Accessories for Sanders
-
PFERD PFERD flap disc ( 8000429667 ) Ø25xH25mm grit 60 shank Ø 6 mm
Wed, 11/12/2025
Scope of Delivery: - 1x PFERD flap disc Ø25xH25mm grit size 60 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Straight grinder, flexible shaft drive - Application recommendation: Increasing the cutting speed results in a slightly finer surface. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be processed, the coarser the surface (when using , For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface quality, temperature load on the workpiece and tool wear. The stock removal rate should be increased by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. - Machinable materials: Malleable cast iron, brass, grey/spheroidal cast iron (GG/GJL, GGG/GJS), steels up to 1,200 N/mm² ( 54 HRC, copper, stainless steel (INOX), hardened, tempered steels over 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€11,32
-
PFERD PFERD flap disc POLIFAN A-COOL SG INOX+ALU ( 8000429954 ) Ø 125 mm grit size 80 flat
Wed, 11/12/2025
Scope of Delivery: - 1x PFERD flap disc Ø 125 mm grit size 80 flat Product Description: Aluminium oxide - for machining stainless steel (INOX) and aluminium - with active grinding coating - for grinding tasks to achieve a high surface quality with low heat load - particularly cool grinding on materials with poor thermal conductivity - bore 22.23 mm Ø Technical Data: - Bore: 22,23mm - Shape: flat - Ø: 125 mm - grit size: 80 - max. speed: 12200 min-¹ - Material suitability INOX: very suitable - Abrasive: Aluminium oxide - Material suitability aluminium: very suitable - Area of application: INOX/aluminium - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€70,02
-
PFERD PFERD flap disc ( 4000841610 ) Ø30xH10mm grit 60 shank Ø 6 mm
Wed, 11/12/2025
Scope of Delivery: - 1x PFERD flap disc Ø30xH10mm grit size 60 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Flexible shaft drive, straight grinder - Application recommendation: The stock removal rate should be increased by using a coarser grit and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be machined, the coarser the surface (when using , Reducing the contact pressure and the peripheral speed and adding grinding oil reduce tool wear and the temperature load on the workpiece. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. Use a suitable grinding oil for the material to significantly increase the service life and grinding performance of the tools. - Machinable materials: Steels up to 1,200 N/mm² ( 54 HRC, malleable cast iron, aluminium - Machining tasks: Weld seam processing, surface processing, structuring (matting, line matting and satin finishing), levelling, fine grinding in stages, deburring - Width: 10mm - Note: PFERDERGONOMICS recommends flap discs in order to sustainably reduce the vibration and noise generated during use and to improve working comfort. - Length, shaft: 40mm - RPM, opt.: 12000RPM - Safety instructions: For safety reasons, the specified maximum permissible speed must never be exceeded. The contact pressure must be significantly reduced if the specified optimum speed is exceeded. Safety is only guaranteed if the clamping length is at least 15 mm and the specified maximum speed is not exceeded with open shank lengths. - Advantages: Optimum contour adaptation due to high flexibility. Consistently high material removal rate over the entire service life, as new, aggressive abrasive is constantly released. Can be used very close to edges and at angles thanks to the flat cast core design. - grit size: 60 - Max. speed: 25400 min-¹ - Abrasive: Aluminium oxide A - Material suitability Aluminium: limited suitability - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Brand: PFERD - Material: Aluminium oxide - Ø: 30 mm - Height: 10 mm - Material suitability plastic: limited suitabilityPlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
€10,83
-
PFERD PFERD flap disc ( 8000429664 ) Ø25xH25mm grit 120 shank Ø 6 mm
Wed, 11/12/2025
Scope of Delivery: - 1x PFERD flap disc Ø25xH25mm grit size 120 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Straight grinder, flexible shaft drive - Application recommendation: Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure makes the surface slightly coarser. The softer the material to be processed, the coarser the surface (when using , Use a suitable grinding oil for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. The stock removal rate should be increased by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. - Machinable materials: Steel materials with a hardness > 54 HRC, cast steel, aluminium, malleable cast iron, brass, copper, grey/spheroidal cast iron (GG/GJL, GGG/GJS), stainless steel (INOX), steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€11,32
