Scope of Delivery:
- 1x Makita DSS 611 cordless circular saw
- 1x rip fence
- 1x Hexagon socket assembly tool
- 1x dust extraction nozzle
- 1x Makita HM saw blade 165 mm
- 1x Makita BL 1840 B 18 V 4.0 Ah rechargeable battery
- 1x Makita Makpac
- 1x universal insert
- without charger
Product Description:
The powerful Makita DSS 611 is an extremely powerful hand-held circular saw with a 4-pole motor in a very compact design. In addition, the saw table is made of aluminium and can be adjusted so that angles of up to 50° degrees can be cut. The cutting depth can also be adjusted, which can be easily read off the cutting depth indicator. Another very useful feature is the option of attaching a suction unit, which can be attached to the suction adapter supplied with the device.
Technical Data:
- Manufacturer: Makita
- Manufacturer's designation: DSS 611
- Voltage: 18 V
- Revolutions: Max. 3,700 1/min
- Cutting depth: at 0° 0 - 57 mm
- Cutting depth: at 45° 0 - 40 mm
- Cutting depth: at 50° 0 - 36 mm
- Saw blade bore: 20 mm
- Saw blade diameter: Ø 165 mm
- Weight: 3.0 kg
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Scope of Delivery:
- 1x Makita DHS 680 cordless circular saw
- 1x Makita carbide saw blade 165 mm 24T ( P-05256 )
- 1x Makita rip fence ( 164095-8 )
- 1x dust extraction nozzle
- 1x assembly tool
- 1x Makita BL 1840 B 18 V 4.0 Ah battery
- 1x Makita Makpac case
- 1x suitable insert
- without charger
Product Description:
The Makita DHS 680 18V Li-Ion cordless circular saw impresses with its powerful brushless motor (brushless) and automatic speed regulation thanks to Automatic Torque Drive Technology for optimum performance for every requirement. The Makita DHS 680 is perfect for roofing work and interior work. The tool has a long service life thanks to the brushless and therefore low-wear motor technology. The cordless portable circular saw can be tilted by up to 50° and a blowing device keeps the application area clean at all times. A bright double LED ensures optimum visibility when working and a practical bracket allows the Makita DHS 680 cordless portable circular saw to be hung up.
Technical Data:
- Manufacturer: Makita
- Manufacturer's designation: DHS 680
- Battery voltage: 18 V
- Battery system: LXT
- Max. Cutting capacity 90°: 57 mm
- Max. Cutting capacity 45°: 41 mm
- Cutting capacity 50°: 37 mm
- Max. Tilt left / right: 0 / 50 °
- Idle speed: 5000 min-¹
- Battery protection system: Yes
- Weight incl. battery (EPTA): 3.0 - 3.3 kg
- Product dimensions (L x W x H): 350 x 170 x 238 mm
- Saw blade: 165 x 20 mm
- Sound power level (LWA): 105 dB(A)
- Sound pressure level (LpA): 83 dB(A)
- K-value noise: 3 dB(A)
- Vibration: ≤ 2.5 m/s²
- K-value vibration: 1.5 m/s²
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Scope of Delivery:
- 1x Makita DPB 183 cordless band saw
- 1x hexagonal pin spanner 4 mm ( 783202-0 )
- 1x band saw blade
- 2x Makita BL 1850 B 18 V 5.0 Ah battery
- 1x Makita DC 18 RC 18 V charger
Product Description:
The DPB 183 cordless band saw from Makita is very robust thanks to its stable bridge construction with aluminium frame. The saw blade of the cordless band saw can be changed quickly and without tools thanks to the quick-release fastener. The band saw is ideal for cutting pipes and profiles up to a size of 66 x 66 mm quickly and without sparks. With the adjustable band speed, optimum results can be achieved for different requirements. The brushless motor enables a compact design that makes the band saw very easy to handle. In addition, the low power consumption of the brushless motor ensures a longer running time with one battery charge. The integrated electric motor brake protects the user if the tool jams. The saw blade can be adjusted precisely and easily using a screw. An integrated LED lamp, which is located in the centre of the tool and is aimed precisely at the sawing point, ensures good visibility even in the darkest corners. The coated handle ensures a secure grip and a comfortable feel. Makita is a leading manufacturer of power tools, characterised by a long tradition and the highest quality standards.
