Products

Show previous products

• 

  BENNING BENNING appliance tester ST 725 battery / mains operation ( 4000828856 )

  Wed, 11/26/2025

  Scope of Delivery: - Appliance tester ST 725 battery / mains operation - Appliance tester, carrying case, test lead with tapping terminal, mains connection lead, cold appliance lead, batteries (6 x type AA), micro USB cable, download software on USB stick, replacement batteries see item no. 4000 901 811 Optional accessories (not included in the scope of delivery): 300 "Next test date" test stickers, self-adhesive (see art. no. 4000 828 886) Measuring adapter for three-phase loads (active, with mains voltage-dependent switching devices) for measuring RPE and IPE (direct measurement) under functional conditions: - 16 A CEE 5-pole active, art. no. 4000 828 906 - 32 A CEE 5-pole active, art.No. 4000 828 907 Measuring adapter for three-phase loads (passive), for measuring RPE, Riso and iEA - CEE coupling (5-pin), on earthing contact plug (3-pin) - 16 A CEE earthing contact plug 5-pin passive, art. no. 4000 828 901 - 32 A CEE earthing contact plug 5-pin passive, art. no. 4000 828 902 Product Description: Suitable for electrical engineering, industry, repair, service, municipalities (easy handling, for battery and mains-powered tests) Areas of application: Testing of devices with mains voltage-dependent switching elements/power supply units/relays, such as electronically controlled devices/tools - Information and communication technology devices and devices that can only be fully tested with mains voltage, DIN EN 50678 (VDE 0701), DIN EN 50699 (VDE 0702), DGUV regulation 3 - Measured value memory for 999 test objects, Can be read out via micro USB interface - Download software for test report generation in MS Excel - Direct test report generation via serial interface and optional BENNING PT 2 printer - Integrated real-time clock for storing measured values with test date - Fast (test within a few seconds), complete (appliance tester and RCD/RCD tester in one tester), one-off (testing 1- and 3-phase appliances under functional conditions) - Automatic test sequence with good/bad display for Class I, II (III) appliances and line test - Active testing of 3-phase appliances under functional conditions (optional measuring adapter) - Preset limit values in accordance with VDE standard - Battery capacity for 2500 test specimens - Weight: 950 g Measurements: Protective conductor resistance (200 mA test current with polarity reversal), insulation resistance (250 V/ 500 V test voltage), 30 mA RCD/PRCD circuit breaker test (tripping time at 1 x and 5 x rated current), voltage at external protective contact socket Mains operation: Protective conductor/contact current via residual current/direct measuring method with automatic mains polarity reversal Battery operation: Protective conductor/contact current via equivalent leakage current method Technical Data: - Width: 115mm - Length: 270mm - Height: 55mmNote on the disposal of batteries and rechargeable batteries - As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the Battery Act (BattG) to inform you of the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €1.117,08

• 

  BENNING Benning installation tester IT 105 ( 4000828939 ) for testing electrical systems

  Wed, 11/26/2025

  Scope of Delivery: - 1x BENNING installation tester for testing electrical systems - Robust hard case, test probe with TEST button, test probe/crocodile clip set, test lead with earthing contact plug, shoulder strap, 6 x 1.5 V AA batteries (type AA), calibration certificate Product Description: for simple and efficient safety tests on electrical installations after installation, modification or as a regular periodic test, in accordance with DIN VDE 0100-600 (IEC 60364-6) and DIN VDE 0105-100 (EN 50110) Measurements: Low-impedance resistance (200 mA test current) - Insulation resistance (250 V/ 500 V/ 1000 V test voltage) - Line impedance (L-N/ L) and short-circuit current (PSC) - Loop impedance (L-PE) without RCD tripping and residual current (PFC) - Testing of RCD circuit breakers with tripping time (Auto, ½ x, 1 x, 5 x IdN) and tripping current (ramp) - Test current sinusoidal (AC) and pulsating direct current (A), standard and delayed (S) - Voltage up to 440 V - Frequency - Rotary field Special product benefits: Extra-large graphic display (95 x 55 mm) with backlighting - Test probe with TEST button to start the measurement process - AUTO start function for low-resistance, loop and line impedance measurement - LOCK function (continuous measurement) of insulation resistance - Compensation (zero balancing) of test leads up to 10 Ω for RPE measurement Technical Data: - Application: for testing electrical systems - Brand: BENNINGNote on the disposal of batteries and accumulators Since we sell batteries and accumulators or devices containing batteries and accumulators, we are obliged under the Battery Act (BattG) to draw your attention to the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €1.003,71

