Cut-off wheels
-
PFERD PFERD flap disc ( 4000841619 ) Ø40xH15mm grit 120 shank Ø 6 mm
Wed, 10/08/2025
Scope of Delivery: - 1x PFERD flap disc Ø40xH15mm grit size 120 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Straight grinder, flexible shaft drive - Application recommendation: Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be machined, the coarser the surface (when using , An increase in the stock removal rate should be achieved by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. - Machinable materials: Malleable cast iron, steels up to 1,200 N/mm² ( 54 HRC, grey/spheroidal cast iron (GG/GJL, GGG/GJS), aluminium - Machining tasks: Levelling, weld seam processing, surface processing, deburring, structuring (matting, line matting and satin finishing), fine grinding in stages - Width: 15mm - Note: PFERDERGONOMICS recommends flap discs in order to sustainably reduce the vibration and noise generated during use and to improve working comfort. - Length, shaft: 40mm - RPM, opt.: 9600RPM - Safety instructions: For safety reasons, the specified maximum permissible speed must never be exceeded. The contact pressure must be significantly reduced if the specified optimum speed is exceeded. Safety is only guaranteed if the clamping length is at least 15 mm and the specified maximum speed is not exceeded with open shank lengths. - Advantages: Consistently high material removal over the entire service life, as new, aggressive abrasive is constantly released. Optimum contour adaptation due to high flexibility. Can be used very close to edges and at angles thanks to the flat cast core design. - Grit size: 120 - Max. speed: 19100 min-¹ - Abrasive: Aluminium oxide A - Material suitability Aluminium: limited suitability - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Material: Aluminium oxide - Ø: 40 mm - Height: 15 mm - Material suitability plastic: limited suitability - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€11,40
-
NORTON CLIPPER Norton Clipper Diamantschleiftopf Classic CG ( 4200001363 ) 180 mm 22,23 mm
Lieferumfang:- 1x NORTON CLIPPER Diamantschleiftopf 180 mmProduktbeschreibung:mit iHD-Technologie™ · für Winkelschleifer · Oberflächenbearbeitung aller allgemeinen Baumaterialien, auch sehr gut geeignet für abrasive Materialien · kleinere Segmente sehr gut für harte Materialien geeignet · flache Seiten vermeiden eine Beschädigung von Wänden und Decken bei der Anwendung · hoher Materialabtrag, hohe Standzeit · große Belüftungslöcher sorgen für eine bessere Kühlung und weniger HitzeentwicklungTechnische Daten:- Ø: 180 mm- Bohrung: 22,23 mm- Einsatzgebiet: Beton, Stahlbeton, Naturstein - Marke: NORTON CLIPPERBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!
-
NORTON CLIPPER Norton Clipper Diamantschleiftopf Classic CG ( 4200001362 ) 125 mm 22,23 mm
Lieferumfang:- 1x NORTON CLIPPER Diamantschleiftopf 125 mmProduktbeschreibung:mit iHD-Technologie™ · für Winkelschleifer · Oberflächenbearbeitung aller allgemeinen Baumaterialien, auch sehr gut geeignet für abrasive Materialien · kleinere Segmente sehr gut für harte Materialien geeignet · flache Seiten vermeiden eine Beschädigung von Wänden und Decken bei der Anwendung · hoher Materialabtrag, hohe Standzeit · große Belüftungslöcher sorgen für eine bessere Kühlung und weniger HitzeentwicklungTechnische Daten:- Ø: 125 mm- Bohrung: 22,23 mm- Einsatzgebiet: Beton, Stahlbeton, Naturstein - Marke: NORTON CLIPPERBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!
-
NORTON CLIPPER Norton Clipper Diamantschleiftopf Classic CG ( 4200001361 ) 100 mm 22,23 mm
Lieferumfang:- 1x NORTON CLIPPER Diamantschleiftopf 100 mmProduktbeschreibung:mit iHD-Technologie™ · für Winkelschleifer · Oberflächenbearbeitung aller allgemeinen Baumaterialien, auch sehr gut geeignet für abrasive Materialien · kleinere Segmente sehr gut für harte Materialien geeignet · flache Seiten vermeiden eine Beschädigung von Wänden und Decken bei der Anwendung · hoher Materialabtrag, hohe Standzeit · große Belüftungslöcher sorgen für eine bessere Kühlung und weniger HitzeentwicklungTechnische Daten:- Ø: 100 mm- Bohrung: 22,23 mm- Einsatzgebiet: Beton, Stahlbeton, Naturstein - Marke: NORTON CLIPPERBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!
