Neueste Artikel
-
RIDGID RIDGID ratchet pipe cutter Autofeed (TM) 3 - 16 mm ( 8000443054 )
Thu, 10/16/2025
Scope of Delivery: - Ratchet pipe cutter Autofeed ™ 3 - 16 mm - For spare cutting wheel see art. no. 4000 785 017, only art. no. 4000 801 016 with ratchet handle Product Description: 2 in 1 - for use in confined working areas - for small diameter pipes made of hard and soft copper, aluminium and plastic - grooved rollers for cuts close to flares Technical Data: - Area of application: Cu, Al, Ku.For commercial use, please observe the building regulations!
€33,72
-
RIDGID RIDGID ratchet pipe cutter Autofeed (TM) 6 - 28 mm ( 8000443052 )
Thu, 10/16/2025
Scope of Delivery: - Ratchet pipe cutter Autofeed ™ 6 - 28 mm - For spare cutting wheel see art. no. 4000 785 017, only art. no. 4000 801 016 with ratchet handle Product Description: 2 in 1 - for use in confined working areas - for small diameter pipes made of hard and soft copper, aluminium and plastic - grooved rollers for cuts close to flares Technical Data: - Area of application: Cu, Al, Ku.For commercial use, please observe the building regulations!
€46,18
-
PFERD PFERD workshop file DIN 7261 length 150 mm cross-section 16 x 4 mm ( 8000436001 )
Thu, 10/16/2025
Scope of Delivery: - Workshop file DIN 7261 Length 150 mm Cross-section 16 x 4 mm Product Description: flat blunt - with ergonomic file handle - shape A - rectangular file with cut on three sides - one side uncut - for processing right-angled geometries - also suitable for bronze, copper, brass and zinc Technical Data: - Handle: FH 3 - Drive type: Manual use - Application recommendation: Use the files universally for various applications in the workshop. - Machinable materials: Grey/spheroidal cast iron (GG/GJL, GGG/GJS), zinc, steel, cast steel, aluminium, copper, cast steel, bronze, brass, steels up to 1,200 N/mm² ( - Machining tasks: Surface processing, rounding, finishing, deburring, chamfering, edge processing (chamfering, rounding) - Width: 16mm - Note: PFERDERGONOMICS recommends the ergonomic file handle for comfortable working. - Height: 4mm - PFERD type: 1112 - Advantages: Consistently high removal rate from the tip to the tang. Long service life. Application-orientated design.For commercial use, please observe the building regulations!
€14,03
-
PFERD PFERD cutting disc PSF CHOP STEELOX D400x3.8mm straight ( 8000435716 )
Thu, 10/16/2025
Scope of Delivery: - Cutting disc PSF CHOP STEELOX D400x3.8mm straight Product Description: very sharp tool in hardness K with a centre mesh - for aggressive and low-burr cutting - Advantages: Long tool life, fast cutting, less side friction - for universal cutting tasks - excellent cutting results on drive machines up to 3 KW power - cutting of solid material, profiles and pipes - 25.4 mm Ø bore Technical Data: - nanFor commercial use, please observe the building regulations!
€116,94
-
PFERD PFERD Cutting disc PSF CHOP STEELOX D350x2.8mm straight ( 8000435715 )
Thu, 10/16/2025
Scope of Delivery: - Cutting disc PSF CHOP STEELOX D350x2.8mm straight Product Description: very sharp tool in hardness K with a centre mesh - for aggressive and low-burr cutting - Advantages: Long tool life, fast cutting, less side friction - for universal cutting tasks - excellent cutting results on drive machines up to 3 KW power - cutting of solid material, profiles and pipes - 25.4 mm Ø bore Technical Data: - nanFor commercial use, please observe the building regulations!
€79,00
-
PFERD PFERD cutting disc SG STEEL D150x1.6mm straight ( 8000435552 )
Thu, 10/16/2025
Scope of Delivery: - Cutting disc SG STEEL D150x1.6mm straight Product Description: for processing steel with high cutting performance and maximum tool life - for cutting sheet metal, profiles and solid material - bore 22.23 mm Ø Technical Data: - nanFor commercial use, please observe the building regulations!
€90,56
-
PFERD PFERD backing pad H-GT Ø 125 mm ( 8000435396 )
Thu, 10/16/2025
Scope of Delivery: - Backing pad H-GT Ø 125 mm Product Description: High-performance backing pad with a long service life thanks to abrasion-resistant, glass fibre-reinforced plastic - particularly cool grinding due to radial cooling fins and high removal rate of the fibre discs thanks to a stable, rigid design Technical Data: - Drive type: Angle grinder, cordless angle grinder - Application recommendation: Use fibre discs in accordance with ISO 15636 with backing pad on standard angle grinders. - Ordering information: The matching clamping nut is supplied. - Suitable for Ø: 125mm - PFERD type: H-GT 125 - Safety instructions: The maximum permissible peripheral speed is 80 m/s. For safety reasons, the specified maximum permissible speed must never be exceeded.For commercial use, please observe the building regulations!
€30,10
-
PFERD PFERD backing pad GT Ø 125 mm ( 8000435392 )
Thu, 10/16/2025
Scope of Delivery: - Backing pad GT Ø 125 mm Product Description: with clamping nut - for optimum contour adjustment due to high flexibility Technical Data: - Drive type: Cordless angle grinder, angle grinder - Application recommendation: Use fibre discs in accordance with ISO 15636 with backing pad on standard angle grinders. - Ordering information: The matching clamping nut is supplied. - Suitable for Ø: 125mm - PFERD type: GT 125 - Safety instructions: The maximum permissible peripheral speed is 80 m/s. For safety reasons, the specified maximum permissible speed must never be exceeded.For commercial use, please observe the building regulations!
