Accessories for Sanders
-
PFERD PFERD Handpad POLINOX ( 4144155345 ) L224xW154mm red-brown
Tue, 11/11/2025
Scope of Delivery: - 1x PFERD hand pad L224xW154mm Product Description: Suitable for ultra-fine sanding on small to large surfaces and contours as well as cleaning work on metals and paintwork using hand sanding - achieves matt and silk-matt surfaces - very open structure - optimum contour adaptation thanks to high flexibility - reaches hard-to-reach areas - can be used for wet and dry sanding Technical Data: - Colour: red-brown - Length: 224 mm - Width: 154 mm - Type: coarse - Grain size: 100 - Material suitability INOX: very suitable - Material suitability aluminium: very suitable - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material suitability paint: very suitable - Material suitability plastic: very well suitedFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€10,40
-
PFERD PFERD flap disc ( 8000429930 ) Ø 125 mm grit size 80 / 180 M
Scope of Delivery: - 1x PFERD flap disc Ø 125 mm grit size 80 / 180 M Product Description: Ceramic grain CO-COOL - for aluminium - bore 22.23 mm Ø Technical Data: - Drive type: Cordless angle grinder, angle grinder - Application recommendation: For best performance, use at a recommended cutting speed of 30-35 m/s. - Machinable materials: Fibre-reinforced thermosets (GRP, CFRP), aluminium, zinc, titanium alloys, titanium, thermoplastics, steels up to 1,200 N/mm² ( 54 HRC, stainless steel (INOX), nickel-based alloys (e.g. Inconell and Hasteloy), hardened, tempered steels over 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
-
PFERD PFERD flap disc ( 8000429929 ) Ø 125 mm grit 60 / 100 G
Scope of Delivery: - 1x PFERD flap disc Ø 125 mm grit 60 / 100 G Product Description: Ceramic grain CO-COOL - for aluminium - bore 22.23 mm Ø Technical Data: - Drive type: Angle grinder, cordless angle grinder - Application recommendation: For best performance, use at a recommended cutting speed of 30-35 m/s. - Materials that can be machined: Fibre-reinforced thermosets (GRP, CFRP), nickel-based alloys (e.g. Inconell and Hasteloy), zinc, titanium alloys, titanium, thermoplastics, steels up to 1,200 N/mm² ( 54 HRC) - Machining tasks: Deburring, fine grinding in stages, cleaning, roughening, structuring (matting, line matting and satin finishing), surface processing, weld seam processing - Width: 18mm - Ø bore: 22.23mm - RPM, opt., up to: 5300RPM - RPM, opt., from: 4600RPM - Safety instructions: For safety reasons, the specified maximum permissible speed must never be exceeded. - Advantages: Optimum contour adaptation due to high flexibility. Produces a consistently high surface quality over the entire service life, as new, sharp abrasive is constantly released. Highly economical due to high sanding performance and long service life. - Ø: 125 mm - Grit size: 60 / 100 G - Max. speed: 12200 min-¹ - Material suitability INOX: very suitable - Abrasive: CO-COOL ceramic grit - Material suitability for aluminium: very suitable - Area of application: Aluminium - Material suitability steel: very suitable - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
-
PFERD PFERD flap disc ( 8000429788 ) Ø80xH30mm grit 40 shank Ø 6 mm
Scope of Delivery: - 1x PFERD flap disc Ø80xH30mm grit size 40 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Straight grinder, flexible shaft drive - Application recommendation: An increase in stock removal rate should be achieved by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure makes the surface slightly coarser. The softer the material to be machined, the coarser the surface (when using , For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. Use a suitable grinding oil for the material to significantly increase the service life and grinding performance of the tools. - Machinable materials: Cast steel, brass, copper, grey/spheroidal cast iron (GG/GJL, GGG/GJS), hardened, tempered steels over 1,200 N/mm² ( 54 HRC, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
-
PFERD PFERD flap disc ( 8000429928 ) Ø 125 mm grit size 120 / 240 F
Scope of Delivery: - 1x PFERD flap disc Ø 125 mm grit size 120 / 240 F Product Description: Ceramic grain CO-COOL - for aluminium - bore 22.23 mm Ø Technical Data: - Drive type: Cordless angle grinder, angle grinder - Application recommendation: For best performance, use at a recommended cutting speed of 30-35 m/s. - Machinable materials: Stainless steel (INOX), brass, bronze, cast steel, cobalt-based alloys, copper, fibre-reinforced thermosets (GRP, CFRP), zinc, nickel-based alloys (e.g. Inconell and Hasteloy), aluminium, steel materials with a hardness > 54 HRC, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
-
PFERD PFERD flap disc Z-COOL ( 4144150305 ) Ø30xH20mm grit size 80 shaft Ø 6 mm
Tue, 11/11/2025
Scope of Delivery: - 1x PFERD flap disc Ø30xH20mm grit size 80 Product Description: zirconium aluminium oxide - for machining stainless steels and high-temperature alloys - high grinding performance - no clogging of the flaps - for coarse grinding tasks with high cutting performance and cool grinding - abrasive additives in the coating achieve a significantly higher stock removal rate, prevent clogging and result in cooler grinding - shank Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Straight grinder, flexible shaft drive - Application recommendation: Increasing the cutting speed results in a slightly finer surface. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be processed, the coarser the surface (when using , An increase in the stock removal rate should be achieved by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. - Machinable materials: Titanium, copper, steels up to 1,200 N/mm² ( 54 HRC, hardened, tempered steels over 1,200 N/mm² (For commercial use, please observe the building regulations!).For commercial use, please observe the building regulations!
