Direkt ist günstiger für Dich!

Wusstest du, dass Preisvergleich-Plattformen und Suchmaschinen bei jedem Kauf fett mitverdienen? Über 20 % vom Preis gehen nur für Werbung drauf – und das zahlen am Ende alle mit. Wir sagen: Nein danke und möchten die Werbekosten lieber als Preisreduktion an Euch weitergeben!

Aus diesem Grund übermitteln wir nicht mehr unseren gesamten Bestand, die Bestpreis-Angebote und Deals an die großen Plattformen und können Dir so - neben den Geschenken, BROpoints und anderen Vorteilen - wesentlich bessere Preise geben, die Du ausschließlich bei uns findest. Deswegen lohnt es sich, ohne Umwege, direkt zu uns zu kommen.

Initiative für bessere Preise und mehr Fairness im Online-Handel.

Finde hier ALLE ANGEBOTE, für die wir derzeit den Online-Bestpreis haben.

Neueste Artikel

Show previous products

Options

PFERD PFERD flap disc Z-COOL ( 4144150305 ) Ø30xH20mm grit size 80 shaft Ø 6 mm

Scope of Delivery: - 1x PFERD flap disc Ø30xH20mm grit size 80 Product Description: zirconium aluminium oxide - for machining stainless steels and high-temperature alloys - high grinding performance - no clogging of the flaps - for coarse grinding tasks with high cutting performance and cool grinding - abrasive additives in the coating achieve a significantly higher stock removal rate, prevent clogging and result in cooler grinding - shank Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Straight grinder, flexible shaft drive - Application recommendation: Increasing the cutting speed results in a slightly finer surface. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be processed, the coarser the surface (when using , An increase in the stock removal rate should be achieved by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. - Machinable materials: Titanium, copper, steels up to 1,200 N/mm² ( 54 HRC, hardened, tempered steels over 1,200 N/mm² (For commercial use, please observe the building regulations!).For commercial use, please observe the building regulations!

Read more less

Pre-order
€12,03

Options
PFERD PFERD File rasp DIN 7261 ( 4000840388 ) Length 200 mm Cross-section 20 x 5 mm 2K-Ergo

Wed, 11/26/2025

Scope of Delivery: - 1x PFERD file rasp length 200 mm cross-section 20 x 5 mm Product Description: flat blunt - with ergonomic file handle - shape A - rectangular file with different cuts on both flat sides - cross cut on the front for roughing - rasp cut on the back for rasping - one carved edge - for deburring, creating openings, surface finishing and edge finishing of steel, non-ferrous metal (soft), wood and plastic - comfortable grip - file does not roll away Technical Data: - Handle: 2K-Ergo - Length: 200 mm - Cross section: 20 x 5 mm - Cut: cross cut / rasp cut - Material suitability aluminium: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material suitability wood: very suitable - Material suitability plastic: very well suitedFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€18,95
Options

PFERD PFERD flap disc ( 8000429928 ) Ø 125 mm grit size 120 / 240 F

Scope of Delivery: - 1x PFERD flap disc Ø 125 mm grit size 120 / 240 F Product Description: Ceramic grain CO-COOL - for aluminium - bore 22.23 mm Ø Technical Data: - Drive type: Cordless angle grinder, angle grinder - Application recommendation: For best performance, use at a recommended cutting speed of 30-35 m/s. - Machinable materials: Stainless steel (INOX), brass, bronze, cast steel, cobalt-based alloys, copper, fibre-reinforced thermosets (GRP, CFRP), zinc, nickel-based alloys (e.g. Inconell and Hasteloy), aluminium, steel materials with a hardness > 54 HRC, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Pre-order
€103,78

Options
PFERD PFERD flap disc ( 8000429784 ) Ø80xH30mm grit 120 shank Ø 6 mm

Wed, 11/26/2025

Scope of Delivery: - 1x PFERD flap disc Ø80xH30mm grit size 120 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Flexible shaft drive, straight grinder - Application recommendation: Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. An increase in stock removal rate should be achieved by using a coarser grit and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be processed, the coarser the surface (when using , Use a suitable grinding oil for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. - Machinable materials: Steels up to 1,200 N/mm² ( 54 HRC, stainless steel (INOX) - Machining tasks: Levelling, surface processing, structuring (matting, line matting and satin finishing), fine grinding in stages, weld seam processing, deburring - Width: 30mm - Note: PFERDERGONOMICS recommends flap discs in order to sustainably reduce the vibration and noise generated during use and to improve working comfort. - Length, shaft: 40mm - RPM, opt.: 4800RPM - Safety instructions: For safety reasons, the specified maximum permissible speed must never be exceeded. The contact pressure must be significantly reduced if the specified optimum speed is exceeded. Safety is only guaranteed if the clamping length is at least 15 mm and the specified maximum speed is not exceeded with open shank lengths. - Advantages: Consistently high material removal over the entire service life, as new, aggressive abrasive is constantly released. Optimum contour adaptation due to high flexibility. Can be used very close to edges and at angles thanks to the flat cast core design. - Grit size: 120 - Max. speed: 9500 min-¹ - Abrasive: Aluminium oxide A - Material suitability Aluminium: limited suitability - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material: Aluminium - Ø: 80 mm - Height: 30 mm - Material suitability plastic: limited suitabilityFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€15,02
PFERD PFERD flap disc ( 8000429748 ) Ø60xH30mm grit 40 shank Ø 6 mm