• 

  BENNING Benning installation tester IT 130 ( 4000828919 ) for testing electrical systems

  Wed, 11/26/2025

  Scope of Delivery: - 1x BENNING installation tester for testing electrical systems - Installation tester, carrying case, PC software, USB/RS-232 cable, switchable commander test probe, test cable with earthing contact plug, universal 3-wire test lead (L = 1.5 m), 3 x test probes/crocodile clips, charger with 6 rechargeable NiMH batteries (type AA), calibration certificate Optional accessories (not included in the scope of delivery): Earthing set, item no. 4000 828 913 for earthing measurements via 3-wire measuring method, consisting of 2 earth spikes and 3 test leads (2 x L = 20 m, 1 x L = 4.5 m) AC current clamp adapter BENNING CC 3, item no. 4000 828 918 Alternating current 1 A - 40 A AC/DC (300 A AC/DC), output 10 mV/ 1 A. Clamp opening max. 25 mm, measuring category CAT III 600 V. incl. test leads, bag, battery (1x type block battery), replacement battery see art. no. 4000 901 814 Product Description: suitable for electrical engineering, industry (safety tests on electrical systems up to 1000 V), initial commissioning, repeat testing, troubleshooting, logging, photovoltaics - multifunctional installation tester for testing electrical systems in accordance with DIN VDE 0100-600 (IEC 60364-6) and DIN VDE 0105-100 (EN 50110) - incl. testing of RCD/ RCD circuit breakers type B/ B+ (all-current sensitive) and type AC, A, F (mixed frequencies) Measurements: Low-impedance resistance (200 mA with polarity reversal), continuity (7 mA), insulation resistance (50 V/ 100 V/ 250 V/ 500 V/ 1000 V) - Line impedance (L-N/ L) with voltage drop and short-circuit current - Loop impedance (L-PE) without RCD tripping and short-circuit current - Testing of RCDs standard and delayed (S) (type AC, A, F, B, B+ with AUTO test, touch voltage, tripping time and tripping current (ramp)) - TRUE RMS voltage - frequency, rotating field, first fault leakage current in the IT network Measurements via optional accessories: Earthing via 3-wire method with BENNING earthing set (044113), item no. 4000 828 913, TRUE RMS current via current clamp adapter BENNING CC 1 (044037) - BENNING CC 3 (044038), item no. 4000 828 918 Special product benefits: Measured value memory across 4 levels (object, block, fuse, measuring point) - Upload of system structures, Download of measured values - Integrated real-time clock (measured value with date/time) - Bidirectional interfaces (USB/RS 232) - Clear good/bad indication via green/red LED on the test device and on switchable commander test probe - Commander test probe with TEST and MEMORY button and bright LEDConnection for barcode scanner to identify the measuring point and rename the memory location - Graphic display with backlight - Help function with connection diagram - Online voltage monitor - Battery charging function integrated in the device - PC software BENNING PC-Win IT 130: Creation and transfer (upload) of system structures to the BENNING IT 130 for efficient repeat testing - Measured value download and logging (test report, ZVEH test report) Technical Data: - Application: for testing electrical systems - Brand: BENNINGNote on the disposal of batteries and accumulators Since we sell batteries and accumulators or devices containing batteries and accumulators, we are obliged under the Battery Act (BattG) to draw your attention to the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €2.107,61

• 

  Options

  BENNING Benning installation tester PV 1-1+ ( 4000828968 ) Installation and repetition test

  Scope of Delivery: - 1x BENNING installation tester installation and repetition test - Test leads, crocodile clips, MC4/ Sunclix test leads, bag, batteries (6 x type AA), carrying strap, download software, spare batteries see art. no. 4000 901 811 Product Description: Suitable for solar technicians (initial commissioning, repeat testing, troubleshooting), photovoltaic experts and service, cleaning and maintenance teams - Battery-operated Technical Data: - Display: Graphic display (illuminated) - Application: Installation and repeat testing - Brand: BENNING - Measurement category: CAT I 1000 V, CAT III 300 V - Model: PV 1-1+Note on the disposal of batteries and rechargeable batteries As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the Battery Act (BattG) to draw your attention to the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €2.032,52

  Options

• 

  BENNING BENNING insulation/resistance tester IT 100 600 V ( 4000828961 )