-
PFERD PFERD flap disc ( 4000843048 ) Ø30xH5mm grit size 80 shank Ø 6 mm
Wed, 11/12/2025
Scope of Delivery: - 1x PFERD flap disc Ø30xH5mm grit size 80 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Straight grinder, flexible shaft drive - Application recommendation: Use at a recommended cutting speed of 15-20 m/s for best performance. This achieves an ideal compromise between stock removal rate, surface quality, temperature load on the workpiece and tool wear. Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure makes the surface slightly coarser. The softer the material to be processed, the coarser the surface (when using , Use a suitable grinding oil for the material to significantly increase the service life and grinding performance of the tools. The removal rate should be increased by using a coarser grit and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. - Machinable materials: Brass, cast steel, stainless steel (INOX), steel materials with a hardness > 54 HRC, steels up to 1,200 N/mm² (For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€10,58
-
PFERD PFERD flap disc ( 4000841619 ) Ø40xH15mm grit 120 shank Ø 6 mm
Wed, 11/12/2025
Scope of Delivery: - 1x PFERD flap disc Ø40xH15mm grit size 120 Product Description: Aluminium oxide A - with flaps made of abrasive on backing - for universal use from coarse to fine sanding - shaft Ø 6 mm Technical Data: - Shank Ø: 6mm - Drive type: Straight grinder, flexible shaft drive - Application recommendation: Use grinding oil suitable for the material to significantly increase the service life and grinding performance of the tools. For best performance, use at a recommended cutting speed of 15-20 m/s. This achieves an ideal compromise between stock removal rate, surface finish, temperature load on the workpiece and tool wear. Increasing the cutting speed results in a slightly finer surface finish. Increasing the contact pressure results in a slightly coarser surface. The softer the material to be machined, the coarser the surface (when using , An increase in the stock removal rate should be achieved by using a coarser grit size and not by increasing the contact pressure in order to prevent unnecessary tool wear and thermal stress on the workpiece. Reducing the contact pressure and peripheral speed and adding grinding oil reduces tool wear and the temperature load on the workpiece. - Machinable materials: Malleable cast iron, steels up to 1,200 N/mm² ( 54 HRC, grey/spheroidal cast iron (GG/GJL, GGG/GJS), aluminium - Machining tasks: Levelling, weld seam processing, surface processing, deburring, structuring (matting, line matting and satin finishing), fine grinding in stages - Width: 15mm - Note: PFERDERGONOMICS recommends flap discs in order to sustainably reduce the vibration and noise generated during use and to improve working comfort. - Length, shaft: 40mm - RPM, opt.: 9600RPM - Safety instructions: For safety reasons, the specified maximum permissible speed must never be exceeded. The contact pressure must be significantly reduced if the specified optimum speed is exceeded. Safety is only guaranteed if the clamping length is at least 15 mm and the specified maximum speed is not exceeded with open shank lengths. - Advantages: Consistently high material removal over the entire service life, as new, aggressive abrasive is constantly released. Optimum contour adaptation due to high flexibility. Can be used very close to edges and at angles thanks to the flat cast core design. - Grit size: 120 - Max. speed: 19100 min-¹ - Abrasive: Aluminium oxide A - Material suitability Aluminium: limited suitability - Material suitability cast iron: very suitable - Material suitability steel: very suitable - Material: Aluminium oxide - Ø: 40 mm - Height: 15 mm - Material suitability plastic: limited suitability - Brand: PFERD For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!
€11,40
-
NORTON CLIPPER Norton Clipper Diamantschleiftopf Classic CG ( 4200001363 ) 180 mm 22,23 mm
Lieferumfang:- 1x NORTON CLIPPER Diamantschleiftopf 180 mmProduktbeschreibung:mit iHD-Technologie™ · für Winkelschleifer · Oberflächenbearbeitung aller allgemeinen Baumaterialien, auch sehr gut geeignet für abrasive Materialien · kleinere Segmente sehr gut für harte Materialien geeignet · flache Seiten vermeiden eine Beschädigung von Wänden und Decken bei der Anwendung · hoher Materialabtrag, hohe Standzeit · große Belüftungslöcher sorgen für eine bessere Kühlung und weniger HitzeentwicklungTechnische Daten:- Ø: 180 mm- Bohrung: 22,23 mm- Einsatzgebiet: Beton, Stahlbeton, Naturstein - Marke: NORTON CLIPPERBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!
