Drill Bit Sets
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 3.5 mm ( 4000600151 )
Mon, 10/06/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 3.5 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.09mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
€12,90
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 3.3 mm ( 4000600149 )
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 3.3 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.08 mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 3.2 mm ( 4000600147 )
Mon, 10/06/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 3.2 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.08 mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
€12,90
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 20 mm HSS-Co5 ( 4000600113 )
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 20 mm HSS-Co5 Product Description: HSS-Co5 - DIN 338 - type N - point angle 130 ° - profile ground - right-hand cutting - cross cut to DIN 1412 C - with stepped shank - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, tempered and case-hardened steels as well as stainless and acid-resistant steels - ideal for drilling larger drill diameters for all standard drills with a chuck up to 13.0 mm Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.14 mm/rev - Quality: profile ground - Shank length: 35mmFor commercial use, please observe the building regulations!
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 3.1 mm ( 4000600146 )
Mon, 10/06/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 3.1 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.08 mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
€12,90
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 2 mm ( 4000600133 )
Mon, 10/06/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 2 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.05 mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
€11,97
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 2.5 mm ( 4000600139 )
Mon, 10/06/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 2.5 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.06mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
€12,29
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 2.8 mm ( 4000600143 )
Mon, 10/06/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 2.8 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.07mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
€12,29
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 2.4 mm ( 4000600138 )
Mon, 10/06/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 2.4 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.06mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
€12,29
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 2.1 mm ( 4000600134 )
Mon, 10/06/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 2.1 mm Product Description: HSS - DIN 338 - type N - point angle 118 ° - right-hand cutting - taper ground, cross ground from Ø 2.0 mm in accordance with DIN 1412 C - the fully ground twist drill has increased concentricity - for steel, alloyed and unalloyed cast steel (up to 900 N/mm² strength), Grey cast iron, malleable cast iron, nodular cast iron and die cast iron, sintered iron, nickel silver, graphite, short-chipping aluminium alloys, brass and bronze - High-performance twist drill bit, suitable for all normal drilling work in common materials Further sizes available on request. Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.05 mm/rev - Quality: profile ground - Nominal Ø tolerance: h8For commercial use, please observe the building regulations!
€12,29
-
Ruko RUKO twist drill DIN 338 type N nominal Ø 18.5 mm HSS-Co5 ( 4000600110 )
Mon, 10/06/2025
Scope of Delivery: - Twist drill DIN 338 type N nominal Ø 18.5 mm HSS-Co5 Product Description: HSS-Co5 - DIN 338 - type N - point angle 130 ° - profile ground - right-hand cutting - cross cut to DIN 1412 C - with stepped shank - the fully ground twist drill has increased concentricity - for unalloyed and alloyed steels (up to 1100 N/mm² strength), hot and cold work steels, tempered and case-hardened steels as well as stainless and acid-resistant steels - ideal for drilling larger drill diameters for all standard drills with a chuck up to 13.0 mm Technical Data: - Cutting direction: right-hand cutting - Feed rate in steel up to 800 N: 0.14 mm/rev - Quality: profile ground - Shank length: 35mmFor commercial use, please observe the building regulations!
€37,08
-
Ruko RUKO Spiralbohrer DIN 338 Typ N Nenn-Ø 18,5 mm ( 4000600090 )
Lieferumfang:Spiralbohrer DIN 338 Typ N Nenn-Ø 18,5 mmProduktbeschreibung:HSS · DIN 338 · Typ N · Spitzenwinkel 118 ° · profilgeschliffen · rechtsschneidend · Kreuzanschliff nach DIN 1412 C · mit abgesetztem Schaft · der komplett geschliffene Spiralbohrer verfügt über eine erhöhte Rundlaufgenauigkeit · für Stahl, Stahlguss legiert und unlegiert (bis 900 N/mm² Festigkeit), Grau-, Temper-, Sphäro- und Druckguss, Sintereisen, Neusilber, Graphit, kurzspanende Aluminiumlegierungen, Messing und Bronze · Ideal geeignet zum Bohren größerer Bohrdurchmesser für alle gängigen Bohrmaschinen mit einem Spannfutter bis 13,0 mm Technische Daten: Schneidrichtung: rechtsschneidend Vorschub in Stahl bis 800 N: 0,14mm/U Qualität: profilgeschliffen Schaftlänge: 35mm
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"