€12,03
-
PFERD PFERD flap disc ( 8000429784 ) Ø80xH30mm grit 120 shank Ø 6 mm
Tue, 11/11/2025
Scope of Delivery: - 1x PFERD flap disc Ø80xH30mm grit size 120 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Flexible shaft drive, straight grinder - Application recommendation: Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. An increase in stock removal rate should be achieved by using a coarser grit and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be processed, the coarser the surface (when using , Use a suitable grinding oil for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. - Machinable materials: Steels up to 1,200 N/mm² ( 54 HRC, stainless steel (INOX) - Machining tasks: Levelling, surface processing, structuring (matting, line matting and satin finishing), fine grinding in stages, weld seam processing, deburring - Width: 30mm - Note: PFERDERGONOMICS recommends flap discs in order to sustainably reduce the vibration and noise generated during use and to improve working comfort. - Length, shaft: 40mm - RPM, opt.: 4800RPM - Safety instructions: For safety reasons, the specified maximum permissible speed must never be exceeded. The contact pressure must be significantly reduced if the specified optimum speed is exceeded. Safety is only guaranteed if the clamping length is at least 15 mm and the specified maximum speed is not exceeded with open shank lengths. - Advantages: Consistently high material removal over the entire service life, as new, aggressive abrasive is constantly released. Optimum contour adaptation due to high flexibility. Can be used very close to edges and at angles thanks to the flat cast core design. - Grit size: 120 - Max. speed: 9500 min-¹ - Abrasive: Aluminium oxide A - Material suitability Aluminium: limited suitability - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material: Aluminium - Ø: 80 mm - Height: 30 mm - Material suitability plastic: limited suitabilityFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€15,02
-
PFERD PFERD flap disc ( 8000429750 ) Ø60xH40mm grit 120 shank Ø 6 mm
Scope of Delivery: - 1x PFERD flap disc Ø60xH40mm grit size 120 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Straight grinder, flexible shaft drive - Application recommendation: An increase in stock removal rate should be achieved by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure makes the surface slightly coarser. The softer the material to be machined, the coarser the surface (when using , For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. Use a suitable grinding oil for the material to significantly increase the service life and grinding performance of the tools. - Machinable materials: Grey/spheroidal cast iron (GG/GJL, GGG/GJS), aluminium, malleable cast iron, brass, copper, hardened, tempered steels over 1,200 N/mm² ( 54 HRC, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
-
PFERD PFERD flap disc ( 8000429748 ) Ø60xH30mm grit 40 shank Ø 6 mm
Tue, 11/11/2025
Scope of Delivery: - 1x PFERD flap disc Ø60xH30mm grit size 40 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Flexible shaft drive, straight grinder - Application recommendation: Use at a recommended cutting speed of 15-20 m/s for best performance. This achieves an ideal compromise between stock removal rate, surface quality, temperature load on the workpiece and tool wear. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be machined, the coarser the surface (when using , An increase in the stock removal rate should be achieved by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. - Machinable materials: Aluminium, malleable cast iron, brass, grey/spheroidal cast iron (GG/GJL, GGG/GJS), hardened, tempered steels over 1,200 N/mm² ( 54 HRC, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€13,07
-
PFERD PFERD flap disc ( 8000429699 ) Ø40xH20mm grit 240 shank Ø 6 mm
Tue, 11/11/2025
Scope of Delivery: - 1x PFERD flap disc Ø40xH20mm grit 240 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Flexible shaft drive, straight grinder - Application recommendation: Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. An increase in removal rate should be achieved by using a coarser grit and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. Use a suitable grinding oil for the material to significantly increase the service life and grinding performance of the tools. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be machined, the coarser the surface (when using - Machinable materials: Steel materials with a hardness > 54 HRC, aluminium, malleable cast iron, brass, cast steel, copper, grey/spheroidal cast iron (GG/GJL, GGG/GJS), stainless steel (INOX), steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€11,89
-
PFERD PFERD flap disc ( 8000429754 ) Ø60xH40mm grit size 80 shank Ø 6 mm
Tue, 11/11/2025
Scope of Delivery: - 1x PFERD flap disc Ø60xH40mm grit size 80 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Straight grinder, flexible shaft drive - Application recommendation: Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be machined, the coarser the surface (when using , An increase in the stock removal rate should be achieved by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. - Machinable materials: Grey/spheroidal cast iron (GG/GJL, GGG/GJS), aluminium, malleable cast iron, brass, hardened, tempered steels over 1,200 N/mm² ( 54 HRC, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€14,02
-
PFERD PFERD flap disc ( 8000429700 ) Ø40xH20mm grit 40 shank Ø 6 mm
Tue, 11/11/2025
Scope of Delivery: - 1x PFERD flap disc Ø40xH20mm grit size 40 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Flexible shaft drive, straight grinder - Application recommendation: Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. An increase in stock removal rate should be achieved by using a coarser grit and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be machined, the coarser the surface (when using , For best performance, use at a recommended cutting speed of 15-20 m/s). This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. Use a suitable grinding oil for the material to significantly increase the service life and grinding performance of the tools. - Machinable materials: Hardened, tempered steels over 1,200 N/mm² ( 54 HRC, malleable cast iron, aluminium, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!).For commercial use, please observe the building regulations!
€11,89
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"