  Wed, 11/26/2025

  Scope of Delivery: - Insulation/resistance tester IT 100 600 V - Supplied with rubber protection frame, bag, test leads, crocodile clips, batteries (4 x type AA), spare batteries see art. no. 4000 901 811 Product Description: for insulation and low-resistance measurements on electrical systems, devices, cables, motors and generators - 4-digit, illuminated LCD display (9,999 dots) - red LED for test/external voltage - automatic discharge of capacitive voltages - zero balancing of test leads - lock function for continuous insulation and low-resistance measurement - integrated fuse test - test lock for reverse voltage - measurement category CAT IV 600 V Measuring ranges: Low-resistance measurement up to 60 Ω, insulation resistance up to 20 GΩ (test voltage: 50 V, 100 V, 250 V, 500 V, 1000 V) and resistance measurement with 200 mA test current (testing of protective conductor connections), polarisation index (PI), dielectric absorption rate (DAR), voltage (600 V), resistance (600 kΩ) Technical Data: - Width: 89mm - Length: 206mm - Batteries: 4 x Mignon type AA - Low-impedance resistance: 0.01 Ω-60 Ω - Resistance: 600 kΩ - Insulation resistance: 300 kΩ-20 GΩ - Voltage: 600V - Measured value memory: false - Height: 51mm - Display: 9.999 digit (illuminated)Note on the disposal of batteries and rechargeable batteries - As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the Battery Act (BattG) to inform you of the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €441,39

• 

  BENNING Benning insulation/resistance tester IT 101 ( 4000828900 ) 0.1-600 V AC/DC V

  Wed, 11/26/2025

  Scope of Delivery: - 1x BENNING insulation/resistance meter 0.1-600 V AC/DC V - Supplied with batteries (4 x type AA), switchable test probe, test leads, crocodile clips, rubber protective frame, case, spare batteries see art. no. 4000 901 811 Product Description: suitable for electrical engineering, industry, service, maintenance, troubleshooting - for insulation and low-resistance measurements on electrical systems, devices, cables, motors and generators - 4-digit illuminated LCD display (4000 dots) with bar graph - selectable limit values for ISO measurements - green LED for test passed, red LED for test/external voltage - switchable test probe for triggering the measurement process - internal memory - TRUE RMS voltage with low-pass filter - automatic discharge of capacitive voltages - CAT IV 600 V measuring ranges: insulation resistance: up to 20 GΩ, test voltage: 50 V, 100 V, 250 V, 500 V, 1000 V), calculation of the resulting leakage current - low ohm: up to 40 Ω (with 200 mA test current for testing protective conductor connections) polarisation index (PI), dielectric absorption rate (DAR), voltage 600 V - resistance: 0.01 Ω - 40 k Ω Technical Data: - Width: 95mm - Length: 207mm - Batteries: 4 x Mignon type AA - Low-impedance resistance: 0.01 Ω-40 Ω - Resistance: 0.01 Ω- 40 kΩ - Insulation resistance: 50 kOhm-20 GOhm - Voltage: 0.1-600 V AC/DCV - Measured value memory: 500 measurement results - Height: 52mm - Display: 4,000 digit (illuminated) - Procedure: TRUE RMS - Brand: BENNING - Measurement category: CAT IV 600 V - Model: IT 101Note on the disposal of batteries and rechargeable batteries As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the German Battery Act (BattG) to draw your attention to the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €587,00

• 

  BENNING BENNING leakage current clamp CM 9-1 Measuring range 0.010 mA - 60 A AC ( 4000828949 )

  Wed, 11/26/2025

  Scope of Delivery: - Leakage current clamp CM 9-1 Measuring range 0.010 mA - 60 A AC - Delivery incl. bag, test leads, batteries (2 x type AAA), spare batteries see art. no. 4000 901 810 Product Description: 4-digit illuminated LCD display (6,000 dots) - Measurement of leakage, residual. protective conductor and load currents in electrical systems, devices and machines - measurement without disconnection under normal operating conditions - ideal for preventive maintenance and troubleshooting (protection against property damage and personal injury, power failures, etc.) - reliable and simple detection of insulation faults (e.g. defective cables, loose terminals, dirt, moisture, etc.) frequency characteristics in accordance with EN 61557-16 for testing electrical devices in accordance with VDE 0701-0702 - LPF low-pass filter (40 - 70 Hz) for suppressing high-frequency interference signals - frequency range for railway and industrial applications: 15 Hz - 1 kHz (fg) - Defined protection against external magnetic fields in accordance with EN 61557-13, class 2 ≤ 30 A/m - Automatic range selection - Peak value (PEAK), measured value memory (HOLD) - Zero adjustment (ZERO) - Clamp opening max. 23 mm - Measuring category CAT IV 300 V, CAT III 600 V - Measuring ranges: Alternating current (0.010 mA - 60 A), highest resolution of 1 µA in the 6 mA measuring range, voltage (0.01 V - 600 V AC/DC), resistance (0.1 Ω - 600 kΩ), continuity test Technical Data: - Width: 76mm - Length: 210mm - Height: 34mm - Display: LCDNote on the disposal of batteries and rechargeable batteries - As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the Battery Act (BattG) to inform you of the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €554,56

