commercial use, please observe the building regulations!

    Read more

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Recently Viewed

    Top questions at a glance

    How can I pay for my order?

    We offer a wide range of secure payment methods:

    online payment methods

    PayPal, KLARNA, Google Pay, Apple Pay and Shop Pay.

    Credit cards

    You can also pay with the major credit cards VISA, MasterCard and American Express. In this case, the payment is secured using the 3D-Secure method. If we have any reason to suspect fraudulent ordering, we will automatically cancel the payment.

    How can I pay for my order?
    How do I receive an invoice?

    You will automatically receive the invoice from our shipping partner in a separate email after receipt of payment. It will not come with the confirmation of receipt. In addition, a paper invoice will be enclosed with the order.

    Therefore, please also check your spam folder again thoroughly and otherwise get in touch here in our invoice portal.

    How do I receive an invoice?
    Returns: I want to return something

    If you wish to return all or part of your order and you're from the EU 🇪🇺, please check our returns portal.

    For returns from Switzerland 🇨🇭 and Liechtenstein 🇱🇮, use this returns portal.

    Where is my order?

    There are various ways to track the shipment status:

    The dispatch usually takes 1 - 2 working days. If it takes longer or you think the parcel has disappeared, please contact us here in our problem portal.

    Your tool family

    • <strong>Personalized support</strong>

      Personalized support

      Unlike many other platforms, we offer you personal advice and service that supports you at all times.

    • <strong></strong>

    • <strong>Best Prices</strong>

      Best Prices

      For each item with this symbol, you will currently receive the best online price (for the german market) from us. You can find the exact information on this on the product pages.

    This is Toolbrothers

    Tools are the engine of our society. Whether you're building a house, bought an IKEA cabinet or finally want to fix that leaky faucet, you need tools. We provide you with tools – and in true Toolbrothers style.
    • Super fast
    • Reliable
    • With the best service

    Log in

    Forgot your password?

    Don't have an account yet?
    Create account