Technical Data:
- Manufacturer: Makita
- Manufacturer's designation: DPB 183
- Battery voltage: 18 V
- Cutting capacity 400 N/mm²: 66 x 66 mm
- Max. Workpiece diameter: 66 mm
- Belt speed: 0 - 3.2 m/s
- Saw blade Ø / bore: 13 x 0.5 x 835 mm
- Sound power level (LWA): 90 dB(A)
- Sound pressure level (LpA): 80 dB(A)
- K-value noise: 3 dB(A)
- Vibration: =2.5 m/s²
- K-value vibration: 1.5 m/s²
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Scope of Delivery:
- 1x Makita DPB 183 cordless band saw
- 1x hexagonal pin spanner 4 mm ( 783202-0 )
- 1x band saw blade
- 1x Makita BL 1830 B 18 V 3.0 Ah battery
- 1x Makita DC 18 RC 18 V charger
Product Description:
The DPB 183 cordless band saw from Makita is very robust thanks to its stable bridge construction with aluminium frame. The saw blade of the cordless band saw can be changed quickly and without tools thanks to the quick-release fastener. The band saw is ideal for cutting pipes and profiles up to a size of 66 x 66 mm quickly and without sparks. With the adjustable band speed, optimum results can be achieved for different requirements. The brushless motor enables a compact design that makes the band saw very easy to handle. In addition, the low power consumption of the brushless motor ensures a longer running time with one battery charge. The integrated electric motor brake protects the user if the tool jams. The saw blade can be adjusted precisely and easily using a screw. An integrated LED lamp, which is located in the centre of the tool and is aimed precisely at the sawing point, ensures good visibility even in the darkest corners. The coated handle ensures a secure grip and a comfortable feel. Makita is a leading manufacturer of power tools, characterised by a long tradition and the highest quality standards.
Technical Data:
- Manufacturer: Makita
- Manufacturer's designation: DPB 183
- Battery voltage: 18 V
- Cutting capacity 400 N/mm²: 66 x 66 mm
- Max. Workpiece diameter: 66 mm
- Belt speed: 0 - 3.2 m/s
- Saw blade Ø / bore: 13 x 0.5 x 835 mm
- Sound power level (LWA): 90 dB(A)
- Sound pressure level (LpA): 80 dB(A)
- K-value noise: 3 dB(A)
- Vibration: =2.5 m/s²
- K-value vibration: 1.5 m/s²
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Scope of Delivery:
- 1x Milwaukee M18 FCHSC cordless chainsaw
- 1x saw chain
- 1x chain guard
- 1x oil 80 ml
- 1x assembly tool
- without battery, without charger
Product Description:
The Milwaukee M18 FCHSC cordless chainsaw has almost the same power as a petrol chainsaw. Furthermore, the saw has a chain speed of 12.4 m/s. Thanks to the new Fuel TM technology, this allows the speed to be maintained so that the chainsaw does not come to a standstill. The bar length of 30 cm makes sawing easier, even in confined spaces. The latest generation brushless motor offers powerful performance and, together with the high-quality battery, the Milwaukee chainsaw promises a long service life. Up to 150 cuts in 10 x 10 cm softwood are easily possible with a 12.0 Ah battery (not included). The speed regulator inside the machine ensures full control of the chainsaw. The metal claw fence facilitates leverage in the wood. Thanks to the loss-free container, simple chain lubrication is no problem. In addition, the M18 FCHSC has a fill level indicator that is easy to read at all times. The Milwaukee M18 cordless chainsaw is ideal for gardening work and is 100 % system-compatible with the Milwaukee M18 product range. The mounting tool is installed under the cordless chainsaw, making it quick and easy to change the saw blade.
Technical Data:
- Manufacturer: Milwaukee
- Manufacturer's designation: M18 FCHSC
- Voltage: 18 Volt
- Chain speed: 12.4 m/s
- Bar length: 30 cm
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Scope of Delivery:
- 1x Makita DSS 611 cordless circular saw
- 1x Makita BL 1860 B 18 V 6.0 Ah rechargeable battery
- 1x rip fence
- 1x Hexagon socket assembly tool
- 1x dust extraction nozzle
- 1x Makita HM saw blade 165 mm
- without charger
Product Description:
The lightweight and powerful cordless circular saw is suitable for longitudinal and cross cuts as well as mitre cuts with angles in wood. It can cut MDF, PVC or composite panels and aluminium sheets up to 4 millimetres thick. The cutting depth is sufficient for door or window construction, for example. The stable die-cast aluminium base plate can be adjusted so that angles of up to 50° can be cut. Another very useful feature is the option of attaching a suction unit, which can be attached to the suction adapter supplied with the device. The professional in commercial use as well as the quality-conscious craftsman gets a circular saw that fulfils its tasks quickly and cleanly over a long period of time.