• 

  BENNING Benning measuring adapter ( 4000828901 ) for 3-phase consumers passive

  Wed, 11/26/2025

  Scope of Delivery: - 1x BENNING measuring adapter for 3-phase consumers passive Product Description: for three-phase loads (passive) - for measuring RPE, RISO and IEA - CEE coupling (5-pin), on earthing contact plug (3-pin) for use with appliance tester ST 710 art. no. 4000 828 883, ST 725 art. no. 4000 828 856, ST 755+ set art. no. 4000 828 959, ST 760+ set art. no. 4000 828 958 Technical Data: - Application: for 3-phase passive loads - Version: 16 A CEE earthing contact plug - Brand: BENNINGPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €93,08

• 

  Options

  BENNING Benning measuring adapter ( 4000828902 ) for 3-phase consumers passive

  Scope of Delivery: - 1x BENNING measuring adapter for 3-phase consumers passive Product Description: for three-phase loads (passive) - for measuring RPE, RISO and IEA - CEE coupling (5-pin), on earthing contact plug (3-pin) for use with appliance tester ST 710 art. no. 4000 828 883, ST 725 art. no. 4000 828 856, ST 755+ set art. no. 4000 828 959, ST 760+ set art. no. 4000 828 958 Technical Data: - Application: for 3-phase passive loads - Version: 32 A CEE earthing contact plug - Brand: BENNINGPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €114,34

  Options

• 

  BENNING Benning measuring adapter ( 4000828907 ) for 3-phase consumers active

  Wed, 11/26/2025

  Scope of Delivery: - 1x BENNING measuring adapter for 3-phase consumers active Product Description: for three-phase loads (active) - for measuring RPE and IPE under functional conditions (direct measurement) - adapter 400 V CEE coupling/plug (5-pin) with evaluation electronics and measuring signal cable for use with appliance tester ST 725 part no. 4000 828 856 Technical Data: - Application: active for 3-phase consumers - Version: 32 A CEE 5-pole - Brand: BENNINGPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €532,13

• 

  BENNING Benning measuring adapter MA 4 ( 4000828952 ) active/passive testing also for welding devices

  Wed, 11/26/2025

  Scope of Delivery: - 1x BENNING measuring adapter active/passive test Product Description: for active and passive testing of 1- and 3-phase appliances (incl. welding equipment) and extension cables - suitable for BENNING ST 725, ST 750 A, ST 755, ST 755+, ST 760 and ST 760+ appliance testers - connection for test objects with CEE 16 A/230 V, CEE 16 A/400 V and VEE 32 A/400 V plugs - measuring adapter can be fully loaded with 32 A - supported measurements: RPE protective conductor resistance, RISO insulation resistance, IDiff. Residual current, IEA equivalent leakage current, tripping time and tripping current of PRCDs - Equipment and cable function test incl. open circuit, short circuit and rotating field test - "Function" rotary switch for equipment selection: Electrical device or extension lead (cable) - "Cable" rotary switch: Connection of all or individual phases for detailed cable testing - Self-test: Deliberate connection of a device fault current (1 mA / 3 mA) to test the entire test system - 7 status LEDs and 1 mains LED - Robust and dustproof/waterproof IP 67 protective case Technical Data: - Application: active/passive testing - Design: also welding equipment - Brand: BENNINGPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €1.632,73

• 

  BENNING BENNING measuring adapter MA3 passive testing ( 4000828951 )

  Wed, 11/26/2025

  Scope of Delivery: - Measuring adapter MA3 passive testing Product Description: for testing CEE extension cables and passive testing of 1-phase and 3-phase appliances - suitable for BENNING ST 725, ST 750 A, ST 755, ST 755+, ST 760 and ST 760+ appliance testers - 16 A CEE 3-pole, 16 A/32 A CEE 5-pole - enables testing of RPE protective conductor resistance in conjunction with the appliance testers, RISO insulation resistance, IPE/IBER protective conductor and touch current in the equivalent method and the functional test (cable break, short circuit) as well as the rotating field test of CEE extension cables - robust and dust/waterproof IP 67 protective case Technical Data: - nanFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €837,60

Show more products