€25,45
-
PFERD PFERD Schleifhülse KSB D22xB20mm20 mm Körnung 150 ( 8000433756 )
Lieferumfang:Schleifhülse KSB D22xB20mm20 mm Körnung 150Produktbeschreibung:Korund A · für den universellen Einsatz von Grob- bis Feinschliff · Lieferung ohne Gummiträger Technische Daten: Antriebsart: Biegwellenantrieb, Geradschleifer Anwendungsempfehlung: Für einen sicheren Sitz der Schleifhülse die Mindestdrehzahl des Schleifhülsenträgers einhalten. Für beste Leistung bei einer empfohlenen Schnittgeschwindigkeit von 20-30 m/s einsetzen. Für den Werkstoff geeignetes Schleiföl verwenden, um die Standzeit und Schleifleistung der Werkzeuge deutlich zu erhöhen. Für einen leichten Wechsel der Schleifhülsen diese unter leichter Rechtsdrehung auf- und abziehen. Dabei den Schleifhülsenträger in den Werkzeugantrieb eingespannt lassen. Bearbeitbare Werkstoffe: Grau-/Sphäroguss (GG/GJL, GGG/GJS), Aluminium, Temperguss, Messing, Bronze, Stahlguss, Kobaltbasislegierungen, Faserverstärkte Duroplaste (GFK, CFK), Gehärtete, vergütete Stähle über 1.200 N/mm² ( 54 HRC, Stähle bis 1.200 N/mm² (< 38 HRC), Thermoplaste, Kupfer Bearbeitungsaufgaben: Schweißnahtbearbeitung, Stufenweises Feinschleifen, Entgraten, Egalisieren, Aufrauen, Flächenbearbeitung, Kantenbearbeitung, Schärfen Bestellhinweise: Schleifhülsenträger bitte separat bestellen. Ø Innen: 22mm RPM, opt., bis: 26000RPM RPM, opt., von: 18000RPM Sicherheitshinweise: Die maximal zulässige Umfangsgeschwindigkeit beträgt 30 m/s. Die angegebene maximal zulässige Drehzahl darf aus Sicherheitsgründen nie überschritten werden. Schleifhülsen nicht über den Schleifhülsenträger überstehen lassen. Vorteile: Sicherer Sitz der Schleifhülse auf dem Schleifhülsenträger durch Ausdehnen des Trägers im Einsatz. Höchste Wirtschaftlichkeit durch besonders hohen Materialabtrag und hohe Aggressivität des Schleifmittels. Herausragende Standzeit durch spezielles Fertigungsverfahren – auch unter härtesten Einsatzbedingungen.
-
PFERD PFERD round brush RBG Ø 125 mm wire thickness 0.5 mm ( 8000433119 )
Thu, 10/16/2025
Scope of Delivery: - Round brush RBG Ø 125 mm wire thickness 0.5 mm Product Description: knotted wire - aggressive brush - suitable for heavy-duty brushing work in metal construction such as descaling, derusting, deburring, cleaning weld seams and removing adhesive residue - 22.2 mm Ø hole Technical Data: - nanFor commercial use, please observe the building regulations!
€24,83
-
PFERD PFERD round brush RBG Ø 115 mm wire thickness 0.5 mm ( 8000433118 )
Scope of Delivery: - Round brush RBG Ø 115 mm wire thickness 0.5 mm Product Description: knotted wire - aggressive brush - suitable for heavy-duty brushing work in metal construction such as descaling, derusting, deburring, cleaning weld seams and removing adhesive residue - 22.2 mm Ø hole Technical Data: - nanFor commercial use, please observe the building regulations!
-
PFERD PFERD Rundbürste RBG Ø 115 mm Drahtstärke 0,5 mm ( 8000433110 )
Lieferumfang:Rundbürste RBG Ø 115 mm Drahtstärke 0,5 mmProduktbeschreibung:gezopfter Draht · aggressiv arbeitende Bürste · für schwere Bürstarbeiten im Metallbau wie Entzundern, Entrosten, Entgraten, Putzen von Schweißnähten und Entfernen von Kleberresten geeignet · Bohrung 22,2 mm Ø Technische Daten: Antriebsart: Winkelschleifer, Biegwellenantrieb, Geradschleifer Anwendungsempfehlung: Bitte beachten Sie die empfohlenen Drehzahlen. Für optimale Ergebnisse auf leistungsstarken Winkelschleifern einsetzen. Bearbeitbare Werkstoffe: Stahl, Stahlguss, Gusseisen Bearbeitungsaufgaben: Kehlnahtbearbeitung, Schweißnahtbearbeitung, Wurzelnahtbearbeitung, Entgraten, Reinigen, Entrosten, Oxydschichten entfernen, Entlacken, Entzundern Besatzmaterial: Stahldraht (ST) Breite: 12mm RPM, opt., bis: 12500RPM RPM, opt., von: 6300RPM Verpackungen: POS-Verpackung Vorteile: Aggressiver Bürsteffekt durch hohe Steifigkeit der Drahtzöpfe. Lange Standzeit durch die Verwendung von PFERD-Spezialdraht.
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"