Technical Data:
- Voltage: 18 V
- Saw blade diameter: Ø 165 mm
- Saw blade bore: 20 mm
- Max. Idle speed: 3700 rpm
- Cutting depth at 50°: 0-36 mm
- Cutting depth at 45°: 0-40 mm
- Cutting depth at 0°: 0-57 mm
- Weight: 3.0 kg
- Sound pressure level: 78 dB (A)
- Deviation (K): 3 dB (A)
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Package contents:
- 1x Festool Table Saw TKS 80 EBS
- 1x Suction set
- 1x Open-end spanner SW 23
- 1x Open-end spanner SW 50
- 1x HW Universal saw blade W40
- 1x Allen key SW 5
- 1x Cartridge KT TKS 80
- 1x Sliding stick
- 1x Angled stop
Product description:
The TKS 80 EBS table saw from Festool ensures maximum safety in the workshop. Its built-in sensitive SawStop technology ensures greater safety when sawing non-conductive metals. The saw will stop immediately upon skin contact and disappear into the work surface. The cartridge releases a pre-tensioned spring and shoots an aluminium block into the saw blade. The SawStop technology can also be switched off, so that conductive materials can then be sawn. After release, the cartridge can be replaced in a few simple steps. Every year there are about 4000 injuries when using a circular saw. This corresponds to 16 injuries per working day. Approximately 26 % of serious accidents are then covered by an accident pension. These figures should make every user think, and one should invest in his or her highest asset, the body and its integrity. The TKS 80 EBS can be used very flexibly. Whether a cutting height of 80 mm, the extendable working length or the longitudinal and crosscut fence, all this ensures great flexibility when working. The angle scale with locking points and fine adjustment is perfectly suited for crosscutting and longitudinal cuts. There is less tearing on the workpiece thanks to the left-hand swivelling of the saw blade. Crosscuts up to a width of 820 mm with sliding table are possible without any problems at a cutting depth of 20 mm. Longitudinal cuts up to a cutting height of 80 mm and a width of 600 mm with widening are also no problem. Moreover, the CLEANTEC extraction socket ensures a clear visibility and low-dust working. The side-mounted tool garage provides space for saw blades, cartridges and the sliding stick. Festool is a premium manufacturer of power tools, the high quality standards and the sophisticated tool concepts are what make this brand stand out.
Technical specifications:
Manufacturer: Festool
Manufacturer number: 575781
Power consumption 2 200 W
Idle speed: 1700 - 3500 min-¹
Saw blade Ø: 254 mm
Cutting height 90°/45°: 80/56 mm
Inclination: -2 / 47 °
Table dimensions: 690 x 580 mm
Table height folded: 385 mm
Table height folded out: 900 mm
Dust extraction connection Ø: 27/36 mm
Weight: 37 kg
Drive type: Mains
Sawing: A-weighted sound pressure level Lp: 87 dB(A)
Sawing: A-weighted sound power level Lw: 102 dB(A)
Sawing: uncertainty (noise) K: 3 dB
Scope of Delivery:
- 1x Metabo KS 18 LTX 57 circular saw ( 601857840 )
- 1x carbide circular saw blade (18 teeth)
- 1x rip fence
- 1x hexagon spanner
- 2x Metabo Li-Power battery pack 5.2 Ah ( 625592000 )
- 1x Metabo ASC 55 charger ( 627044000 )
- 1x Metabo Metaloc
Product Description:
The cordless portable circular saw is suitable for sawing wood, plastics or similar materials. The machine is not intended for plunge cuts. The lightweight but powerful saw has a high-quality finish and sits comfortably in the hand. The aluminium base plate can be used directly on Metabo guide rails, but also on those of other manufacturers. The tool also scores with its ease of use: the saw blade can be changed easily; the cutting angle can be adjusted up to 50 degrees using a precise scale. Clever details such as a locking point at 45 degrees and a thumb rest for counter-holding are impressive for demanding work such as precise bevel cuts. The cut indicator is clearly visible for sawing after rips. The handle is equipped with a non-slip softgrip surface for a secure grip. The cordless portable circular saw is a versatile tool for roofers, woodworkers and drywallers and for anyone who wants to saw on the move without the hassle of a cable. The batteries and charger are 100% compatible with all 18 V machines and chargers from CAS (Cordless Alliance System) partners.