-
NORTON CLIPPER Norton Clipper Diamantschleiftopf Classic CG ( 4200001362 ) 125 mm 22,23 mm
Lieferumfang:- 1x NORTON CLIPPER Diamantschleiftopf 125 mmProduktbeschreibung:mit iHD-Technologie™ · für Winkelschleifer · Oberflächenbearbeitung aller allgemeinen Baumaterialien, auch sehr gut geeignet für abrasive Materialien · kleinere Segmente sehr gut für harte Materialien geeignet · flache Seiten vermeiden eine Beschädigung von Wänden und Decken bei der Anwendung · hoher Materialabtrag, hohe Standzeit · große Belüftungslöcher sorgen für eine bessere Kühlung und weniger HitzeentwicklungTechnische Daten:- Ø: 125 mm- Bohrung: 22,23 mm- Einsatzgebiet: Beton, Stahlbeton, Naturstein - Marke: NORTON CLIPPERBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!
-
NORTON CLIPPER Norton Clipper Diamantschleiftopf Classic CG ( 4200001361 ) 100 mm 22,23 mm
Lieferumfang:- 1x NORTON CLIPPER Diamantschleiftopf 100 mmProduktbeschreibung:mit iHD-Technologie™ · für Winkelschleifer · Oberflächenbearbeitung aller allgemeinen Baumaterialien, auch sehr gut geeignet für abrasive Materialien · kleinere Segmente sehr gut für harte Materialien geeignet · flache Seiten vermeiden eine Beschädigung von Wänden und Decken bei der Anwendung · hoher Materialabtrag, hohe Standzeit · große Belüftungslöcher sorgen für eine bessere Kühlung und weniger HitzeentwicklungTechnische Daten:- Ø: 100 mm- Bohrung: 22,23 mm- Einsatzgebiet: Beton, Stahlbeton, Naturstein - Marke: NORTON CLIPPERBei gewerblicher Nutzung beachten Sie bitte die Bauvorschriften!
-
MÜLLER Müller felt polishing disc ( 4000843476 ) Ø200xW25x20mm wool felt
Wed, 11/12/2025
Scope of Delivery: - 1x MÜLLER felt polishing disc Ø200xW25x20mm Product Description: Wool felt - white - can be used in conjunction with polishing paste for surface treatment Technical Data: - Colour: white - Ø: 200 mm - width: 25 mm - Bore: 20 mm - max. speed: 1900 min-¹ - Material suitability INOX: very suitable - Abrasive: Wool felt - Material suitability aluminium: very suitable - Material suitability steel: very suitable - Brand: MÜLLER - Material suitability plastic: very suitablePlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
€54,58
-
MÜLLER Müller felt polishing disc ( 4000843475 ) Ø150xW20x20mm wool felt
Wed, 11/12/2025
Scope of Delivery: - 1x MÜLLER felt polishing disc Ø150xW20x20mm Product Description: Wool felt - white - can be used in conjunction with polishing paste for surface treatment Technical Data: - Colour: white - Ø: 150 mm - width: 20 mm - Bore: 20 mm - max. speed: 2540 min-¹ - Material suitability INOX: very suitable - Abrasive: Wool felt - Material suitability aluminium: very suitable - Material suitability steel: very suitable - Brand: MÜLLER - Material suitability plastic: very suitablePlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
€33,96
-
MÜLLER Müller felt polishing disc ( 4000843474 ) Ø125xW20x20mm wool felt
Wed, 11/12/2025
Scope of Delivery: - 1x MÜLLER felt polishing disc Ø125xW20x20mm Product Description: Wool felt - white - can be used in conjunction with polishing paste for surface treatment Technical Data: - Colour: white - Ø: 125 mm - width: 20 mm - Bore: 20 mm - max. speed: 3050 min-¹ - Material suitability INOX: very suitable - Abrasive: Wool felt - Material suitability aluminium: very suitable - Material suitability steel: very suitable - Brand: MÜLLER - Material suitability plastic: very suitablePlease observe the building regulations for commercial use!For commercial use, please observe the building regulations!
€25,93
I18n Error: Missing interpolation value "number1" for "You have seen {{ number1 }} out of {{ number2 }} products"