Wed, 11/26/2025

Scope of Delivery: - 1x PFERD flap disc Ø60xH30mm grit size 40 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Flexible shaft drive, straight grinder - Application recommendation: Use at a recommended cutting speed of 15-20 m/s for best performance. This achieves an ideal compromise between stock removal rate, surface quality, temperature load on the workpiece and tool wear. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be machined, the coarser the surface (when using , An increase in the stock removal rate should be achieved by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. - Machinable materials: Aluminium, malleable cast iron, brass, grey/spheroidal cast iron (GG/GJL, GGG/GJS), hardened, tempered steels over 1,200 N/mm² ( 54 HRC, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€13,07
Options

PFERD PFERD flap disc ( 8000429750 ) Ø60xH40mm grit 120 shank Ø 6 mm

Scope of Delivery: - 1x PFERD flap disc Ø60xH40mm grit size 120 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Straight grinder, flexible shaft drive - Application recommendation: An increase in stock removal rate should be achieved by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure makes the surface slightly coarser. The softer the material to be machined, the coarser the surface (when using , For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. Use a suitable grinding oil for the material to significantly increase the service life and grinding performance of the tools. - Machinable materials: Grey/spheroidal cast iron (GG/GJL, GGG/GJS), aluminium, malleable cast iron, brass, copper, hardened, tempered steels over 1,200 N/mm² ( 54 HRC, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Pre-order
€14,02

Options
PFERD PFERD flap disc ( 8000429699 ) Ø40xH20mm grit 240 shank Ø 6 mm

Wed, 11/26/2025

Scope of Delivery: - 1x PFERD flap disc Ø40xH20mm grit 240 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Flexible shaft drive, straight grinder - Application recommendation: Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. An increase in removal rate should be achieved by using a coarser grit and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. Use a suitable grinding oil for the material to significantly increase the service life and grinding performance of the tools. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be machined, the coarser the surface (when using - Machinable materials: Steel materials with a hardness > 54 HRC, aluminium, malleable cast iron, brass, cast steel, copper, grey/spheroidal cast iron (GG/GJL, GGG/GJS), stainless steel (INOX), steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€11,89
PFERD PFERD flap disc ( 8000429754 ) Ø60xH40mm grit size 80 shank Ø 6 mm

Wed, 11/26/2025

Scope of Delivery: - 1x PFERD flap disc Ø60xH40mm grit size 80 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Straight grinder, flexible shaft drive - Application recommendation: Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be machined, the coarser the surface (when using , An increase in the stock removal rate should be achieved by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. - Machinable materials: Grey/spheroidal cast iron (GG/GJL, GGG/GJS), aluminium, malleable cast iron, brass, hardened, tempered steels over 1,200 N/mm² ( 54 HRC, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€14,02
PFERD PFERD flap disc ( 8000429667 ) Ø25xH25mm grit 60 shank Ø 6 mm

Wed, 11/26/2025

Scope of Delivery: - 1x PFERD flap disc Ø25xH25mm grit size 60 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Straight grinder, flexible shaft drive - Application recommendation: Increasing the cutting speed results in a slightly finer surface. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be processed, the coarser the surface (when using , For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface quality, temperature load on the workpiece and tool wear. The stock removal rate should be increased by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. - Machinable materials: Malleable cast iron, brass, grey/spheroidal cast iron (GG/GJL, GGG/GJS), steels up to 1,200 N/mm² ( 54 HRC, copper, stainless steel (INOX), hardened, tempered steels over 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€11,32
PAFFRATH PAFFRATH Henkellocheisen ( 4000814425 ) Hole-Ø 25 mm

Wed, 11/26/2025

Scope of Delivery: - 1x PAFFRATH Henkellocheisen hole Ø 25 mm Product Description: DIN 7200 A - for punching out cardboard, leather, rubber and other soft materials - strong drop-forged shape - cutting edge hardened and tempered to 48 - 56 HRC - tapered inside and polished - shaft machined and resistant powder-coated Technical Data: - Weight: 350g - Shank: red - Standard: DIN 7200 Form A - Hole Ø: 25 mm - Brand: PAFFRATHPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€21,60
PFERD PFERD flap disc ( 8000429700 ) Ø40xH20mm grit 40 shank Ø 6 mm

Wed, 11/26/2025

Scope of Delivery: - 1x PFERD flap disc Ø40xH20mm grit size 40 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Flexible shaft drive, straight grinder - Application recommendation: Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. An increase in stock removal rate should be achieved by using a coarser grit and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be machined, the coarser the surface (when using , For best performance, use at a recommended cutting speed of 15-20 m/s). This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. Use a suitable grinding oil for the material to significantly increase the service life and grinding performance of the tools. - Machinable materials: Hardened, tempered steels over 1,200 N/mm² ( 54 HRC, malleable cast iron, aluminium, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!).For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€11,89
PELI PELI LED headlamp 2765Z0 ( 4000876559 ) 4.5 V for batteries 3 x AAA Micro

Wed, 11/26/2025

Scope of Delivery: - 1x PELI LED headlamp 4.5 V for batteries 3 x AAA Micro Product Description: explosion-proof - 3 positioned LEDs for high, low, down and flashing modes - polymer construction makes it extremely water/weather resistant to IP54 and can be tilted at a 45-degree angle - up to 14 hours running time with additional battery charge indicator Technical Data: - for batteries: 3 x AAA Micro - Light duration: 14 h - Luminous flux: 141 lm - Protection class: IP54 - Brand: PELI - Battery voltage: 4.5 VNote on the disposal of batteries and rechargeable batteries As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the Battery Act (BattG) to draw your attention to the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

1 - 2 business days
€84,13