-
MÜLLER Müller felt polishing disc ( 4000843476 ) Ø200xW25x20mm wool felt
Scope of Delivery: - 1x MÜLLER felt polishing disc Ø200xW25x20mm Product Description: Wool felt - white - can be used in conjunction with polishing paste for surface treatment Technical Data: - Colour: white - Ø: 200 mm - width: 25 mm - Bore: 20 mm - max. speed: 1900 min-¹ - Material suitability INOX: very suitable - Abrasive: Wool felt - Material suitability aluminium: very suitable - Material suitability steel: very suitable - Brand: MÜLLER - Material suitability plastic: very suitablePlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
-
MÜLLER Müller felt polishing disc ( 4000843475 ) Ø150xW20x20mm wool felt
Wed, 10/08/2025
Scope of Delivery: - 1x MÜLLER felt polishing disc Ø150xW20x20mm Product Description: Wool felt - white - can be used in conjunction with polishing paste for surface treatment Technical Data: - Colour: white - Ø: 150 mm - width: 20 mm - Bore: 20 mm - max. speed: 2540 min-¹ - Material suitability INOX: very suitable - Abrasive: Wool felt - Material suitability aluminium: very suitable - Material suitability steel: very suitable - Brand: MÜLLER - Material suitability plastic: very suitablePlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
€33,96
-
MÜLLER Müller felt polishing disc ( 4000843474 ) Ø125xW20x20mm wool felt
Wed, 10/08/2025
Scope of Delivery: - 1x MÜLLER felt polishing disc Ø125xW20x20mm Product Description: Wool felt - white - can be used in conjunction with polishing paste for surface treatment Technical Data: - Colour: white - Ø: 125 mm - width: 20 mm - Bore: 20 mm - max. speed: 3050 min-¹ - Material suitability INOX: very suitable - Abrasive: Wool felt - Material suitability aluminium: very suitable - Material suitability steel: very suitable - Brand: MÜLLER - Material suitability plastic: very suitablePlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
€25,93
-
Mirka Mirka adhesive sanding disc IRIDIUM Grip 121L ( 4000845356 ) 150 mm grit 100 ceramic/corundum number of holes 121
Wed, 10/08/2025
Scope of Delivery: - 1x MIRKA adhesive sanding disc 150 mm grit 100 Product Description: Ceramic/corundum - premium latex paper sanding disc for wood, metal, paint and plastic processing - long service life - aggressive sanding performance - top surface finish Technical Data: - Ø: 150 mm - Grit: 100 - Number of holes: 121 - Material suitability INOX: limited suitability - Material suitability aluminium: limited suitability - Material suitability cast iron: limited suitability - Area of application: for wood / metal / paint / plastic - Material suitability steel: conditionally suitable - Material: Ceramic/corundum - Suction holes Ø: 4 mm - Material suitability for paint: very suitable - Material suitability wood: very suitable - Material suitability plastic: very suitable - Brand: MIRKAFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€87,61
-
Mirka Mirka adhesive grinding disc GALAXY Grip Multifit ( 4000845346 ) 150 mm grit 320 ceramic/corundum number of holes 72
Wed, 10/08/2025
Scope of Delivery: - 1x MIRKA adhesive sanding disc 150 mm grit 320 Product Description: Ceramic/corundum - premium film sanding disc for wood, metal, paint and plastic processing - long service life - aggressive sanding performance - high edge stability Technical Data: - Ø: 150 mm - Grit size: 320 - Number of holes: 72 - Material suitability INOX: limited suitability - Material suitability aluminium: limited suitability - Material suitability cast iron: limited suitability - Area of application: for wood / metal / paint / plastic - Material suitability steel: conditionally suitable - Material: Ceramic/corundum - Suction holes Ø: 4 mm - Material suitability for paint: very suitable - Material suitability wood: very suitable - Material suitability plastic: very suitable - Brand: MIRKAFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€41,22
-
Mirka Mirka adhesive grinding disc GALAXY Grip Multifit ( 4000845345 ) 150 mm grit 240 ceramic/corundum number of holes 72
Wed, 10/08/2025
Scope of Delivery: - 1x MIRKA adhesive sanding disc 150 mm grit 240 Product Description: Ceramic/corundum - premium film sanding disc for wood, metal, paint and plastic processing - long service life - aggressive sanding performance - high edge stability Technical Data: - Ø: 150 mm - Grit size: 240 - Number of holes: 72 - Material suitability INOX: conditionally suitable - Material suitability aluminium: limited suitability - Material suitability cast iron: limited suitability - Area of application: for wood / metal / paint / plastic - Material suitability steel: conditionally suitable - Material: Ceramic/corundum - Suction holes Ø: 4 mm - Material suitability for paint: very suitable - Material suitability wood: very suitable - Material suitability plastic: very suitable - Brand: MIRKAFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€41,22
-
Mirka Mirka adhesive grinding disc GALAXY Grip Multifit ( 4000845336 ) 125 mm grit 1000 ceramic/corundum number of holes 72
Wed, 10/08/2025
Scope of Delivery: - 1x MIRKA adhesive sanding disc 125 mm grit 1000 Product Description: Ceramic/corundum - premium film sanding disc for wood, metal, paint and plastic processing - long service life - aggressive sanding performance - high edge stability Technical Data: - Ø: 125 mm - Grit size: 1000 - Number of holes: 72 - Material suitability INOX: conditionally suitable - Material suitability aluminium: limited suitability - Material suitability cast iron: limited suitability - Area of application: for wood / metal / paint / plastic - Material suitability steel: conditionally suitable - Material: Ceramic/corundum - Suction holes Ø: 4 mm - Material suitability for paint: very suitable - Material suitability wood: very suitable - Material suitability plastic: very suitable - Brand: MIRKAFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€42,10
-
Mirka Mirka adhesive grinding disc GALAXY Grip Multifit ( 4000845342 ) 150 mm grain size 120 ceramic/corundum number of holes 72
Wed, 10/08/2025
Scope of Delivery: - 1x MIRKA adhesive sanding disc 150 mm grit size 120 Product Description: Ceramic/corundum - premium film sanding disc for wood, metal, paint and plastic processing - long service life - aggressive sanding performance - high edge stability Technical Data: - Ø: 150 mm - Grit size: 120 - Number of holes: 72 - Material suitability INOX: conditionally suitable - Material suitability aluminium: limited suitability - Material suitability cast iron: limited suitability - Area of application: for wood / metal / paint / plastic - Material suitability steel: conditionally suitable - Material: Ceramic/corundum - Suction holes Ø: 4 mm - Material suitability for paint: very suitable - Material suitability wood: very suitable - Material suitability plastic: very suitable - Brand: MIRKAFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€41,22
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"