Technical Data:
- Manufacturer: Metabo
- Manufacturer's designation: KS 18 LTX 57
- Manufacturer number: 601857700
- Battery voltage: 18 V
- Saw blade Ø: 165 mm
- Bore: 20 mm
- Idle speed: 4600 rpm
- Max. Cutting speed: 40 m/s
- Swivelling range from/to: 0/+50°
- Cutting depth adjustable: 0-57 mm
- Max. cutting depth at 90°: 57 mm
- Max. cutting depth at 45°: 43 mm
- Max. Basic body thickness of the saw blade: max. 1.7 mm
- Max. Max. cutting edge width of the saw blade: max. 2.6 mm
- Sound pressure level: 92 dB(A)
- Sound power level: 103 dB(A)
- Uncertainty (K): 3 dB(A)
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Scope of Delivery:
- 1x Makpac size 4 ( 821552-6 )
- 1x Specialised saw blade 190x30x24T (B-64191)
- 1x rip fence ( 164095-8 )
- 1x dust extraction nozzle ( 196520-1 )
- 1x 6-KT pin spanner 6mm ( 783204-6 )
- 1x DC 18 RD charger 7.2V - 18V for 2 Li-Ion batteries ( 196933-6 )
- 2x BL 1860 B battery with 18V 6.0 Ah and LED charge level indicator ( 197422-4 )
Product Description:
This practical hand-held circular saw from Makita has built-in ADT (Automatic Torque Drive Technology). During operation, the speed is automatically regulated to achieve optimum performance depending on requirements. Thanks to the indicator light coupled with ADT, you are warned in good time before the machine is overloaded as soon as it starts flashing. The DHS 782 also has a new base plate made of lightweight magnesium, which can be coupled directly to a guide rail. With this device, you always have an optimised view thanks to the change of position of the front handle. There is also an electric motor brake. The brushless motor ensures greater endurance, a longer service life and a more compact design. The tilt is adjustable up to 48 degrees. The XPT - Xtreme Protect Technology offers optimum protection against dust and splash water, even under tough conditions. The bright double LED ensures a good view of the scribing line.
Technical Data:
- DHS 782 ZJ:
- Manufacturer number: DHS782ZJ
- Idle speed: 6,000 min-1
- Cutting capacity 0°: 62.5 mm
- Cutting capacity 45°: 46 mm
- Cutting capacity 48°: 43.5 mm
- Saw blade Ø / bore: 190/30 mm
- Battery voltage: 2x18 V
- Dimensions (LxWxH) mm: 348 x 210 x 290
- Weight: 3950 g
- Sound pressure level (LpA): 93 dB(A)
- Sound power level (LWA): 104 dB(A)
- K-value noise: 3 dB(A)
- Vibration sawing wood: 2.5 m/s²
- Vibration sawing metal: 2.5 m/s²
- K-value vibration: 1.5 m/s²
- BL 1860 B 18V 6.0 Ah battery:
- Manufacturer number: 197422-4
- Battery capacity: 6.0 Ah
- Battery voltage: 18 V
- Battery weight: 670 g
- DC 18 RD double charger:
- Manufacturer number: 196933-6
- Battery charging times Li-Ion 18 V - charging time for 2 batteries
- 5.0 Ah BL1850: 45 min.
- 4.0 Ah BL1840: 36 min.
- 3.0 Ah BL1830: 22 min.
- 1.5 Ah BL1815: 15 min.
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Scope of Delivery:
- 1x Makita DUC 353 cordless chainsaw
- 1x saw bar 35 cm 1.1mm 3/8"
- 1x saw chain 35 cm 1.1mm 3/8" K18
- 4x Makita BL 1860 18 V 6.0 Ah Li-Ion battery
- 1x Makita DC 18 RD dual charger for Li-Ion batteries
Product Description:
The DUC 353 chainsaw impresses with its powerful 36-volt drive and extremely compact design. The universally applicable saw is very environmentally friendly thanks to its battery operation and the very fast chain speed guarantees fast and clean work progress. The brushless motor is virtually maintenance-free and the compact, robust, dirt and splash-proof housing ensures a long service life. The optimised weight distribution, automatic chain lubrication and automatic battery indicator ensure a high level of comfort, while the electric motor brake and kickback protection make working with the DUC 353 chainsaw extremely safe. Important: "Top-handle" chainsaws are only to be used by qualified specialists and only for work that is not carried out on the ground and are not intended for use by unqualified end users. According to EN ISO 11681-2 (2012), 5.1.3
Technical Data:
- Chain speed: 0 - 20 m/s
- Cutting length: 35 cm
- Chain pitch 3/8"
- Drive link thickness: 1.1 mm
- Oil tank: 200 ml
- Battery voltage: 2x 18 V
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
Scope of Delivery:
- 1x Makita DUC 122 Z 18 V Li-Ion cordless chainsaw solo tool
- 1x Makita BL1850 B 5.0 Ah Li-Ion battery
- 1x Makita DC18RC charger for 18 V batteries
- 1x saw chain oil 100ml
- 1x chain round file 4.0mm
Product Description:
The handy DUR 122 cordless chainsaw from Makita impresses with its powerful motor for high chain speed and compact housing, making it easier to work in hard-to-reach places. The saw has automatic chain lubrication, safety is guaranteed by a motor brake and the saw chain stops within 0.5 seconds. Handling is maximised by the rubber pads inserted in the handle, and the chain tension can be adjusted and the saw chain changed without tools. Top-handle chainsaw - only authorised for professional users with special training!
Technical Data:
- Voltage: 18 V
- Weight: 2.6 kg
- Chain speed: 300 m/min
- Cutting length: 115 mm
- Saw chain pitch: 1/4"
- Oil tank: 80 ml
- Battery capacity: 5.0 Ah
- For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
