Drill Bit Sets
-
Ruko RUKO machine tap DIN 371B M5x0.8 mm ( 4000601923 )
Mon, 10/06/2025
Scope of Delivery: - Machine tap DIN 371B M5x0.8 mm Product Description: HSS-Co5 - form B - straight fluted - flanks relief ground - metric ISO thread - DIN 13 sheet 1 - tolerance zone ISO2 (6H) - with skiving cut for through hole threads - for unalloyed and alloyed steels up to 1000 N/mm² strength, malleable cast iron and non-ferrous metals Technical Data: - Cutting direction: right-hand cutting - Shank Ø: 6mmFor commercial use, please observe the building regulations!
€14,28
-
Ruko RUKO machine tap DIN 371B M4x0.7 mm ( 4000601889 )
Mon, 10/06/2025
Scope of Delivery: - Machine tap DIN 371B M4x0.7 mm Product Description: HSS - form B - straight fluted - undercut flanks - metric ISO thread - DIN 13 sheet 1 - tolerance zone ISO2 (6H) - with skiving cut for through hole threads - for unalloyed and low-alloy steels up to 800 N/mm² strength, malleable cast iron and non-ferrous metals Technical Data: - Cutting direction: right-hand cutting - Shank Ø: 4.5mmFor commercial use, please observe the building regulations!
€13,06
-
Ruko RUKO machine tap DIN 371B M3x0.5 mm ( 4000601921 )
Mon, 10/06/2025
Scope of Delivery: - Machine tap DIN 371B M3x0.5 mm Product Description: HSS-Co5 - form B - straight fluted - flanks relief ground - metric ISO thread - DIN 13 sheet 1 - tolerance zone ISO2 (6H) - with skiving cut for through hole threads - for unalloyed and alloyed steels up to 1000 N/mm² strength, malleable cast iron and non-ferrous metals Technical Data: - Cutting direction: right-hand cutting - Shank Ø: 3.5mmFor commercial use, please observe the building regulations!
€14,28
-
Ruko RUKO machine tap DIN 371B M3x0.5 mm ( 4000601888 )
Mon, 10/06/2025
Scope of Delivery: - Machine tap DIN 371B M3x0.5 mm Product Description: HSS - form B - straight fluted - undercut flanks - metric ISO thread - DIN 13 sheet 1 - tolerance zone ISO2 (6H) - with skiving cut for through hole threads - for unalloyed and low-alloy steels up to 800 N/mm² strength, malleable cast iron and non-ferrous metals Technical Data: - Cutting direction: right-hand cutting - Shank Ø: 3.5mmFor commercial use, please observe the building regulations!
€13,06
-
Ruko RUKO machine tap DIN 371B M10x1.5 mm ( 4000601926 )
Mon, 10/06/2025
Scope of Delivery: - Machine tap DIN 371B M10x1.5 mm Product Description: HSS-Co5 - form B - straight fluted - flanks relief ground - metric ISO thread - DIN 13 sheet 1 - tolerance zone ISO2 (6H) - with skiving cut for through hole threads - for unalloyed and alloyed steels up to 1000 N/mm² strength, malleable cast iron and non-ferrous metals Technical Data: - Cutting direction: right-hand cutting - Shank Ø: 10mmFor commercial use, please observe the building regulations!
€17,00
-
Ruko RUKO machine tap DIN 371B M10x1.5 mm ( 4000601893 )
Mon, 10/06/2025
Scope of Delivery: - Machine tap DIN 371B M10x1.5 mm Product Description: HSS - form B - straight fluted - undercut flanks - metric ISO thread - DIN 13 sheet 1 - tolerance zone ISO2 (6H) - with skiving cut for through hole threads - for unalloyed and low-alloy steels up to 800 N/mm² strength, malleable cast iron and non-ferrous metals Technical Data: - Cutting direction: right-hand cutting - Shank Ø: 10mmFor commercial use, please observe the building regulations!
€15,23
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 3.4 mm ( 4000600150 )
Mon, 10/06/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 3.4 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.09mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
€12,90
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 4.1 mm ( 4000600158 )
Mon, 10/06/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 4.1 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.1 mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
€14,53
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 3.9 mm ( 4000600156 )
Mon, 10/06/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 3.9 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.1 mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
€13,78
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 3.8 mm ( 4000600155 )
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 3.8 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.1 mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
-
Ruko RUKO Spiralbohrer DIN 338 Typ N Nenn-Ø 3,6 mm ( 4000600152 )
Lieferumfang:Spiralbohrer DIN 338 Typ N Nenn-Ø 3,6 mmProduktbeschreibung:HSS · DIN 338 · Typ N · Spitzenwinkel 118 ° · rechtsschneidend · Kegelmantelanschliff, ab Ø 2,0 mm Kreuzanschliff nach DIN 1412 C · der komplett geschliffene Spiralbohrer verfügt über eine erhöhte Rundlaufgenauigkeit · für Stahl, Stahlguss legiert und unlegiert (bis 900 N/mm² Festigkeit), Grau-, Temper-, Sphäro- und Druckguss, Sintereisen, Neusilber, Graphit, kurzspanende Aluminiumlegierungen, Messing und Bronze · Leistungsstarker Spiralbohrer, geeignet für alle normalen Bohrarbeiten in allgemein gängigen Werkstoffen Weitere Größen auf Anfrage verfügbar.Technische Daten: Schneidrichtung: rechtsschneidend Vorschub in Stahl bis 800 N: 0,09mm/U Qualität: profilgeschliffen Nenn-Ø-Toleranz: h8
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 3.7 mm ( 4000600153 )
Mon, 10/06/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 3.7 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.09mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
€13,78
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"